Rising utilization of stable isotopes in tree rings for climate change and forest ecology

Analyses of stable isotopes(C,O,H)in tree rings are increasingly important cross-disciplinary programs.The rapid development in this field documented in an increasing number of publications requires a comprehensive review.This study includes a bibliometric analysis-based review to better understand research trends in tree ring stable isotope research.Overall,1475 publications were selected from the Web of Science Core Collection for 1974-2023.The findings are that:(1)numbers of annual publications and citations increased since 1974.From 1974 to 1980,there were around two relevant publications per year.However,from 2020 to 2022,this rose sharply to 109 publications per year.Likewise,average article citations were less than four per year before 1990,but were around four per article per year after 2000;(2)the major subjects using tree ring stable isotopes include forestry,geosciences,and environmental sciences,contributing to 42.5%of the total during 1974-2023;(3)the top three most productive institutions are the Chinese Academy of Sciences(423),the Swiss Federal Institute for Forest,Snow and Landscape Research(227),and the University of Arizona(204).These achievements result from strong collaborations;(4)review papers,for example,(Dawson et al.,Annu Rev Ecol Syst 33:507-559,2002)and(McCarroll and Loader,Quat Sci Rev 23:771-801,2004),are among the most cited,with more than 1000 citations;(5)tree ring stable isotope studies mainly focus on climatology and ecology,with atmospheric CO_(2) one of the most popular topics.Since 2010,precipitation and drought have received increasing attention.Based on this analysis,the research stages,key findings,debated issues,limitations and direc-tions for future research are summarized.This study serves as an important attempt to understand the progress on the use of stable isotopes in tree rings,providing scientific guid-ance for young researchers in this field.

Cover story: Neuromodulation Brings Sunshine to Diseased Brains

Various invasive and non-invasive brain modulation methods are widely used to regulate sensory,cognitive,and motor functions both within local and large brain networks.This special issue provides innovative studies to optimize relevant methods and understand their neural mechanisms,paving the way for personalized neuromodulation of cognitive function.The cover of this issue uses the image of the four heavenly Kings in Chinese culture who are in charge of good weather.It compares the process of neuroregulation technology that integrates the principles of sound,light electricity or magnetism in treating the diseased brain,to the moment when these gods cast their spells to bring sunshine and peace to the human brain in the midst of lightning and thunder.

Effectivity and safety of trifocal intraocular lenses and capsular tension rings implantation for cataract patients with axial high myopia

●AIM:To assess effectivity and safety of trifocal intraocular lenses(IOLs)and capsular tension rings in treating cataract patients with axial high myopia.●METHODS:A prospective nonrandomized controlled clinical trial was conducted.Totally 98 eyes(74 patients)who underwent femtosecond laser-assisted cataract surgery(FLACS)with trifocal IOLs were enrolled in the study and followed up for 2y after surgery:46 eyes(33 patients)with capsular tension ring implantation in the long axial lengths(AL)group(26<AL<29 mm)and 52 eyes(41 patients)in the normal AL group(22<AL<24.5 mm).Postoperative outcomes about effectivity and safety,including the subjective and objective visual quality,and postoperative complications were assessed.●RESULTS:Uncorrected distance visual acuity at 5 m and uncorrected intermediate visual acuity at 60 and 80 cm in the long AL group were significantly worse than those in the normal AL group at 3mo postoperatively(P<0.05).The differences in reading speed,spectacle independence and potential visual complaints between the two groups were not statistically significant(P>0.05).The dysfunctional lens index and total modulation transfer function(MTF)average height were similar between the two groups.The postoperative internal coma aberrations in the axial high myopia eyes were significantly higher than that in the normal AL group(P<0.05).The total satisfaction score in the long AL group(91.32±2.76)was slightly higher than that in the normal AL group(90.36±3.47),but there was no difference(P=0.136).A statistically negative correlation was found between corrected distance visual acuity(CDVA)and dysfunctional lens index(r=-0.382,P=0.009),and between CDVA and the total MTF average height(r=-0.374,P=0.01).But there was no significant correlation between CDVA and total satisfaction score(r=0.059,P=0.696).Postoperative complications mainly presented as posterior capsular opacity(PCO),retinal detachment and cystoid macular edema.There was no difference in the incidence of fundus disease(6.5%vs 3.8%,P=0.663)or PCO(17.4%vs 7.7%,P=0.217)between the two groups at two years.●CONCLUSION:The utilization of trifocal IOL and capsular tension ring implantation is beneficial for cataract patients with axial high myopia undergoing FLACS.This approach not only ensures excellent subjective feelings and objective visual quality,but also does not increase the incidence of postoperative complications.

