Interpretation of electrochemical impedance spectroscopy(EIS) circuit model for soils

Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were proposed, which contain 6 meaningful resistance and reactance parameters. Considering the conductive properties of soils and dispersion effects, mathematical equations for impedance under various circuit models were deduced and studied. The mathematical expression presents two semicircles for theoretical EIS Nyquist spectrum, in which the center of one semicircle is degraded to simply the equivalent model. Based on the measured parameters of EIS Nyquist spectrum, meaningful soil parameters can easily be determined. Additionally, EIS was used to investigate the soil properties with different water contents along with the mathematical relationships and mechanism between the physical parameters and water content. Magnitude of the impedance decreases with the increase of testing frequency and water content for Bode graphs. The proposed model would help us to better understand the soil microstructure and properties and offer more reasonable explanations for EIS spectra.

Semi-supervised estimation of capacity degradation for lithium ion batteries with electrochemical impedance spectroscopy

Machine learning-based methods have emerged as a promising solution to accurate battery capacity estimation for battery management systems.However,they are generally developed in a supervised manner which requires a considerable number of input features and corresponding capacities,leading to prohibitive costs and efforts for data collection.In response to this issue,this study proposes a convolutional neural network(CNN)based method to perform end-to-end capacity estimation by taking only raw impedance spectra as input.More importantly,an input reconstruction module is devised to effectively exploit impedance spectra without corresponding capacities in the training process,thereby significantly alleviating the cost of collecting training data.Two large battery degradation datasets encompassing over 4700 impedance spectra are developed to validate the proposed method.The results show that accurate capacity estimation can be achieved when substantial training samples with measured capacities are given.However,the estimation performance of supervised machine learning algorithms sharply deteriorates when fewer samples with measured capacities are available.In this case,the proposed method outperforms supervised benchmarks and can reduce the root mean square error by up to 50.66%.A further validation under different current rates and states of charge confirms the effectiveness of the proposed method.Our method provides a flexible approach to take advantage of unlabelled samples for developing data-driven models and is promising to be generalised to other battery management tasks.

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY STUDY OF CORROSION INHIBITION OF MODIFIED LIGNOSULPHONATE FOR CARBON STEEL

The corrosion inhibition for carbon steel in circulating cooling water by modified lignosulphonate has been investigated using electrochemical impedance spectroscopy technique. Results show that the inhibition efficiency of modified lignosulphonate GCL2 is a great improvement on that of lignosulphonate. The maximum inhibition efficiency of GCL2 reaches 99.21% at the concentration of 400mg·L-1 at 303K. The corrosion inhibition of GCL2 is attributed to forming adsorption film on the metal surface for the electrochemical impedance spectroscopy in GCL2 solution shows more than one time-constant. Moreover, results also indicate that it is more efficient in stirring solution than in still solution for GCL2 because the constant of adsorption in stirring solution is much larger than that in still solution. The adsorption of inhibitor GCL2 follows Langmuir’s adsorption isotherm.

Fast Evaluation of Degradation Degree of Organic Coatings by Analyzing Electrochemical Impedance Spectroscopy Data

The degradation coefficient is proposed to evaluate the degradation degree of organic coatings by directly analyzing the Bode plots of the electrochemical impedance spectroscopy (EIS) data.This paper investigated the degradation of phenolic epoxy coating/tinplate system by EIS and the degradation coefficient value,which correlates well with the results of breakpoint frequency and variation of phase angle at 10 Hz.Furthermore,the degradation process was confirmed by scanning electron microscope (SEM) and scanning probe microscopy (SPM).It is concluded that degradation coefficient can be used for the fast evaluation of degradation degree of organic coatings in practical applications.

