Dynamic Risk Assessment Index System for Earth-Rock Dam during Construction

During the construction of earth-rock dam,mutual exclusive construction goals such as quality,safety,progress and cost all have influences on each other,with risk factors being everchanging as the construction progresses.Accurate identification of the risk factors,as well as clearing any possible effect that any risk factors might have on the construction project is the key and foundation to our cooperative control of the construction goals.According to the construction planning of earth-rock dam,the hall3 D structure was used to identify the potential changes of risk factors,and the possible means of any risk factors to interfere with the construction goals.The dynamic risk assessment index system is established by deploying the WBS-RBS(work breakdown structurerisk breakdown structure)method,aiming at the construction goals of earth-rock dam.The case study shows that the index system is very effective at risk management of earth-rock dam during construction,and relatively practicable.

Effect of Seismic Permanent Deformation on Safety and Stability of Earth-Rock Dam Slope

In order to study the effect of seismic permanent deformation on the safety and stability of earth-rock dam, the permanent deformation is considered as the non-design permanent load, and the stress-strain hysteresis curve is also considered when the earth is under cyclic load. The research work can make the calculation results of plastic collapse more accurate by including the effect of the post-earthquake degree of plastic deformation on the stability of the earth-rock dam, and the dam safety factor decreases from 2.50 to 1.90 after the magnitude-8 earthquake. Moreover, the research work will also improve the design of the earth-rock dam under abnormal operating conditions.

Study on life-cycle risk management of high earth-rock dam project

Based on advanced computer technology,internet of things(IOT) technology,project management concept and professional technology and combined with the innovative theories,methods and techniques in earlier hydropower projects,the life- cycle risk management system of high earth- rock dam project for Nuozhadu project was developed. The system mainly includes digital dam,three-dimensional design,construction quality monitoring,safety assessment and warning,etc,to integrally manage and analyze the dam design,constructional quality and safety monitoring information. It realized the dynamic updates of the comprehensive information and the safety quality monitoring in the project life cycle,and provided the basic platform for the scientific management of the construction and operation safety of high earth- rock dam. Application in Nuozhadu earth- rock dam showed that construction safety monitoring and warning greatly helped accelerate the construction progress and improve project quality,and provided a new way for the quality safety control of high earth-rock dam.

一种S波段雷达通信电子战多功能宽带DAM的设计

本文创新性地提出了一种S波段多功能宽带DAM,首先介绍了该型DAM的顶层架构设计,接着介绍了各个功能组成模块的设计过程,最后给出了该型DAM的指标实现情况。该型DAM可以分时实现雷达、通信及电子战功能,最大瞬时带宽可达200MHz,支持任意波形产生,在多功能综合射频系统中具有良好的应用前景。

3个李品种(系)芽需冷量的研究及休眠相关DAM基因的表达分析

【目的】探究3个李(Prunus)品种(系)的芽休眠和需冷量的差异及DAM基因表达与芽休眠的关系。【方法】调查统计了3个李品种(系)需冷量与萌芽率,采用生物信息学的方法对李的DAM基因进行鉴定,并用qRT-PCR对3个品种(系)李的DAM基因在芽的不同休眠阶段表达分析。【结果】7.2℃模型、0~7.2℃模型、犹他模型下“晚熟羌脆李”的需冷量均高于‘羌脆李’和‘脆红李’,且3个需冷量统计模型下‘羌脆李’和‘脆红李’的需冷量相同。鉴定了6个DAM基因(Pd DAM1、Pd DAM2、Pd DAM3、Pd DAM4、Pd DAM5、Pd DAM6),但花芽与叶芽内休眠期与内休眠解除期(需冷区间)高表达基因都为DAM5,且在休眠解除期DAM基因的相对表达量均呈下降趋势。【结论】揭示了3个李品种(系)的花芽与叶芽需冷量的差异,筛选出与休眠解除最相关的DAM基因,结果为李芽休眠及熟期调节提供理论依据。

