期刊文献+
共找到318篇文章
< 1 2 16 >
每页显示 20 50 100
Evaluation of Source Rock Potential for Hydrocarbon Generation in Shallow Offshore, Lamu Basin, Kenya
1
作者 Dennis Ombati Githiri John Maurice K’Orowe 《Journal of Geoscience and Environment Protection》 2023年第5期60-85,共26页
The ever-increasing demand for oil and gas has driven its exploration in rather extreme conditions. In Lamu offshore, which is hitherto underexplored, most of the wells already drilled turned out dry save for a few we... The ever-increasing demand for oil and gas has driven its exploration in rather extreme conditions. In Lamu offshore, which is hitherto underexplored, most of the wells already drilled turned out dry save for a few wells with hydrocarbon shows despite the promising reservoir properties and related geological structures. This, therefore, necessitated a source rock evaluation study in the area to ascertain the presence and potential of the source rock by integrating the geochemical data analysis and petroleum system modeling. The shallow Lamu offshore source rock quantity, quality, and maturity have been estimated through the determination of the total organic carbon (TOC) average values, Kerogen typing, and Rock-Eval pyrolysis measurements respectively. Geochemical data for Kubwa-1, Mbawa-1, Pomboo-1, and Simba-1 were evaluated for determining the source rock potential for hydrocarbon generation. Petroleum system modeling was applied in evaluating geological conditions necessary for a successful charge within a software that integrated geochemical and petrophysical characterization of the sedimentary formations in conjunction with boundary conditions that include basal heat flow, sediment-water interface temperature, and Paleo-water depth. The average TOC of 0.89 wt % in the study area suggests a fair organic richness which seems higher in the late cretaceous (0.98 wt %) than in the Paleocene (0.81 wt %). Vitrinite reflectance and T<sub>max</sub> values in the study area indicate the possible presence of both mature and immature source rocks. Type III Kerogen was the most dominant Kerogen type, and gas shows are the most frequent hydrocarbon encountered in the Lamu Basin with a few cases registering type II/III and type II. The charge properties (i.e. Temperature, transformation ratio, and Vitrinite reflectance) over geologic time at each of the wells have been estimated and their spatial variation mapped as seen from the burial history and depth curves overlaid with temperature, transformation ratio, and Vitrinite reflectance respectively. From the upper cretaceous