Previous studies suggest that tidal friction gives rise to the secular deceleration of the Earth rotation by a quantity of about 2.25 ms/cy. Here we just consider additional contributions to the secular Earth rotation...Previous studies suggest that tidal friction gives rise to the secular deceleration of the Earth rotation by a quantity of about 2.25 ms/cy. Here we just consider additional contributions to the secular Earth rotation deceleration. Atmospheric solar semi-diurnal tide has a small amplitude and certain amount of phase lead. This periodic global air-mass excess distribution exerts a quasi-constant torque to accelerate the Earth's spin rotation. Using an updated atmospheric tide model, we re-estimate the amounts of this atmospheric acceleration torque and corresponding energy input, of which the associated change rate in LOD(length of day) is-0.1 ms/cy. In another aspect, evidences from space-geodesy and sea level rise observations suggest that Earth expands at a rate of 0.35 mm/yr in recent decades, which gives rise to the increase of LOD at rate of 1.0 ms/cy. Hence, if the previous estimate due to the tidal friction is correct, the secular Earth rotation deceleration due to tidal friction and Earth expansion should be 3.15 ms/cy.展开更多
A modern view of the properties of chemical elements has confirmed the theory of the hot origin of the Earth. The next step in developing this theory was the hypothesis of the initial hydride Earth. In this work, we a...A modern view of the properties of chemical elements has confirmed the theory of the hot origin of the Earth. The next step in developing this theory was the hypothesis of the initial hydride Earth. In this work, we attempted to find additional evidence for this hypothesis and show additional effects that flow from it. The effect of the physical properties of atoms and ions on their behavior during the formation of the Earth was studied. The maximum contribution to the distribution of elements was made by those elements whose content in the original protoplanets of the disk was the maximum. Correlation dependence is obtained, which allows one to calculate the distribution of elements in the protoplanetary disk. It was shown that hydrogen was the main element in the proto substance located in the zone of the Earth’s formation. In this case, various chemical compounds formed, most represented by hydrogen compounds—hydrides. Since the pressure inside the Earth is 375 GPa, this factor forces the chemical compounds to adopt stoichiometry and structure that would not be available in atmospheric conditions. It is shown that many chemical elements at high pressure in a hydrogen medium form simple hydrides and super hydrides—polyhydrides with high hydrogen content. Pressure leads to a higher density of matter inside the planet. Given the possibility of forming polyhydrides, there is the possibility of binding the initially available hydrogen in an amount that can reach 49.3 mole%. Young Earth could contain about 10.7 mass% of hydrogen in hydrides, polyhydrides, and adsorbed form is almost twice higher than previous estimates. This fact additionally confirms the theory of the original hydride Earth. In hydrides, the occurrence of the phenomenon of superconductivity was discovered. Polyhydrides were shown as potential superconductors with a high critical temperature above 200 K. We, based on these data, hypothesized the presence of superconducting properties in the Earth’s core, which explains the presence of a magnetic field in the Earth, as well as the unevenness and instability of this field and the possibility of migration of the Earth’s poles. The fact that the Earth has a hydroid core causes its change in time due to the instability of hydrides. Arranged several possible models of the destruction of the Earth’s core. The calculations showed that both models give close results. These results give predictions that can be measured. The proposed models also made it possible to estimate the initial size of the Earth. Possible ways of further testing the hypothesis of the initial hydride Earth is shown.展开更多
According to the space-geodetic data recorded at globally distributed stations over solid land spanning a period of more than 20-years under the International Terrestrial Reference Frame 2008,our previous estimate of ...According to the space-geodetic data recorded at globally distributed stations over solid land spanning a period of more than 20-years under the International Terrestrial Reference Frame 2008,our previous estimate of the average-weighted vertical variation of the Earth's solid surface suggests that the Earth's solid part is expanding at a rate of 0.24 ± 0.05 mm/a in recent two decades.In another aspect,the satellite altimetry observations spanning recent two decades demonstrate the sea level rise(SLR) rate 3.2 ± 0.4 mm/a,of which1.8 ± 0.5 mm/a is contributed by the ice melting over land.This study shows that the oceanic thermal expansion is 1.0 ± 0.1 mm/a due to the temperature increase in recent half century,which coincides with the estimate provided by previous authors.The SLR observation by altimetry is not balanced by the ice melting and thermal expansion,which is an open problem before this study.However,in this study we infer that the oceanic part of the Earth is expanding at a rate about 0.4 mm/a.Combining the expansion rates of land part and oceanic part,we conclude that the Earth is expanding at a rate of 0.35 ± 0.47 mm/a in recent two decades.If the Earth expands at this rate,then the altimetry-observed SLR can be well explained.展开更多
