In this work, anthropometric data measured from three-year-old Nigerian child were compared with United States anthropometric database collected by Snyder, 1977 which formed the basis of US anthropometry used today. F...In this work, anthropometric data measured from three-year-old Nigerian child were compared with United States anthropometric database collected by Snyder, 1977 which formed the basis of US anthropometry used today. Further comparison was also carried out with the dimensions of crash dummies: Hybrid III three-year-old (HIII 3YO) and Q3s dummies in order to determine the validity of using such crash dummies for safety evaluation of cars and child restraint systems (CRS) used for Nigerian children. Anthropometric survey was performed on 30 Nigerian children aged 2.5 to 3.5 years old. Twenty three standard measurements were taken from each child including the weight, height and circumferences etc. Various percentiles mean and standard deviation values were obtained and compared with international database. As observed, the dimensions of three-year-old Nigerian child appeared to be about 25% lower than US data reported by Snyder. Significant difference was also found between the dimensions of three-year-old Nigerian child and crash dummies. This study provides the external dimensions of 3-year-old Nigerian child that could be used for crash dummy and CRS design.展开更多
In this paper,to study the mechanical responses of a solid propellant subjected to ultrahigh acceleration overload during the gun-launch process,specifically designed projectile flight tests with an onboard measuremen...In this paper,to study the mechanical responses of a solid propellant subjected to ultrahigh acceleration overload during the gun-launch process,specifically designed projectile flight tests with an onboard measurement system were performed.Two projectiles containing dummy HTPB propellant grains were successfully recovered after the flight tests with an ultrahigh acceleration overload value of 8100 g.The onboard-measured time-resolved axial displacement,contact stress and overload values were successfully obtained and analysed.Uniaxial compression tests of the dummy HTPB propellant used in the gunlaunched tests were carried out at low and intermediate strain rates to characterize the propellant's dynamic properties.A linear viscoelastic constitutive model was employed and applied in finite-element simulations of the projectile-launching process.During the launch process,the dummy propellant grain exhibited large deformation due to the high acceleration overload,possibly leading to friction between the motor case and propellant grain.The calculated contact stress showed good agreement with the experimental results,though discrepancies in the overall displacement of the dummy propellant grain were observed.The dynamic mechanical response process of the dummy propellant grain was analysed in detail.The results can be used to estimate the structural integrity of the analysed dummy propellant grain during the gun-launch process.展开更多
A power MOSFET with integrated split gate and dummy gate(SD-MOS) is proposed and demonstrated by the TCAD SENTAURUS.The split gate is surrounded by the source and shielded by the dummy gate.Consequently,the coupling a...A power MOSFET with integrated split gate and dummy gate(SD-MOS) is proposed and demonstrated by the TCAD SENTAURUS.The split gate is surrounded by the source and shielded by the dummy gate.Consequently,the coupling area between the split gate and the drain electrode is reduced,thus the gate-to-drain charge(Q_(GD)),reverse transfer capacitance(C_(RSS)) and turn-off loss(E_(off)) are significantly decreased.Moreover,the MOS-channel diode is controlled by the dummy gate with ultra-thin gate oxide t_(ox),which can be turned on before the parasitic P-base/N-drift diode at the reverse conduction,then the majority carriers are injected to the N-drift to attenuate the minority injection.Therefore,the reverse recovery charge(Q_(RR)),time(T_(RR)) and peak current(I_(RRM)) are effectively reduced at the reverse freewheeling state.Additionally,the specific on-resistance(R_(on,sp)) and breakdown voltage(BV) are also studied to evaluate the static properties of the proposed SD-MOS.The simulation results show that the Q_(GD) of 6 nC/cm^(2),the C_(RSS) of 1.1 pF/cm^(2) at the V_(DS) of 150 V,the QRR of 1.2 μC/cm^(2) and the R_(on,sp) of 8.4 mΩ·cm^(2) are obtained,thus the figures of merit(FOM) including Q_(GD) ×R_(on,sp) of50 nC·mΩ,E_(off) × R_(on,sp) of 0.59 mJ·mΩ and the Q_(RR) × R_(on,sp) of 10.1 μC·mΩ are achieved for the proposed SD-MOS.展开更多
Dear Editor,Dummy attack(DA), a deep stealthy but impactful data integrity attack on power industrial control processes, is recently recognized as hiding the corrupted measurements in normal measurements. In this lett...Dear Editor,Dummy attack(DA), a deep stealthy but impactful data integrity attack on power industrial control processes, is recently recognized as hiding the corrupted measurements in normal measurements. In this letter, targeting a more practical case, we aim to detect the oneshot DA, with the purpose of revealing the DA once it is launched.Specifically, we first formulate an optimization problem to generate one-shot DAs. Then, an unsupervised data-driven approach based on a modified local outlier factor(MLOF) is proposed to detect them.展开更多
In order to investigate the existence of a stable long-run equilibrium relationship between economic growth and consumption in China, the relationship between the gross domestic product （GDP） and consumption in Chin...In order to investigate the existence of a stable long-run equilibrium relationship between economic growth and consumption in China, the relationship between the gross domestic product （GDP） and consumption in China was investigated by the cointegration analysis method. Using the Engle-Granger （EG） test and considering the possibility of structural changes, the impact of external economic shocks on the long-run equilibrium relationship between economic growth and consumption in China was analyzed. Analysis results show that without considering structural changes, the EG test cannot detect cointegration in the series subjected to structural changes; in considering structural changes, cointegration is successfully detected by specifying the dummy variable. In addition, the error correction models were constructed in different periods. This study verifies the existence of a long-run equilibrium relationship between economic growth and consumption in China, and this relationship has significantly changed in 1989 and 1997, respectively.展开更多
Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（a...Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.展开更多
PIT tests are usually performed when a mass distribution of High Explosive(H.E) projectile fragments is required. This paper shows the underwater detonation effects of 60 mm, M90 H.E. mortar bomb filled with Comp. B o...PIT tests are usually performed when a mass distribution of High Explosive(H.E) projectile fragments is required. This paper shows the underwater detonation effects of 60 mm, M90 H.E. mortar bomb filled with Comp. B on cylindrical concrete structure(concrete pipe closed at one end-similar to a PIT test)which is 2 m high(inner height) with inner diameter of also 2 m. Thickness of both wall and bottom of a pipe is 0.35 m. Detailed characteristics of concrete which is used for manufacturing of a pipe are specified. Mortar bomb is submerged directly in to the water(no free airspace around the bomb) with the nose pointing to the bottom of a pipe. Number and mass of fragments after detonation are presented by table and photographs. Fragments of dummy fuze, through which blasting cap was protruded, are collected and reassembled to form a shape of a fuze after detonation where expanding of fuze material due to a detonation products is visualized. After underwater detonation, detonation of the same mortar bomb is performed in an empty pipe and the effects of this kind of detonation are observed. Distance at which fragments generated from submerged mortar bomb will not reach concrete pipes wall is also determined.展开更多
Given the increasing use of glass mat-reinforced thermoplastic(GMT)composites,the formability of GMT sheets is currently a topic of research.A new sheet forming process for solidified GMT was developed.In this process...Given the increasing use of glass mat-reinforced thermoplastic(GMT)composites,the formability of GMT sheets is currently a topic of research.A new sheet forming process for solidified GMT was developed.In this process,a GMT sheet was sandwiched by dummy metallic sheets during deep drawing.The dummy metallic sheets acted as protective materials and media for heating the GMT sheet.In this study,tensile tests of GMT specimens were carried out under different temperature conditions.The effect of temperature on the tensile deformation was analyzed.The effect of temperature on the deep drawing process of GMT sheets with dummy sheets was further investigated.Finite element method(FEM)was conducted to simulate the deep drawing process.In the drawing force rising stage,the law of drawing force with the depth of the drawing was analyzed using FEM and experiments.展开更多
A fluorescent competitive assay for melamine was first developed utilizing dummy molecularly imprinted polymers（DMIPs） as artificial antibodies. This method is based on the competition between fluorescent substances...A fluorescent competitive assay for melamine was first developed utilizing dummy molecularly imprinted polymers（DMIPs） as artificial antibodies. This method is based on the competition between fluorescent substances and the unlabeled analyte for binding sites in synthesized DMIPs and the decreased binding of fluorescent substances to DMIPs due to increased concentrations of melamine in the solutions. DMIPs for melamine were synthesized under a hot water bath in the presence of the initiator azobisisobutyronitrile（AIBN） using 2,4-diamino-6-methyl-1,3,5-triazine（DAMT） as a dummy template, methacrylic acid（MAA） as a functional monomer, and ethylene glycol dimethacrylate（EGDMA） as a crosslinking agent. The adsorption capacity and selectivity of DMIPs for melamine were evaluated by the isothermal adsorption curve and Scatchard analysis. The evaluation results showed that the synthesized DMIPs had specific recognition sites for melamine and the maximum adsorption amount was 1 066.33 μg g^（-1）. Later, 5-（4,6-d ichlorotriazinyl） amino fluorescein（DTAF） with a triazine ring, which s lightly resembles m elamine, w as selected as the fluorescent substance. The fluorescent competitive assay using DMIPs as t he antibody mimics was finally established by selecting and optimizing the reaction solvents, DMIPs amount, DTAF concentration, and incubation time. The optimal detection system showed a linear response w ithin range of 0.05-40 mg L^（-1） and the limit of detection（LOD） was 1.23 μg L^（-1）. It was successfully applied to the detection of melamine in spiked milk samples wi th satisfactory recoveries（71.9 to 86.3%）. According to the comparative analysis, the result of optimized fluorescent competitive assay re vealed excellent agreement with the HPLC-MS/MS result for melamine.展开更多
文摘In this work, anthropometric data measured from three-year-old Nigerian child were compared with United States anthropometric database collected by Snyder, 1977 which formed the basis of US anthropometry used today. Further comparison was also carried out with the dimensions of crash dummies: Hybrid III three-year-old (HIII 3YO) and Q3s dummies in order to determine the validity of using such crash dummies for safety evaluation of cars and child restraint systems (CRS) used for Nigerian children. Anthropometric survey was performed on 30 Nigerian children aged 2.5 to 3.5 years old. Twenty three standard measurements were taken from each child including the weight, height and circumferences etc. Various percentiles mean and standard deviation values were obtained and compared with international database. As observed, the dimensions of three-year-old Nigerian child appeared to be about 25% lower than US data reported by Snyder. Significant difference was also found between the dimensions of three-year-old Nigerian child and crash dummies. This study provides the external dimensions of 3-year-old Nigerian child that could be used for crash dummy and CRS design.