葡萄休眠相关基因DAMs的克隆分析及对单氰胺的响应

DAM基因是真核生物转录因子之一,在木本果树的芽休眠中起着重要的调控作用,且在不同物种间数量不同。以‘水晶’葡萄为试材,于冬芽休眠期间采集枝条后均匀涂抹2.5%单氰胺,在处理后的不同时间采集冬芽,用于克隆VvDAMs基因序列,对其进行生物信息学和荧光定量分析,并测定冬芽激素含量。结果表明,克隆获得的VvDAM1、VvDAM2和VvDAM3基因的开放阅读框的长度分别为690、696、702 bp,分别编码229、231、233个氨基酸和1个终止密码子,相对分子量分别为25.96、26.76、25.99 kD,理论等电点分别为7.71、10.49、9.10;三者的二级结构形式均呈现α-螺旋>无规则卷曲>延伸链的规律;VvDAM1、VvDAM2、VvDAM3氨基酸序列上有一定的同一性,VvDAM1与欧洲李PsDAM1、VvDAM2与樱桃李PcDAM2、VvDAM3与李PsDAM3之间的同源性均达到98%以上;此外,冬芽休眠解除期间,VvDAM 1、VvDAM 2、VvDAM 3基因的表达量逐渐下降,IAA、GA3+4、ZR的含量和GA3+4/ABA逐渐上升,ABA含量和IAA/ZR逐渐下降,单氰胺处理后使其变化提前且幅度增大,从而使芽提前萌发,为葡萄冬芽破眠、早熟栽培等提供理论依据和实践意义。

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people’s lives,properties,and infrastructures.In this study,based on the three-dimensional Reynoldsaveraged Navier-Stokes equations(RANS),the renormalization group(RNG)k-εturbulence model,suspended and bed load transport equations,and the instability discriminant formula of dam breach side slope,and the explicit finite volume method(FVM),a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed.The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams.A model test of the breaches of two cascading landslide dams has been used as the validation case.The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other,and the relative errors of the key breaching parameters,i.e.,the peak breach flow and the time to peak of each dam,are less than±5%.Further,the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures.Three key parameters,i.e.,the distance between the upstream and the downstream dams,the river channel slope,and the downstream dam height,have been used to study the flood amplification effect.The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams,and the downstream dam height.Further,the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope.When the flood caused by the upstream dam failure flows to the downstream dam,it can produce a surge wave that overtops and erodes the dam crest,resulting in a lowering of the dam crest elevation.This has an impact on the failure occurrence time and the peak breach flow of the downstream dam.The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material.Moreover,the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model.In comparisons of the calculated and measured breach hydrographs and final breach morphologies,the relative errors of the key dam breaching parameters are all within±10%,which verify the rationality of the model is applicable to real-world cases.Overall,the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Numerical three-dimensional modeling of earthen dam piping failure

A physically-based numerical three-dimensional earthen dam piping failure model is developed for homogeneous and zoned soil dams.This model is an erosion model,coupled with force/moment equilibrium analyses.Orifice flow and two-dimensional(2D)shallow water equations(SWE)are solved to simulate dam break flows at different breaching stages.Erosion rates of different soils with different construction compaction efforts are calculated using corresponding erosion formulae.The dam's real shape,soil properties,and surrounding area are programmed.Large outer 2D-SWE grids are used to control upstream and downstream hydraulic conditions and control the boundary conditions of orifice flow,and inner 2D-SWE flow is used to scour soil and perform force/moment equilibrium analyses.This model is validated using the European Commission IMPACT(Investigation of Extreme Flood Processes and Uncertainty)Test#5 in Norway,Teton Dam failure in Idaho,USA,and Quail Creek Dike failure in Utah,USA.All calculated peak outflows are within 10%errors of observed values.Simulation results show that,for a V-shaped dam like Teton Dam,a piping breach location at the abutment tends to result in a smaller peak breach outflow than the piping breach location at the dam's center;and if Teton Dam had broken from its center for internal erosion,a peak outflow of 117851 m'/s,which is 81%larger than the peak outflow of 65120 m3/s released from its right abutment,would have been released from Teton Dam.A lower piping inlet elevation tends to cause a faster/earlier piping breach than a higher piping inlet elevation.