maturity maps, the results seem to favor near coastal regions where average TOC is about 1.4 wt %, Vitrinite reflectance is more than 0.5%, transformation ratio is more than 10%, and temperatures range from 80°C to 160°C. The results postulate the absence of a definitive effective source rock with a likelihood of having cases of potential and possible source rocks. Moreover, greater uncertainty rests on the source rock’s presence and viability tending toward the deep offshore. Geochemical analysis and petroleum system modeling for hydrocarbon source rock evaluation improved the understanding of the occurrence of the possible and potential source rocks and processes necessary for hydrocarbon generation. 展开更多
关键词 Geochemical Analysis Petroleum System Modeling Rock-eval Pyrolysis Kerogen Typing Vitrinite Reflectance and Transformation Ratio
下载PDF
热致相分离法制备微孔EVAL中空纤维膜的探索 被引量:10
2
作者 郭行蓬 柳波 +2 位作者 葛昌杰 杜强国 杨玉良 《功能高分子学报》 CAS CSCD 2001年第1期23-26,共4页
比较了羟基含量不同的两种乙烯 -醋酸乙烯酯共聚物 (EVA)的醇解产物和聚乙二醇组成的两元体系的相图的差异 ,在此基础上 ,以聚乙二醇为稀释剂 ,采用了热致相分离方法制备了微孔EVA的醇解产物中空纤维膜。结果表明纺丝时的冷却水浴温度... 比较了羟基含量不同的两种乙烯 -醋酸乙烯酯共聚物 (EVA)的醇解产物和聚乙二醇组成的两元体系的相图的差异 ,在此基础上 ,以聚乙二醇为稀释剂 ,采用了热致相分离方法制备了微孔EVA的醇解产物中空纤维膜。结果表明纺丝时的冷却水浴温度、稀释剂的抽提温度以及EVA的醇解产物与聚乙二醇的比例对微孔中空纤维的透气性有明显的影响。 展开更多
关键词 热致相分离 微孔中空纤维膜 eval 乙烯-醋酸乙烯酯共聚物 透气性 制备
下载PDF
等离子体预处理对316L不锈钢-EVAL界面结合强度的影响 被引量:2
3
作者 袁媛 尹民 +1 位作者 尹志岚 刘昌胜 《中国生物医学工程学报》 CAS CSCD 北大核心 2006年第1期95-99,105,共6页
研究了Ar、N2及Ar+N2等离子体预处理对316L不锈钢与其表面EVAL涂层之间结合强度的影响。采用全反射FTIR、AFM测试研究了等离子体预处理前后316L不锈钢表面物化状态的变化;利用X-光电子能谱研究了316L不锈钢与EVAL涂层之间的界面反应。... 研究了Ar、N2及Ar+N2等离子体预处理对316L不锈钢与其表面EVAL涂层之间结合强度的影响。采用全反射FTIR、AFM测试研究了等离子体预处理前后316L不锈钢表面物化状态的变化;利用X-光电子能谱研究了316L不锈钢与EVAL涂层之间的界面反应。研究结果表明:Ar、N2及Ar+N2等离子体预处理后,316L不锈钢与EVAL涂层之间的结合强度分别高达0.92MPa、1.2MPa、1.5MPa(未经处理的试样为0.15MPa)。全反射FTIR和AFM分析结果表明Ar、N2等离子体均对基体表面有较好的清洗作用,Ar等离子体对基体表面具有较强的轰击、刻蚀作用。XPS测试表明EVAL在经Ar等离子体处理的基体表面仅以物理吸附状态存在,推测与N2等离子体处理的基体之间形成了metal-N-O形式的氢键结合。 展开更多
关键词 RF等离子体 316L不锈钢 eval 结合强度
下载PDF
MAH-g-PP对PP/EVAL共混体系的增容作用 被引量:2
4
作者 卢秀萍 韩英素 《中国塑料》 CAS CSCD 北大核心 1999年第12期24-28,共5页
系统研究了不同组成及配比的马来酸酐接枝聚丙烯(MAH-g-PP)及其用量对聚丙烯(PP)与乙烯-乙烯醇共聚物(EVAL)的共混体系(PP/EVAL)力学性能的影响,并借用Brabender塑化仪测试了PP/EVAL/MAH-g-PP共混体系的加工性能。结果... 系统研究了不同组成及配比的马来酸酐接枝聚丙烯(MAH-g-PP)及其用量对聚丙烯(PP)与乙烯-乙烯醇共聚物(EVAL)的共混体系(PP/EVAL)力学性能的影响,并借用Brabender塑化仪测试了PP/EVAL/MAH-g-PP共混体系的加工性能。结果表明,MAH-g-PP接枝物对PP/EVAL共混体系有较好的增容作用,适量加入,可使PP/EVAL共混体系的力学性能明显提高,而加工性能基本不变。 展开更多
关键词 聚丙烯 eval 共混体系 力学性 MAH-g 接枝共聚
下载PDF
EVAL接枝HEMA的动力学研究 被引量:1
5
作者 徐铜文 刘宁 《合肥工业大学学报(自然科学版)》 CAS CSCD 1995年第3期72-78,共7页
本文研究了甲基丙烯酸β羟乙基酯(HEMA)由(Ce^(4+)引发在乙烯-乙烯醇共聚物(EVAL)膜的接枝聚合,建立了接枝聚合动力学方程,研究了单体的溶解特住和扩散特性,结果表明:化学和扩散因素是接枝聚合的主要影响因素.