This paper presents a general solution for active earth pressure acting on a vertical retaining wall with a drainage system along the soil-structure interface. The backfill has a horizontal surface and is composed of ...This paper presents a general solution for active earth pressure acting on a vertical retaining wall with a drainage system along the soil-structure interface. The backfill has a horizontal surface and is composed of cohesionless and fully saturated sand with anisotropic permeability along the vertical and horizontal directions. The extremely unfavourable seepage flow on the back of the retaining wall due to heavy rainfall or other causes will dramatically increase the active earth pressure acting on the retaining walls, increasing the probability of instability. In this paper, an analytical solution to the Laplace differential governing equation is presented for seepage problems considering anisotropic permeability based on Fourier series expansion method. A good correlation is observed between this and the seepage forces along a planar surface generated via finite element analysis. The active earth pressure is calculated using Coulomb's earth pressure theory based on the calculated pore water pressures. The obtained solutions can be degenerated into Coulomb's formula when no seepage exists in the backfill. A parametric study on the influence of the degree of anisotropy in seepage flow on the distribution of active earth pressure behind the wall is conducted by varying ratios of permeability coefficients in the vertical and horizontal directions,showing that anisotropic seepage flow has a prominent impact on active earth pressure distribution. Other factors such as effective internal friction angle of soils and soil/wall friction conditions are also considered.展开更多
La2(Zr0.7Ce0.3)2O7 (LZ7C3) ceramic was synthesized by solid state reaction with La2O3, ZrO2 and CeO2 as starting materials. The synthesis kinetics, phase structure, mass loss and microstructure were studied by the...La2(Zr0.7Ce0.3)2O7 (LZ7C3) ceramic was synthesized by solid state reaction with La2O3, ZrO2 and CeO2 as starting materials. The synthesis kinetics, phase structure, mass loss and microstructure were studied by thermo gravimetric-different thermal analyzer (TG-DTA), X-ray difference (XRD) and scanning electron microscopy (SEM). The thermal conductivity and thermal expansion coefficient were measured by laser-flash method and pushing-rod method, respectively. XRD results showed that LZ7C3 was a mixture of La2Zr2O7 (LZ, pyro- chlore) and La2Ce2O7 (LC, fluorite). The lowest synthesis temperature and time of LZ7C3 were 1400 oC and 5 h. There were no peaks of La2O3 when the powder granularity was about 0.82 μm in the synthesis process. The atom ratio La:Zr:Ce of prepared LZ7C3 powder was very close to 10:7:3 which was the theory value of LZ7C3. The thermal conductivity of LZ7C3 decreased gradually with the temperature increased up to 1200 oC, and was located within 0.79 to 1.02 W/(m·K), which was almost 50% lower than that of LZ, whereas its thermal expansion coefficient was larger and the value was 11.6×10-6 K-1.展开更多
基金partly supported by National 973 Project China(2013CB733305)NSFC(41174011,41210006,41504019)supported by a fund from Korea Astronomy and Space Science Institute(2016 Space Geodesy Project about Atmospheric/Ocean Tidal Effects)
文摘Previous studies suggest that tidal friction gives rise to the secular deceleration of the Earth rotation by a quantity of about 2.25 ms/cy. Here we just consider additional contributions to the secular Earth rotation deceleration. Atmospheric solar semi-diurnal tide has a small amplitude and certain amount of phase lead. This periodic global air-mass excess distribution exerts a quasi-constant torque to accelerate the Earth's spin rotation. Using an updated atmospheric tide model, we re-estimate the amounts of this atmospheric acceleration torque and corresponding energy input, of which the associated change rate in LOD(length of day) is-0.1 ms/cy. In another aspect, evidences from space-geodesy and sea level rise observations suggest that Earth expands at a rate of 0.35 mm/yr in recent decades, which gives rise to the increase of LOD at rate of 1.0 ms/cy. Hence, if the previous estimate due to the tidal friction is correct, the secular Earth rotation deceleration due to tidal friction and Earth expansion should be 3.15 ms/cy.
文摘A modern view of the properties of chemical elements has confirmed the theory of the hot origin of the Earth. The next step in developing this theory was the hypothesis of the initial hydride Earth. In this work, we attempted to find additional evidence for this hypothesis and show additional effects that flow from it. The effect of the physical properties of atoms and ions on their behavior during the formation of the Earth was studied. The maximum contribution to the distribution of elements was made by those elements whose content in the original protoplanets of the disk was the maximum. Correlation dependence is obtained, which allows one to calculate the distribution of elements in the protoplanetary disk. It was shown that hydrogen was the main element in the proto substance located in the zone of the Earth’s formation. In this case, various chemical compounds formed, most represented by hydrogen compounds—hydrides. Since the pressure inside the Earth is 375 GPa, this factor forces the chemical compounds to adopt stoichiometry and structure that would not be available in atmospheric conditions. It is shown that many chemical elements at high pressure in a hydrogen medium form simple hydrides and super hydrides—polyhydrides with high hydrogen content. Pressure leads to a higher density of matter inside the planet. Given the possibility of forming polyhydrides, there is the possibility of binding the initially available hydrogen in an amount that can reach 49.3 mole%. Young Earth could contain about 10.7 mass% of hydrogen in hydrides, polyhydrides, and adsorbed form is almost twice higher than previous estimates. This fact additionally confirms the theory of the original hydride Earth. In hydrides, the occurrence of the phenomenon of superconductivity was discovered. Polyhydrides were shown as potential superconductors with a high critical temperature above 200 K. We, based on these data, hypothesized the presence of superconducting properties in the Earth’s core, which explains the presence of a magnetic field in the Earth, as well as the unevenness and instability of this field and the possibility of migration of the Earth’s poles. The fact that the Earth has a hydroid core causes its change in time due to the instability of hydrides. Arranged several possible models of the destruction of the Earth’s core. The calculations showed that both models give close results. These results give predictions that can be measured. The proposed models also made it possible to estimate the initial size of the Earth. Possible ways of further testing the hypothesis of the initial hydride Earth is shown.
