Many megacities (such as Shanghai) are located in coastal areas, therefore, coastline monitoring is critical for urban security and urban development sustainability. A shoreline is defined as the intersection between ...Many megacities (such as Shanghai) are located in coastal areas, therefore, coastline monitoring is critical for urban security and urban development sustainability. A shoreline is defined as the intersection between coastal land and a water surface and features seawater edge movements as tides rise and fall. Remote sensing techniques have increasingly been used for coastline extraction;however, traditional hard classification methods are performed only at the pixel-level and extracting subpixel accuracy using soft classification methods is both challenging and time consuming due to the complex features in coastal regions. This paper presents an automatic sub-pixel coastline extraction method (ASPCE) from high-spectral satellite imaging that performs coastline extraction based on spectral mixture analysis and, thus, achieves higher accuracy. The ASPCE method consists of three main components: 1) A Water-Vegetation-Impervious-Soil (W-V-I-S) model is first presented to detect mixed W-V-I-S pixels and determine the endmember spectra in coastal regions;2) The linear spectral mixture unmixing technique based on Fully Constrained Least Squares (FCLS) is applied to the mixed W-V-I-S pixels to estimate seawater abundance;and 3) The spatial attraction model is used to extract the coastline. We tested this new method using EO-1 images from three coastal regions in China: the South China Sea, the East China Sea, and the Bohai Sea. The results showed that the method is accurate and robust. Root mean square error (RMSE) was utilized to evaluate the accuracy by calculating the distance differences between the extracted coastline and the digitized coastline. The classifier’s performance was compared with that of the Multiple Endmember Spectral Mixture Analysis (MESMA), Mixture Tuned Matched Filtering (MTMF), Sequential Maximum Angle Convex Cone (SMACC), Constrained Energy Minimization (CEM), and one classical Normalized Difference Water Index (NDWI). The results from the three test sites indicated that the proposed ASPCE method extracted coastlines more efficiently than did the compared methods, and its coastline extraction accuracy corresponded closely to the digitized coastline, with 0.39 pixels, 0.40 pixels, and 0.35 pixels in the three test regions, showing that the ASPCE method achieves an accuracy below 12.0 m (0.40 pixels). Moreover, in the quantitative accuracy assessment for the three test sites, the ASPCE method shows the best performance in coastline extraction, achieving a 0.35 pixel-level at the Bohai Sea, China test site. Therefore, the proposed ASPCE method can extract coastline more accurately than can the hard classification methods or other spectral unmixing methods.展开更多
Mangroves are woody plant communities in the intertidal zone of tropical and subtropical coasts that play an important role in these zones. The infrared wave band is one of the key bands in the remote sensing identifi...Mangroves are woody plant communities in the intertidal zone of tropical and subtropical coasts that play an important role in these zones. The infrared wave band is one of the key bands in the remote sensing identification of mangrove forest, and ALI（advanced land imagery） has a large number of infrared bands. Two angle indices were proposed based on liquid water absorption at band 5p and band 5 of EO-1 ALI, denoted as β1.25 and β1.65 respectively. A decision tree method was adopted to identify mangrove forest using remote sensing techniques for β1.25–β1.65 and NDVI（normalized difference vegetation index） for EO-1 ALI imagery acquired at Shenzhen Bay. The results showed that the reflectance of mangrove forests at band 5p and band 5 was significantly lower than that of terrestrial vegetation due to the characteristics of coastal wetlands of mangrove forests. This resulted in a greater β1.25–β1.65 value for mangrove forest than terrestrial vegetation. The decision tree method using β1.25–β1.65 and NDVI effectively identifies mangrove forest from other land cover categories. The misclassification and leakage rates were 4.29% and 5.11% respectively. ALI sensors with many infrared bands could play an important role in discriminating mangrove forest.展开更多
基金the National Natural Science Foundation of China (Grant Nos. 41401489 and 41376178)Shanghai Foundation for University Youth Scholars (Project No. ZZHY13033)the Innovation Programme of the Shanghai Municipal Education Commission (Project No. 15ZZ082).
文摘Many megacities (such as Shanghai) are located in coastal areas, therefore, coastline monitoring is critical for urban security and urban development sustainability. A shoreline is defined as the intersection between coastal land and a water surface and features seawater edge movements as tides rise and fall. Remote sensing techniques have increasingly been used for coastline extraction;however, traditional hard classification methods are performed only at the pixel-level and extracting subpixel accuracy using soft classification methods is both challenging and time consuming due to the complex features in coastal regions. This paper presents an automatic sub-pixel coastline extraction method (ASPCE) from high-spectral satellite imaging that performs coastline extraction based on spectral mixture analysis and, thus, achieves higher accuracy. The ASPCE method consists of three main components: 1) A Water-Vegetation-Impervious-Soil (W-V-I-S) model is first presented to detect mixed W-V-I-S pixels and determine the endmember spectra in coastal regions;2) The linear spectral mixture unmixing technique based on Fully Constrained Least Squares (FCLS) is applied to the mixed W-V-I-S pixels to estimate seawater abundance;and 3) The spatial attraction model is used to extract the coastline. We tested this new method using EO-1 images from three coastal regions in China: the South China Sea, the East China Sea, and the Bohai Sea. The results showed that the method is accurate and robust. Root mean square error (RMSE) was utilized to evaluate the accuracy by calculating the distance differences between the extracted coastline and the digitized coastline. The classifier’s performance was compared with that of the Multiple Endmember Spectral Mixture Analysis (MESMA), Mixture Tuned Matched Filtering (MTMF), Sequential Maximum Angle Convex Cone (SMACC), Constrained Energy Minimization (CEM), and one classical Normalized Difference Water Index (NDWI). The results from the three test sites indicated that the proposed ASPCE method extracted coastlines more efficiently than did the compared methods, and its coastline extraction accuracy corresponded closely to the digitized coastline, with 0.39 pixels, 0.40 pixels, and 0.35 pixels in the three test regions, showing that the ASPCE method achieves an accuracy below 12.0 m (0.40 pixels). Moreover, in the quantitative accuracy assessment for the three test sites, the ASPCE method shows the best performance in coastline extraction, achieving a 0.35 pixel-level at the Bohai Sea, China test site. Therefore, the proposed ASPCE method can extract coastline more accurately than can the hard classification methods or other spectral unmixing methods.
基金National Natural Science Foundation of China(41201461)
文摘Mangroves are woody plant communities in the intertidal zone of tropical and subtropical coasts that play an important role in these zones. The infrared wave band is one of the key bands in the remote sensing identification of mangrove forest, and ALI（advanced land imagery） has a large number of infrared bands. Two angle indices were proposed based on liquid water absorption at band 5p and band 5 of EO-1 ALI, denoted as β1.25 and β1.65 respectively. A decision tree method was adopted to identify mangrove forest using remote sensing techniques for β1.25–β1.65 and NDVI（normalized difference vegetation index） for EO-1 ALI imagery acquired at Shenzhen Bay. The results showed that the reflectance of mangrove forests at band 5p and band 5 was significantly lower than that of terrestrial vegetation due to the characteristics of coastal wetlands of mangrove forests. This resulted in a greater β1.25–β1.65 value for mangrove forest than terrestrial vegetation. The decision tree method using β1.25–β1.65 and NDVI effectively identifies mangrove forest from other land cover categories. The misclassification and leakage rates were 4.29% and 5.11% respectively. ALI sensors with many infrared bands could play an important role in discriminating mangrove forest.