深水采油树Spring-Seal密封圈接触模型构建与实验测试

为提高深水采油树在高压、高温、低温等工况下长时间工作的稳定性,对采油树密封圈进行重新设计,提出Spring-Seal密封圈(以下简称S密封圈);基于赫兹接触理论、填料密封接触理论,重新构建S密封圈接触力学模型;建立有限元仿真分析模型,分析不同条件下S密封圈的密封性能,同时验证新建接触模型的合理性;利用实验测试S密封圈的实际密封效果。研究结果表明:S密封圈在高压、高温、低温等工况下能够长时间稳定工作且密封性能良好。研究结果可为S密封圈的接触研究及工程运用提供理论参考。

Stability of neodymium:YAG laser posterior capsulotomy in eyes with capsular tension rings

·AIM: To evaluate the stability of neodymium(Nd):YAG laser posterior capsulotomy in eyes with capsular tension rings(CTRs).·METHODS: A total of 60 eyes that underwent cataract surgery and laser posterior capsulotomy postoperatively were included in this retrospective cohort study. To evaluate the safety and stability of capsulotomy, changes in the size of posterior capsulotomy and anterior chamber depth(ACD) in three groups: the group without CTR, the group with 12 mm CTRs, and the group with 13 mm CTRs, at 1wk, 3, 12, and 15mo after capsulotomy, were compared. ·RESULTS: In the group without CTR and the group with 12 mm CTR, there was no significant change in ACD at every post-laser follow-up. In the group with 13 mm CTR, the ACD change was significant until 3mo after capsulotomy. In all groups, there was a significant increase in the area of capsulotomy between 1wk and 3mo post-laser. Between 3 and 12mo post-laser, only the group with 13 mm CTR showed a significant increase in the area of capsulotomy(P<0.01). ·CONCLUSION: Laser posterior capsulotomy is safe in all three groups. The capsulotomy and ACD become stabilized and have not shown significant changes since 1y postlaser, even with larger CTRs. The maintenance of centrifugal capsular tension can last longer with larger CTRs, and the stability of the capsulotomy site can be reached about 12mo after capsulotomy in pseudophakic eyes with larger CTRs.

β-Ga_(2)O_(3) junction barrier Schottky diode with NiO p-well floating field rings

Recently,β-Ga_(2)O_(3),an ultra-wide bandgap semiconductor,has shown great potential to be used in power devices blessed with its unique material properties.For instance,the measured average critical field of the vertical Schottky barrier diode(SBD)based onβ-Ga_(2)O_(3) has reached 5.45 MV/cm,and no device in any material has measured a greater before.However,the high electric field of theβ-Ga_(2)O_(3) SBD makes it challenging to manage the electric field distribution and leakage current.Here,we showβ-Ga_(2)O_(3) junction barrier Schottky diode with NiO p-well floating field rings(FFRs).For the central anode,we filled a circular trench array with NiO to reduce the surface field under the Schottky contact between them to reduce the leakage current of the device.For the anode edge,experimental results have demonstrated that the produced NiO/β-Ga_(2)O_(3) heterojunction FFRs enable the spreading of the depletion region,thereby mitigating the crowding effect of electric fields at the anode edge.Additionally,simulation results indicated that the p-NiO field plate structure designed at the edges of the rings and central anode can further reduce the electric field.This work verified the feasibility of the heterojunction FFRs inβ-Ga_(2)O_(3) devices based on the experimental findings and provided ideas for managing the electric field ofβ-Ga_(2)O_(3) SBD.

AusMed Brings Game-Changing Healthcare Innovations from Hong Kong,China to the World——An interview with Christine Yip,Founder and CEO of AusMed Global Limited

“As a non-invasive alternative to the traditional finger-prick blood ketone testing devices,boasting a high level of accuracy comparable to industrial gold standards typically attainable only through bulky and expensive specialty equipment,we proudly introduce the world’s first-of-its-kind handheld breath ketone(BrAce)analyser,empowered by our patented disruptive photonic sensing technologies.These innovations are aimed at providing a more effective approach to managing diabetes and ketosis(fat metabolism),”said Christine Yip,founder and CEO of AusMed Global Limited,during a recent interview with China’s Foreign Trade magazine.

