An In-Depth Study of Complex Power System Dynamic Behavior Characteristics for Chinese UHV Power Grid Security

In this paper,a series of major policy decisions used to improve the power grid reliability,reduce the risk and losses of major power outages,and realize the modernization of 21st century power grid are discussed. These decisions were adopted by American government and would also be helpful for the strategic development of Chinese power grid. It is proposed that China should take precaution,carry out security research on the overall dynamic behaviour characteristics of the UHV grid using the complexity theory,and finally provide safeguard for the Chinese UHV grid. It is also pointed out that,due to the lack of matured approaches to controll a cascading failure,the primary duty of a system operator is to work as a "watchdog" for the grid operation security,eliminate the cumulative effect and reduce the risk and losses of major cascading outages with the help of EMS and WAMS.

Numerical and experimental investigation into the evolution of the shock wave when a muzzle jet impacts a constrained moving body

The gun-track launch system is a new special launch device that connects the track outside the muzzle.Because it is constrained by the track,the characteristics of development of the muzzle jet differ from those of the traditional muzzle jet.Specifically,it changes from freely developing to doing so in a constrained manner,where this results in an asymmetric direction of flow as well as spatio-temporal coupling-induced interference between various shock waves and the formation of vortices.In this background,the authors of this article formulate and consider the development and characteristics of evolution of the muzzle jet as it impacts a constrained moving body.We designed simulations to test the gun-track launch system,and established a numerical model based on the dynamic grid method to explore the development and characteristics of propagation of disturbances when the muzzle jet impacted a constrained moving body.We also considered models without a constrained track for the sake of comparison.The results showed that the muzzle jet assumed a circumferential asymmetric shape,and tended to develop in the area above the muzzle.Because the test platform was close to the ground,the muzzle jet was subjected to reflections from it that enhanced the development and evolution of various forms of shock waves and vortices in the muzzle jet to exacerbate its rate of distortion and asymmetric characteristics.This in turn led to significant differences in the changes in pressure at symmetric points that would otherwise have been identical.The results of a comparative analysis showed that the constrained track could hinder the influence of reflections from the ground on the muzzle jet to some extent,and could reduce the velocity of the shock waves inducing the motion of the muzzle as well as the Mach number of the moving body.The work here provides a theoretical basis and the requisite technical support for applications of the gun-track launch system.It also sheds light on the technical bottlenecks that need to be considered to recover high-value warheads.

A fast and reliable overset unstructured grids approach

A cell-centred overset unstructured grids approach is developed.In this approach,the intergrid boundary is initially established based on the wall distance from the cell centre,and is then optimized.To accelerate the intergrid-boundary definition much more,a neighbor-toneighbor donor search algorithm based on advancing-front method is modified with the help of minimum cuboid boxes.To simplify the communications between different grid cell types and to obtain second-order spatial accuracy,a new interpolation method is constructed based on linear reconstruction,which employs only one layer of fringe cells along the intergrid boundary.For unsteady flows with relative motion,the intergrid boundary can be redefined fast and automatically.Several numerical results show that the present dynamic overset unstructured grids approach is accurate and reliable.

A comprehensive fluid-solid coupling dynamic simulation for spatiotemporal distribution of regression rate in hybrid rocket motors

The spatiotemporal distribution characteristics of the regression rate are crucial aspects of the research on Hybrid Rocket Motor(HRM).This study presents a pioneering effort in achiev-ing a comprehensive numerical simulation of fluid dynamics and heat transfer in both the fluid and solid regions throughout the entire operation of an HRM.To accomplish this,a dynamic grid tech-nique that incorporates fluid-solid coupling is utilized.To validate the precision of the numerical simulations,a firing test is conducted,with embedded thermocouple probes being used to measure the inner temperature of the fuel grain.The temperature variations in the solid fuel obtained from both experiment and simulations show good agreement.The maximum combustion temperature and average thrust obtained from the simulations are found to deviate from the experimental results by only 3.3%and 2.4%,respectively.Thus,it can be demonstrated that transient numerical simu-lations accurately capture the fluid-solid coupling characteristics and transient regression rate.The dynamic simulation results of inner flow field and solid region throughout the entire working stage reveal that the presence of vortices enhances the blending of combustion gases and improves the regression rate at both the front and rear ends of the fuel grain.In addition,oscillations of the regression rate obtained in the simulation can also be well corresponded with the corrugated surface observed in the experiment.Furthermore,the zero-dimension regression rate formula and the for-mula describing the axial location dependence of the regression rate are fitted from the simulation results,with the corresponding coefficients of determination(R°)of 0.9765 and 0.9298,respectively.This research serves as a reference for predicting the performance of HRM with gas oxygen and polyethylene,and presents a credible way for investigating the spatiotemporal distribution of the regression rate.