关键词 接枝聚合 接枝动力学 eval HMEA
下载PDF
Web通用报表系统模型和W3Eval改进算法的研究 被引量:1
6
作者 王舜燕 朱方胜 《武汉理工大学学报(信息与管理工程版)》 CAS 2005年第2期165-167,共3页
分析了Web通用报表系统的需求,并借鉴现有报表系统的解决方案,结合基于Web的人事管理系统项目,描述了一个通用报表的系统模型。此模型基于JSP引擎,利用JAVA技术实现了平台、数据库的无关性。在报表公式计算问题上,引入了W3Eval算法,并... 分析了Web通用报表系统的需求,并借鉴现有报表系统的解决方案,结合基于Web的人事管理系统项目,描述了一个通用报表的系统模型。此模型基于JSP引擎,利用JAVA技术实现了平台、数据库的无关性。在报表公式计算问题上,引入了W3Eval算法,并在此基础上进行了改进,加入新的计算对象和数据填充接口,以适应报表系统的需要。 展开更多
关键词 WEB 通用报表 W3eval
下载PDF
EVAL-高阻气性共聚物 被引量:5
7
作者 黄兴山 《化工时刊》 CAS 2001年第11期4-8,共5页
介绍了乙烯—乙烯醇(EVAL)共聚物的制法、性能特点以及EVAL和其他塑料阻气性的比较;还讨论了EVAL再生利用的可能性。
关键词 乙烯-乙烯醇 eval 共聚物 阻气性 再生利用
下载PDF
Quick Evaluation of Present-Day Low-Total Organic Carbon Carbonate Source Rocks from Rock-Eval Data: Middle–Upper Ordovician in the Tabei Uplift, Tarim Basin 被引量:4
8
作者 CHEN Junqing PANG Xiongqi +2 位作者 YANG Haljun PANG Hong PANG Bo 《Acta Geologica Sinica(English Edition)》 CAS CSCD 2018年第4期1558-1573,共16页
Previous studies have postulated the contribution of present-day low-total organic carbon (TOC) marine carbonate source rocks to oil accumulations in the Tabei Uplift, Tarim Basin, China. However, not all present-da... Previous studies have postulated the contribution of present-day low-total organic carbon (TOC) marine carbonate source rocks to oil accumulations in the Tabei Uplift, Tarim Basin, China. However, not all present-day low-TOC carbonates have generated and expelled hydrocarbons; therefore, to distinguish the source rocks that have already expelled sufficient hydrocarbons from those not expelled hydrocarbons, is crucial in source rock evaluation and resource assessment in the Tabei Uplift. Mass balance can be used to identify modern low-TOC carbonates resulting from hydrocarbon expulsion. However, the process is quite complicated, requiring many parameters and coefficients and thus also a massive data source. In this paper, we provide a quick and cost effective method for identifying carbonate source rock with present-day low TOC, using widely available Rock-Eval data. First, we identify present-day low-TOC carbonate source rocks in typical wells according to the mass balance approach. Second, we build an optimal model to evaluate source rocks from the analysis of the rocks' characteristics and their influencing factors, reported as positive or negative values of a dimensionless index of Rock-Eval data (IR). Positive IR corresponds to those samples which have expelled hydrocarbons. The optimal model optimizes complicated calculations and simulation processes; thus it could be widely applicable and competitive in the evaluation of present-day low TOC carbonates. By applying the model to the Rock-Eval dataset of the Tabei Uplift, we identify present-day iow-TOC carbonate source rocks and primarily evaluate the contribution equivalent of 11.87×10^9 t oil. 展开更多