Studying Tuff Rings and Volcanic Hazards in a Tropical Setting: The Case of the Batoke Tuff Ring, Limbe, SW Region Cameroon

In subtropical volcanic environments, there are often few accessible outcrops. These are often highly weathered and of very poor quality. Soil development is rapid (1 cm/y) and small eruptions are unlikely to be preserved in the geological record. Reconstructing past eruptions and assessing hazards is a challenge. Here, we studied a poorly outcropping tuff ring (very poor, incomplete sections) with the best outcrop observed at a beach cliff (up to ca. 5 - 10 m high) at Batoke, to the south of Mt Cameroon volcano. Mt Cameroon has a few tuff rings, currently of unknown ages, near the SW coast of Cameroon. In the Batoke case, the sequence is dominated by gently dipping tuff beds varying in the proportion of lithics, juvenile clasts, and accretionary lapilli (acc-laps). Several beds are close-packed with acc-laps of up to 10 - 15 mm diameter. Part of the section is gullied by mud flow deposits. The rocks are highly weathered but differential weathering enhances relationships. Quantitative data can be extracted from a detailed study of outcrops’ external surfaces. The preserved section is close to where the deposits were initially thickest and where acc-laps were most abundant and largest. There is an empirical correlation between maximum acc-lap size in the thickest outcrop and eruption column height. This and the deposit features suggest that the Batoke eruption was pulsating but dominated by fallout, with a water and ice-rich eruption column reaching 10 - 15 km high. Recycling of water drops and ice-coated fine ash accumulated during eruption. At switch off, wholesale gravitational collapse of this material produced the mud flows, which gullied the previously-laid down deposits. Such ash fall and mud flows can represent a substantial hazard, e.g. they can gully down through towns and roads and cut evacuation routes. This study illustrates how, at subtropical tuff rings, it is possible to extract key data needed for hazard assessment from only 1 - 2 poor outcrops.

Relative Ding Projective Modules over Formal Triangular Matrix Rings

Let U be a (B, A)-bimodule, A and B be rings, and be a formal triangular matrix ring. In this paper, we characterize the structure of relative Ding projective modules over T under some conditions. Furthermore, using the left global relative Ding projective dimensions of A and B, we estimate the relative Ding projective dimension of a left T-module.

Penile and scrotal strangulation by stainless steel rings in an human immunodeficiency virus positive man: A case report

BACKGROUND Penoscrotal constriction devices are either used as autoerotic stimuli or to increase sexual pleasure or performance by maintaining an erection for a longer period,and a variety of metallic and non-metallic objects are used.On the other hand,penile strangulation is a rare urologic emergency that requires prompt evaluation and intervention to prevent long-term complications.The goal of treating penile incarceration is to remove the foreign object as soon as possible.On the other hand,removal can be very challenging,and often requires resourcefulness and a multidisciplinary approach.CASE SUMMARY A 47-year-old man who has sex with men was transferred to our hospital for persistent phallodynia and scrotal pain,accompanying swelling due to strangulation by stainless steel rings.His medical history included acquired immunodeficiency syndrome.One day prior,he had put three stainless steel rings on his penis and scrotum before sexual intercourse.After sexual intercourse,he was unable to remove them,due to swelling of his penis and scrotum.The swelling persisted,and he felt pain in the affected area the next day,then he was transferred to our hospital by ambulance.The emergency department found that his penis and scrotum were markedly engorged and swollen.We established a diagnosis of penile and scrotal strangulation by stainless steel rings.We unsuccessfully attempted to cut the rings using a cutter,then requested a rescue team via emergency medical service.They cut through each ring in two places,using an electric-powered angle grinder,and successfully removed all of the pieces.Finally,he was discharged and went home.CONCLUSION We report the first case of penile and scrotal strangulation by stainless steel rings in an human immunodeficiency virus positive person.

MATRICES OVER A REDUCED RING AS SUMS OF THREE TRIPOTENTS

In this paper,we study reduced rings in which every element is a sum of three tripotents that commute,and determine the integral domains over which every n£n matrix is a sum of three tripotents.It is proved that for an integral domain R,every matrix in M_(n)(R)is a sum of three tripotents if and only if R■Zp with p=2,3,5 or 7.

