Spatiotemporal variations of parameters of internal solitary waves in the northern South China Sea

The dynamic parameters for internal solitary waves(ISWs)derived from the extended Korteweg-de Vries(eKdV)equation play an important role in the understanding and prediction of ISWs.The spatiotemporal variations of the dynamic parameters of the ISWs in the northern South China Sea(SCS)were studied based on the reanalysis of long-term temperature and salinity datasets.The results for spectrum analysis show that there are definite geographical differences for the periodic variation of the parameters:in shallow water,all parameters vary with a wave period of one year,while in deep water wave components of the parameters at other frequencies exist.Using wavelet analysis,the wavelet power spectral densities in deep water exhibited an inter-annual variation pattern.For example,the wave component of the dispersion coefficient with a wave period of about half a year reached its power peak once every two years.Based on previous work,this inter-annual variation pattern was deduced to be caused by dynamic processes.In further work on the regulatory mechanisms,empirical orthogonal function(EOF)decomposition was performed.It was found that the modes of the dispersion coefficient have different geographical distributions,explaining the reason why the wave components in different frequencies appeared in different locations.The numerical simulation results confirm that the variations in the parameters of the ISWs derived from the eKdV equation could affect the waveforms significantly because of changes in the polarity of the ISWs.Therefore,the periodic variations of the dynamic parameters are related to the geographical location because of dynamic processes operating.

DETERMINATION OF MATERIAL PARAMETERS FOR COMPUTER SIMULATION OF SUPERPLASTIC FORMING PROCESSES

In order to analyze and simulate the complex super-plastic forming process by computer, a method of equal height bulging for determining material parameters m and K of the superplastic alloy is presented. The formulae related to the method are deduced in this paper. The accuracy of the method is available for evaluating the examples used in simulating the superplastic sheet-metal bulging processes.

An experimental study on the relationship between acoustic parameters and mechanical properties of frozen silty clay

To study the influence of temperature and water content on ultrasonic wave velocity and to establish the relationship between ultrasonic wave velocity and frozen silty clay strength, ultrasonic tests were conducted to frozen silty clay by using RSM-SY5（T） nonmetal supersonic test meter, and the tensile strength and compressive strength of silty clay were measured under various negative temperatures. Test and analysis results indicate that, ultrasonic wave velocity rapidly changes in the temperature range of-1 ℃ to -5 ℃. Ultrasonic wave velocity increased with an increase of water content until the water content reached the critical water content, while decreased with an increase of water content after the water content exceeded the critical water content. This study showed that there was strong positive correlation between the ul- trasonic wave velocity and the frozen soil strength. As ultrasonic wave velocity increased, either tensile strength or com- pressive strength increased. Based on the experimental data, the relationship between ultrasonic wave velocity and frozen silty clay strength was obtained through regression analysis. It was found that the ultrasonic test technique can be used to test frozen soils and lay the foundation for the determination of frozen soil strength.

Cranny density parameters and porosity measured by elastic wave method in quasi-isotropic cranny rock masses

According to the characteristic of elastic waves propagation in medium and the application of elastic waves method in rock mass engineering, the cranny mass with random crannies was regarded as quasi-isotropic cranny mass. In accordance with the rock rupture mechanics, principle of energy balance and Castiglano＇s theorem, the relationship of effective dynamic parameters of elasticity （E, v, G） and cranny density parameters or porosity was put forward. On this basis, through the theory of elastic waves propagation in isotropic medium, the relationship between the elastic wave velocity and cranny density parameters and porosity was set up. The theoretical research results show that, in this kind of cranny rock masses, there is nonlinear relationships between the effective dynamic parameters of elasticity and wave velocities and the cranny density parameter or porosity; and with the increase of cranny density parameter or porosity of cranny rock masses, the effective dynamic modulus and the elastic wave velocities of cranny rock masses will decrease; and at the same time, when the cranny density parameter or porosity is very small, the effective dynamic modulus of elasticity and the elastic wave velocities change with the cranny density parameter, which can explain the sensitivity of effective elastic parameters and elastic wave velocities to cranny rock masses.

Fabric and Programming of Photoautotrophic Micro-propagation System Controlled by Dynamic Parameters

According to theory of photoautotrophic micro-propagation, and principle and technology of environmental engineering, an automatic control and regulation under photoautotrophic micro-propagation by plants was designed, which can be used for planting condition optimization of photoautotrophic micro-propagation and qualified industrialized production of seedlings.

