Geology and mineralization of the Duobaoshan supergiant porphyry Cu-Au-Mo-Ag deposit(2.36 Mt)in Heilongjiang Province,China:A review

The reserves of the Duobaoshan porphyry Cu-Au-Mo-Ag deposit(also referred to as the Duobaoshan porphyry Cu deposit)ranks first among the copper deposits in China and 33rd among the porphyry copper deposits in the world.It has proven resources of copper(Cu),molybdenum(Mo),gold(Au),and silver(Ag)of 2.28×10^(6)t,80×10^(3)t,73 t,and 1046 t,respectively.The major characteristics of the Duobaoshan porphyry Cu deposit are as follows.It is located in a zone sandwiched by the Siberian,North China,and paleo-Pacific plates in an island arc tectonic setting and was formed by the Paleozoic mineralization and the Mesozoic mineralization induced by superposition and transformation.The metallogenic porphyries are the Middle Hercynian granodiorite porphyries.The alterations of surrounding rocks are distributed in a ring form.With silicified porphyries at the center,the alteration zones of K-feldspar,biotite,sericite,and propylite occur from inside to outside.This deposit is composed of 215 ore bodies(including 14 major ore bodies)in four mineralized zones.Ore body No.X in the No.3 mineralized zone has the largest resource reserves,accounting for more than 78%of the total reserves of the deposit.Major ore components include Cu,Mo,Au,Ag,Se,and Ga,which have an average content of 0.46%,0.015%,0.16 g/t,1.22 g/t,0.0003%,and 0.001%-0.003%,respectively.The ore minerals of this deposit primarily include pyrite,chalcopyrite,bornite,and molybdenite,followed by magnetite,hematite,rutile,gelenite,and sphalerite.The ore-forming fluids of this deposit were magmatic water in the early metallogenic stage and then the mixture of meteoric water and magmatic water at the late metallogenic stage.The ore-forming fluids experienced three stages.The ore-forming fluids of stageⅠhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 375-650℃,and ore-forming pressure of 110-160 MPa.The ore-forming fluids of stageⅡhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 310-350℃,and ore-forming pressure of 58-80 MPa.The ore-forming fluids of stageⅢhad a hydrochemical type of Na Cl-H_(2)O,an ore-forming temperature of 210-290℃,and ore-forming pressure of 5-12 MPa.The CuAu-Mo-Ag mineralization mainly occurred at stagesⅠandⅡ,with the ore-forming materials having a mixed crust-mantle source.The Duobaoshan porphyry Cu deposit was formed in the initial subduction environment of the Paleo-Asian Ocean Plate during the Early Ordovician.Then,due to the closure of the Mongol-Okhotsk Ocean and the subduction and compression of the Paleo-Pacific Ocean,a composite orogenic metallogenic model of the deposit was formed.In other words,it is a porphyry-epithermal copper-gold polymetallic mineralization system of composite orogeny consisting of Paleozoic island arcs and Mesozoic orogeny and extension.

A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

Application of high-frequency magnetotelluric method in porphyry copper deposit exploration：a case study of Duobaoshan deposit area

The Duobaoshan mine area in Heilongjiang is located in the northeast section of Xingmeng orogenic belt and is in the west side of Hegang Mountain-Heihe fault zone. There exist many deposits in this area,and its metallogenic conditions are superior,which has been one of the hotspots in geological prospecting and metallogenic research in Northeast China. On the basis of previous studies,the authors used the EH-4 electromagnetic imaging system to carry out the data acquisition of three survey lines in Woduhe Village,Duobaoshan Town,Nenjiang County. Through the analysis of apparent resistivity section under TE and TM polarization modes,integrating regional geological data,it is concluded that:(1) the electrical characteristics of the metal ore in this area show a relatively low resistance,and according to its resistivity difference with surrounding rocks,the geometrical structures and apparent resistivity parameters of the low resistivity bodies in the lower section of the survey line are defined,and the electrical anomalies can be identified;(2)faults F1 and F2 may have a good metallogenic environment,so they are recommended for further exploration;(3) low resistance metal ore bodies have good correlation with local small structures or faults,which may play an iconic role for the delineation of key target areas;(4) in the process of using apparent resistivity to define the geometric structures of ore bodies underground,comprehensive analysis integrating the advantages of TE and TM models should be carry out to achieve more reliable inversion results.