An Introduction to the Theory of Matrix Near-Rings

Matrix rings are prominent in abstract algebra. In this paper we give an overview of the theory of matrix near-rings. A near-ring differs from a ring in that it does not need to be abelian and one of the distributive laws does not hold in general. We introduce two ways in which matrix near-rings can be defined and discuss the structure of each. One is as given by Beildeman and the other is as defined by Meldrum. Beildeman defined his matrix near-rings as normal arrays under the operation of matrix multiplication and addition. He showed that we have a matrix near-ring over a near-ring if, and only if, it is a ring. In this case it is not possible to obtain a matrix near-ring from a proper near-ring. Later, in 1986, Meldrum and van der Walt defined matrix near-rings over a near-ring as mappings from the direct sum of n copies of the additive group of the near-ring to itself. In this case it can be shown that a proper near-ring is obtained. We prove several properties, introduce some special matrices and show that a matrix notation can be introduced to make calculations easier, provided that n is small.

Dynamics of a rotating ring-stiffened sandwich conical shell with an auxetic honeycomb core

The free vibration analysis of a rotating sandwich conical shell with a reentrant auxetic honeycomb core and homogenous isotropic face layers reinforced with a ring support is studied.The shell is modeled utilizing the first-order shear deformation theory(FSDT)incorporating the relative,centripetal,and Coriolis accelerations alongside the initial hoop tension created by the rotation.The governing equations,compatibility conditions,and boundary conditions are attained using Hamilton’s principle.Utilizing trigonometric functions,an analytical solution is derived in the circumferential direction,and a numerical one is presented in the meridional direction via the differential quadrature method(DQM).The effects of various factors on the critical rotational speeds and forward and backward frequencies of the shell are studied.The present work is the first theoretical work regarding the dynamic analysis of a rotating sandwich conical shell with an auxetic honeycomb core strengthened with a ring support.

Analysis and optimization of stamping and forming process of bearing outer ring

To address the common issues of wrinkling,tearing,and uneven wall thickness in the actual sheet metal stamp-ing process of the outer ring of needle roller bearings,this study analyzes critical technical indicators such asforming limits,thickness distribution,and principal strains in the forming process in detail.Three-dimensionalmodels of the concave and convex dies were constructed.The effects of different process parameters,includingstamping speed,edge pressure,sheet metal thickness,and friction coefficient,on the quality of the forming partswere investigated by varying these parameters.Subsequently,the orthogonal experimental method was used todetermine an optimal experimental group from multiple sets of experiments.It was found that under the processparameters of a stamping speed of 3000 mm/s,edge pressure of 2000 N,sheet metal thickness of 0.9 mm,andfriction coefficient of 0.125,the forming quality of the outer ring of the bearing is ideal.

Climate warming is significantly influenced by rising summer maximum temperatures: insights from tree-ring evidence of the Western Tianshan Mountains, China

As one of the regions most affected by global cli-mate warming,the Tianshan mountains has experienced sev-eral ecological crises,including retreating glaciers and water deficits.Climate warming in these mountains is considered mainly to be caused by increases in minimum temperatures and winter temperatures,while the influence of maximum temperatures is unclear.In this study,a 300-year tree-ring chronology developed from the Western Tianshan Moun-tains was used to reconstruct the summer(June-August)maximum temperature(T_(max6-8))variations from 1718 to 2017.The reconstruction explained 53.1% of the variance in the observed T_(max6-8).Over the past 300 years,the T_(max6-8)reconstruction showed clear interannual and decadal vari-abilities.There was a significant warming trend(0.18°C/decade)after the 1950s,which was close to the increasing rates of the minimum and mean temperatures.The increase in maximum temperature was also present over the whole Tianshan mountains and its impact on climate warming has increased.The T_(max6-8) variations in the Western Tianshan mountains were influenced by frequent volcanic eruptions combined with the influence of solar activity and the sum-mer North Atlantic Oscillation.This study reveals that cli-mate warming is significantly influenced by the increase in maximum temperatures and clarifies possible driving mech-anisms of temperature variations in the Western Tianshan mountains which should aid climate predictions.

Dynamics of perinuclear actin ring regulating nuclear morphology

Cells are capable of sensing and responding to the extracellular mechanical microenvironment via the actin skeleton.In vivo,tissues are frequently subject to mechanical forces,such as the rapid and significant shear flow encountered by vascular endothelial cells.However,the investigations about the transient response of intracellular actin networks under these intense external mechanical forces,their intrinsic mechanisms,and potential implications are very limited.Here,we observe that when cells are subject to the shear flow,an actin ring structure could be rapidly assembled at the periphery of the nucleus.To gain insights into the mechanism underlying this perinuclear actin ring assembly,we develop a computational model of actin dynamics.We demonstrate that this perinuclear actin ring assembly is triggered by the depolymerization of cortical actin,Arp2/3-dependent actin filament polymerization,and myosin-mediated actin network contraction.Furthermore,we discover that the compressive stress generated by the perinuclear actin ring could lead to a reduction in the nuclear spreading area,an increase in the nuclear height,and a decrease in the nuclear volume.The present model thus explains the mechanism of the perinuclear actin ring assembly under external mechanical forces and suggests that the spontaneous contraction of this actin structure can significantly impact nuclear morphology.