Concurrent multi-task pre-processing method for LEO mega-constellation based on dynamic spatio-temporal grids

The Low Earth Orbit(LEO)remote sensing satellite mega-constellation has the characteristics of large quantity and various types which make it have unique superiority in the realization of concurrent multiple tasks.However,the complexity of resource allocation is increased because of the large number of tasks and satellites.Therefore,the primary problem of implementing concurrent multiple tasks via LEO mega-constellation is to pre-process tasks and observation re-sources.To address the challenge,we propose a pre-processing algorithm for the mega-constellation based on highly Dynamic Spatio-Temporal Grids(DSTG).In the first stage,this paper describes the management model of mega-constellation and the multiple tasks.Then,the coding method of DSTG is proposed,based on which the description of complex mega-constellation observation resources is realized.In the third part,the DSTG algorithm is used to realize the processing of concurrent multiple tasks at multiple levels,such as task space attribute,time attribute and grid task importance evaluation.Finally,the simulation result of the proposed method in the case of constellation has been given to verify the effectiveness of concurrent multi-task pre-processing based on DSTG.The autonomous processing process of task decomposition and task fusion and mapping to grids,and the convenient indexing process of time window are verified.

Three-dimensional transient numerical simulation for intake process in the engine intake port-valve-cylinder system

This paper presents a KIVA-3 code based numerical model for three-dimensional transient intake flow in the intake port-valve-cylinder system of internal combustion engine using body-fitted technique, which can be used in numerical study on internal combustion engine with vertical and inclined valves, and has higher calculation precision. A numerical simulation (on the intake process of a two-valve engine with a semi-sphere combustion chamber and a radial intake port) is provided for analysis of the velocity field and pressure field of different plane at different crank angles. The results revealed the formation of the tumble motion, the evolution of flow field parameters and the variation of tumble ratios as important information for the design of engine in-take system.

Three-dimensional transient numerical simulation for gas exchange process in a four-stroke motorcycle engine

Three-dimensional transient numerical simulation of gas exchange process in a four-stroke motorcycle engine with a semi-spherical combustion chamber with two tilt valves was studied. Combination of the grid re-meshing method and the snapper technique made the valves move smoothly. The flow structure and pattern in a complete engine cycle were described in detail. Tumble ratios around the x-axis and y-axis were analyzed. Comparison of computed pressure with experimental pressure under motored condition revealed that the simulation had high calculation precision; CFD simulation can be regarded as an im-portant tool for resolving the complex aerodynamic behavior in motorcycle engines.

Research on buffer structure and flow field simulation of swash plate plunger type hydraulic transformer

In order to solve the problem of excessive noise and vibration during the operation of the hydraulic transformer,an optimization method of valve plate damping hole structure is proposed to alleviate the phenomenon of pressure shock.Firstly,the mathematical model of oil pressure gradient in the plunger cavity is established,and the incremental equation of pressure change is derived.Secondly,a kind of buffering structure is proposed,the corresponding relationship between the pressure change and the envelopment angle of the buffering hole and the aperture size is determined by analyzing the oil pressure change curve in the plunger cavity.Finally,the flow field models with buffering holes are established,and the transient simulation of the pressure change process under the optimal solution is carried out with ANSYS software and the flow field pressure distribution contours are obtained.Through the analysis of simulation results,it is concluded that the optimal envelope angle of the three buffer holes ofA-T-B-Ais 5°,and the optimal aperture is 1.8 mm,1.6 mm,and 1.7 mm,respectively.The buffer hole can achieve a better-buffering effect in the range of variable pressure angle[0°,101°].The buffer hole structure can effectively alleviate the pressure shock and reduce the noise level,which lays a foundation for the design and theoretical research of hydraulic transformers.