Application of Tectono Geochemical Study in Deep Concealed Ore Body Exploration--As the Huize Super-Large Lead-Zinc Deposit an exemple

1 Geological Background of Minerlization or Geologic Setting The northeast of Yunnan1 Pb-Zn-Ag-Ge polymetallic ore district is an important part of the southwestern margin of the Yangtze block Sichuan-Yunnan-Guizhou

Geochronology and geochemistry of the ore-bearing intrusion in the Longgen Lead-Zinc deposit in Tibet and its geological significance

1 Introduction The Longgen Lead-Zinc deposit is located in the southern Gangdise-Nyainqentantanglha plate and belongs to the western section of the Nyainqentantanglha copper-lead-zinc-silver metallogenic belt.In this paper,

Ore-controlling Regularitiesof Structureinthe Lehong Lead-zinc Deposit, Northeastern Yunnan

1 Introduction The Lehonglead-zincdeposit is a large-sized Pb-Zn depositnewly found in recent years in the Sichuan-Yunnan-Guizhou Lead-zinc Poly-metallic Mineralization Area,which occurrenceis strictly

“Structure-Lithologic-Fluid” Metallogenic Coupling of the Wuzhishan Lead-Zinc Deposit in Puding, Guizhou Province

1 Introduction The Wuzhishan lead-zinc ore-concentrated area in Puding is located in the east of the Sichuan,Guizhou and Yunnan lead-zinc metallogenic domain,with the Youjiang-Nanpan River metallogenic province to the

Spectroscopic Features and Formation Conditions of Sphalerite in the Lead-Zinc Deposit, Guangdong,China

Electron paramagnetic resonance spectra, absorption spectra, cathodoluminescence spectra and infrared spectra of sphalerite from the Lechang remoulded sedimentary lead-zinc deposit have been studied so as to provide microscopic evidence for the formation conditions and mineralization stages of the deposit as well as the geochemical processes of mineralization. On the basis of thermodynamic calculations, the stable fields of sphalerite from different mineralization stages were determined and are shown in logfs_2-logfo_2 diagrams; furthermore. the physico-chemical conditions of mineralization and the properties of mineralization solutions are discussed so that reliability of the genetic information provided by the spectroscopy of sphalerite may also be verified. It is suggested that the temperature and pH value of the mineralization system decrease, and so do the fugacities of O_2, S_2, H_2. and H_2S and the activities of HS^- and SO_4^(2-) from the early to late stages of minerahzation.

Metallogenic Prediction of the Peripheral Areas of the Xiyi Concealed Lead-Zinc Deposit in Baoshan City, Yunnan Province

The newly-discovered Xiyi lead-zinc deposit is a large deposit located in the north central Baoshan block of the southern Sanjiang metallogenic belt section, Southwest China.The surface of the deposit is mainly covered by eluvial-deluvial lateritic layer, without any mineralized outcrops. The main concealed orebody V3 is buffed in the depth of 300-500m. The orebodies are controlled by certain stratigraphic horizons, and most are cut by strata with a high angle, while a few occur along the strata. The direct wall rocks are calcisiltite, calclithite, bioclastic calcarenite,

New Zircon U-Pb Age of Devonian Granites in the Niukutou Lead-Zinc Deposit, Qinghai Province and its Significance for Prospecting Blind Orebodies

Object The Eastern Kunlun Orogen(EKO), An important part of the Tethyan orogenic belt in the northern margin of the Qinghai–Tibet Plateau(Li et al., 2014; Ren Haidong et al., 2016), is a key area for geological research and mineral exploration(Li Bile et al., 2015). The Qimantag Mountain is located in middle segment of the EKO, which has experienced the Early Paleozoic and Late Paleozoic–Early

LAWS GOVERNING THE DISTRIBUTION OF LEAD-ZINC DEPOSITS IN CHINA

An attempt is made in this paper to describe the following laws governing the distribution of lead-zinc deposits in China: spatial distribution laws, temporal distribution laws, deep level control laws, and deposits association and zoning laws.