The Construction and Analysis of Linear Ring Spaces

This paper proposes the novel algebraic structure of a linear ring space. A linear ring space is an order triad consisting of two rings, and a linear map between the two rings. The definition of quasi-linearity is discussed, in addition to the examination of properties and classifications of linear ring spaces. Particularly, the ring of holomorphic functions on a region of the complex plane is examined, and the manner in which it generates an iterated linear ring space under the complex derivative operator. This notion is then generalized to all rings with nth order linear and surjective operators. Basic operator theory regarding the classifications of linear ring maps is also covered.

Stability assessment of tree ring growth of Pinus armandii Franch in response to climate change based on slope directions at the Lubanling in the Funiu Mountains,China

Global warming will affect growth strategies and how trees will adapt.To compare the response of tree radial growth to climate warming in different slope directions,samples of Pinus armandii Franch were collected and treering chronologies developed on northern and western slopes from the Lubanling in the Funiu Mountains.Correlation analyses showed that two chronologies were mainly limited by temperatures in the previous June–August and the combination of temperatures and moisture in the current May–July.The difference of the climate response to slopes was small but not negligible.Radial growth of the LBL01 site on the northern slope was affected by the combined maximum and minimum temperatures,while that of the LBL02 site was affected by maximum temperatures.With regards to moisture,radial growth of the trees on the north slope was influenced by the relative humidity in the current May–July,while on the western slope,it was affected by the relative humidity in the previous June–August,the current May–July and the precipitation in the current May–July.With the change in climate,the effects of the main limiting factors on growth on different slopes were visible to a certain extent,but the differences in response of trees on different slopes gradually decreased,which might be caused by factors such as different slope directions and the change in diurnal temperature range.These results may provide information for forest protection and ecological construction in this region,and a scientific reference for future climate reconstruction.

Stability assessment of tree ring growth of Pinus armandii Franch in response to climate change based on slope directions at the Lubanling in the Funiu Mountains,China

Global warming will affect growth strategies and how trees will adapt.To compare the response of tree radial growth to climate warming in different slope directions,samples of Pinus armandii Franch were collected and tree-ring chronologies developed on northern and western slopes from the Lubanling in the Funiu Mountains.Correlation analyses showed that two chronologies were mainly limited by temperatures in the previous June-August and the com-bination of temperatures and moisture in the current May-July.The difference of the climate response to slopes was small but not negligible.Radial growth of the LBLO1 site on the northern slope was affected by the combined maximum and minimum temperatures,while that of the LBLO2 site was affected by maximum temperatures.With regards to moisture,radial growth of the trees on the north slope was influenced by the relative humidity in the current May-July,while on the western slope,it was affected by the relative humidity in the previous June-August,the current May-July and the precipitation in the current May-July.With the change in climate,the effects of the main limiting factors on growth on different slopes were visible to a certain extent,but the differences in response of trees on different slopes gradually decreased,which might be caused by factors such as different slope directions and the change in diurnal temperature range.These results may provide information for forest protection and ecological construction in this region,and a scientific reference for future climate reconstruction.

Lateral ring compression test applied to a small caliber steel jacket:Identification of a constitutive model

The evolution of threats and scenarios requires continuous performance improvements of ballistic protections for armed forces.From a modeling point of view,it is necessary to use sufficiently precise material behavior models to accurately describe the phenomena observed during the impact of a projectile on a protective equipment.In this context,the goal of this paper is to characterize the behavior of a small caliber steel jacket by combining experimental and numerical approaches.The experimental method is based on the lateral compression of ring specimens directly machined from the thin and small ammunition.Various speeds and temperatures are considered in a quasi-static regime in order to reveal the strain rate and temperature dependencies of the tested material.The Finite Element Updating Method(FEMU)is used.Experimental results are coupled with an inverse optimization method and a finite element numerical model in order to determine the parameters of a constitutive model representative of the jacket material.Predictions of the present model are verified against experimental results and a parametric study as well as a discussion on the identified material parameters are proposed.The results indicate that the strain hardening parameter can be neglected and the behavior of the thin steel jacket can be described by a modeling without strain hardening sensitivity.