Electrochemical impedance spectroscopy study on the corrosion of the weld zone of 3Cr steel welded joints in CO_2 environments

The welded joints of 3Cr pipeline steel were fabricated with commercial welding wire using the gas tungsten arc welding(GTAW) technique. Potentiodynamic polarization curves, linear polarization resistance(LPR), electrochemical impedance spectroscopy(EIS), scanning electron microscopy(SEM), and energy-dispersive spectrometry(EDS) were used to investigate the corrosion resistance and the growth of a corrosion film on the weld zone(WZ). The changes in electrochemical characteristics of the film were obtained through fitting of the EIS data. The results showed that the average corrosion rate of the WZ in CO2 environments first increased, then fluctuated, and finally decreased gradually. The formation of the film on the WZ was divided into three stages: dynamic adsorption, incomplete-coverage layer formation, and integral layer formation.

Localized Electrochemical Impedance Spectroscopy Study on the Corrosion Behavior of Fe-Cr Alloy in the Solution with Cl^- and SO_4^(2-)

The corrosion behaviors of Fe-Cr alloy under three different pH values solutions with Cl- and SO42- were investigated by localized electrochemical impedance spectroscopy (LEIS) measurements and the corrosion products were analyzed by laser Raman spectrometry. The results show that the high corrosion resistance of Fe-Cr Alloy is attributed to a passive film which is formed more easily when the alloy contains a large quantity of Cr element. However, its corrosion resistance varies in the solutions with different pH values, especially in the initial corrosion. The average impedance values in neutral and alkaline solution are much higher than that in acidic solution because the passive film is more likely to dissolve in the acidic condition. Moreover, the destructive effect of Cl- and SO42+ ions on the passive film is also demonstrated in corrosion process through the change of the impedance value with the steeping time.

Exfoliation corrosion susceptibility of 8090 Al-Li alloy examined by electrochemical impedance spectroscopy

The exfoliation corrosion susceptibility and electrochemical impedance spectrosc opy(EIS) of rolled and peak-aged 8090 Al-Li alloys in EXCO solution were studi ed,and the EIS after exfoliation was simulated. Once exfoliation occurs,two ca pacitive arcs appear in the EIS at high-mediate frequency and mediate-low freq uency respectively. The exfoliation-attacked alloy surface consists of two part s,an original flat alloy surface and a new inter-face exposed to EXCO solution due to the exfoliation. The capacitance corresponding to the new exfoliation in ter-face increases approximately linearly with time at early exfoliation stage,due to the enlargement of the new inter-face. Then it maintains stable,due to the corrosion product covering on the new inter-face. The exfoliation suscepti bility can be judged through the average slope of the capacitance vs time curve of the early exfoliation stage. This average slope of the rolled 8090 alloy is m uch higher than that of the peak-aged 8090 alloy,accordingly the rolled 8090 a lloy is more susceptible to exfoliation than the peak-aged 8090 alloy.

Investigation of exfoliation corrosion of rolled AA8090 Al-Li alloy using electrochemical impedance spectroscopy

The exfoliation morphologies and electrochemical impedance spectroscopy (EIS) features of as received rolled AA8090 Al Li alloy in EXCO solution were studied. The EIS was simulated using an equivalent circuit. The results show that once the exfoliation occurs, the EIS is composed of two capacitive arcs at high frequency and mediate low frequency; among them, the capacitance corresponding to high frequency ( C 1) is originated from original flat alloy surface, while the capacitance corresponding to mediate low frequency ( C 2) from new interface exposed to EXCO solution due to the exfoliation and the ratio of C 2 to C 1 increases with exfoliation degree. It is advanced that the exfoliation degree can be quantitatively judged through this ratio.

Effect of sulphate-reducing bacteria on the electrochemical impedance spectroscopy characteristics of 1Cr18Ni9Ti

The electrochemical characteristics of 1Cr18Ni9Ti in sulphate-reducing bacteria (SRB) solutions and the biofilm of SRB on the surface of the 1Cr18Ni9Ti electrode were studied by electrochemical, microbiological, and surface analysis methods. Electro- chemical impedance spectroscopy (EIS) of 1Cr18Ni9Ti was measured in the solutions with and without SRB at the culture time of 2, 4, 8 d, respectively. The measurement used two test methods, the nonimmersion electrode method and the immersion electrode method. It was found that the polarization resistance (Rp) of 1Cr18Ni9Ti in the solutions without SRB is the greatest for each test method. When using the nonimmersion electrode method, Rp shifts negatively at first and then positively, and the time constant is only one. Although using the immersion electrode method, the Rp shifts positively at first and then negatively, and the time constant also changes when the biofilm forms. The biofilm observed through SEM is with pores. It was demonstrated that SRB has acceler- ated corrosion action on 1Cr18Ni9Ti. The protection effect of the biofilm on the electrode depends on the compact degree of the film.

