Edge detection of potential field data based on image processing methods

The conventional methods of edge detection can roughly delineate edge position of geological bodies,but there are still some problems such as low detection accuracy and being susceptible to noise interference.In this paper,three image processing methods,Canny,Lo G and Sobel operators are briefly introduced,and applied to edge detection to determine the edge of geological bodies.Furthermore,model data is built to analyze the edge detection ability of this image processing methods,and compare with conventional methods.Combined with gravity anomaly of Sichuan basin and magnetic anomaly of Zhurihe area,the detection effect of image processing methods is further verified in real data.The results show that image processing methods can be applied to effectively identify the edge of geological bodies.Moreover,when both positive and negative anomalies exist and noise is abundant,fake edge can be avoided and edge division is clearer,and satisfactory results of edge detection are obtained.

Feature fusion method for edge detection of color images

A novel feature fusion method is proposed for the edge detection of color images. Except for the typical features used in edge detection, the color contrast similarity and the orientation consistency are also selected as the features. The four features are combined together as a parameter to detect the edges of color images. Experimental results show that the method can inhibit noisy edges and facilitate the detection for weak edges. It has a better performance than conventional methods in noisy environments.

SAR image despeckling based on edge detection and nonsubsampled second generation bandelets

To preserve the sharp features and details of the synthetic aperture radar （SAR） image effectively when despeckling, a despeckling algorithm with edge detection in nonsubsampled second generation bandelet transform （NSBT） domain is proposed. First, the Canny operator is utilized to detect and remove edges from the SAR image. Then the NSBT which has an optimal approximation to the edges of images and a hard thresholding rule are used to approximate the details while despeckling the edge-removed image. Finally, the removed edges are added to the reconstructed image. As the edges axe detected and protected, and the NSBT is used, the proposed algorithm reaches the state-of-the-art effect which realizes both despeckling and preserving edges and details simultaneously. Experimental results show that both the subjective visual effect and the mainly objective performance indexes of the proposed algorithm outperform that of both Bayesian wavelet shrinkage with edge detection and Bayesian least square-Gaussian scale mixture （BLS-GSM）.

Real-time image processing and display in object size detection based on VC++

Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction （HCI）-friendly in- terface based on VC ＋＋ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.

An Improved Algorithm for Image Edge Detection Based on Lifting Scheme

Wavelet transform is an ideal way for edge detection because of its multi-scale property, localization both in time and frequency domain, sensitivity to the abrupt change of signals, and so on. An improved algorithm for image edge detection based on Lifting Scheme is proposed in this paper. The simulation results show that our improved method can better reflect edge information of images.

Novel welding image processing method based on fractal theory

Computer vision has come into used in the fields of welding process control and automation. In order to improve precision and rapidity of welding image processing, a novel method based on fractal theory has been put forward in this paper. Compared with traditional methods, the image is preliminarily processed in the macroscopic regions then thoroughly analyzed in the microscopic regions in the new method. With which, an image is divided up to some regions according to the different fractal characters of image edge, and the fuzzy regions including image edges are detected out, then image edges are identified with Sobel operator and curved by LSM (Lease Square Method). Since the data to be processed have been decreased and the noise of image has been reduced, it has been testified through experiments that edges of weld seam or weld pool could be recognized correctly and quickly.

APPLICATION OF MVP IN REAL TIME IMAGE PROCESSING

MVP is a digital signal processor, which is of MIMD structure and fit for multimedia application. MVP has several processors in it, and its operation is characteristic of parallelism and pipeline; therefore, real-time signal processing can be done on it. This paper presents the image processing system based on MVP, explains the principles of parallel task assignment and hardware pipeline design, and gives out the example of target tracking and edge detection.

Techniques of Image Processing Based on Artificial Neural Networks

This paper presented an online quality inspection system based on artificial neural networks. Chromatism classification and edge detection are two difficult problems in glass steel surface quality inspection. Two artificial neural networks were made and the two problems were solved. The one solved chromatism classification. Hue, saturation and their probability of three colors, whose appearing probabilities were maximum in color histogram, were selected as input parameters, and the number of output node could be adjusted with the change of requirement. The other solved edge detection. In this neutral network, edge detection of gray scale image was able to be tested with trained neural networks for a binary image. It prevent the difficulty that the number of needed training samples was too large if gray scale images were directly regarded as training samples. This system is able to be applied to not only glass steel fault inspection but also other product online quality inspection and classification.

Automatic Traffic Using Image Processing

The frequent traffic jams at major intersections call for an effective management system. The paper suggests implementing a smart traffic controller using real-time image processing. The sequence of the camera is analyzed using different edge detection algorithms and object counting methods. Previously they used matching method that means the camera will be installed along with traffic light. It will capture the image sequence. To set an image of an empty road as a reference image, the captured images are sequentially matched using image matching;but in my paper, we used filtering method, which filtered the image and released all waste objects and only showed the cars, and after it well showed the number of cars in image. My paper is software that takes a picture or video. It has been customized to be used in the future to control the traffic light sign by giving each sign sufficient time, depending on the number of cars on each direction.

AN ALGORITHM OF EDGE DETECTION BASED ON ENTROPY OPERATOR

This paper presents an algorithm of edge detection in image processing. A new entropy operator and threshold estimation technique are effectively proposed. The algorithm overcomes some drawbacks of Shiozaki operator. It not only has higher speed but also can extract the edge better. Finally, an example of 2D image is given to demonstrate the usefulness and advantages of the algorithm.