Sliding and damming properties of granular debris with different geometric configurations and grain size distributions

Granular debris plays a significant role in determining damming deposit characteristics. An indepth understanding of how variations in grain size distribution(GSD) and geometric configurations impact the behavior of granular debris during the occurrence of granular debris is essential for precise assessment and effective mitigation of landslide hazards in mountainous terrains. This research aims to investigate the impact of GSD and geometric configurations on sliding and damming properties through laboratory experiments. The geometric configurations were categorized into three categories based on the spatial distribution of maximum volume: located at the front(Type Ⅰ), middle(Type Ⅱ), and rear(Type Ⅲ) of the granular debris. Our experimental findings highlight that the sliding and damming processes primarily depend on the interaction among the geometric configuration, grain size, and GSD in granular debris. Different sliding and damming mechanisms across various geometric configurations induce variability in motion parameters and deposition patterns. For Type Ⅰ configurations, the front debris functions as the critical and primary driving component, with energy dissipation primarily occurring through inter-grain interactions. In contrast, Type Ⅱ configurations feature the middle debris as the dominant driving component, experiencing hindrance from the front debris and propulsion from the rear, leading to complex alterations in sliding motion. Here, energy dissipation arises from a combination of inter-grain and grain-substrate interactions. Lastly, in Type Ⅲ configurations, both the middle and rear debris serve as the main driving components, with the rear sliding debris impeded by the front. In this case, energy dissipation predominantly results from grainsubstrate interaction. Moreover, we have quantitatively demonstrated that the inverse grading in damming deposits, where coarse grain moves upward and fine grain moves downward, is primarily caused by grain sorting due to collisions among the grains and between the grain and the base. The impact of grain on the horizontal channel further aids grain sorting and contributes to inverse grading. The proposed classification of three geometric configurations in our study enhances the understanding of damming properties from the view of mechanism, which provides valuable insights for related study about damming granular debris.

Long-Term Performance and Microstructural Characterization of Dam Concrete in the Three Gorges Project

This study investigates the long-term performance of laboratory dam concrete in different curing environments over ten years and the microstructure of 17-year-old laboratory concrete and actual concrete cores drilled from the Three Gorges Dam.The mechanical properties of the laboratory dam concrete,whether cured in natural or standard environments,continued to improve over time.Furthermore,the laboratory dam concrete exhibited good resistance to diffusion and a refined microstructure after 17 years.However,curing and long-term exposure to the local natural environment reduced the frost resistance.Microstructural analyses of the laboratory concrete samples demonstrated that moderate-heat cement and fine fly ash(FA)particles were almost fully hydrated to form compact micro structures consisting of large quantities of homogeneous calcium(alumino)silicate hydrate(C-(A)-S-H)gels and a few crystals.No obvious interfacial transition zones were observed in the microstructure owing to the longterm pozzolanic reaction.This dense and homogenous microstructure was the crucial reason for the excellent long-term performance of the dam concrete.A high FA volume also played a significant role in the microstructural densification and performance growth of dam concrete at a later age.The concrete drilled from the dam surface exhibited a loose microstructure with higher microporosity,indicating that concrete directly exposed to the actual service environment suffered degradation caused by water and wind attacks.In this study,both macro-performance and microstructural analyses revealed that the application of moderate-heat cement and FA resulted in a dense and homogenous microstructure,which ensured the excellent long-term performance of concrete from the Three Gorges Dam after 17 years.Long-term exposure to an actual service environment may lead to microstructural degradation of the concrete surface.Therefore,the retained long-term dam concrete samples need to be further researched to better understand its microstructural evolution and development of its properties.

Health diagnosis of ultrahigh arch dam performance using heterogeneous spatial panel vector model

Currently,more than ten ultrahigh arch dams have been constructed or are being constructed in China.Safety control is essential to long-term operation of these dams.This study employed the flexibility coefficient and plastic complementary energy norm to assess the structural safety of arch dams.A comprehensive analysis was conducted,focusing on differences among conventional methods in characterizing the structural behavior of the Xiaowan arch dam in China.Subsequently,the spatiotemporal characteristics of the measured performance of the Xiaowan dam were explored,including periodicity,convergence,and time-effect characteristics.These findings revealed the governing mechanism of main factors.Furthermore,a heterogeneous spatial panel vector model was developed,considering both common factors and specific factors affecting the safety and performance of arch dams.This model aims to comprehensively illustrate spatial heterogeneity between the entire structure and local regions,introducing a specific effect quantity to characterize local deformation differences.Ultimately,the proposed model was applied to the Xiaowan arch dam,accurately quantifying the spatiotemporal heterogeneity of dam performance.Additionally,the spatiotemporal distri-bution characteristics of environmental load effects on different parts of the dam were reasonably interpreted.Validation of the model prediction enhances its credibility,leading to the formulation of health diagnosis criteria for future long-term operation of the Xiaowan dam.The findings not only enhance the predictive ability and timely control of ultrahigh arch dams'performance but also provide a crucial basis for assessing the effectiveness of engineering treatment measures.