基金supported by National 973 Project China(2013CB733305,2013CB733301)National Natural Science Foundation of China(41174011,41429401,41210006,41128003,41021061)
文摘According to the space-geodetic data recorded at globally distributed stations over solid land spanning a period of more than 20-years under the International Terrestrial Reference Frame 2008,our previous estimate of the average-weighted vertical variation of the Earth's solid surface suggests that the Earth's solid part is expanding at a rate of 0.24 ± 0.05 mm/a in recent two decades.In another aspect,the satellite altimetry observations spanning recent two decades demonstrate the sea level rise(SLR) rate 3.2 ± 0.4 mm/a,of which1.8 ± 0.5 mm/a is contributed by the ice melting over land.This study shows that the oceanic thermal expansion is 1.0 ± 0.1 mm/a due to the temperature increase in recent half century,which coincides with the estimate provided by previous authors.The SLR observation by altimetry is not balanced by the ice melting and thermal expansion,which is an open problem before this study.However,in this study we infer that the oceanic part of the Earth is expanding at a rate about 0.4 mm/a.Combining the expansion rates of land part and oceanic part,we conclude that the Earth is expanding at a rate of 0.35 ± 0.47 mm/a in recent two decades.If the Earth expands at this rate,then the altimetry-observed SLR can be well explained.
基金supported by the National Key R & D program of China (Grant No. 2016YFC0800204)the National Key Basic Research Program of China (Grant No. 2015CB057801)Natural Science Foundation of China (Grant Nos. 51578499 & 51761130078)
文摘This paper presents a general solution for active earth pressure acting on a vertical retaining wall with a drainage system along the soil-structure interface. The backfill has a horizontal surface and is composed of cohesionless and fully saturated sand with anisotropic permeability along the vertical and horizontal directions. The extremely unfavourable seepage flow on the back of the retaining wall due to heavy rainfall or other causes will dramatically increase the active earth pressure acting on the retaining walls, increasing the probability of instability. In this paper, an analytical solution to the Laplace differential governing equation is presented for seepage problems considering anisotropic permeability based on Fourier series expansion method. A good correlation is observed between this and the seepage forces along a planar surface generated via finite element analysis. The active earth pressure is calculated using Coulomb's earth pressure theory based on the calculated pore water pressures. The obtained solutions can be degenerated into Coulomb's formula when no seepage exists in the backfill. A parametric study on the influence of the degree of anisotropy in seepage flow on the distribution of active earth pressure behind the wall is conducted by varying ratios of permeability coefficients in the vertical and horizontal directions,showing that anisotropic seepage flow has a prominent impact on active earth pressure distribution. Other factors such as effective internal friction angle of soils and soil/wall friction conditions are also considered.
基金Project supported by National Basic Research Program of China (973 Program, 613112)
文摘La2(Zr0.7Ce0.3)2O7 (LZ7C3) ceramic was synthesized by solid state reaction with La2O3, ZrO2 and CeO2 as starting materials. The synthesis kinetics, phase structure, mass loss and microstructure were studied by thermo gravimetric-different thermal analyzer (TG-DTA), X-ray difference (XRD) and scanning electron microscopy (SEM). The thermal conductivity and thermal expansion coefficient were measured by laser-flash method and pushing-rod method, respectively. XRD results showed that LZ7C3 was a mixture of La2Zr2O7 (LZ, pyro- chlore) and La2Ce2O7 (LC, fluorite). The lowest synthesis temperature and time of LZ7C3 were 1400 oC and 5 h. There were no peaks of La2O3 when the powder granularity was about 0.82 μm in the synthesis process. The atom ratio La:Zr:Ce of prepared LZ7C3 powder was very close to 10:7:3 which was the theory value of LZ7C3. The thermal conductivity of LZ7C3 decreased gradually with the temperature increased up to 1200 oC, and was located within 0.79 to 1.02 W/(m·K), which was almost 50% lower than that of LZ, whereas its thermal expansion coefficient was larger and the value was 11.6×10-6 K-1.