关键词 present-day low-TOC carbonate source rocks quick evaluation model ROCK-eval TabeiUplift
下载PDF
TEOS交联EVAL膜的制备及其油水分离性能
9
作者 白云翔 吴国梁 +3 位作者 梁乐楠 张春芳 顾瑾 孙余凭 《化工新型材料》 CAS CSCD 北大核心 2014年第6期59-61,95,共4页
用四乙氧基硅烷(TEOS)对聚(乙烯-乙烯醇)(EVAL)进行交联,通过浸没沉淀法制备了交联EVAL膜,研究了不同TEOS添加量对膜的热性能、断面形貌、机械强度及油水分离性能的影响。结果表明:随着TEOS添加量的增加,EVAL膜的玻璃化转变温度上升,熔... 用四乙氧基硅烷(TEOS)对聚(乙烯-乙烯醇)(EVAL)进行交联,通过浸没沉淀法制备了交联EVAL膜,研究了不同TEOS添加量对膜的热性能、断面形貌、机械强度及油水分离性能的影响。结果表明:随着TEOS添加量的增加,EVAL膜的玻璃化转变温度上升,熔点和结晶度下降。膜内的交联结构使膜的机械强度得到明显改善,当TEOS添加量为0.87%时,交联EVAL膜的拉伸强度和断裂伸长率分别为纯EVAL膜的4.4倍和3.1倍。随着TEOS添加量的增加,膜的水通量先减小后增加,而截留率则呈相反的变化趋势;提高油相浓度,交联EVAL膜的截留率可达99.15%,表明该膜适用于较高浓度下的油水分离过程。 展开更多
关键词 TEOS eval 交联膜 油水分离
下载PDF
316L不锈钢支架表面EVAL涂层的制备及性能研究
10
作者 马春阳 朱永永 +1 位作者 吴飞飞 夏法锋 《功能材料》 EI CAS CSCD 北大核心 2014年第13期13056-13058,共3页
采用超声-喷涂沉积的方法,在316L不锈钢表面制得聚乙烯-乙烯醇涂层。利用原子力显微镜、接触角测量仪及扫描电镜对涂层表面形貌及性能进行研究。结果表明,316L不锈钢基体、S-EVAL涂层和USEVAL涂层的表面粗糙度Ra分别为123.677,14.994和2... 采用超声-喷涂沉积的方法,在316L不锈钢表面制得聚乙烯-乙烯醇涂层。利用原子力显微镜、接触角测量仪及扫描电镜对涂层表面形貌及性能进行研究。结果表明,316L不锈钢基体、S-EVAL涂层和USEVAL涂层的表面粗糙度Ra分别为123.677,14.994和2.830 nm。S-EVAL涂层和US-EVAL涂层表面接触角分别为75.6和74.3°,均小于316L不锈钢基体接触角。超声-喷涂沉积US-EVAL涂层血小板粘附量最少。 展开更多
关键词 超声G喷涂沉积 316L不锈钢 eval涂层
下载PDF
A New Method for Hydrocarbon Loss Recovering of Rock-Eval Pyrolysis 被引量:1
11
作者 吴欣松 王延斌 邹小勇 《Journal of China University of Mining and Technology》 2004年第2期200-203,共4页
How to accurately recover the hydrocarbon loss is a crucial step in reservoir evaluation by Rock-Eval pyrolysis. However, it is very difficult to determine the recovering coefficients because there are numerous factor... How to accurately recover the hydrocarbon loss is a crucial step in reservoir evaluation by Rock-Eval pyrolysis. However, it is very difficult to determine the recovering coefficients because there are numerous factors causing the hydrocarbon loss. Aiming at this problem, a new method named critical point analysis is put forward in this paper. The first step of the method is to find the critical point by drawing the scatterplot of hydrocarbon contents versus the ratio of the light component of with the heavy component of;And the second step is to calculate the recovering coefficient by contrasting the pyrolysis parameters at the critical point of different sample types. This method is not only been explained reasonably theoretically,but also has got a good application effect in Huanghua depression. 展开更多