Study on dynamics of central pattern generator for a quadrupedal robot

Based on Matsuoka＇s central pattern generator （CPG） model and taking quadruped as an example, the dynamics of CPG model was investigated through the single-parameter-analysis method and the numerical simulation technique. Simulation results indicate that the CPG model exhibits complex dynamics, while each parameter has specifically definitive influence trends on the CPG output. These conclusions were applied to control a quadrupedal robot to walk in different gaits, clear obstacle, and walk up- and down-slope successfully.

Iterative Identification of Robot Dynamic Parameters Based on Logistic Function

The dynamic parameter identification of the robot is the basis for the design of the controller based on the dynamic model.Currently,the primary method for solving angular velocity and angular acceleration is to filter and smooth the position sequence and then form a differential signal.However,if the noise and the original signal overlap in the frequency domain,filtering the noise will also filter out the valuable information in the frequency band.This paper proposes an excitation trajectory based on Logistic function,which fully uses the information in the original signal and can accurately solve the angular velocity and angular acceleration without filtering and smoothing the position sequence.The joint angle of the excitation trajectory is mapped to the joint angular velocity and angular acceleration one by one so that the joint angular velocity and joint angular acceleration can be obtained directly according to the position.The genetic algorithm is used to optimize the excitation trajectory parameters to minimize the observation matrix’s condition number and further improve the identification accuracy.By using the strategy of iterative identification,the dynamic parameters identified in each iteration are substituted into the robot controller according to the previous position sequence until the tracking trajectory approaches the desired trajectory,and the actual joint angular velocity and angular acceleration converge to the expected value.The simulation results show that using the step-by-step strategy,the joint angular velocity and joint angular acceleration of the tracking trajectory quickly converge to the expected value,and the identification error of inertia parameters is less than 0.01 in three iterations.With the increase of the number of iterations,the identification error of inertial parameters can be further reduced.

Ignition Dynamic Parameters for Coke in Cement Calciners

The mathematical ignition model was established and researches ofignition dynamic parameters for coke in some typical coal samplesfrom cement plants was carried out according to circumstances of coalcom- busted in cement plants. In order to get the ignitionintemperature T_pi of carbon particles more accurately, the tem-perature rising experimental method was used and the actual heatingcircumstances for pulverized coal in calciners (in cement plants)werealso considered.

A genetic algorithm for dynamic parameters reverse deduction of integrated anchorage system

In the analysis of the system of anchoring bar and wall rock in small strain and longitudinal vibration dynamic response, the influence of the cement grouting as well as the rock layer on the anchor bar can be evaluated as the two kinds of parameters: the dynamic stiffness and the damp, which are the vital reference of the anchorage quality. Based on the analytic solution to the dynamic equation of the integrated anchor bar, the new approach which combines genetic algorithm and the toolbox of Matlab is applied to solve the problem of multi-parameters reverse deduction for integrated anchorage system in dynamic testing. Using the traits of the self-organizing, self-adapting and the fast convergence speed of the genetic algorithm, the optimum of all possible solutions to dynamic parameters is obtained by calculating the project instances. Examples show that the method presented in this paper is effective and reliable.

The quantitative check-measure of the bend strain parameters of the rotating components

Based on the principle of the electric-magnetic check-measure, this paper puts forward a new technology and method that use the magnetic marks to check and measure the dynamic physical parameters such as angle speed, bending strain,stress and bending moment. The principles of the check-measure and the dealing and exchanging technology about signals have been demonstrated and the rotating components have been made up. The timely and quantitative check-measure of the dynamic physical parameters during the component in working has been realized by using computer control.

Research on Dynamic Parameters of Soil Site in the Tianjin Coastal Area

The Tianjin coastal area is a typical soft soil region,where the soil is a marine deposit of the late Quaternary.The soil dynamic parameters from seismic risk assessment reports are collected,and drilling of 15 holes was carried out to sample the soils and measure their dynamic characteristics.The data was divided into 7 types based on lithology,namely,muddy clay,muddy silty clay,silt,silty clay,clay,silty sand and fine sand.Statistics of the dynamic parameters of these soils are collected to obtain the mean values of dynamic shear modulus ratio and damping ratio at different depths.Then,two typical drill holes are selected to establish the soil dynamic models to investigate the seismic response in different cases.The dynamic seismic responses of soil are calculated using the statistical values of this paper,and the values of Code(1994) and those recommended by Yuan Xiaoming et al.(2000),respectively.The applicability and pertinence of the statistical value obtained in this paper are demonstrated by the response spectrum shape,peak ground acceleration and response spectral characteristics.The results can be taken as a reference of the soil dynamic value in this area and can be used in the seismic risk assessment of engineering projects.

