Using a scanning electron microscope (SEM) in the back-scattered electron (BSE) mode the composition of multi-element specimens may be determined based on the strong dependence of emission coefficient η on the averag...Using a scanning electron microscope (SEM) in the back-scattered electron (BSE) mode the composition of multi-element specimens may be determined based on the strong dependence of emission coefficient η on the average atomic number of elements Z. The output video signal of the usual BSE detectors is produced from their sensors, and the larger proportion of high-energy electrons with modified spectrum is added. Since η = is/ip (is and ip currents of specimen and probe), better accuracy must be achieved by direct measurements those currents on the specimen surface. Here, an experimental model of a current detector for a presented specimen is described. The cage is mounted on the carousel of the moving specimen stage. The input of the preamplifier is connected to the specimen holder in the form of a disk, the diameter of which is 12 mm. When the probe along its surface scanned, the input potential begins to pulsate with a negative polarity. The output of this preamplifier is connected to a small light-emitting diode, which creates intensity-modulated radiation in the chamber. Thus created the light video signal will be picked up by the photomultiplier of the E-T detector. The modes of true SE and BSE are set by applying tens bias volts of various polarities to the specimens or the cage itself.展开更多
Multiple-Input Multiple-Output (MIMO) techniques are promising in wireless communication systems for its high spectral efficiency. Sphere Detector (SD) is favoured in MIMO detection to achieve Maximum-Likelihood (ML) ...Multiple-Input Multiple-Output (MIMO) techniques are promising in wireless communication systems for its high spectral efficiency. Sphere Detector (SD) is favoured in MIMO detection to achieve Maximum-Likelihood (ML) performance. In this paper, we proposed a new SD method for MIMO-Orthogonal Frequency Division Multiplexing (OFDM) systems based on IEEE802.11n, which uses Singular Value Decomposition (SVD) in complex domain to reduce the computation complexity. Furthermore, a new Schnorr-Euchner (SE) enumeration algorithm is also discussed in detail. The computer simulation result shows that the computational complexity and the number of visited nodes can be reduced significantly compared with conventional SD detectors with the same Bit Error Rate (BER) performance.展开更多
The^(74)Se is one of 35 p-nuclei,and^(82)Se is a r-process only nucleus,and their(n,γ)cross sections are vital input parameters for nuclear astrophysics reaction network calculations.The neutron capture cross section...The^(74)Se is one of 35 p-nuclei,and^(82)Se is a r-process only nucleus,and their(n,γ)cross sections are vital input parameters for nuclear astrophysics reaction network calculations.The neutron capture cross section in the resonance range of isotopes and even natural selenium samples has not been measured.Promptγ-rays originating from neutron-induced capture events were detected by four C_(6)D_(6) liquid scintillator detectors at the Back-n facility of China Spallation Neutron Source(CSNS).The pulse height weighting technique(PHWT)was used to analyze the data in the 1 e V to 100 ke V region.The deduced neutron capture cross section was compared with ENDF/B-VIII.0,JEFF-3.2,and JENDL-4.0,and some differences were found.Resonance parameters were extracted by the R-matrix code SAMMY in the 1 e V-1 ke V region.All the cross sections ofnatSe and resonance parameters are given in the datasets.The datasets are openly available at http://www.doi.org/10.11922/sciencedb.j00113.00019.展开更多