关键词 GEOCHEMISTRY RESERVOIR evaluation ROCK-eval PYROLYSIS
下载PDF
Rock-Eval热分解法及其在土壤有机碳研究中的应用
12
作者 张延 高燕 +5 位作者 张旸 Gregorich Edward 李秀军 陈学文 张士秀 梁爱珍 《土壤与作物》 2022年第3期282-289,共8页
土壤有机碳的稳定性影响土壤固碳潜力,如何提取土壤活性及稳定性碳组分用以定量表征土壤有机碳稳定性,是土壤固碳研究领域的关键科学问题。当前,提取土壤有机碳活性及稳定性组分的方法多样,包括物理、化学及生物手段,导致结果难以比较,... 土壤有机碳的稳定性影响土壤固碳潜力,如何提取土壤活性及稳定性碳组分用以定量表征土壤有机碳稳定性,是土壤固碳研究领域的关键科学问题。当前,提取土壤有机碳活性及稳定性组分的方法多样,包括物理、化学及生物手段,导致结果难以比较,同时存在耗时长、成本高及操作步骤繁琐等缺点。所以,亟需一种高效、可信度高且应用广泛的测定方法。对比分析不同热分解技术的优缺点,包括热裂解气相-质谱联用测定技术、热重分析技术、差示扫描量热分析技术及Rock-Eval(RE)热分解方法,普遍认为RE方法操作简单、耗时短、成本低、结果易于分析,可信度较高,可以很好地表征土壤有机碳稳定性,有利于土壤有机碳研究的横向对比。本文通过Citespace软件综述了RE方法在土壤学和有机碳研究中发展过程,梳理了其应用现状及进展。提出RE方法有助于通过建立不同土地利用方式、气候带以及不同土壤质地间活性及稳定性碳库的比较网络体系,完善我国土壤碳库监测系统。 展开更多
关键词 土壤有机碳 热分解 ROCK-eval 活性及稳定性碳
下载PDF
Designlab Eval8.0在船舶电器维修中的应用
13
作者 信毓昌 王维刚 《中国修船》 北大核心 2000年第4期35-36,共2页
介绍了美国ORCAD公司的DesignlabEval 8.0软件的基本功能 ,叙述了使用该软件辅助船舶电器维修的方法 ,并以稳压电源为例 ,详细说明判断故障的步骤。
关键词 船舶电器 故障判断 电路分析 Designlab eval8 0
下载PDF
不同亲水性EVAL微孔膜的制备与表征 被引量:2
14
作者 孟莎莎 张玉忠 +2 位作者 林立刚 丁晓莉 李泓 《天津工业大学学报》 CAS 北大核心 2011年第1期5-7,11,共4页
以4种不同乙烯基含量的乙烯-乙烯醇共聚物(EVAL)为原料,用相转化法制备了亲水性微孔膜,研究乙烯基含量对膜的结构和性能的影响,并考察膜的抗污染性能.结果表明:随着乙烯基含量的降低,材料中的羟基含量增多,膜的接触角降低,亲水性增强,... 以4种不同乙烯基含量的乙烯-乙烯醇共聚物(EVAL)为原料,用相转化法制备了亲水性微孔膜,研究乙烯基含量对膜的结构和性能的影响,并考察膜的抗污染性能.结果表明:随着乙烯基含量的降低,材料中的羟基含量增多,膜的接触角降低,亲水性增强,纯水通量增大;膜的场发射扫描电子显微镜(FESEM)照片表明,膜表面开孔密集而均匀;EVAL膜与PES膜的通量衰减对比实验表明,EVAL微孔膜的抗污染能力较好,结果与膜的亲水性分析一致. 展开更多
关键词 eval 亲水性微孔膜 抗污染
下载PDF
大孔强酸性离子交换树脂填充EVAL中空纤维膜吸附剂对牛血红蛋白的吸附性能 被引量:2
15
作者 张凤莉 张玉忠 +1 位作者 李泓 陈玲 《天津工业大学学报》 CAS 北大核心 2009年第2期10-13,共4页
以亲水性的乙烯-乙烯醇共聚物(EVAL)为中空纤维膜吸附剂的基质材料,以粉末型大孔强酸性阳离子交换树脂D061为功能性颗粒.采用干-湿法制备了不同填充量树脂填充EVAL中空纤维膜吸附剂,研究了这种吸附剂对模型物蛋白质牛血红蛋白(Hb... 以亲水性的乙烯-乙烯醇共聚物(EVAL)为中空纤维膜吸附剂的基质材料,以粉末型大孔强酸性阳离子交换树脂D061为功能性颗粒.采用干-湿法制备了不同填充量树脂填充EVAL中空纤维膜吸附剂,研究了这种吸附剂对模型物蛋白质牛血红蛋白(Hb)的吸附性能,考察了树脂填充量、蛋白质缓冲溶液的pH值和吸附时间对蛋白质静态吸附性能的影响.结果表明.阳离子树脂D061填充EVAL中空纤维膜吸附剂对蛋白质具有较大的静态吸附容量,随树脂的填充量增加膜吸附剂对Hb的吸附容量增加;当缓冲溶液的pH值低于Hb的等电点(6.8~7.1)时中空纤维膜吸附剂对蛋白质的吸附量较大,而当缓冲溶液的pH值高于Hb的等电点时膜吸附剂对蛋白质的吸附量较小:当树脂填充量为65%,并且缓冲溶液的pH值为2.0时树脂填充中空纤维膜吸附剂对Hb的静态吸附量可达到54.84mg/g. 展开更多
关键词 乙烯-乙烯醇共聚物(eval) 大孔型离子交换树脂 中空纤维膜吸附剂 牛血红蛋白 静态吸附量
下载PDF
阳离子树脂填充EVAL中空纤维膜吸附剂对牛血清/牛血红蛋白质混合物的分离性能 被引量:1
16
作者 校迎军 张玉忠 李泓 《天津工业大学学报》 CAS 北大核心 2010年第4期5-9,共5页