Impacts of artificial dams on terrestrial water storage changes and the Earth's elastic load response during 1950-2016: A case study of medium and large reservoirs in Chinese mainland

The construction of dams for intercepting and storing water has altered surface water distributions, landsea water exchanges, and the load response of the solid Earth. The lack of accurate estimation of reservoir properties through the land surface and hydrological models can lead to water storage simulation and extraction errors. This impact is particularly evident in many artificial reservoirs in China. The study aims to comprehensively assess the spatiotemporal distribution and trends of water storage in medium and large reservoirs(MLRs) in Chinese mainland during 1950-2016, and to investigate the gravity,displacement, and strain effects induced by the reservoir mass concentration using the load elasticity theory. In addition, the impoundment contributions of MLRs to the relative sea level changes were assessed using a sea-level equation. The results show impoundment increases in the MLRs during1950-2016, particularly in the Yangtze River(Changjiang) and southern basins, causing significant elastic load effects in the surrounding areas of the reservoirs and increasing the relative sea level in China's offshore. However, long-term groundwater estimation trends are overestimated and underestimated in the Yangtze River and southwestern basins, respectively, due to the neglect of the MLRs impacts or the uncertainty of the hydrological model's output(e.g., soil moisture, etc.). The construction of MLRs may reduce the water mass input from land to the ocean, thus slowing global sea level rise. The results of the impact of human activities on the regional water cycle provide important references and data support for improving the integration of hydrological models, evaluating Earth's viscoelastic responses under longterm reservoir storage, enhancing in-situ and satellite geodetic measurements, and identifying the main factors driving sea level changes.

DAM中波发射机A/D转换板故障分析和处理

阐述数字幅度调制(Digital Amplitude Modulation,DAM)中波发射机模数(Analog to Digital,A/D)转换原理、A/D转换板主要组成部分及其作用,列举A/D转换板在实际运行中出现的常见故障案例,对常见故障给出分析和处理方法,为今后该板的故障分析和处理工作提供参考。

Erosion Rates in Dam Catchments in Jordan—Effects of Topography, Geology, and Urbanizations

Erosion as a natural process produces soils, which are very important natural resources for the fest land plant- and animal kingdoms. Loss of the soil cover reduces agricultural production, biodiversity, and the role of soil as a filter for infiltrating water to replenish the groundwater. It also threatens the food supplies. The knowledge of erosion rates of rocks and terrains is important for developing proactive measures to protect soils from erosion and loss. In this study, erosion rates of catchment areas were calculated based on dams’ catchment extensions and the sediment loads transported by flood flows into dams’ lakes. The study results show that the chemically, via floodwater, transported quantities of materials are negligible compared to the solid materials transported by the water. It calculates erosion rates ranging from 0.013 to 0.212 mm/yr (13 - 212 m/106 yr) for the different catchment areas. Erosion rates in Jordan are, generally, higher than those calculated for the different parts of the world ranging from 2.5 to 60 m/106 yr. This fact can be explained by the very steep topography, calcareous rock cover of the catchment areas and the barren rock exposures.

DAM10KW中波广播发射机维护实操案例分析

本文主要阐述3个DAM10kW中波广播发射机维护实操案例,这些维护案例均来源于实际工作当中,其中每一步的维修理念都是根据发射机的故障现象对照图纸仔细研判,并通过一些测试设备一步一步详细进行的维护经验总结,具有可研性和参考价值。

DAM 10 kW中波广播发射机的技术特点和维护策略

随着我国社会现代化建设进程不断加快,在广播事业发展过程中对中波广播发射机的应用越来越普遍。DAM 10kW中波广播发射机应用了先进的数字调制和功率合成技术,可以有效提高中波发射机的整机效率,工作性能也比较稳定,操作比较方便。本文通过对DAM 10kW中波广播发射机运行原理和优势进行分析,明确了在DAM 10kW中波广播发射机运行过程中的技术特点。并基于技术特点制定了发射机精细化管理策略,以进一步提高发射机的运行稳定性和安全性,避免发射机在运行过程中出现故障问题。

