This paper presents an exact analytical subdomain model of dual-stator consequent-pole permanent-magnet(DSCPPM)machines accounting for tooth-tips,which can accurately predict the armature reaction field distribution i...This paper presents an exact analytical subdomain model of dual-stator consequent-pole permanent-magnet(DSCPPM)machines accounting for tooth-tips,which can accurately predict the armature reaction field distribution in DSCPPM machines.In the proposed subdomain model,the field domain is composed of four types of sub-regions,viz.magnets,outer/inner air gaps,slots and slot openings.The analytical expressions of vector potential in each sub-region are determined by boundary and interface conditions.In comparison to the analytically predicted results,the corresponding flux density field distributions computed by finite element(FE)method are analyzed,which confirms the excellent accuracy of the developed subdomain model.展开更多
Tooth-tip Leakage flux(TLF)has a major effect on the prediction of air-gap flux distribution and electromagnetic torque in the permanent magnet(PM)machines.Therefore,deriving a model for TLF is necessary for machine d...Tooth-tip Leakage flux(TLF)has a major effect on the prediction of air-gap flux distribution and electromagnetic torque in the permanent magnet(PM)machines.Therefore,deriving a model for TLF is necessary for machine design and optimization.Accurate modeling of TLF can lead to fast and precise solutions,which ease the analysis of electromagnetic devices.It also provides the opportunity to increase torque density by more efficient utilization of PM’s volume and prevent saturation in machine optimization.This paper presents a method for modeling and analyzing TLFs in a radial-flux dual-stator permanent magnet(DSPM)machine with diametrically magnetized cylindrical permanent magnets(DMCPM)in series and parallel magnetic circuit structures.In this model,some expressions in terms of machine dimensions are derived for the TLF analysis.Finite element method(FEM)is applied to validate the proposed model.Results indicate that the maximum error between the proposed model and FEM is insignificant(less than 6%).Finally,by a prototyped machine the validity of the proposed model was investigated with the experimental tests.展开更多
Based on analysis and calculation of the relation between current harmonics and MMF harmonics in the dual-stator winding multi-phase high-speed induction gen-erator with a rectifier load, a new idea, which divides the...Based on analysis and calculation of the relation between current harmonics and MMF harmonics in the dual-stator winding multi-phase high-speed induction gen-erator with a rectifier load, a new idea, which divides the generator system into two sub-systems to be analyzed individually, is presented. For the sub-system of the 12-phase power winding with a rectifier load, the loop current method is used to establish network equation set in terms of the network graph theory. The numerical stability problem is solved by alternating use of fixed time-step and varied time-step, and the voltage and current with their fundamental components of the power winding are obtained. For the other sub-system of the induction generator with dual-stator winding and solid cage rotor, the electromagnetic field analysis method and the multi-variable optimization approach are combined to get the con-trol winding current and stator frequency. Calculated results well match experiment results, indicating that the new proposed method is of effectiveness and high ac-curacy.展开更多
In the multi-radar networking system,aiming at the problem of locating long-distance targets synergistically with difficulty and low accuracy,a dual-station joint positioning method based on the target measurement err...In the multi-radar networking system,aiming at the problem of locating long-distance targets synergistically with difficulty and low accuracy,a dual-station joint positioning method based on the target measurement error feature complementarity is proposed.For dual-station joint positioning,by constructing the target positioning error distribution model and using the complementarity of spatial measurement errors of the same long-distance target,the area with high probability of target existence can be obtained.Then,based on the target distance information,the midpoint of the intersection between the target positioning sphere and the positioning tangent plane can be solved to acquire the target's optimal positioning result.The simulation demonstrates that this method greatly improves the positioning accuracy of target in azimuth direction.Compared with the traditional the dynamic weighted fusion(DWF)algorithm and the filter-based dynamic weighted fusion(FBDWF)algorithm,it not only effectively eliminates the influence of systematic error in the azimuth direction,but also has low computational complexity.Furthermore,for the application scenarios of multi-radar collaborative positioning and multi-sensor data compression filtering in centralized information fusion,it is recommended that using radar with higher ranging accuracy and the lengths of baseline between radars are 20–100 km.展开更多
基金This work was supported by the National Natural Science Foundation of China under Grant 51677169 and Grant 51637009 and by the Fundamental Research Funds for the Central Universities under Grant 2017QNA4016.
