Filtration performance and modeling of granular bed for dust removal from coal pyrolytic vapors

Dust removal from pyrolytic vapors at high temperatures is an obstacle to the industrialization of the coal pyrolysis process.In this work,a granular bed with expanded perlites as filtration media was designed and integrated into a 10 t·d^(–1)coal pyrolysis facility.The testing results showed that around 97.56%dust collection efficiency was achieved.As a result,dust content in tar was significantly lowered.The pressure drop of the granular bed maintained in the range of 356 Pa to 489 Pa.The dust size in the effluent after filtration exhibited a bimodal distribution,which was attributed to the heterogeneity of the dust components.The effects of filtration bed on pyrolytic product yields were also discussed.A modified filtration model based on the macroscopic phenomenological theory was proposed to describe the performance of the granular bed.The computation results were well agreed with the experimental data.

Design and Numerical Simulation of Dust Removal System for Sutomotive Iongitudinal Beam Plasma Cutting

To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams,and reduce the cutting surface quality degradation due to dust,a bottom-side suction dust removal system is designed,and the dust removal effect is optimized through the setting of the following dampers and diversion plates.The result of numerical simulation indicates that the particle collection rate can reach 99.44%,and the field test also proves the effectiveness of the dust removal system,which is of guiding significance for the transformation of other similar dust removal systems.

Effect of photovoltaic panel electric field on the wind speed required for dust removal from the panels

Methods to remove dust deposits by high-speed airflow have significant potential applications,with optimal design of flow velocity being the core technology.In this paper,we discuss the wind speed required for particle removal from photovoltaic(PV)panels by compressed air by analyzing the force exerted on the dust deposited on inclined photovoltaic panels,which also included different electrification mechanisms of dust while it is in contact with the PV panel.The results show that the effect of the particle charging mechanism in the electric field generated by the PV panel is greatly smaller than the effect of the Van der Waals force and gravity,but the effect of the particle charged by the contact electrification mechanism in the electrostatic field is very pronounced.The wind speed required for dust removal from the PV panel increases linearly with the PV panel electric field,so we suggest that the nighttime,when the PV electric field is relatively small,would be more appropriate time for dust removal.The above results are of great scientific importance for accurately grasping the dust distribution law and for achieving scientific removal of dust on PV panels.

Numerical Simulation of Dust Removal in the Cyclone Collector of a Straw Crusher Based on a Discrete Phase Model

The cyclone dust collector is an important subsystem of straw crushers used in agriculture.In the present study,a new type of dust collector with involute morphology is proposed to obtain better dust removal efficiency with respect to that of classical tangential and spiral dust collectors.A discrete phase model(DPM)method is used in synergy with a turbulence model,and the SIMPLE algorithm to simulate the flow field inside the dust collector and the related particle dynamics.It is shown that the internal flow field features a primary swirl,a secondary swirl and blockage effects.Moreover,for the involute dust collector,the tangential velocity in the initial stage and the pressure in the high-pressure area are larger than those obtained for the classical types.The dust removal efficiency is 37.11%,25.3%,and 16.37%for the involute type dust collector,the tangential type and the spiral type,respectively.

Dust removal efficiency of high pressure atomization in underground coal mine

To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensively studied in theory by virtue of related theories of hydromechanics and aerosol.According to actual measurements of flow coefficients and atomization angles of X-type swirl nozzle,computational formula was derived for atomized particle sizes of such a nozzle in conjunction with relevant empirical equation. Moreover, a mathematical model for applying high pressure atomization to dust removal in underground coal mine was also established to deduce theoretical computation formula of fractional efficiency. Then, Matlab was adopted to portray the relation curve between fractional efficiency and influence factors. In addition, a theoretical formula was also set up for removal efficiency of respirable dust and total coal dust based on dust size and frequency distribution equations. In the end,impacts of dust characteristic parameters on various dust removal efficiencies were analyzed.

