研制了一台体积和重量都较大、设计性能较高的全永磁电子回旋共振(Electron cyclotron resonance, ECR)离子源LAPECR2(Lanzhou all permanent magnetic ECR ion source No．2)。该离子源将用于中国科学院近代物理研究所320 kV高压平台,...研制了一台体积和重量都较大、设计性能较高的全永磁电子回旋共振(Electron cyclotron resonance, ECR)离子源LAPECR2(Lanzhou all permanent magnetic ECR ion source No．2)。该离子源将用于中国科学院近代物理研究所320 kV高压平台,为其提供强流高电荷态离子束流。LAPECR2的研制采用全新的全永磁磁体结构设计,通过采用高性能的NdFeB永磁材料、优化的磁结构设计以及精确的计算,实测源体的磁场参数能达到高性能ECR离子源的设计要求。离子源采用较高频率的14．5 GHz微波馈入加热等离子体,波导直接馈入离子源以增强馈入微波的稳定性与效率。此外,还大量采用了一些有利于提高离子源高电荷态离子产额的关键技术,如铝内衬等离子体弧腔、负偏压盘、铝制等离子体电极、三电极引出系统、辅助掺气等。展开更多
为满足兰州重离子加速器的实验要求,先后在中国科学院近代物理研究所14.5GHz(LECR2)及10GHz+14.5GHz(LECR3)高电荷态ECR离子源上使用MIVOC(Metallic ion fromvolatile compounds)方法进行了高电荷态金属离子产生的实验研究。主要研究了...为满足兰州重离子加速器的实验要求,先后在中国科学院近代物理研究所14.5GHz(LECR2)及10GHz+14.5GHz(LECR3)高电荷态ECR离子源上使用MIVOC(Metallic ion fromvolatile compounds)方法进行了高电荷态金属离子产生的实验研究。主要研究了铁和镍的各种高电荷态离子的产生,具有代表性的是210eμA的Fe11+、175eμA的Fe12+、142eμA的Fe13+、25eμA的Fe16+、64eμA的Ni10+、57eμA的Ni13+、31eμA的Ni15+和15eμA的Ni16+。本文将分别给出两种金属离子产生的多电荷态束流谱图,并对实验装置的安排、实验现象及结果进行讨论与总结。展开更多
Multi-charged helium ion beam He2+ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning.An attempt to genera...Multi-charged helium ion beam He2+ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning.An attempt to generate milliampere multi-charged helium He2+ion beam with a 2.45 GHz electron cyclotron resonance ion source(ECRIS) was tested recently.A design using a specfic permanent magnet 2.45 GHz ECRIS(PMECRIS) source(ERCIS) is reported and the He2+beam production ability is described.With this source,we produced a total helium beam of 40 mA at 40 kV with 180 W of net microwave power and a gas flow of less than 0.5 sccm.At steady state the He2+beam intensity is 4.4 mA,that being the fraction of multi-charged helium ion beam is at approximately 11%.展开更多
A radial sputter probe has been developed for the AECR-U as an additional method of producing metal ion beams.Negative voltage is applied to the probe to incite collisions with target atoms,thereby sputtering material...A radial sputter probe has been developed for the AECR-U as an additional method of producing metal ion beams.Negative voltage is applied to the probe to incite collisions with target atoms,thereby sputtering material into the plasma.The sputter probe is positioned through one of the 6 radial access slots between the permanent hexapole structure of the AECR-U.The probe position can be varied with respect to the inner edge of the hexapole magnet structure.Charge state distributions and peak beam intensities at bias voltages up to-5kV were obtained for gold samples at varying distances of the probe with respect to the plasma.For high charge states production the radial position with respect to the plasma was more sensitive than for the medium and lower charge states.For high charge state ion production the probe was optimized at a distance of 0.6cm inside the chamber wall（4.1cm from the center of the chamber）.Stable beams with peak intensities of up to 28eμA of Au<sup>24+</sup> and 1.42eμA of Au<sup>41+</sup> have been produced using the sputter probe technique. In addition,a solid state circuit under development by Scientific Solutions,Inc which provides a bandwidth up to 100MHz was used to drive the 14GHz klystron amplifier for the LBNL AECR-U ion source.Various broadband and discrete heating modes were tested and the results for high charge state ion production were compared with single frequency heating.展开更多
A Superconducting ECR ion source with Advanced design in Lanzhou （SECRAL） was successfully built to produce intense beams of highly charged ions for Heavy Ion Research Facility in Lanzhou （HIRFL）.The ion source ha...A Superconducting ECR ion source with Advanced design in Lanzhou （SECRAL） was successfully built to produce intense beams of highly charged ions for Heavy Ion Research Facility in Lanzhou （HIRFL）.The ion source has been optimized to be operated at 28GHz for its maximum performance.The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping.For 28GHz operation,the magnet assembly can produce peak mirror fields on axis 3.6T at injection,2.2T at extraction and a radial sextupole field of 2.0T at plasma chamber wall.A unique feature of SECRAL is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. During the ongoing commissioning phase at 18GHz with a stainless steel chamber,tests with various gases and some metals have been conducted with microwave power less than 3.2kW and it turned out the performance is very promising.Some record ion beam intensities have been produced,for instance,810eμA of O<sup>7+</sup>,505eμA of Xe<sup>20+</sup>,306eμA of Xe<sup>27+</sup>,21eμA of Xe<sup>34+</sup>,2.4eμA of Xe<sup>38+</sup> and so on.To reach better results for highly charged ion beams,further modifications such as an aluminium chamber with better cooling,higher microwave power and a movable extraction system will be done,and also emittance measurements are being prepared.展开更多