采用Monte Carlo方法模拟了HgI_2、非晶Se和CdTe几种直接X射线转换探测器在医用X射线范围(10—100keV)的透过谱、背向散射谱、吸收效率和光电灵敏度.对X射线和HgI_2的作用过程模拟采用了EGSmc Monte Carlo代码系统,对信号电荷的产生考...采用Monte Carlo方法模拟了HgI_2、非晶Se和CdTe几种直接X射线转换探测器在医用X射线范围(10—100keV)的透过谱、背向散射谱、吸收效率和光电灵敏度.对X射线和HgI_2的作用过程模拟采用了EGSmc Monte Carlo代码系统,对信号电荷的产生考虑了电荷产生的高斯噪声和材料深陷阱作用造成的部分电荷收集影响.结果表明,载流子平均自由程(Schubweg)在相对于探测材料厚度较小时,陷阱作用能很大地影响探测灵敏度.HgI_2的灵敏度是非晶Se的5倍以上,CdTe的灵敏度是非晶Se的10倍以上,采用高Z序数材料可以大大提高探测灵敏度.展开更多
文摘Using a scanning electron microscope (SEM) in the back-scattered electron (BSE) mode the composition of multi-element specimens may be determined based on the strong dependence of emission coefficient η on the average atomic number of elements Z. The output video signal of the usual BSE detectors is produced from their sensors, and the larger proportion of high-energy electrons with modified spectrum is added. Since η = is/ip (is and ip currents of specimen and probe), better accuracy must be achieved by direct measurements those currents on the specimen surface. Here, an experimental model of a current detector for a presented specimen is described. The cage is mounted on the carousel of the moving specimen stage. The input of the preamplifier is connected to the specimen holder in the form of a disk, the diameter of which is 12 mm. When the probe along its surface scanned, the input potential begins to pulsate with a negative polarity. The output of this preamplifier is connected to a small light-emitting diode, which creates intensity-modulated radiation in the chamber. Thus created the light video signal will be picked up by the photomultiplier of the E-T detector. The modes of true SE and BSE are set by applying tens bias volts of various polarities to the specimens or the cage itself.
文摘Multiple-Input Multiple-Output (MIMO) techniques are promising in wireless communication systems for its high spectral efficiency. Sphere Detector (SD) is favoured in MIMO detection to achieve Maximum-Likelihood (ML) performance. In this paper, we proposed a new SD method for MIMO-Orthogonal Frequency Division Multiplexing (OFDM) systems based on IEEE802.11n, which uses Singular Value Decomposition (SVD) in complex domain to reduce the computation complexity. Furthermore, a new Schnorr-Euchner (SE) enumeration algorithm is also discussed in detail. The computer simulation result shows that the computational complexity and the number of visited nodes can be reduced significantly compared with conventional SD detectors with the same Bit Error Rate (BER) performance.
基金supported by the National Natural Science Foundation of China(Grant Nos.11875311,11905274,11705156,11605097,and U2032146)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB34030000)。
文摘The^(74)Se is one of 35 p-nuclei,and^(82)Se is a r-process only nucleus,and their(n,γ)cross sections are vital input parameters for nuclear astrophysics reaction network calculations.The neutron capture cross section in the resonance range of isotopes and even natural selenium samples has not been measured.Promptγ-rays originating from neutron-induced capture events were detected by four C_(6)D_(6) liquid scintillator detectors at the Back-n facility of China Spallation Neutron Source(CSNS).The pulse height weighting technique(PHWT)was used to analyze the data in the 1 e V to 100 ke V region.The deduced neutron capture cross section was compared with ENDF/B-VIII.0,JEFF-3.2,and JENDL-4.0,and some differences were found.Resonance parameters were extracted by the R-matrix code SAMMY in the 1 e V-1 ke V region.All the cross sections ofnatSe and resonance parameters are given in the datasets.The datasets are openly available at http://www.doi.org/10.11922/sciencedb.j00113.00019.
文摘采用Monte Carlo方法模拟了HgI_2、非晶Se和CdTe几种直接X射线转换探测器在医用X射线范围(10—100keV)的透过谱、背向散射谱、吸收效率和光电灵敏度.对X射线和HgI_2的作用过程模拟采用了EGSmc Monte Carlo代码系统,对信号电荷的产生考虑了电荷产生的高斯噪声和材料深陷阱作用造成的部分电荷收集影响.结果表明,载流子平均自由程(Schubweg)在相对于探测材料厚度较小时,陷阱作用能很大地影响探测灵敏度.HgI_2的灵敏度是非晶Se的5倍以上,CdTe的灵敏度是非晶Se的10倍以上,采用高Z序数材料可以大大提高探测灵敏度.