Water film area and dust removal efficiency of string grilles:a theoretical analysis

Based onmultiphase flowtheory and capillary mechanics,the dimensionless bond number expression of the influence of string grille wire spacing on droplet spreading is derived.Taking a liquid film formed by spreading droplets based on Kelvin correlation,the Young-Laplace equation,and the Hagen-Poiseuille law,an equation for calculating the thickness and height of the liquid film is established with temperature,relative humidity and molar volume of liquid phase as independent variables.According to the theory of string grille filtration and dust removal,a dust removal efficiency calculation model covering the wet string grille wire group is constructed based on the liquid film thickness,height,wire diameter,water film area,and vortex shedding frequency.Finally,a theoretical analysis of the influence of water film area on the efficiency of wet string grille dust removal is carried out based on the spray pressure and the ratio of string grille wire distance to wire diameter.It is found that the effect of spray pressure on water film area and dust removal efficiency is more significant than the string grille wire distance diameter ratio.Moreover,the optimized combination of wet string grille wire distance diameter ratio 0.84,wind speed 3m/s and spray pressure 0.8 MPa is found,which could provide an important reference for engineering applications.

An Automatic Dust Removal Device Based on SCM for Solar Panels

This paper introduces a set of automatic dust removal device for street lamp solar panels. The device realizes the automatic dust removal for street lamp solar panels by three steps consisting of data acquisition, automatic control and mechanical dust removal. Our scheme is as follows, according to the comparison between the actual power generation and the relatively ideal condition of power generation of solar panels, we selectively conduct dust removal operation to panels. The paper demonstrates the feasibiliW of the technology based on the example of street lamp solar panels （40w）. According to the calculation, the solar panels equipped with our device will greatly improve the power generation efficiency of solar panels, which means there will be 32 more degrees generated every year. Extension and application of the technique device will be beneficial for the improvement of solar panels power generation efficiency and the extension of the service life of the panels.

Mechanism of dust removal by a standing wave electric curtain

In this paper,the mechanisms of particle movement on an electric curtain are examined.Intermittent bursts in which particles leaping from a surface of an electric curtain are demonstrated both by numerical simulation and experimental observation.The hopping and surfing modes during particle removal are shown to depend on the particle electric charge and its initial position.The particles initially located on the top of electrode have a large electric charge tend to assume a hopping mode.Transverse movement of the particle initially located between the electrodes is analyzed,and the particle traps along the electric curtain surface are also observed.

Design and implementation of a coal-dust removal device for heavy-haul railway tunnels

The Daqin Railway is China’s first electrified double-track heavy-haul railway line dedicated to coal transportation.Over the years of operation,the tunnels have been covered with a thick layer of coal dust,which also pervades in the air.Worse is that the coal dust has even buried the rail joints in some sections,making the repair and maintenance of the line difficult.This paper introduces a coal-dust removal device for railway tunnels that integrates pipeline transportation with dust-collection techniques.The device is mainly composed of a power system,a conveying system,a dust-filtration and collection system,and a control and protection system.The key technical elements of the system,such as the dust-extraction method and dust-filtration and collection parameters,are optimized based on the characteristics of the coal dust in the tunnel(obtained via field trials),which greatly enhances the adaptability of the device.Coal-dust removal efficiency reached over 20 t/h,which improves the working environment,reduces the intensity of manual work required and solves the problem of coal-dust removal from the most polluted area—within 500 m of the tunnel entrance.

Experimental study of the dust-removal performance of a wet scrubber

A variety of dust control methods are often applied in coal mines,among which the application of wet scrubbers has proven to be an efficient technology for the removal of dust in airstreams,rather than diluting or confining the dust.In this paper,a wet scrubber design was developed.Based on a self-designed experimental test platform,the total dust concentration,respirable dust concentration,air volume,and average pressure drops of wet scrubbers with 12,16,20,and 24 blades were measured under different water intake conditions.The results show that the different water intake levels have only minimal effects on the air volume of the wet scrubbers.However,increased water intake had improved the dust removal efficiency of the wet scrubbers with the same number of blades.The wet scrubber with 16 blades was found to have the best dust removal efficiency at a water intake level of 1.35 m^(3)/h.Its total dust and respirable dust removal efficiency reached 96.81%and 95.59%,respectively.The air volume was 200.4 m^(3)/min,and the average pressure drop was determined to be 169.4 Pa.In addition,when the wet scrubber with 16 blades was applied in a coal preparation plant in China's Shanxi Province,it was observed that the total dust concentration had fallen below 8.1 mg/m^(3),and the respirable dust concentration had fallen below 5.9 mg/m^(3).Therefore,the results obtained in this research investigation provide important references for the use of wet scrubbers to improve coal production environmental conditions.