Fault Ride-Through(FRT)Behavior in VSC-HVDC as Key Enabler of Transmission Systems Using SCADA Viewer Software

The world’s energy consumption and power generation demand will continue to rise.Furthermore,the bulk of the energy resources needed to satisfy the rising demand is far from the load centers.The aforementioned requires long-distance transmission systems and one way to accomplish this is to use high voltage direct current(HVDC)transmission systems.The main technical issues for HVDC transmission systems are loss of synchronism,variation of quadrature currents,amplitude,the inability of station 1(rectifier),and station 2(inverter)to either inject,or absorb active,or reactive power in the network in any circumstances(before a fault occurs,during having a fault in network and after a fault cleared),and the variations of power transfer capabilities.Additionally,faults impact power quality such as voltage dips and power line outage time.This paper presents a method of overcoming the aforementioned technical issues using voltage-source converter(VSC)based HVDC transmission systems with SCADA VIEWER software and dynamic grid simulator.The benefits include having a higher capacity transmission system and proposed best method for control of active and reactive power transfer capabilities.Simulation results obtained using MATLAB validated the experimental results from SCADA Viewer software.The results indicate that the station’s rectifier or inverter can either inject or absorb either active power or reactive power in any circumstance.Also,the reverse power flow under different modes of operation can ride through faults.At a 100.0%power transfer rate,the rectifier injected 775.0 W into the network.At a 0.0%power transfer rate,the rectifier injected 164.0 W into the network.At a-100.0%rated power,the rectifier injected 1264.0 W into the network and direction was also changed.

Smolyak Type Sparse Grid Collocation Method for Uncertainty Quantification of Nonlinear Stochastic Dynamic Equations

This paper develops a Smolyak-type sparse-grid stochastic collocation method(SGSCM) for uncertainty quantification of nonlinear stochastic dynamic equations.The solution obtained by the method is a linear combination of tensor product formulas for multivariate polynomial interpolation.By choosing the collocation point sets to coincide with cubature point sets of quadrature rules,we derive quadrature formulas to estimate the expectations of the solution.The method does not suffer from the curse of dimensionality in the sense that the computational cost does not increase exponentially with the number of input random variables.Numerical analysis of a nonlinear elastic oscillator subjected to a discretized band-limited white noise process demonstrates the computational efficiency and accuracy of the developed method.

Numerical simulation of transient characteristics in a bulb turbine during the load rejection process

To evaluate the safety of the bulb tubular turbine,the dynamic hydraulic characteristics of a hydropower station system during the load rejection process are studied through numerical simulations and a prototype test.In the developed model,a dynamic grid technology(DGT)controls the closure of the guide vane and the blade,whilst the moment balance equation and the user-defined function(UDF)provide the runner’s rotation speed.The 3-D transient simulation method can well predict the rotation speed and mass flow curves in the state of load rejection.The simulation outcomes of the system performance are basically consistent with the measurement data of the prototype.As observed,the runner is subjected to the reversely increased torque and axial force,the system is in a braking phase,and the maximum speed peaks at 144.6%of the rated speed.Moreover,the internal flow of the runner is greatly affected by the closure of the guide vane,and the draft tube forms an eccentric spiral vortex rope.It breaks downstream,aggravating the instability of the draft tube.Overall,the transient characteristics span for the first five seconds,demonstrating the importance of establishing an efficient governing controller.The obtained results are useful for designing the turbine’s flow channel with a double regulating function and comprehending the turbine’s transient characteristics.