RESEARCH ON SEEPAGE MONITORING MODEL OF EARTH-ROCK DAM

With the characteristics of seepage flow in earth-rock dams, a seepagemonitoring model was established based on the finite element method for 3-D seepage flow togetherwith observed data and was used to analyze and monitor the seepage of dams. In order to find out andmonitor the seepage status of the whole dam, the separation of seepage a-mount for dam body, damfoundation and side banks was made theoretically by using the model. Practical example shows thatthe accuracy of computed results is satisfactory and the separation results are more objective.

Breach mechanism and numerical simulation for seepage failure of earth-rock dams

In this study,a numerical model,which can capture the full process of the development of seepage passages,the collapse of dams and the failure due to overtopping,is proposed for earth-rock dams.The critical incipient velocity for the occurrence of seepage failure is derived by analyzing the forces acting on soil particles in the seepage passage.The sediment transport formula is proposed to simulate the erosion process and the evolution of breach within the dam.In this model,the grain size distribution,the compaction density and the strength of dam materials are reasonably accounted for.Furthermore,the influences of the direction of seepage paths,the slope of the dam and the velocity of water flow on the amount of erosion are also taken into consideration.The proposed model and the corresponding numerical programs are employed to simulate the development of breaches and discharge of two typical cases due to seepage failure.The development of breaches,the history of discharge and the peak flood flux predicted by the numerical models are rather comparable to the measured data,which confirms the validity of the proposed model and the feasibility of applying the model in evaluating the disaster consequences and preparing the emergency counter measurements in the case of dam collapse.

Dynamic probability evaluation of safety levels of earth-rockfill dams using Bayesian approach

In order to accurately predict and control the aging process of dams, new information should be collected continuously to renew the quantitative evaluation of dam safety levels. Owing to the complex structural characteristics of dams, it is quite difficult to predict the time-varying factors affecting their safety levels. It is not feasible to employ dynamic reliability indices to evaluate the actual safety levels of dams. Based on the relevant regulations for dam safety classification in China, a dynamic probability description of dam safety levels was developed. Using the Bayesian approach and effective information mining, as well as real-time information, this study achieved more rational evaluation and prediction of dam safety levels. With the Bayesian expression of discrete stochastic variables, the a priori probabilities of the dam safety levels determined by experts were combined wfth the likelihood probability of the real-time check information, and the probability information for the evaluation of dam safety levels was renewed. The probability index was then applied to dam rehabilitation decision-making. This method helps reduce the difficulty and uncertainty of the evaluation of dam safety levels and complies with the current safe decision-making regulations for dams in China. It also enhances the application of current risk analysis methods for dam safety levels.

Deformation prediction model of concrete face rockfill dams based on an improved random forest model

The unique structure and complex deformation characteristics of concrete face rockfill dams(CFRDs)create safety monitoring challenges.This study developed an improved random forest(IRF)model for dam health monitoring modeling by replacing the decision tree in the random forest(RF)model with a novel M5'model tree algorithm.The factors affecting dam deformation were preliminarily selected using the statistical model,and the grey relational degree theory was utilized to reduce the dimensions of model input variables.Finally,a deformation prediction model of CFRDs was established using the IRF model.The ten-fold cross-validation method was used to quantitatively analyze the parameters affecting the IRF algorithm.The performance of the established model was verified using data from three specific measurement points on the Jishixia dam and compared with other dam deformation prediction models.At point ES-10,the performance evaluation indices of the IRF model were superior to those of the M5'model tree and RF models and the classical support vector regression(SVR)and back propagation(BP)neural network models,indicating the satisfactory performance of the IRF model.The IRF model also outperformed the SVR and BP models in settlement prediction at points ES2-8 and ES4-10,demonstrating its strong anti-interference and generalization capabilities.This study has developed a novel method for forecasting and analyzing dam settlements with practical significance.Moreover,the established IRF model can also provide guidance for modeling health monitoring of other structures.