文摘In this paper,to study the mechanical responses of a solid propellant subjected to ultrahigh acceleration overload during the gun-launch process,specifically designed projectile flight tests with an onboard measurement system were performed.Two projectiles containing dummy HTPB propellant grains were successfully recovered after the flight tests with an ultrahigh acceleration overload value of 8100 g.The onboard-measured time-resolved axial displacement,contact stress and overload values were successfully obtained and analysed.Uniaxial compression tests of the dummy HTPB propellant used in the gunlaunched tests were carried out at low and intermediate strain rates to characterize the propellant's dynamic properties.A linear viscoelastic constitutive model was employed and applied in finite-element simulations of the projectile-launching process.During the launch process,the dummy propellant grain exhibited large deformation due to the high acceleration overload,possibly leading to friction between the motor case and propellant grain.The calculated contact stress showed good agreement with the experimental results,though discrepancies in the overall displacement of the dummy propellant grain were observed.The dynamic mechanical response process of the dummy propellant grain was analysed in detail.The results can be used to estimate the structural integrity of the analysed dummy propellant grain during the gun-launch process.
基金Project supported by the National Natural Science Foundation of China (Grants No. 61604027 and 61704016)the Chongqing Natural Science Foundation, China (Grant No. cstc2020jcyj-msxmX0550)。
文摘A power MOSFET with integrated split gate and dummy gate(SD-MOS) is proposed and demonstrated by the TCAD SENTAURUS.The split gate is surrounded by the source and shielded by the dummy gate.Consequently,the coupling area between the split gate and the drain electrode is reduced,thus the gate-to-drain charge(Q_(GD)),reverse transfer capacitance(C_(RSS)) and turn-off loss(E_(off)) are significantly decreased.Moreover,the MOS-channel diode is controlled by the dummy gate with ultra-thin gate oxide t_(ox),which can be turned on before the parasitic P-base/N-drift diode at the reverse conduction,then the majority carriers are injected to the N-drift to attenuate the minority injection.Therefore,the reverse recovery charge(Q_(RR)),time(T_(RR)) and peak current(I_(RRM)) are effectively reduced at the reverse freewheeling state.Additionally,the specific on-resistance(R_(on,sp)) and breakdown voltage(BV) are also studied to evaluate the static properties of the proposed SD-MOS.The simulation results show that the Q_(GD) of 6 nC/cm^(2),the C_(RSS) of 1.1 pF/cm^(2) at the V_(DS) of 150 V,the QRR of 1.2 μC/cm^(2) and the R_(on,sp) of 8.4 mΩ·cm^(2) are obtained,thus the figures of merit(FOM) including Q_(GD) ×R_(on,sp) of50 nC·mΩ,E_(off) × R_(on,sp) of 0.59 mJ·mΩ and the Q_(RR) × R_(on,sp) of 10.1 μC·mΩ are achieved for the proposed SD-MOS.
基金supported in part by the Guizhou Provincial Science and Technology Projects(ZK[2022]149)the Guizhou Provincial Research Project for Universities([2022]104)+2 种基金the Special Foundation of Guizhou University([2021]47)the GZU cultivation project of National Natural Science Foundation of China([2020]80)Shanghai Engineering Research Center of Big Data Management,and the National Natural Science Foundation of China(62073285,62061130220)。
文摘Dear Editor,Dummy attack(DA), a deep stealthy but impactful data integrity attack on power industrial control processes, is recently recognized as hiding the corrupted measurements in normal measurements. In this letter, targeting a more practical case, we aim to detect the oneshot DA, with the purpose of revealing the DA once it is launched.Specifically, we first formulate an optimization problem to generate one-shot DAs. Then, an unsupervised data-driven approach based on a modified local outlier factor(MLOF) is proposed to detect them.
