Effect of optimized aging processing on properties of the sintered Dy-doped Nd–Fe–B permanent magnet

We investigate the effect of the optimized aging processing on magnetism and mechanical property of the sintered Dydoped Nd–Fe–B permanent magnet. The experimental results show that the magnetism, especially intrinsic coercivity, of the optimized aged Dy-doped Nd–Fe–B magnet is more excellent than that of the sintered one, but the former＇s strength and hardness are lower than that of the latter. It was observed that the optimized aged Dy-doped Nd–Fe–B magnet have more uniform grain size, thinner（Nd, Dy）-rich boundary phase. By means of the EBSD technology, the number of larger angle grain boundaries in the optimized aged Dy-doped Nd–Fe–B magnet is more than that of the sintered one. The reasons for the increased intrinsic coercivity and decreased mechanical properties of the optimized aged Dy-doped Nd–Fe–B magnet are also discussed.

Hydrothermal synthesis and characterization of Dy-doped CeVO_(4) nanorods used for photodegradation of methylene blue and rhodamine B

Pure CeVO_(4) and Dy-doped CeVO_(4) nanorods containing different weight contents of Dy dopant were synthesized by hydrothermal method.Effect of Dy dopant on photodegradation of methylene blue(MB)and rhodamine B(RhB) was evaluated under UV light irradiation within 80 min.Pure CeVO_(4) and Dydoped CeVO_(4) nanorods were characterized by X-ray diffraction(XRD),Raman spectroscopy,transmission electron microscopy(TEM) and UV-visible spectroscopy.In this research,CeVO_(4) nanorods are tetragonal phase with the detection of main peak shift after being doped with Dy.The length of nanorods is deceased from 50 to 200 nm for pure CeVO_(4) to 50-100 nm for 3% Dy-doped CeVO_(4).Photodegradation of MB and RhB by CeVO_(4) nanorods under UV light irradiation is improved by Dy-dopant that plays the role in accepting electrons and reducing electron-hole recombination.MB and RhB solutions degraded by 3% Dy-doped CeVO_(4) nanorods was 94% and 93% within 80 min,respectively.

Brittleness and fracture mechanism of sintered Dy-doped NdFeB magnets

The brittleness and fracture behaviors of the sintered and the two-stage aged Dy-doped NdFeB magnets were studied by a unique method of acoustic emission testing and Vickers hardness indentation method in this paper.A detailed analysis on the crack propagation mechanism along the grain boundary of the main grain phase(Nd,Dy)_(2)Fe_(14)B was done.By comparing the acoustic emission energy count value(E_(n))with the Vickers hardness indentation load(P),it is shown that there is a linear relationship between En and P for both the sintered and the two-stage aged Dy-doped NdFeB magnets.According to the slope of En versus P linear lines,it can be found that the two-stage aged Dy-doped NdFeB magnet is more brittle than the sintered one.It is due to that the Ndrich grain boundary phase of the two-stage aged Dy-doped NdFeB magnet is formed as thin film and uniformly distributes around the main grain phase,which plays a significant role in increasing the intrinsic coercive force of the magnet,but decreasing its interface binding strength.Therefore,the resistance of crack propagation along the grain boundary decreases and the brittleness increases.

Synthesis, Electrical and Magnetic Properties of Fe304 Doped by Dy^3＋

The Dy^3＋ -doped Fe3O4 samples were synthesized by sol-gel method, and the effects of dopant on the electrical and magnetic properties were investigated. According to XRD analysis, the high concentration doping of dysprosium ions in Fe3O4 can not be obtained due to the difference of ionic radius, and Fe^3 ＋ ions are replaced by only a small amount of dysprosium ions. The magnetic property was characterized by VSM. The substitution results in the change of saturation magnetization, which may be due to the complex effects of increasing magnetization resulted from Dy^3＋ substitution and decreasing magnetization resulted from the impurity. The electrical property was characterized by four-probe method. With the increasing eoped content, magnetoresistance also increases, then decreases, and increases again. The spin-polarization of doped samples is lower than that of Fe3O4. Lower spin-polarization results in lower tunneling magnetoresistance. Fortunately, barrier was obtained by the second phase at the same time when sample was synthesized. The increase of appropriate barrier height leads to the change of tunneling magnetoresistance.

Facile synthesis of graphene anchored rare earth doped mixed metal ferrite nanorods:A potential candidate for azo dye mineralization

Bandgap tuning using rare earth metals as dopants in ferrite-based photocatalytic materials has received a lot of interest because the Fermi 4f energy of these metals generates a sub-energy state in the bandgap generated by the overlapping of Fe-3d and O-2p orbitals.Herein,dysprosium-doped cobalt-nickel mixed ferrite(D-CNFO)and its graphene-reinforced composite(D-CNFO@G)were prepared and an ideal photocatalyst material for azo dye mineralization was proposed.A cost-effective combination of wetchemical and ultrasonication methods was used to prepare the doped and composite samples.Advanced characterization methodologies were used to scrutinize the optical,compositional,structural,morphological,and photocatalytic characteristics of as-prepared materials.The X-ray diffraction analysis identified the spinel phase's(cubic)structure,while the electronic spectroscopy examination confirmed the prepared samples'rod-like morphology.The UV/visible absorbance spectrum shows the higher light harvesting behavior of the D-CNFO@G in the visible region.The mineralization performance of the DCNFO and D-CNFO@G composites was analyzed using Congo-red(an anionic dye),a well-known azo dye.The D-CNFO@G sample removes Congo-red dye at a rate almost 2.4%faster than the D-CNFO sample.The experiment involving trapping free radicals indicates that hydroxyl radical play s a crucial role in dye degradation.Since the D-CNFO@G catalyst is magnetic and can be isolated easily from the photocatalytic system,it shows an awkward cycle activity of more than 96%after five mineralization tests.The asprepared D-CNFO@G composite is proved as an excellent option for azo dye mineralization because of the combined impacts of rare earth doping,graphene reinforcement and nanotechnology.

Microwave electromagnetic and absorbing properties of Dy^(3+) doped MnZn ferrites

Dy3+ doped Mn-Zn ferrites Mn0.3Zn0.7Fe2-xDyxO4(x=0,0.01,0.02,0.03,0.04)were prepared by the conventional solid-state reaction.The crystal structure,surface morphology and electromagnetic properties of the calcined samples were characterized by X-ray diffraction analysis(XRD),scanning electron microscopy(SEM) and network analyzer(Agilent 8722ET).All the XRD patterns showed the single phase of the spinel-type ferrite without other intermediate when x≤0.03.The average crystallite size was about 44?56 nm.The mi...