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY DURING CORROSION PROCESS OF 8090 Al-Li ALLOY IN EXCO SOLUTION

The corrosion behavior and electrochemical impedance spectroscopy (EIS) features of 8090 Al-Li alloys in EXCO solution were investigated, and the EIS was simulated using an equivalent circuit. At the beginning of immersion in EXCO solution, the EIS is comprised by a depressed capacitive arc at high-mediate frequency and an inductive arc at low frequency, and the inductive component decreases and disappears with im- mersion time. Once exfoliation or severe pitting corrosion is produced, two capacitive arcs appear in the EIS. These two capacitive arcs are originated from the two parts of the corroded alloy surface, the original flat alloy surface and the new inter-face exposed to the aggressive EXCO solution due to the exfoliation or pitting corrosion. Some corrosion development features of 8090 Al-Li alloys in EXCO solution can be obtained through simulated EIS information.

Constituent phases of the passive film formed on 2205 stainless steel by dynamic electrochemical impedance spectroscopy

The passive film formed on 2205 duplex stainless steel(DSS) in 0.5 M NaHCO3+0.5 M NaCl aqueous solution was characterized by electrochemical measurements,including potentiodynamic anodic polarization and dynamic electrochemical impedance spectroscopy(DEIS).The results demonstrate that there is a great difference between the passive film evolutions of ferrite and austenite.The impedance values of ferrite are higher than those of austenite.The impedance peaks of ferritic and austenitic phases correspond to the potential of 0.15 and 0.25 V in the low potential range and correspond to 0.8 and 0.75 V in the high potential range.The evolutions of the capacitance of both phases are reverse compared to the evolutions of impedance.The thickness variations obtained from capacitance agree well with those of impedance analysis.The results can be used to explain why pitting corrosion occurs more easily in austenite phase than in ferrite phase.

Study on pitting process of 316L stainless steel by means of staircase potential electrochemical impedance spectroscopy

Pitting corrosion of 316L stainless steel in NaCl solution was investigated by means of staircase potential electrochemical impedance spectroscopy(SPEIS).The investigation focused on the transition of stainless steel from the passive state to pitting corrosion.Based on the evolution of electrical parameters of the equivalent electrical circuit,it is suggested that the most probable mechanism of pit creation is the film breaking model.The result demonstrates that staircase potential electrochemical impedance spectroscopy is an effective method for the investigation of pitting corrosion.

Characterization of Formation Kinetics of Self-Assembled Thiol Monolayers on Gold by Electrochemical Impedance Spectroscopy

Self-assembled monolayers of octadecanethiol (ODT) on gold have been studied by electrochemical impedance spectroscopy (EIS). The fractional coverage has been examined as a function of immersion time of Au in ODT deposition solution. The fractional coverage exhibits two distinct adsorption steps: an initial rapid step followed by a slow one. The fractional coverage of ODT monolayer increases sharply from zero to more than 99% of its maximum within the first minute. However, it takes a day for the fractional coverage to approach its final value.

Analysis of 3.4 Ah lithium-sulfur pouch cells by electrochemical impedance spectroscopy

Despite great progress in lithium-sulfur(Li-S) batteries, the electrochemical reactions in the cell are not yet fully understood. Electrode processes, complex interfaces and internal resistance may be characterized by electrochemical impedance spectroscopy(EIS). EIS is a non-destructive technique and easy to apply, though there are challenges in ensuring the reproducibility of measurements and the interpretation of impedance data. Here, we present the impedance behavior of a 3.4 Ah Li-S pouch cell characterized by EIS. The impedance changes were analyzed over the entire depth-of-discharge, depth-of-charge,and at various temperatures. Based on the formation of intermediates during(dis)charging, the changes of resistances are observed. Overall, the increase in temperature causes a decrease in electrolyte viscosity,lowering the surface energy which can improve the penetration of the electrolyte into the electrode pores. Moreover, the effect of superimposed AC current during EIS measurement was analyzed, and the results show the dependence of the charge transfer resistance on superimposed AC current which was lower compared to steady-state conditions and consents with theory.