文摘研制了一台体积和重量都较大、设计性能较高的全永磁电子回旋共振(Electron cyclotron resonance, ECR)离子源LAPECR2(Lanzhou all permanent magnetic ECR ion source No．2)。该离子源将用于中国科学院近代物理研究所320 kV高压平台,为其提供强流高电荷态离子束流。LAPECR2的研制采用全新的全永磁磁体结构设计,通过采用高性能的NdFeB永磁材料、优化的磁结构设计以及精确的计算,实测源体的磁场参数能达到高性能ECR离子源的设计要求。离子源采用较高频率的14．5 GHz微波馈入加热等离子体,波导直接馈入离子源以增强馈入微波的稳定性与效率。此外,还大量采用了一些有利于提高离子源高电荷态离子产额的关键技术,如铝内衬等离子体弧腔、负偏压盘、铝制等离子体电极、三电极引出系统、辅助掺气等。
文摘为满足兰州重离子加速器的实验要求,先后在中国科学院近代物理研究所14.5GHz(LECR2)及10GHz+14.5GHz(LECR3)高电荷态ECR离子源上使用MIVOC(Metallic ion fromvolatile compounds)方法进行了高电荷态金属离子产生的实验研究。主要研究了铁和镍的各种高电荷态离子的产生,具有代表性的是210eμA的Fe11+、175eμA的Fe12+、142eμA的Fe13+、25eμA的Fe16+、64eμA的Ni10+、57eμA的Ni13+、31eμA的Ni15+和15eμA的Ni16+。本文将分别给出两种金属离子产生的多电荷态束流谱图,并对实验装置的安排、实验现象及结果进行讨论与总结。
基金supported by the National Natural Science Foundation of China(Grant Nos.11075008 and 11175009)
文摘Multi-charged helium ion beam He2+ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning.An attempt to generate milliampere multi-charged helium He2+ion beam with a 2.45 GHz electron cyclotron resonance ion source(ECRIS) was tested recently.A design using a specfic permanent magnet 2.45 GHz ECRIS(PMECRIS) source(ERCIS) is reported and the He2+beam production ability is described.With this source,we produced a total helium beam of 40 mA at 40 kV with 180 W of net microwave power and a gas flow of less than 0.5 sccm.At steady state the He2+beam intensity is 4.4 mA,that being the fraction of multi-charged helium ion beam is at approximately 11%.
基金Supported by the Director,Office of Energy Research,Office of High Energy and Nuclear Physics,Nuclear Physics Division of the U.S.Department of Energy under Contract DE AC03-76SF00098
文摘A radial sputter probe has been developed for the AECR-U as an additional method of producing metal ion beams.Negative voltage is applied to the probe to incite collisions with target atoms,thereby sputtering material into the plasma.The sputter probe is positioned through one of the 6 radial access slots between the permanent hexapole structure of the AECR-U.The probe position can be varied with respect to the inner edge of the hexapole magnet structure.Charge state distributions and peak beam intensities at bias voltages up to-5kV were obtained for gold samples at varying distances of the probe with respect to the plasma.For high charge states production the radial position with respect to the plasma was more sensitive than for the medium and lower charge states.For high charge state ion production the probe was optimized at a distance of 0.6cm inside the chamber wall（4.1cm from the center of the chamber）.Stable beams with peak intensities of up to 28eμA of Au<sup>24+</sup> and 1.42eμA of Au<sup>41+</sup> have been produced using the sputter probe technique. In addition,a solid state circuit under development by Scientific Solutions,Inc which provides a bandwidth up to 100MHz was used to drive the 14GHz klystron amplifier for the LBNL AECR-U ion source.Various broadband and discrete heating modes were tested and the results for high charge state ion production were compared with single frequency heating.
基金Supported by CAS Knowledge Innovation Program (KJCX1-09)Natural Science Foundation of China for Distinguished Young Scientists (10225523)
文摘A Superconducting ECR ion source with Advanced design in Lanzhou （SECRAL） was successfully built to produce intense beams of highly charged ions for Heavy Ion Research Facility in Lanzhou （HIRFL）.The ion source has been optimized to be operated at 28GHz for its maximum performance.The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping.For 28GHz operation,the magnet assembly can produce peak mirror fields on axis 3.6T at injection,2.2T at extraction and a radial sextupole field of 2.0T at plasma chamber wall.A unique feature of SECRAL is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. During the ongoing commissioning phase at 18GHz with a stainless steel chamber,tests with various gases and some metals have been conducted with microwave power less than 3.2kW and it turned out the performance is very promising.Some record ion beam intensities have been produced,for instance,810eμA of O<sup>7+</sup>,505eμA of Xe<sup>20+</sup>,306eμA of Xe<sup>27+</sup>,21eμA of Xe<sup>34+</sup>,2.4eμA of Xe<sup>38+</sup> and so on.To reach better results for highly charged ion beams,further modifications such as an aluminium chamber with better cooling,higher microwave power and a movable extraction system will be done,and also emittance measurements are being prepared.