以亲水性乙烯-乙烯醇共聚物(EVAL)为膜吸附剂基质材料,阳离子树脂D061为功能树脂,采用相转换法制备树脂填充EVAL中空纤维膜吸附剂.采用连续循环膜吸附工艺研究了这种膜吸附剂对蛋白质混合物的吸附性能.结果表明:D061树脂填充EVAL中空纤... 以亲水性乙烯-乙烯醇共聚物(EVAL)为膜吸附剂基质材料,阳离子树脂D061为功能树脂,采用相转换法制备树脂填充EVAL中空纤维膜吸附剂.采用连续循环膜吸附工艺研究了这种膜吸附剂对蛋白质混合物的吸附性能.结果表明:D061树脂填充EVAL中空纤维膜吸附剂对牛血清蛋白(BSA)、牛血红蛋白(Hb)均具有较好的吸附性能,且随着树脂填充量的增加膜吸附剂对蛋白质的吸附容量增加,当树脂填充量为65%时,膜吸附剂对BSA的最大吸附容量达到69.26 mg/g,Hb的最大吸附容量达到45.29 mg/g;pH值对蛋白质的吸附性能影响很大,pH=7.0时,分离系数在3.8左右,能够将BSA、Hb蛋白质混合物进行有效分离. 展开更多
关键词 膜吸附剂 吸附 中空纤维膜 eval 蛋白质分离
下载PDF
TPPS在EVAL膜表面的吸附及超分子自组装
17
作者 张玉新 赵莉芝 +3 位作者 张玉忠 叶卉 刘满满 李泓 《膜科学与技术》 CAS CSCD 北大核心 2015年第1期1-8,共8页
TPPS(四-(4-磺酸基苯基)卟啉)在一定条件下可以自组装形成超分子聚集体.将TPPS超分子聚集体与膜材料结合,可制备一种超分子负载膜.本实验以EVAL(乙烯-乙烯醇共聚物)为基膜,以DMAEMA(甲基丙烯酸N,N-二甲氨基乙酯)为单体,采用紫外接枝的... TPPS(四-(4-磺酸基苯基)卟啉)在一定条件下可以自组装形成超分子聚集体.将TPPS超分子聚集体与膜材料结合,可制备一种超分子负载膜.本实验以EVAL(乙烯-乙烯醇共聚物)为基膜,以DMAEMA(甲基丙烯酸N,N-二甲氨基乙酯)为单体,采用紫外接枝的方法制备了EVAL-g-PDMAEMA接枝膜,利用氢键、静电作用等非共价键作用将TPPS负载于EVAL原膜及EVAL-g-PDMAEMA接枝膜上.研究了pH值、离子强度、接枝率对吸附过程的影响及等温吸附机理.结果表明,当pH=3.6时接枝膜对TPPS的吸附容量最大,pH=7时,原膜对TPPS的吸附容量最大;离子强度的增大不利于膜对TPPS的吸附;EVAL-gPDMAEMA接枝率的增大,接枝膜对TPPS的吸附容量也随之增大;Langmuir吸附等温方程可以对吸附过程进行很好的描述.改变EVAL/TPPS负载膜的pH条件,利用紫外漫反射光谱表征膜表面TPPS的聚集状态,考察不同DMAEMA接枝率的负载膜实现超分子结构的条件.实验结果显示,当pH<1时,TPPS在接枝膜和原膜表面均形成超分子J-聚集体,而pH>1时,TPPS仅在接枝膜表面形成H-聚集;并且DMAEMA的接枝率越高,越有利于TPPS聚集体的形成,进而有利于超分子负载膜的构筑. 展开更多
关键词 TPPS DMAEMA eval
下载PDF
经静脉途径应用Eval胶联合弹簧圈栓塞治疗海绵窦区硬脑膜动静脉瘘 被引量:2
18
作者 黄磊 张登 +2 位作者 李响 韦金豆 吕忠中 《中国临床神经外科杂志》 2021年第12期900-903,共4页
目的探讨经静脉入路应用Eval胶联合弹簧圈栓塞治疗海绵窦区硬脑膜动静脉瘘(CS-DAVF)的安全性和有效性。方法回顾性分析2015年1月至2020年10月收治的17例CS-DAVF的临床资料。所有病人均经静脉入路应用Eval胶联合弹簧圈栓塞治疗。结果术... 目的探讨经静脉入路应用Eval胶联合弹簧圈栓塞治疗海绵窦区硬脑膜动静脉瘘(CS-DAVF)的安全性和有效性。方法回顾性分析2015年1月至2020年10月收治的17例CS-DAVF的临床资料。所有病人均经静脉入路应用Eval胶联合弹簧圈栓塞治疗。结果术后即刻DSA显示,17例CS-DAVF均完全栓塞。术后早期出现治疗相关并发症5例(29.41%),其中头痛2例,动眼神经麻痹2例,外展神经麻痹1例。术后随访3~24个月,平均7.3个月;改良Rankin量表评分0分16例,1分1例(遗留动眼神经麻痹)。结论经静脉入路使用Eval胶联合弹簧圈栓塞治疗CS-DAVF,效果良好,治愈率高,并发症少。 展开更多
关键词 海绵窦区硬脑膜动静脉瘘 血管内栓塞 经静脉入路 eval 弹簧圈 疗效
下载PDF
Research on the Performance Evaluation and Advancing Path of Henan Agricultural Products E-marketing 被引量:1
19
作者 Jingqiang PAN 《Asian Agricultural Research》 2013年第3期109-112,共4页
Given that the traditional marketing management of agricultural products has been unable to meet the diversified demands of market, and the network has been applied to the marketing field of agricultural products,the ... Given that the traditional marketing management of agricultural products has been unable to meet the diversified demands of market, and the network has been applied to the marketing field of agricultural products,the research on the performance evaluation and advancing path of Henan agricultural products E-marketing is more important than before. Based on current problems of Henan agricultural products E-marketing,a system of performance evaluation is established,which covers website building and maintenance and other four first-class indexes as well as profit ratio of sales and other thirteen second-class indexes,and then the system is evaluated by comprehensive evaluation method. Meanwhile,it is explored to discuss how to further advance Henan agricultural products E-marketing. 展开更多
