The upper reach of the Yellow River from Daliushu to Shapotou consists of five bends and has complex topography. A two-dimensional Re-Normalisation Group （RNG） k-ε model was developed to simulate the flow in the re...The upper reach of the Yellow River from Daliushu to Shapotou consists of five bends and has complex topography. A two-dimensional Re-Normalisation Group （RNG） k-ε model was developed to simulate the flow in the reach. In order to take the circulation currents in the bends into account, the momentum equations were improved by adding an additional source term. Comparison of the numerical simulation with field measurements indicates that the improved two-dimensional depth-averaged RNG k-e model can improve the accuracy of the numerical simulation. A rapid adaptive algorithm was constructed, which can automatically adjust Manning＇s roughness coefficient in different parts of the study river reach. As a result, not only can the trial computation time be significantly shortened, but the accuracy of the numerical simulation can also be greatly improved. Comparison of the simulated and measured water surface slopes for four typical cases shows that the longitudinal and transverse slopes of the water surface increase with the average velocity upstream. In addition, comparison was made between the positions of the talweg and the main streamline, which coincide for most of the study river reach. However, deviations between the positions of the talweg and the main streamline were found at the junction of two bends, at the position where the river width suddenly decreases or increases.展开更多
A combined numerical model for computing mixing areas of pollution vertical jet discharging into tidal flows has been developed. This numerical model is composed of a 2-D depth-averaged dynamic far-field numerical mod...A combined numerical model for computing mixing areas of pollution vertical jet discharging into tidal flows has been developed. This numerical model is composed of a 2-D depth-averaged dynamic far-field numerical model and a 2-D vertical dynamic near-field numerical model. The former uses finite node method to compute velocity, and improved finite node method to compute pollutant concentration distribution; the latter is a k-e turbulence model, and uses SIMPLE (Semi-Implicit Method for Pressure Linked Equations) method to compute velocity. At the same time, the former provides boundary conditions for the latter. This model can simulate both far- field pollutant concentration distribution and near-field vertical recirculation quickly and precisely. This model has been verified by measured data of pollutant F of the Dachang reach of the Changjing River and test data presented by Chen el al. (1992). On the basis of verification, the authors use a designed hydrograph to compute this mixing area for a certain amount of wastewater discharging into the river.展开更多
基金supported by the National Natural Science Foundation of China(Grants No.11361002 and 91230111)the Natural Science Foundation of Ningxia,China(Grant No.NZ13086)+1 种基金the Project of Beifang University of Nationalities,China(Grant No.2012XZK05)the Foreign Expert Project of Beifang University of Nationalities,China,and the Visiting Scholar Foundation of State Key Laboratory of Water Resources and Hydropower Engineering Science,Wuhan University,China(Grant No.2013A011)
文摘The upper reach of the Yellow River from Daliushu to Shapotou consists of five bends and has complex topography. A two-dimensional Re-Normalisation Group （RNG） k-ε model was developed to simulate the flow in the reach. In order to take the circulation currents in the bends into account, the momentum equations were improved by adding an additional source term. Comparison of the numerical simulation with field measurements indicates that the improved two-dimensional depth-averaged RNG k-e model can improve the accuracy of the numerical simulation. A rapid adaptive algorithm was constructed, which can automatically adjust Manning＇s roughness coefficient in different parts of the study river reach. As a result, not only can the trial computation time be significantly shortened, but the accuracy of the numerical simulation can also be greatly improved. Comparison of the simulated and measured water surface slopes for four typical cases shows that the longitudinal and transverse slopes of the water surface increase with the average velocity upstream. In addition, comparison was made between the positions of the talweg and the main streamline, which coincide for most of the study river reach. However, deviations between the positions of the talweg and the main streamline were found at the junction of two bends, at the position where the river width suddenly decreases or increases.
文摘A combined numerical model for computing mixing areas of pollution vertical jet discharging into tidal flows has been developed. This numerical model is composed of a 2-D depth-averaged dynamic far-field numerical model and a 2-D vertical dynamic near-field numerical model. The former uses finite node method to compute velocity, and improved finite node method to compute pollutant concentration distribution; the latter is a k-e turbulence model, and uses SIMPLE (Semi-Implicit Method for Pressure Linked Equations) method to compute velocity. At the same time, the former provides boundary conditions for the latter. This model can simulate both far- field pollutant concentration distribution and near-field vertical recirculation quickly and precisely. This model has been verified by measured data of pollutant F of the Dachang reach of the Changjing River and test data presented by Chen el al. (1992). On the basis of verification, the authors use a designed hydrograph to compute this mixing area for a certain amount of wastewater discharging into the river.