Experiment and Achievement Enlightenment of Integrated Prospecting of Carbonate-Type Lead-Zinc Deposits in the Sichuan-Yunnan-Guizhou Region of China

Mississippi-Valley＇s carbonate-type （MVT） lead-zinc deposits are the most important type of lead-zinc deposits in the southwest of China. In 2013, China Geological Survey Bureau deployed a project named ＂Experimental Investigation of Integrated Prospecting Technology for Concealed Carbonate-Type Lead-Zinc Deposits in the Region of Sichuan, Yunnan and Guizhou Provinces＂. This project has been implemented by the Chengdu Center of China Geological Survey since 2013, and the project has run for 3 years. The general objective of this project is to establish an effective and adaptable integrated prospecting methodology （including geological, geophysical and geochemical techniques） in search for deep concealed lead-zinc deposits.

黑龙江多宝山铜矿区韧性剪切变形时代及其对铜矿化改造的约束

黑龙江多宝山斑岩铜矿主要赋存于奥陶纪花岗闪长岩中,少量发育于奥陶纪花岗闪长斑岩及奥陶系多宝山组安山岩中,铜矿化以浸染状、细脉-浸染状为主。成矿过程经历了斑岩期、剪切变形期。矿区发育韧性剪切变形带,多宝山组、花岗闪长岩、花岗闪长斑岩、安山质凝灰角砾岩及矿体均发生了剪切变形作用,沿剪切面发育绢云母新生矿物。绢云母的坪年龄和正反等时线年龄分别为280.1±1.2 Ma和281.4±1.3 Ma、281.3±1.3 Ma,在误差范围内基本一致,限定矿区韧性剪切变形的时间为早二叠世(约280 Ma)。多宝山斑岩铜矿床主要成矿作用形成于斑岩期,成矿时代为早奥陶世(约475 Ma),早二叠世的韧性剪切变形作用对原生斑岩铜矿化进行了改造,使矿石的铜进一步富集,品位相对增高。

试论中亚造山带东部多宝山矿田斑岩铜浅成低温金系统成矿特征与矿床模型

多宝山矿田位于中亚造山带东段,是目前我国东北地区规模最大、成矿时代最老(477~470 Ma)的斑岩铜钼浅成低温热液金成矿系统,已探明铜、钼、金储量分别可达5 Mt、0.16 Mt和130 t。从成矿系统角度,其成矿特征和矿床模型尚不清晰。本文系统分析了矿床的地质地球化学特征和成矿时代,发现该成矿系统存在两期成矿事件,以第一期为主,发生在早奥陶世;第二期为叠加成矿,发生在晚三叠世。成矿作用具有下部为隐爆角砾状铜矿化、中部为脉状铜矿化、上部为金矿化的空间结构特征,围岩蚀变从中心向两侧依次为钾化黑云母化带、青磐岩化带、黏土化带、碳酸盐化带、绢英岩化带和硅化带。成矿流体主要来源于岩浆水,从多宝山斑岩铜矿到争光浅成热液金矿床呈现大气水加入比例增大的趋势。根据第一期成矿斑岩具有高Ce^(4+)/Ce^(3+)(174~461;均值约290)、高f_(O2)埃达克质岩浆特征,进一步得出主成矿期与古生代古亚洲洋俯冲作用相关的壳幔混源岩浆作用有关。成矿受古火山机构所制约,其北西到南东成矿深度增大与剥蚀程度相关,受铜山逆断层作用效应,暗示铜山断层以南为较好的找矿靶区。最后,本文建立了该区古生代斑岩铜浅成低温热液金成矿系统的矿床模型,以期为该区进一步矿产勘探提供借鉴。

Isotopic Compositions of Sulfur in the Jinshachang Lead–Zinc Deposit, Yunnan, China, and its Implication on the Formation of Sulfur-Bearing Minerals