Structure overset grid method and its applications to simulation of multi-body separation

This paper proposes an automatic structure overset grid method, which utilizes the hole-surface optimization with one-step searching, wall-surface grid oversetting, and dynamic overset grid approaches to achieve the high adaptability of overset grids for complex multi-body aircrafts. Specifically, based on the automatic structure overset grids, the method first solves the coupling of Navier-Stokes(N-S) unsteady flow equation and 6DOF motion equation, and establishes the multi-body collision model. Then, the numerical simulation of unsteady flow for complex aircrafts' multi-body separation, the simulation of multi-body separating trajectory and the separation safety analysis are accomplished. Thus, the method can properly handle practical engineering problems including the wing/drop tank separation, aircraft/mount separation, and cluster bomb projection. Experiments show that our numerical results match well with experimental results, which demonstrates the effectiveness of our methods in solving the multi-body separation problem for aircrafts with complex shapes.

Self-ignition characteristics of the high-speed ramjet kinetic energy projectile in the launch process

To research the self-ignition characteristics of high-speed ramjet kinetic energy projectile in the launch process, the self-ignition process based on the solid fuel of polyethylene was numerically simulated by using the dynamic grid technology. The effect of different muzzle velocity on the self-ignition performance, and the effect of opening the blockage at different times on the flow field stability of the combustion chamber and the flow field characteristics after the solid fuel ramjet stabilized were analyzed. The results show that the occurrence of self-ignition is not only related to the pressure, temperature in the combustion chamber, and the muzzle velocity, but also to the content of C_2H_4 and its degree of mixing with air in the combustion chamber. After the kinetic energy projectile gets out of the muzzle and before the blockage opens, there is oscillation occurring in the combustion chamber. The higher the muzzle velocity of the kinetic energy projectile, the more prone to the occurrence of the self-ignition and the negative effects can be avoided due to the pressure oscillation in the combustion chamber. The effect of opening the blockage at different times on the flow field stability after the self-ignition occurs in a period of time is weak. After the blockage opens, the solid fuel ramjet can reach a stable working condition quickly.

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muz- zle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme （AUSMPW ＋） and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail. This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the free- flight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight(NVF)simulator is presented,which integrates an unsteady flow solver on moving hybrid grids,a Rigid-Body Dynamics(RBD)solver and a module of the Flight Control System(FCS).A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing,with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces(e.g.the afterbody rudders of a missile).For the flow/kinematic coupled problems,the 6 Degree-Of-Freedom(DOF)equations are solved by an explicit or implicit method coupled with the URANS CFD solver.The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model.A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model.Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law.Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.

A novel high-order scheme for numerical simulation of wake flow over helicopter rotors in hover

Accurate prediction of tip vortices is crucial for predicting the hovering performance of a helicopter rotor.A new high-order scheme(we call it WENO-K)proposed by our research group is employed to minimize numerical dissipation and extended to numerical simulation of unsteady compressible viscous flows dominated by tip vortices over hovering rotors.WENO-K is referred to as an adaptively optimized WENO scheme with Gauss-Kriging reconstruction,and its advantage is to reduce dissipation in smooth regions of flow while preserving high-resolution around discontinuities.Here WENO-K scheme is adopted to reconstruct left and right state values within the Roe Riemann solver updating the inviscid fluxes on a structured dynamic overset grid.To minimize the accuracy loss for high-order reconstruction on artificial boundaries of overset grid,a method of multilayer fringes is proposed to carry out interpolation between background grid and blade grid.Massively parallel computing considering automatic load balance on averagely partitioned overset grid is developed to reduce the wall-clock time of an unsteady simulation.Numerical results for Caradonna-Tung(C-T)rotor in hover at the conditions of subsonic and transonic tip Mach numbers show that the thrust coefficient error for the result of WENO-K scheme is no more than 3%.Compared with WENO-JS scheme,WENO-K scheme achieves about 40%improvement on accuracy of predicting rotor thrust with only 4.1%extra computational cost.More importantly,WENO-K scheme can capture more sophisticated unsteady flow structures and resolve tip vortices to a larger wake age with an increment of about 270°compared to WENO-JS scheme.