Seventeen disperse dyes including anthraquinone, azo, methine, nitro, and quinoline dyes were applied to dye the Polylactic Acid （PLA） yarns at different conditions, and the dyebath exhaustion was determined. The re...Seventeen disperse dyes including anthraquinone, azo, methine, nitro, and quinoline dyes were applied to dye the Polylactic Acid （PLA） yarns at different conditions, and the dyebath exhaustion was determined. The result shows that C.I. disperse red 167, C.I. disperse orange 30, and C.I. disperse blue 284 have dye-uptakes greater than 80%. Therefore, they can be used as the three principal dyes for PLA yams. The experiment discovered that the dyes, because of their Monoazo and ester group contents, have a higher dye-uptake for the PLA fiber. The research on the optimization of dyeing techniques suggests that PLA yarn can obtain a high level of dyeing effectiveness at the following conditions： pH 4- 5, dyeing temperture 110℃ for 30- 40 min. Color fastness to perspiration, and waterwashing fastness increased 1 - 1.5 by the addition of the abstergent FB during the reduction clearing.展开更多
The study of dyeability of the modified flax that uses dye-uptake to reflect its modifying effect is reported in this paper. The optimal technological condition is that the concentration of the modifying agent is 4 g/...The study of dyeability of the modified flax that uses dye-uptake to reflect its modifying effect is reported in this paper. The optimal technological condition is that the concentration of the modifying agent is 4 g/l, and NaOH is 6 g/l at liquor ratio of 1∶30 for 60 min. at 85℃.Dyeability include uptake rate and color fastness. Dye-uptake of the modified flax is twice more than that of the unmodified. And their color fastness doesnt fall and some of them raise 0.51 level.展开更多
Applying conventional analytical methods,the following results have been found:the satura-tion value of acid--modified multifunction copolyest fibre( acid-modified polyester fibre)is1.74,then this kind of fibre is goo...Applying conventional analytical methods,the following results have been found:the satura-tion value of acid--modified multifunction copolyest fibre( acid-modified polyester fibre)is1.74,then this kind of fibre is good for being dyed medium and light colours with cationicdyes;its level of erystalization is lower than of PET fibre;the third monomer(SIPM)con-tent in the fibre will be reduced by about 8% by the "alkali treatment"in dyeing and finishingprocess:through measuring and analysing the dye-up-take curves of time and temperature ofdyeing the fibre with cationic dyes,we indicate the key factors in dyeing are the 100℃ dyeingtemperature and the time for heat preservation;moveover,adding sodium sulphate will help leveldyeing but lower the dye-uptake.展开更多
基金Supported by the General Administration of Quality Supervision,Inspection and Quarantine of P. R.C,(No.2005IK099)
文摘Seventeen disperse dyes including anthraquinone, azo, methine, nitro, and quinoline dyes were applied to dye the Polylactic Acid （PLA） yarns at different conditions, and the dyebath exhaustion was determined. The result shows that C.I. disperse red 167, C.I. disperse orange 30, and C.I. disperse blue 284 have dye-uptakes greater than 80%. Therefore, they can be used as the three principal dyes for PLA yams. The experiment discovered that the dyes, because of their Monoazo and ester group contents, have a higher dye-uptake for the PLA fiber. The research on the optimization of dyeing techniques suggests that PLA yarn can obtain a high level of dyeing effectiveness at the following conditions： pH 4- 5, dyeing temperture 110℃ for 30- 40 min. Color fastness to perspiration, and waterwashing fastness increased 1 - 1.5 by the addition of the abstergent FB during the reduction clearing.
文摘The study of dyeability of the modified flax that uses dye-uptake to reflect its modifying effect is reported in this paper. The optimal technological condition is that the concentration of the modifying agent is 4 g/l, and NaOH is 6 g/l at liquor ratio of 1∶30 for 60 min. at 85℃.Dyeability include uptake rate and color fastness. Dye-uptake of the modified flax is twice more than that of the unmodified. And their color fastness doesnt fall and some of them raise 0.51 level.
文摘Applying conventional analytical methods,the following results have been found:the satura-tion value of acid--modified multifunction copolyest fibre( acid-modified polyester fibre)is1.74,then this kind of fibre is good for being dyed medium and light colours with cationicdyes;its level of erystalization is lower than of PET fibre;the third monomer(SIPM)con-tent in the fibre will be reduced by about 8% by the "alkali treatment"in dyeing and finishingprocess:through measuring and analysing the dye-up-take curves of time and temperature ofdyeing the fibre with cationic dyes,we indicate the key factors in dyeing are the 100℃ dyeingtemperature and the time for heat preservation;moveover,adding sodium sulphate will help leveldyeing but lower the dye-uptake.
