The FePC-based bulk metallic glasses（BMGs）have been demonstrated to possess high plasticity and good soft magnetic properties.However,the relatively poor glass forming ability（GFA）and thermal stabilities limited t...The FePC-based bulk metallic glasses（BMGs）have been demonstrated to possess high plasticity and good soft magnetic properties.However,the relatively poor glass forming ability（GFA）and thermal stabilities limited their application in industries.The effects of microalloying with B in FePC-based BMGs on the GFA and thermal behaviors were systematically investigated.It was found that a small amount of B addition can dramatically enhance the GFA of FePC-based BMGs,which in turn leads to the critical maximum diameter up to 2 mm for full glass formation even using low cost raw materials.The underlying mechanism of the enhancement of GFA from the competing crystalline phase with amorphous phase,the average thermal expansion coefficient and dynamic viscosity were discussed in detail.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51301142and 51671162)China Postdoctoral Science Foundation(Nos.2015T80957and 2014M562279)+1 种基金Chongqing Research Program of Basic Research and Frontier Technology(No.cstc2015jcyjBX0107)the Fundamental Research Funds for the Central Universities(Nos.XDJK2015C064and XDJK2015C003)
文摘The FePC-based bulk metallic glasses（BMGs）have been demonstrated to possess high plasticity and good soft magnetic properties.However,the relatively poor glass forming ability（GFA）and thermal stabilities limited their application in industries.The effects of microalloying with B in FePC-based BMGs on the GFA and thermal behaviors were systematically investigated.It was found that a small amount of B addition can dramatically enhance the GFA of FePC-based BMGs,which in turn leads to the critical maximum diameter up to 2 mm for full glass formation even using low cost raw materials.The underlying mechanism of the enhancement of GFA from the competing crystalline phase with amorphous phase,the average thermal expansion coefficient and dynamic viscosity were discussed in detail.