文摘This paper presents an exact analytical subdomain model of dual-stator consequent-pole permanent-magnet(DSCPPM)machines accounting for tooth-tips,which can accurately predict the armature reaction field distribution in DSCPPM machines.In the proposed subdomain model,the field domain is composed of four types of sub-regions,viz.magnets,outer/inner air gaps,slots and slot openings.The analytical expressions of vector potential in each sub-region are determined by boundary and interface conditions.In comparison to the analytically predicted results,the corresponding flux density field distributions computed by finite element(FE)method are analyzed,which confirms the excellent accuracy of the developed subdomain model.
文摘Tooth-tip Leakage flux(TLF)has a major effect on the prediction of air-gap flux distribution and electromagnetic torque in the permanent magnet(PM)machines.Therefore,deriving a model for TLF is necessary for machine design and optimization.Accurate modeling of TLF can lead to fast and precise solutions,which ease the analysis of electromagnetic devices.It also provides the opportunity to increase torque density by more efficient utilization of PM’s volume and prevent saturation in machine optimization.This paper presents a method for modeling and analyzing TLFs in a radial-flux dual-stator permanent magnet(DSPM)machine with diametrically magnetized cylindrical permanent magnets(DMCPM)in series and parallel magnetic circuit structures.In this model,some expressions in terms of machine dimensions are derived for the TLF analysis.Finite element method(FEM)is applied to validate the proposed model.Results indicate that the maximum error between the proposed model and FEM is insignificant(less than 6%).Finally,by a prototyped machine the validity of the proposed model was investigated with the experimental tests.
基金Supported by the National Natural Science Foundation of China (Grant No. 50747024)
文摘Based on analysis and calculation of the relation between current harmonics and MMF harmonics in the dual-stator winding multi-phase high-speed induction gen-erator with a rectifier load, a new idea, which divides the generator system into two sub-systems to be analyzed individually, is presented. For the sub-system of the 12-phase power winding with a rectifier load, the loop current method is used to establish network equation set in terms of the network graph theory. The numerical stability problem is solved by alternating use of fixed time-step and varied time-step, and the voltage and current with their fundamental components of the power winding are obtained. For the other sub-system of the induction generator with dual-stator winding and solid cage rotor, the electromagnetic field analysis method and the multi-variable optimization approach are combined to get the con-trol winding current and stator frequency. Calculated results well match experiment results, indicating that the new proposed method is of effectiveness and high ac-curacy.
文摘In the multi-radar networking system,aiming at the problem of locating long-distance targets synergistically with difficulty and low accuracy,a dual-station joint positioning method based on the target measurement error feature complementarity is proposed.For dual-station joint positioning,by constructing the target positioning error distribution model and using the complementarity of spatial measurement errors of the same long-distance target,the area with high probability of target existence can be obtained.Then,based on the target distance information,the midpoint of the intersection between the target positioning sphere and the positioning tangent plane can be solved to acquire the target's optimal positioning result.The simulation demonstrates that this method greatly improves the positioning accuracy of target in azimuth direction.Compared with the traditional the dynamic weighted fusion(DWF)algorithm and the filter-based dynamic weighted fusion(FBDWF)algorithm,it not only effectively eliminates the influence of systematic error in the azimuth direction,but also has low computational complexity.Furthermore,for the application scenarios of multi-radar collaborative positioning and multi-sensor data compression filtering in centralized information fusion,it is recommended that using radar with higher ranging accuracy and the lengths of baseline between radars are 20–100 km.
基金This work is supported by the National Natural Science Foundation of China(52275009,52037002,52207038)the National Double First-classConstruction Special Funds(4316002181)the Fundamental Research Funds for the Central Universities(3216002101A2,3216002209A1).