Statistical Analysis of the Dynamic Parameters of Silty Clay in the Beijing Area

Soil dynamic parameters,including dynamic shear modulus ratio and damping ratio,have important effects on the results of layered soil earthquake response. In this paper,the mean parameter values of silty clay in different depths are obtained after statistical analysis of the experimental soil dynamic data from 20 recent site seismic safety evaluation reports in the Beijing area. Furthermore,based on two typical engineering sites,the influence of four different soil dynamic parameters,the statistic mean values,experimental values, values recommended by Yuan Xiaoming,and the values recommended in the code for seismic safety evaluation of engineering sites( DB001-94) are analyzed. The result shows that mean statistical values are applicable to seismic safety evaluation work in the Beijing area,especially for some inter-layered silty clays whose undisturbed soil samples are hard to obtain.

THE SOLVABILITY OF THE INITIAL-BOUNDARY PROBLEM FOR EQUATIONS IN COMBUSTION DYNAMICS WITH LARGY PARAMETER

In this paper, we study the initial-boundary value problem with rigid wall for the equations in combustion dynamics with largy parameter. Introducing variable scalar norms and two seminorms, making use of the vorticity operator, overcome the difficulty from the large parameter. By energy estimation, the existence and unique theorems of local smooth solution is proved.

Research on Dynamic Parameters of Soil Sites in the Dalian Area

In this paper, dynamic soil parameters derived from Dalian area seismic risk assessment reports are collected. In this study, the measurement data is divided into 7 types, i.e. silty clay, muddy silty clay, clay, medium sand, rock fragments, backfill soil and fully-weathered slate. Statistics of the dynamic parameters of these soils are carried out to obtain the mean values of dynamic shear modulus ratio and damping ratio. Typical drill holes are selected to establish dynamic soil models to investigate the seismic response for various cases. The dynamic parameters of the models are taken from the statistical values of this study, the standard values of code 94 (i.e. the dynamic soil parameters for Dalian seismic microzonation), and the recommended values by Yuan Xiaoming et al. (2000) respectively. The calculated results of peak ground acceleration are compared with the response spectral characteristics. The results show that the statistical values are approximate to the values recommended by Yuan Xiaoming, et al. (2000), but different greatly with the standard values in code 94.

Temporal-spatial Variations of Dynamic Source Parameters in the Capital Circle Region and Its Surrounding Areas before the 2006 M_S5.1 Wenan Earthquake in Hebei Province

Source spectra,corner frequency and zero frequency amplitudes in near-source conditions were measured using waveform data from 989 earthquakes with magnitudes larger than ML2.0 observed by the Beijing Digital Telemetry Seismic Network in the Capital Circle Region of China and its surrounding areas from January 2002 to June 2006 by the Brune model.Relevant formulas that were used for the calculation of dynamic source parameters include rupture radius,seismic moment,seismic energy,stress drop,and apparent stress.Scaling relations and characteristics of temporal-spatial variations of these dynamic parameters before the MS5.1 Wenan earthquake in Hebei Province that occurred on July 20,2006 were analyzed.Results show that apparent stress,stress drop,and the ratio of seismic energy to the rupture radius had relatively high values in some areas before the Wenan earthquake.These high-value concentration areas were mainly distributed in the North China Plain seismic zone.As is seen from the time curves,parameters,such as apparent stress,stress drop,and ratio of seismic energy to rupture radius underwent significant ascending processes before the Wenan earthquake,but the variation in the corner frequency showed a descending trend.This result might be related to the enhancement of stress in the North China Plain seismic zone before the earthquake.

Growth, Mortality and Stock Assessment of Squaliobarbus curriculus (Actinopterygii: Cypriniformes: Xenocyprididae) from Lanxi Section of Qiantang River, China

Population dynamics parameters and stock status of Squaliobarbus curriculus (Richardson, 1846) were analyzed from May to September 2021 in the Lanxi section of Qiantang River. FiSAT II software program was used. The growth coefficient K = 0.21 year–1, asymptomatic length L∞ = 39.48 cm, and age at theoretical zero-length t0 = –0.74 years were estimated. The von Bertalanffy growth function was calculated as Lt = 39.48[1 – e–0.21(t + 0.74)]. The growth curve for weight had an inflection at 5.86 years, corresponding to 29.61 cm in standard length and 372.29 g in weight. The natural mortality rate (M), the fishing mortality rate (F), and the total mortality rate (Z) were calculated as 0.51, 0.61, and 1.12 year–1, respectively. The exploitation ratio (E) was 0.54, which is greater than the value of 0.5 suggested by Gull (1971), indicating a probable state of overdevelopment. The annual average stock number and biomass of S. curriculus in the Lanxi section of Qiantang River were 31.86 × 106 individuals and 3656.82 t, respectively.