Mechanism of micro-wetting of highly hydrophobic coal dust in underground mining and new wetting agent development

The internal mechanism of the high hydrophobicity of the coal samples from the Pingdingshan mining area was studied through industrial,element,and surface functional group analysis.Laboratory testing and molecular dynamics simulations were employed to study the impact of three types of surfactants on the surface adsorption properties and wettability of highly hydrophobic bituminous coal.The results show that the surface of highly hydrophobic bituminous coal is compact,rich in inorganic minerals,and poorly wettable and that coal molecules are dominated by hydrophobic functional groups of aromatic rings and aliphatic structures.The wetting performance of surfactants as the intermediate carrier to connect coal and water molecules is largely determined by the interaction force between surfactants and coal(Fs-c)and the interaction force between surfactants and water(Fs-w),which effectively improve the wettability of modified coal dust via modifying its surface electrical properties and surface energy.A new type of wetting agent with a dust removal rate of 89%has been developed through discovery of a compound wetting agent solution with optimal wetting and settling performance.This paper provides theoretical and technical support for removing highly hydrophobic bituminous coal dust in underground mining.

Theoretical and numerical analysis of coal dust separated by centrifugal force for working and heading faces

In order to meet engineering needs of Chinese underground coal mines,a new dust-collecting fan,a device of dust separated by centrifugal force in driven cyclone passageway(DCCP)was designed.In centrifugal dust removal section(CDRS)of DCCP,a general equation is derived from the principle of force equilibrium.According to CDRS structure parameters and fan running parameters,the general equation is simplified,and the simplest equation is calculated numerically by MATLAB.The calculation results illustrate that increasing quantity of air current is against dust removal,but it is beneficial to dust removal by increasing the radius of driven spiral blade and increasing the particle diameter of coal dust.The conclusions show that the dust-collecting structure parameters coupled with the fan running parameters is a novel optimization approach to dust-collection fan for working and heading faces,which is especially suitable for Chinese underground mines.

Effects of structural and operating parameters of ECP fan on dust particles removed in the transition flow regime

An enclosed cyclone passageway(ECP)dust-collecting fan is discussed.The ECP fan separates dust by centrifugal force originating from a driven spiral airflow,and its design takes the constraints of Chinese underground coal mines into consideration.Using the force equilibrium law,a general equation for dust removal in the centrifugal dust removal section(CDRS)of the ECP fan is deduced.This general equation is simplified using the CDRS structure and the fan operating parameters and is analysed numerically.The attractive results show that increases in the airflow rate of the fan,the structural ratio of the ECPs and the radius of the extended axis can improve the dust removal performance of the CDRS.Furthermore,the effects of the structural ratio and the radius on dust removal dominate over that of the flow rate,and the effect of the structural ratio is more significant than that of the radius.

Design and Development of a High Efficiency Carbon- Granular Bed Filter in Industrial Scale

The new dust removal technical route using the carbon-granular bed filter, packed of carbon particles with appropriate grade derive from an online-process vibration sieve, to replace the traditional baggy filter had been developed successfully for capturing the micro-carbon dusts produced from pulverization of petroleum coke, and the green close loop of carbon materials is thus completed in the combined pulverizing and classifying system and pulverized carbon dust removal process. The high dust removal efficiency greater than 99%, low outlet dust concentration less than 100mg·m-3, low pressure drop through dust filtration chamber less than 980Pa, simple and easy design, and flexible and stable operation were achieved also with the carbon-granular bed filter in both bench and industrial scale operations.

