Impact of ethanol on the flotation efficiency of imidazolium ionic liquids as collectors:Insights from dynamic surface tension and solvation analysis

To conduct extensive research on the application of ionic liquids as collectors in mineral flotation,ethanol(EtOH)was used as a solvent to dissolve hydrophobic ionic liquids(ILs)to simplify the reagent regime.Interesting phenomena were observed in which EtOH exerted different effects on the flotation efficiency of two ILs with similar structures.When EtOH was used to dissolve 1-dodecyl-3-methylimidazolium chloride(C12[mim]Cl)and as a collector for pure quartz flotation tests at a concentration of 1×10^(−5)mol·L^(−1),quartz recovery increased from 23.77%to 77.91%compared with ILs dissolved in water.However,quartz recovery of 1-dodecyl-3-methylim-idazolium hexafluorophosphate(C12[mim]PF6)decreased from 60.45%to 24.52%under the same conditions.The conditional experi-ments under 1×10^(−5)mol·L^(−1)ILs for EtOH concentration and under 2vol%EtOH for ILs concentration confirmed this difference.After being affected by EtOH,the mixed ore flotation tests of quartz and hematite showed a decrease in the hematite concentrate grade and re-covery for the C12[mim]Cl collector,whereas the hematite concentrate grade and recovery for the C12[mim]PF6 collector increased.On the basis of these differences and observations of flotation foam,two-phase bubble observation tests were carried out.The EtOH promoted the foam height of two ILs during aeration.It accelerated static froth defoaming after aeration stopped,and the foam of C12[mim]PF6 de-foaming especially quickly.In the discussion of flotation tests and foam observation,an attempt was made to explain the reasons and mechanisms behind the diverse phenomena using the dynamic surface tension effect and solvation effect results from EtOH.The solva-tion effect was verified through Fourier transform infrared(FT-IR),X-ray photoelectron spectroscopy(XPS),and Zeta potential tests.Al-though EtOH affects the adsorption of ILs on the ore surface during flotation negatively,it holds an positive value of inhibiting foam mer-ging during flotation aeration and accelerating the defoaming of static foam.And induce more robust secondary enrichment in the mixed ore flotation of the C12[mim]PF6 collector,facilitating effective mixed ore separation even under inhibitor-free conditions.

Studies on sensitivity to tension and gating pathway of MscL by molecular dynamic simulation

Mechanosensitive（MS） ion channels play an important role in various physiological processes.Although the determination of the structure of mechanosensitive channel of large conductance（MscL） makes the simulation study possible,it has not so far been possible to directly simulate the gating mechanism of MscL in atomic detail.In this article,MscL has been studied via molecular dynamic（MD） simulations to gain a detailed description of the sensitivity to lateral tension and the gating pathway.MscL undergoes conformational rearrangement in sustaining lateral tension,and the open state is obtained when 2.0 MPa lateral tension is directly applied on the pure protein.During the opening process,Loop region responds to tension first,and the mechanical sensitivity is followed by S1 domain.Transmembrane（TM） bundle is the key position for channel opening,and the motion of TM1 helices finally realizes the significant expansion of the constricted gating pore.C-terminus domain presents expansion later during the TM opening.In our study,return of the whole protein to the initial closed state is achieved only in the early opening stage.During the relaxation from the open state,the TM helices are the most mobile domain,which is different from the opening process.

Influence of Maximum Aggregate Size on Dynamic Size Effect of Concrete Under Low Strain Rates:Meso-scale Simulations

This study is to explore the influence of maximum aggregate size(MAS)on the failure and corresponding size effect of concrete materials under low strain rates.The failure process of concrete was simulated by the mesoscale numerical method considering the internal heterogeneity of concrete and strain rate effect.Based on the mesoscale method,the failure behavior of concrete specimens with different structural sizes and MAS was investigated.Also,the influence of MAS on the failure modes,nominal strength and corresponding size effect of concrete were studied at the meso-scale.The simulation results indicated that MAS has an obvious influence on the failure modes of concrete subjected to axial compressive and tensile loads.The nominal tensile strength increased as the MAS increased,while the nominal compressive strength increased first and then decreased as the MAS increases under quasi-static load.In addition,it was found that the size effect on nominal strength of concrete would be weakened with the increase of strain rate.When the applied strain rate reached 1 s^-1,the size effect on nominal strength of concrete disappeard.Moreover,the MAS has an ignorable influence on the dynamic size effect of concrete under uniaxial compression and tension.

Velocity of a Liquid Drop with a Sorption-Controlled Surfactant

The terminal velocity of a liquid droplet settling in a sulfactant solution has been studied for the non-linear adsorption Langmuir frameworks accounting for monolayer saturation and non-ideal surfactant interactions. Most prior research uses a linear adsorption model which cannot capture these effects, The Maragoni migration of a liquid drop settling through a surfactant solution is examined by using Langmuir framework. The solution concentration Ceq is assumed large enough for the surfactant mass transfer to be adsorption-controlled. Langmuir model generates non-linear Marangoni stresses which diverge in the limit of approaching ∝, strongly retarding U'.

Diffusion-controlled Adsorption Kinetics of Surfactant at Air/Solution Interface

For the diffusion-controlled adsorption, the expression of dynamic surface adsorption P（t） was ob- tained by solving the diffusion equation. Two cases, i.e. the short and long time limits, were mainly discussed in this paper. From the measured dynamic surface tension of aqueous surfactant sodium dodecyl sulfate （SDS） solutions at 25 ℃, the adsorption kinetics of SDS at air/solution interface was studied. It was proved that for both of the short and long time limits, the adsorption process of SDS was controlled by diffusion.