The Jinshachang lead-zinc deposit is mainly hosted in the Upper Neoproterozoic carbonate rocks of the Dengying Group and located in the Sichuan-Yunnan-Guizhou （SYG） Pb-Zn-Ag multi- metal mineralization area in China. Sulfides minerals including sphalerite, galena and pyrite postdate or coprecipitate with gangue mainly consisting of fluorite, quartz, and barite, making this deposit distinct from most lead-zinc deposits in the SYG. This deposit is controlled by tectonic structures, and most mineralization is located along or near faults zones. Emeishan basalts near the ore district might have contributed to the formation of orebodies. The j34S values of sphalerite, galena, pyrite and barite were estimated to be 3.6‰-13.4‰, 3.7‰-9.0‰, -6.4‰ to 29.2‰ and 32.1‰34.7‰, respectively. In view of the similar δ34S values of barite and sulfates being from the Cambrian strata, the sulfur of barite was likely derived from the Cambrian strata. The homogenization temperatures （T ≈ 134--383℃） of fluid inclusions were not suitable for reducing bacteria, therefore, the bacterial sulfate reduction could not have been an efficient path to generate reduced sulfur in this district. Although thermochemical sulfate reduction process had contributed to the production of reduced sulfur, it was not the main mechanism. Considering other aspects, it can be suggested that sulfur of sulfides should have been derived from magmatic activities. The δ34S values of sphalerite were found to be higher than those of coexisting galena. The equilibrium temperatures calculated by using the sulfur isotopic composition of mineral pairs matched well with the homogenization temperature of fluid inclusions, suggesting that the sulfur isotopic composition in ore-forming fluids had reached a partial equilibrium.

An experimental study on metal precipitation driven by fluid mixing: implications for genesis of carbonate-hosted lead–zinc ore deposits

A type of carbonate-hosted lead–zinc(Pb–Zn)ore deposits, known as Mississippi Valley Type(MVT)deposits, constitutes an important category of lead–zinc ore deposits. Previous studies proposed a fluid-mixing model to account for metal precipitation mechanism of the MVT ore deposits, in which fluids with metal-chloride complexes happen to mix with fluids with reduced sulfur, producing metal sulfide deposition. In this hypothesis, however, the detailed chemical kinetic process of mixing reactions, and especially the controlling factors on the metal precipitation are not yet clearly stated. In this paper, a series of mixing experiments under ambient temperature and pressure conditions were conducted to simulate the fluid mixing process, by titrating the metal-chloride solutions, doping withor without dolomite, and using NaHS solution. Experimental results, combined with the thermodynamic calculations, suggest that H_2S, rather than HS^-or S^(2-),dominated the reactions of Pb and/or Zn precipitation during the fluid mixing process, in which metal precipitation was influenced by the stability of metal complexes and the pH. Given the constant concentrations of metal and total S in fluids, the pH was a primary factor controlling the Pb and/or Zn metal precipitation. This is because neutralizing or neutralized processes for the ore-forming fluids can cause instabilities of Pb and/or Zn chloride complexes and re-distribution of sulfur species, and thus can facilitate the hydrolysis of Pb and Zn ions and precipitation of sulfides. Therefore, a weakly acidic to neutral fluid environment is most favorable for the precipitation of Pb and Zn sulfides associated with the carbonate-hosted Pb–Zn deposits.

Metallogeny of the Baiyangping Lead-Zinc Polymetallic Ore Concentration Area, Northern Lanping Basin of Yunnan Province, China

The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang （the Sanjiang） area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.

Geology, geochronology and geochemistry of large Duobaoshan Cu-Mo-Au orefield in NE China: Magma genesis and regional tectonic implications