Electrochemical Impedance Spectroscopy for Investigation on Ion Permeation in Thioctic Acid Self-Assembled Monolayer

Electrochemical impedance spectroscopy was employed to investigate the permeation of electrolyte ions in thioctic acid self-assembled monolayer when its structure was changed by the interaction of copper ions. The ion permeation was evaluated by using relatively low excitation frequencies, 0.2 Hz to 1000 Hz, and quantified by an extra resistive component in the equivalent circuit (RSAM). The extent of ion permeation affected by the electrode potentials and the electrolyte concentration were investigated. The experimental results verified that RSAM decreased ~70% by interaction with copper ions and that RSAM increased ~2 - 3 times when the electrolyte concentration was decreased by 10 times. This analysis can be performed without addition of redox species.

Electrochemical Impedance Spectroscopy of Hybrid Epoxy Resin Emulsion Coatings

A hybrid epoxy resin one pack emulsion with acrylate was synthesized for application in the field of corrosion protec- tion. Electrochemical impedance tests were applied to steel specimens coated with hybrid epoxy and tested after im- mersion in 3.5% NaCl solution at room temperature. Results taken from Nyquist and Bode plots as were analyzed by means of software provided with the instrument. Specimens were examined under scanning electron microscope shows a clear rupture and degradation in hybrid epoxy coating after prolonged exposer to salt solution.

Electrochemical Behavior of Alumix 321 PM and AA6061 Alloys in 3.5 wt% NaCl Solution by Electrochemical Impedance Spectroscopy Measurements

Powder metallurgy (PM) is a very interesting metal manufacturing technique in the production of automotive components of a net or near net shape. In this research, the electrochemical corrosion behavior of a commercially available aluminum powder alloy known as Alumix 321 was investigated and compared to wrought alloy AA6061 in 3.5 wt% NaCl solution using Electrochemical Impedance Spectroscopy Measurements (EIS). Alumix 321 alloy samples were prepared by pressing the powder at pressures ranging from 50 to 500 MPa and subsequently sintering them for 30 min at 630°C. It was found that the presence of pores and their morphology strongly affect the corrosion behavior the PM samples.

Characteristics of sealed plasma electrolytic oxidation coatings with electrochemical impedance spectroscopy

Plasma electrolytic oxidation(PEO) coatings are prepared on aluminium with graphite powders added into the electrolyte.The scanning electron microscopy(SEM) coupled with an energy dispersive x-ray analysis system(EDX) is used to characterize the surface and the cross-section morphologies of the coatings.The electrochemical impedance spectroscopy(EIS) is used not only to evaluate the corrosion resistance but also to analyse the structure of the coating. Results show that graphite powders are embedded in the PEO coating.The corrosion resistances of both the inner barrier and the outer porous layer are greatly improved,and the EIS could give some valuable detailed information about the coating structure.

基于EIS技术的低功耗猪肉细胞阻抗谱测试系统研究

现代肉类细胞阻抗谱检测技术是肉类细胞活性检测中一项新兴技术。该文通过对猪肉细胞组织进行分析,设计并仿真猪肉细胞阻抗谱检测电极,并用光刻技术进行电极的制作。向电极输入不同频率的激励来测试细胞阻抗谱,通过阻抗谱和猪肉的贮藏时间分析关联性,从而构建一个快速猪肉细胞新鲜度检测系统。同时,为增加便携式猪肉细胞检测设备的实用性,基于EIS技术对便携式设备的电池电化学阻抗谱中提取获得有关电池内部反应的信息,分析所得到的阻抗与频率之间的关系,揭示电池的各种性能参数,从而进行电池优化。