Mechanical response of roof rock mass unloading during continuous mining process in underground mine

Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method of the affected zone theory, and the deterioration laws of mechanics parameters of unloading rock mass, the continuous mining process in underground mine was analyzed by the software MIDAS/GTS, the mechanical response of roof rock mass unloading was studied, and the differences were analyzed with the conventional simulation. The result shows that the maximum tensile stress, subsidence displacement and equivalent plastic strain of roof rock mass are 1.5 MPa, 20 cm and 1.5% in the unloading analysis, while 1.0 MPa, 13 cm and 0.9% in the conventional analysis. The values of unloading analysis, which are also closer to the actual situation, are greater than those of conventional analysis; the maximum step in continuous mining is 48 m, which shows that the induced treatment of the roof should be carried out after 2 mining steps

ADAPTIVE GENETIC ALGORITHM BASED ON SIX FUZZY LOGIC CONTROLLERS

The performance of genetic algorithm(GA) is determined by the capability of search and optimization for satisfactory solutions. The new adaptive genetic algorithm(AGA) is built for inducing suitable search and optimization relationship. The use of six fuzzy logic controllers(6FLCs) is proposed for dynamic control genetic operating parameters of a symbolic-coded GA. This paper uses AGA based on 6FLCs to deal with the travelling salesman problem (TSP). Experimental results show that AGA based on 6FLCs is more efficient than a standard GA in solving combinatorial optimization problems similar to TSP.

Exit selection strategy in pedestrian evacuation simulation with multi-exits

A mixed strategy of the exit selection in a pedestrian evacuation simulation with multi-exits is constructed by fusing the distance-based and time-based strategies through a cognitive coefficient, in order to reduce the evacuation imbalance caused by the asymmetry of exits or pedestrian layout, to find a critical density to distinguish whether the strategy of exit selection takes effect or not, and to analyze the exit selection results with different cognitive coefficients. The strategy of exit selection is embedded in the computation of the shortest estimated distance in a dynamic parameter model, in which the concept of a jam area layer and the procedure of step-by-step expending are introduced. Simulation results indicate the characteristics of evacuation time gradually varying against cognitive coefficient and the effectiveness of reducing evacuation imbalance caused by the asymmetry of pedestrian or exit layout. It is found that there is a critical density to distinguish whether a pedestrian jam occurs in the evacuation and whether an exit selection strategy is in effect. It is also shown that the strategy of exit selection has no effect on the evacuation process in the no-effect phase with a low density, and that evacuation time and exit selection are dependent on the cognitive coefficient and pedestrian initial density in the in-effect phase with a high density.

Simulation of pedestrian evacuation based on an improved dynamic parameter model

An improved dynamic parameter model is presented based on cellular automata.The dynamic parameters,including direction parameter,empty parameter,and cognition parameter,are formulated to simplify tactically the process of making decisions for pedestrians.The improved model reflects the judgement of pedestrians on surrounding conditions and the action of choosing or decision.According to the two-dimensional cellular automaton Moore neighborhood we establish the pedestrian moving rule,and carry out corresponding simulations of pedestrian evacuation.The improved model considers the impact of pedestrian density near exits on the evacuation process.Simulated and experimental results demonstrate that the improvement makes sense due to the fact that except for the spatial distance to exits,people also choose an exit according to the pedestrian density around exits.The impact factors 伪,尾,and 纬 are introduced to describe transition payoff,and their optimal values are determined through simulation.Moreover,the effects of pedestrian distribution,pedestrian density,and the width of exits on the evacuation time are discussed.The optimal exit layout,i.e.,the optimal position and width,is offered.The comparison between the simulated results obtained with the improved model and that from a previous model and experiments indicates that the improved model can reproduce experimental results well.Thus,it has great significance for further study,and important instructional meaning for pedestrian evacuation so as to reduce the number of casualties.