In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existi...In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.展开更多
A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were li...A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.展开更多
针对纯电动汽车两挡双离合自动变速器(two-speed dual-clutch transmission,2DCT)换挡控制模型及参数的不确定性和存在的未知干扰,提出了一种线性自抗扰(linear active disturbance rejection controller,LADRC)换挡控制策略。首先建立2...针对纯电动汽车两挡双离合自动变速器(two-speed dual-clutch transmission,2DCT)换挡控制模型及参数的不确定性和存在的未知干扰,提出了一种线性自抗扰(linear active disturbance rejection controller,LADRC)换挡控制策略。首先建立2DCT换挡过程动力学模型,并分析了换挡过程;然后考虑控制模型的不确定性及未知干扰,将LADRC控制器应用到换挡过程对期望角速度进行跟踪,并采用扩张状态观测器(extended state observer,ESO)对扰动进行实时估计,并加以补偿,最后与PID控制进行对比。仿真和实验结果表明,该控制器跟踪误差更小,鲁棒性强,能保证良好的换挡品质。展开更多
基金Supported by Defense Advanced Research Support Project(62301030303)111 Project(B08043)
文摘In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.
基金Science and Technology Commission of Shanghai Municipality,China (No. 08dz1150401)
文摘A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.
文摘针对纯电动汽车两挡双离合自动变速器(two-speed dual-clutch transmission,2DCT)换挡控制模型及参数的不确定性和存在的未知干扰,提出了一种线性自抗扰(linear active disturbance rejection controller,LADRC)换挡控制策略。首先建立2DCT换挡过程动力学模型,并分析了换挡过程;然后考虑控制模型的不确定性及未知干扰,将LADRC控制器应用到换挡过程对期望角速度进行跟踪,并采用扩张状态观测器(extended state observer,ESO)对扰动进行实时估计,并加以补偿,最后与PID控制进行对比。仿真和实验结果表明,该控制器跟踪误差更小,鲁棒性强,能保证良好的换挡品质。