Enhancement of Cathode Dust Collection and its Application in Improving the Efficiency of Dry Electrostatic Precipitator

As the main equipment of flue gas dedusting in coal fired boiler,electrostatic precipitator(ESP)can meet the requirements of emission standard for air pollutants from coal-fired power plants through improving the efficiency of ESP and combining with desulfurization system while not installing wet ESP(WESP).This paper introduces the modifications of ESP cathode structure to improve the efficiency of dust collection by reducing the secondary dust loss at cathode.The application of cathode dust collection provides a reference for the improvement of ESP dust collection efficiency.

Diffusion and adoption of environmentally sound technology in China cement industry

From rapid growth of cement industry in China there is serious pollution of powdered dust. After general analysis on factors influencing adoption of environmentally sound technology(EST) as well as economic benefit from adoption of dust removing technology and capital ability of cement firms to invest, the conclusion that the obstacles to EST in China cement sector are different from ones in other sectors was drawn. And then, hindrances to diffusion and adoption of EST in China cement were discussion by empirical study.

The Application of Cold Banding Technology for Dust Removed From BOF Gas Using Dry Dedusting Technology

Firstly, physical and chemical properties of dust removed from BOF gas are analyzed, and then the cold banding technology of dust removed from BOF gas and its application are introduced. Tests have proved that using cooled agglomerated pellets made of the dust removed from BOF gas and small amounts of modified starch as a coolant and slagging agent in steel production can bring about considerable economic, social and environmental benefits.

Removal of dust from flue gas in magnetically stabilized fluidized bed

A magnetically stabilized fluidized bed （MSFB,Ф 500mm×2100mm） was designed to study dust removal from flue gas. Based on the mechanism of dust removal in a fixed bed, the effects on collection efficiency of magnetic field intensity, ratio of flue gas velocity to minimum fluidization velocity, bed height, and particle average diameter, were investigated. Then feasible methods for MSFB to better remove dust were proposed. Over 95 % of dust removal with MSFB can be achieved, when stable fluidization is maintained and when magnetic particles are frequently renewed.

Numerical simulation and experimental study of gas cyclone–liquid jet separator for fine particle separation

To address the shortcomings of existing particulate matter trapping technology,especially the low separation efficiency of fine particles,herein,a novel gas cyclone-liquid jet separator was developed to research fine particle trapping.First,numerical simulation methods were used to investigate the flow field characteristics and dust removal efficiency of the separator under different working conditions,and to determined suitable experimental conditions for subsequent dust removal experiments.Afterward,the separation efficiency of the separator against five kinds of common particles,including g-C_(3)N_(4),TiO_(2),SiC,talc,and SiO_(2),was experimentally studied.A maximum separation efficiency of 99.48%was achieved for particles larger than 13.1μm,and 96.55%efficiency was achieved for particles larger than 2μm.The best crushing atomization effect was achieved for the separator when uGwas 10 m·s^(-1)and uLwas 3 m·s^(-1),while the best separation effect was achieved when uGwas 10 m·s^(-1)and uLwas 3.75 m·s^(-1).Studies have shown that the gas cyclone-liquid jet separator has excellent applicability in the separation of fine particles.

An air cleaner for road tunnels

an air cleaner employing pulse induced plasma chemical process to remove dust and carbon monoxide (CO) in road tunnels is presented, which is composed of mainly a precipitator, a reactor, a flow control system, a power supply and a measurement system. Its performances are studied in simulated air conditions. It is found that the rate of dust removal is dependent on the voltage of the pulse power, the distance between the two dust collecting plates of the electrostatic precipitator, the effective length of the precipitator and the air flow rate in the precipitator, and that of CO removal is affected by the voltage and frequency of the super pulse power, the air flow rate in the reactor and the relative humidity of air. Applying such an cleaner of a proper design to the treatment of polluted air at a flow rate of 7 m/s can achieve the rate of dust removal up to 93 % and that of CO removal up to 72.6 %, which efficiently controls the concentrations of CO and dust under allowable limits. It is implied that the proposed air cleaner is a potential solution to air control in road tunnels, and is prominent for its performances and saving the huge cost of longitudinal ventilation tunnel or vertical vent and ventilation facilities.