Adsorption Kinetics of Alkyl Polyglucoside at the Air-Solution Interface

The air-solution equilibrium tension ge and dynamic surface tension gt, of nonionic surfactant alkyl polyglucoside have been studied. ge was measured by the Wilhelmy method with Krüss K12 tensiometer. The CMC and the surface excesses Γwere determined from the surface tension vs. concentration curve. The gt decays were measured in the range 0.2～20 s using a maximum bubble pressure instrument and analyzed with the Ward and Tordai equation.

Diffusion-controlled Adsorption Kinetics at Air/Solution Surface Studied by Maximum Bubble Pressure Method

In studying the diffusion-controlled adsorption kinetics of aqueous surfactant solutions at the air/solution surface by means of the maximal bubble pressure method, Fick's diffusion equation for a sphere should be used. In this paper the equation was solved by means of Laplace transformation under different initial and boundary conditions. The dynamic surface adsorption F(t) for a surfactant solution, which was used to describe the diffusion-controlled adsorption kinetics at the solution surface, was derived. Different from the planar surface adsorption, the dynamic surface adsorption F(t) for the short time consists of two terms: one is the same as Ward-Tordai equation and the other reflects the geometric effect caused by the spherical bubble surface. This effect should not be neglected for the very small radius of the capillary. The equilibrium surface tension γeq and the dynamic surface tension γ(t) of aqueous C10E6 [CH3(CH2)9(OCH2CH2)6OH] solution at temperature 25℃ were measuredby means of Wilhelmy plate method and maximal bubble pressure method respectively. As t→ 0, the theoreticalanalysis is in good agreement with experimental results and the dependence of γ(t) on is linear.

Effect of Sodium Halide on Dynamic Surface Tension of a Cationic Surfactant

The equilibrium and dynamic surface tension （DST） of the novel cationic surfactant, 3-（p-nonylphenoxy）-2-hydroxylpropyl trimethyl ammonium bromide, abbreviated as RTAB, were studied. The effect of sodium halide such as NaCl, NaBr and NaI on the DST behavior of the RTAB solution below its CMC was studied in detail. Due to the preferential adsorption, the effect of hydration and salting out, the ability to reduce the DST values at the same concentration was in the order of NaI〉NaBr〉NaCl. Attributed to its high surface activity, the equilibrium time of the DST of the surfactant solution was insensitive to the ionic strength.

Study on the Surface Property of Surfactant Ionic Liquids Solutions

The surfactant TX-100 can be dissolved in ionic liquid bmimPF6 and decrease the surface tension of 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6) solutions. Here, we confirmed that in this new system, the pure solvents need rearrangement at the air-water interface at the initial stage. The dynamic surface tension (DST) study shows that at the initial adsorption stage, the adsorption model of surfactant accords with the diffusion-controlled adsorption mechanism, and the dilute ionic liquids solutions is further close to the diffusion-controlled adsorption.

Diffusion-Controlled Adsorption Kinetics of Triton X-100 at Air/Solution Interface

In this paper, the equilibrium surface tension and the dynamic surface tension of aqueous Triton X-100 solution at temperature 25 ℃ were measured by means of Wilhelmy plate method and maximal bubble pressure method respectively. The determined critical micellar concentration（cmc） of Triton X-100 at 25 ℃ is (2.2×10-4) mol/dm3. The adsorption mechanics of Triton X-100 at air/solution was determined. For the submicellar concentrations it is diffusion-controlled. The diffusion coefficient was calculated from the experimental data in the range of short limit. In the range of long time adsorption, the subsurface concentration is fitted from the measured dynamic surface tensions.

Dynamic Tensile Property of Zr-based Metallic Glass/Porous W Phase Composite

The dynamic tensile deformation and fracture behavior of the Zr-based metallic glass/porous W phase composite were investigated at room temperature by means of the Split Hopkinson Tension Bar （SHTB）.It was found that the composite exhibited no appreciable macroscopic plastic deformation prior to catastrophic fracture and the fracture surface was perpendicular to the axial direction.Substantive micro cracks were observed along the interface between W grains or the interface between the metallic glass phase and the W phase.Scanning electron microscopy （SEM） observations revealed that vein-like patterns,dimple-like patterns and substantive ridge-like structures were the typical fracture morphologies on the fracture surface for the metallic glass phase and the morphology of the W phase is a mixture of intergranular and transgranular fracture.Based on those results referred above,the dynamic tensile deformation and fracture mechanism of the Zr-based metallic glass/porous W phase composite were discussed in detail.

Study on the Mechanism of Asphaltenes Reducing Oil-Water Interfacial Tension

As high polar components of crude oil, asphaltenes play a significant role in reducing oil-water interfacial tension(IFT). In this paper, the effects of asphaltenes on reducing IFT in the presence of surfactant were compared, and the mechanism of asphaltenes reducing the IFT was studied by the dynamic interfacial tension(DIFT) equation. Whether asphaltenes were added to the oil or 2,5-dimethyl-4-(4-dodecyl) benzene sodium sulfonate(p-S14-4) was added to the water phase, either of all results in the IFT reducing and the IFT is related to the coverage and the mass of asphaltenes adsorption at the interface. In the presence of asphaltenes, the adsorption of the active substances to the interface is not entirely dependent on diffusion, and the process can be divided into three regions. Region I: the IFT rapidly reducing, this process is controlled by diffusion of surfactant;Region II: the IFT reducing slowly, resulted from the lower diffusion rate that is limited due to the aggregates formed by the interaction of asphaltene-asphaltene;Region III: the interaction of asphaltene-asphaltene is broken by the interaction of surfactant-asphaltene. The asphaltene aggregates are reduced and adsorbed rapidly at the interface. Furthermore, the results reveal that the asphaltenes concentration affects the coverage rate and adsorption at the interface.