Duobaoshan is the largest porphyry-related Cu-Mo-Au orefield in northeastern(NE)Asia,and hosts a number of large-medium porphyry Cu(PCDs),epithermal Au and Fe-Cu skarn deposits.Formation ages of these deposits,from the oldest(Ordovician)to youngest(Jurassic),have spanned across over 300 Ma.No similar orefields of such size and geological complexity are found in NE Asia,which reflects its metallogenic uniqueness in forming and preserving porphyry-related deposits.In this study,we explore the actual number and timing of magmatic/mineralization phases,their respective magma genesis,fertility,and regional tectonic connection,together with the preservation of PCDs.We present new data on the magmatic/mineralization ages(LA-ICP-MS zircon U-Pb,pyrite and molybdenite Re-Os dating),whole-rock geochemistry,and zircon trace element compositions on four representative deposits in the Duobaoshan orefield,i.e.,Duobaoshan PCD,Tongshan PCD,Sankuanggou Fe-Cu skarn,and Zhengguang epithermal Au deposits,and compiled published ones from these and other mineral occurrences in the orefield.In terms of geochronology,we have newly summarized seven magmatic phases in the orefield:(1)Middle-Late Cambrian(506-491 Ma),(2)Early and Middle Ordovician(485-471 Ma and~462 Ma),(3)Late Ordovician(450-447 Ma),(4)Early Carboniferous and Late-Carboniferous to Early Permian(351-345 and 323-291 Ma),(5)Middle-Late Triassic(244-223 Ma),(6)Early-Middle and Late Jurassic(178-168 Ma and~150 Ma),and(7)Early Cretaceous(~112 Ma).Three of these seven major magmatic phases were coeval with ore formation,including(1)Early Ordovician(485-473 Ma)porphyry-type Cu-Mo-(Au),(2)Early-Middle Triassic(246-229 Ma)porphyry-related epithermal Au-(Cu-Mo),and(3)Early Jurassic(177-173 Ma)Fe-Cu skarn mineralization.Some deposits in the orefield,notably Tongshan and Zhengguang,were likely formed by more than one mineralization events.In terms of geochemistry,ore-causative granitoids in the orefield exhibit adakite-like or adakite-normal arc transitional signatures,but those forming the porphyry-/epithermal-type Cu-Mo-Au mineralization are largely confined to the former.The varying but high Sr/Y,Sm/Yb and La/Yb ratios suggest that the ore-forming magmas were mainly crustal sourced and formed at different depths(clinopyroxene-/amphibole-/garnet-stability fields).The adakite-like suites may have formed by partial melting of the thickened lower crust at 35-40 km(for the Early Ordovician arc)and>40 km(for the Middle-Late Triassic arc)depths.The Early Jurassic Fe-Cu skarn orecausative granitoids show an adakitic-normal arc transitional geochemical affinity.These granitoids were likely formed by partial melting of the juvenile lower crust(35-40 km depth),and subsequently modified by assimilation and fractional crystallization(AFC)processes.In light of the geological,geochronological and geochemical information,we proposed the following tectonometallogenic model for the Duobaoshan orefield.The Ordovician Duobaoshan may have been in a continental arc setting during the subduction of the Paleo-Asian Ocean,and formed the porphyry-related deposits at Duobaoshan,Tongshan and Zhengguang.Subduction may have ceased in the latest Ordovician,and the regional tectonics passed into long subsidence and extension till the latest Carboniferous.This extensional tectonic regime and the Silurian terrestrial-shallow marine sedimentation had likely buried and preserved the Ordovician Duobaoshan magmatic-hydrothermal system.The south-dipping Mongol-Okhotsk Ocean subduction from north of the orefield had generated the Middle-Late Triassic continental arc magmatism and the associated Tongshan PCD and Zhengguang epithermal Au mineralization(which superimposed on the Ordovician PCD system).The Middle Jurassic closure of Mongol-Okhotsk Ocean in the northwestern Amuria block(Erguna terrane),and the accompanying Siberia-Amuria collision,may have placed the Paleo-Pacific subduction system in NE China(including the orefield)under compression,and formed the granodiorite-tonalite and Fe-Cu skarn deposits at Sankuanggou and Xiaoduobaoshan.From the Middle Jurassic,the consecutive accretion of Paleo-Pacific arc terranes(e.g.,Sikhote-Alin and Nadanhada)onto the NE Asian continental margin may have gradually distant the Duobaoshan orefield from the subduction front,and consequently arc-type magmatism and the related mineralization faded.The minor Late Jurassic and Cretaceous unmineralized magmatism in the orefield may have triggered mainly by the far-field extension led by the post-collisional(Siberia-Amuria)gravitational collapse and/or Paleo-Pacific backarc-basin opening.