文摘In order to investigate the existence of a stable long-run equilibrium relationship between economic growth and consumption in China, the relationship between the gross domestic product （GDP） and consumption in China was investigated by the cointegration analysis method. Using the Engle-Granger （EG） test and considering the possibility of structural changes, the impact of external economic shocks on the long-run equilibrium relationship between economic growth and consumption in China was analyzed. Analysis results show that without considering structural changes, the EG test cannot detect cointegration in the series subjected to structural changes; in considering structural changes, cointegration is successfully detected by specifying the dummy variable. In addition, the error correction models were constructed in different periods. This study verifies the existence of a long-run equilibrium relationship between economic growth and consumption in China, and this relationship has significantly changed in 1989 and 1997, respectively.
文摘Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.
文摘PIT tests are usually performed when a mass distribution of High Explosive(H.E) projectile fragments is required. This paper shows the underwater detonation effects of 60 mm, M90 H.E. mortar bomb filled with Comp. B on cylindrical concrete structure(concrete pipe closed at one end-similar to a PIT test)which is 2 m high(inner height) with inner diameter of also 2 m. Thickness of both wall and bottom of a pipe is 0.35 m. Detailed characteristics of concrete which is used for manufacturing of a pipe are specified. Mortar bomb is submerged directly in to the water(no free airspace around the bomb) with the nose pointing to the bottom of a pipe. Number and mass of fragments after detonation are presented by table and photographs. Fragments of dummy fuze, through which blasting cap was protruded, are collected and reassembled to form a shape of a fuze after detonation where expanding of fuze material due to a detonation products is visualized. After underwater detonation, detonation of the same mortar bomb is performed in an empty pipe and the effects of this kind of detonation are observed. Distance at which fragments generated from submerged mortar bomb will not reach concrete pipes wall is also determined.
基金Project(CG2016003001) supported by the Ministry of Human Resources and Social Security of China
文摘Given the increasing use of glass mat-reinforced thermoplastic(GMT)composites,the formability of GMT sheets is currently a topic of research.A new sheet forming process for solidified GMT was developed.In this process,a GMT sheet was sandwiched by dummy metallic sheets during deep drawing.The dummy metallic sheets acted as protective materials and media for heating the GMT sheet.In this study,tensile tests of GMT specimens were carried out under different temperature conditions.The effect of temperature on the tensile deformation was analyzed.The effect of temperature on the deep drawing process of GMT sheets with dummy sheets was further investigated.Finite element method(FEM)was conducted to simulate the deep drawing process.In the drawing force rising stage,the law of drawing force with the depth of the drawing was analyzed using FEM and experiments.
基金supported by the National Natural Science Foundation of China (31260620, 31471654)the Special Fund for Agro-scientific Research in the Public Interest of China (201203094)
文摘A fluorescent competitive assay for melamine was first developed utilizing dummy molecularly imprinted polymers（DMIPs） as artificial antibodies. This method is based on the competition between fluorescent substances and the unlabeled analyte for binding sites in synthesized DMIPs and the decreased binding of fluorescent substances to DMIPs due to increased concentrations of melamine in the solutions. DMIPs for melamine were synthesized under a hot water bath in the presence of the initiator azobisisobutyronitrile（AIBN） using 2,4-diamino-6-methyl-1,3,5-triazine（DAMT） as a dummy template, methacrylic acid（MAA） as a functional monomer, and ethylene glycol dimethacrylate（EGDMA） as a crosslinking agent. The adsorption capacity and selectivity of DMIPs for melamine were evaluated by the isothermal adsorption curve and Scatchard analysis. The evaluation results showed that the synthesized DMIPs had specific recognition sites for melamine and the maximum adsorption amount was 1 066.33 μg g^（-1）. Later, 5-（4,6-d ichlorotriazinyl） amino fluorescein（DTAF） with a triazine ring, which s lightly resembles m elamine, w as selected as the fluorescent substance. The fluorescent competitive assay using DMIPs as t he antibody mimics was finally established by selecting and optimizing the reaction solvents, DMIPs amount, DTAF concentration, and incubation time. The optimal detection system showed a linear response w ithin range of 0.05-40 mg L^（-1） and the limit of detection（LOD） was 1.23 μg L^（-1）. It was successfully applied to the detection of melamine in spiked milk samples wi th satisfactory recoveries（71.9 to 86.3%）. According to the comparative analysis, the result of optimized fluorescent competitive assay re vealed excellent agreement with the HPLC-MS/MS result for melamine.