关键词 AGRICULTURAL PRODUCTS E-MARKETING Performance eval
下载PDF
Petroleum Source-Rock Evaluation and Hydrocarbon Potential in Montney Formation Unconventional Reservoir, Northeastern British Columbia, Canada 被引量:1
20
作者 Edwin I. Egbobawaye 《Natural Resources》 2017年第11期716-756,共41页
Source-rock characteristics of Lower Triassic Montney Formation presented in this study shows the total organic carbon (TOC) richness, thermal maturity, hydrocarbon generation, geographical distribution of TOC and the... Source-rock characteristics of Lower Triassic Montney Formation presented in this study shows the total organic carbon (TOC) richness, thermal maturity, hydrocarbon generation, geographical distribution of TOC and thermal maturity (Tmax) in Fort St. John study area (T86N, R23W and T74N, R13W) and its environs in northeastern British Columbia, Western Canada Sedimentary Basin (WCSB). TOC richness in Montney Formation within the study area is grouped into three categories: low TOC ( 3.5 wt%), and high TOC (>3.5 wt% %). Thermal maturity of the Montney Formation source-rock indicates that >90% of the analyzed samples are thermally mature, and mainly within gas generating window (wet gas, condensate gas, and dry gas), and comprises mixed Type II/III (oil/gas prone kerogen), and Type IV kerogen (gas prone). Analyses of Rock-Eval parameters (TOC, S2, Tmax, HI, OI and PI) obtained from 81 samples in 11 wells that penetrated the Montney Formation in the subsurface of northeastern British Columbia were used to map source rock quality across the study area. Based on total organic carbon (TOC) content mapping, geographical distribution of thermal maturity (Tmax) data mapping, including evaluation and interpretation of Rock-Eval parameters in the study area, the Montney Formation kerogen is indicative of a pervasively matured petroleum system in the study area. 展开更多
关键词 PETROLEUM Source-Rock Rock-eval Oil and Gas Kerogen Vitrinite Reflectance HYDROCARBON RESERVOIR Montney FORMATION Geology TOC Tmax Pyrolysis HYDROCARBON Generation British Columbia Western Canada Sedimentary Basin WCSB
下载PDF
上一页 1 2 16 下一页 到第
使用帮助 返回顶部