Scattering of Water Waves by Dual Symmetric Inclined Floating Porous Barriers Using the DBEM

The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.

Application of dual reciprocity boundary element method to predict acoustic attenuation characteristics of marine engine exhaust silencers

In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers, a dual reciprocity boundary element method (DRBEM) was developed. The acoustic governing equation in three-dimensional potential flow was derived first, and then the DRBEM numerical procedure is given. Compared to the conventional boundary element method (CBEM), the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation, so it is suitable for the cases with higher Mach number subsonic flow. For complex exhaust silencers, it is difficult to apply the single-domain boundary element method, so a substructure approach based on the dual reciprocity boundary element method is presented. The experiments for measuring transmission loss of silencers are conducted, and the experimental setup and measurements are explained. The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements. The good agreements between predictions and measurements are observed, which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.

APPLICATION OF THE DUAL RECIPROCITY BOUNDARY ELEMENT METHOD TO SOLUTION OF NONLINEAR DIFFERENTIAL EQUATION

In this paper the dual reciprocity boundary element method is employed to solve nonlinear differential equation del(2) u + u + epsilon u(3) = b. Results obtained in an example have a good agreement with those by FEM and show the applicability and simplicity of dual reciprocity method (DRM) in solving nonlinear differential equations.

NEW TYPE OF DUAL BEM AND GREEN'S-FUNCTION-LIBRARY STRATEGY FOR FRACTURE ANALYSIS IN COMPLEX STRUCTURES

A new type of dual boundary integral equations(DBIE)is presented first,through which,a smaller system of equations needs to be solved in fracture analysis.Then a non-conforming crack tip element in two-dimensional problems is proposed.The exact formula for the hypersingular integral over the non-con- forming crack tip element is given next.By virtue of Green's-function-library strategy,a series of stress in- tensity factors(SIF)of different crack orientations,locations and/or sizes in a complicated structure can be obtained easily and efficiently.Finally,several examples of fracture analysis in two dimensions are given to demonstrate the accuracy and efficiency of the method proposed.

Dynamic Behaviors of a Moored Floating Structure with Flexible Skirts

A numerical model was developed by using the dual boundary element method to investigate the dynamic behavior of a moored floating structure with a pair of vertical and flexible skirts attached at its bottom in the linear wave field. Theoretical conception is based on potential theory with linear external forces. The motions of the structure were assumed to be small and linear. The flexible skirts mounted beneath the structure were assumed uniform flexural rigidity and the thickness of the skirts was negligible. Comparison between the present model and Gesraha＇s solution was made to verify the results for a moored floating structure with or without rigid skirts. The influence of the skirt rigidity on the moored floating structure, moored lines and waves is investigated in this study. The results show that, the natural frequencies of structure＇s oscillation, moored force, wave reflection and transmission tend to the region of short-period waves when the flexible rigidity gradually decreases. Positive correlation exists between the aft mooring force and the pitch motion of the floating structure.

NUMERICAL MODELING OF TRANSIENT MAGNETO-THERMO-VISCOELASTIC WAVES IN A ROTATING NONHOMOGENEOUS ANISOTROPIC SOLID UNDER INITIAL STRESS

A numerical model based on the dual-reciprocity boundary element method(DRBEM)for studying the transient magneto-thermo-viscoelastic waves in a rotating nonhomogeneous anisotropic solid is presented.The formulation is tested through its application to the problem of an initially stressed solid placed in a constant primary magnetic field acting in the direction of the z-axis and rotating about this axis with a constant angular velocity.In the case of plane deformation,a numerical scheme for the implementation of the method is presented and the numerical computations are carried out for the temperature,displacement components and thermal stress components.The validity of DRBEM is examined by considering a magneto-thermo-viscoelastic solid occupies a rectangular region and good agreement is obtained with existent results.The results obtained are presented graphically to show the influence of initial stress on the displacement components and thermal stress components.