Edge Detection Based on Generative Adversarial Networks

Aiming at the problem that the detection effect of traditional edge detection algorithm is not good,and the problem that the existing edge detection algorithm based on convolution network cannot solve the thick edge problem from the model itself,this paper proposes a new edge detection method based on the generative adversarial network.The confrontation network consists of generator network and discriminator network,generator network is composed of U-net network and discriminator network is composed of five-layer convolution network.In this paper,we use BSDS500 training data set to train the model.Finally,several images are randomly selected from BSDS500 test set to compare with the results of traditional edge detection algorithm and HED algorithm.The results of BSDS500 benchmark test show that the ODS and OIS indices of the proposed method are 0.779 and 0.782 respectively,which are much higher than those of traditional edge detection algorithms,and the indices of HED algorithm using non-maximum suppression are similar.

Sharp Operator Based Edge Detection

Ahmad et al. in their paper [1] for the first time proposed to apply sharp function for classification of images. In continuation of their work, in this paper we investigate the use of sharp function as an edge detector through well known diffusion models. Further, we discuss the formulation of weak solution of nonlinear diffusion equation and prove uniqueness of weak solution of nonlinear problem. The anisotropic generalization of sharp operator based diffusion has also been implemented and tested on various types of images.

Learning Local Contrast for Crisp Edge Detection

In recent years, the accuracy of edge detection on several benchmarks has been significantly improved by deep learning based methods. However, the prediction of deep neural networks is usually blurry and needs further post-processing including non-maximum suppression and morphological thinning. In this paper, we demonstrate that the blurry effect arises from the binary cross-entropy loss, and crisp edges could be obtained directly from deep convolutional neural networks. We propose to learn edge maps as the representation of local contrast with a novel local contrast loss. The local contrast is optimized in a stochastic way to focus on specific edge directions. Experiments show that the edge detection network trained with local contrast loss achieves a high accuracy comparable to previous methods and dramatically improves the crispness. We also present several applications of the crisp edges, including image completion, image retrieval, sketch generation, and video stylization.

Spoofing Face Detection Using Novel Edge-Net Autoencoder for Security

Recent security applications in mobile technologies and computer sys-tems use face recognition for high-end security.Despite numerous security tech-niques,face recognition is considered a high-security control.Developers fuse and carry out face identification as an access authority into these applications.Still,face identification authentication is sensitive to attacks with a 2-D photo image or captured video to access the system as an authorized user.In the existing spoofing detection algorithm,there was some loss in the recreation of images.This research proposes an unobtrusive technique to detect face spoofing attacks that apply a single frame of the sequenced set of frames to overcome the above-said problems.This research offers a novel Edge-Net autoencoder to select convoluted and dominant features of the input diffused structure.First,this pro-posed method is tested with the Cross-ethnicity Face Anti-spoofing(CASIA),Fetal alcohol spectrum disorders(FASD)dataset.This database has three models of attacks:distorted photographs in printed form,photographs with removed eyes portion,and video attacks.The images are taken with three different quality cameras:low,average,and high-quality real and spoofed images.An extensive experimental study was performed with CASIA-FASD,3 Diagnostic Machine Aid-Digital(DMAD)dataset that proved higher results when compared to existing algorithms.

Feature Recognition of Low-resolution Fiber Image

The interpolatory edge operator is applied to the recognition of cotton and ramie fibers. Its performance is studied in comparison with the Canny edge operator in the fiber’s edge detection for cross-sectional image. The input image is interpolated other than Gaussian function smoothing. The quality of edge output is improved by the interpolatory edge operator. It produces edge output with good continuity for low-resolution input. The fine edge output, such as cross-markings, can be distinguished clearly, so the interpolatory edge operator is suitable for the study of cotton and ramie fibers. Furthermore, the application of the interpolatory edge operator can cut the hardware cost, reduce the storage and speed up the data transmission.

Enhancing the accuracy of area extraction in machine vision-based pig weighing through edge detection

The accuracy of extracting projected pig area is critical to the accuracy of the weight measurement of pigs by machine vision.The capability of both the conventional and the edge detection methods for extracting pig area was examined using the images of 47 pigs of different weights.Relationship between the threshold value and the extracted area was numerically analyzed for both methods.It was found that the accuracy of the conventional method depended heavily on the threshold value,while choice of threshold value in the edge detection approach had no influence on the extracted area over a wide range.In normal lighting conditions,both methods yielded comparable values of predicted weight;however,under variable light intensities,the edge detection method was superior to the conventional method,because the former was proven to be independent of light intensities.This makes edge detection an ideal method for area extraction during the walk-through weighing process where pigs are allowed to move around.

FILTERING OF MEDICAL ULTRASONIC IMAGES BASED ON A MODIFIED ANISTROPIC DIFFUSION EQUATION

Speckle noise reduction is a key problem of the image analysis of medical UltraSound images. In this paper, two important improvements have been developed to a fast anisotropic diffusion algorithm for speckle noise reduction. The Gaussian filter is firstly used before gradient calculation, and then the adaptive algorithm of the factor k is proposed. Numerous experimental results show that the proposed model is superior to other methods in noise removal, fidelity and edge preservation. It is suitable for the preprocessing of a great number of medical UltraSound images, such as three dimen- sional reconstruction.

A New Fast Edge Detection Algorithm Based on NAM-structured Plane Decomposition

The nonsymmetry and antipacking pattern representation model （NAM）, inspired by the concept of the packing problem, uses a set of subpatterns to represent an original pattern. The NAM is a promising method for image representation because of its ability to focus on the interesting subsets of an image. In this paper, we develop a new method for gray-scale image representation based on NAM, called NAM-structured plane decomposition （NAMPD）, in which each subpattern is associated with a rectangular region in the image. The luminance function of pixels in this region is approximated by an oblique plane model. Then, we propose a new and fast edge detection algorithm based on NAMPD. The theoretical analyses and experimental results presented in this paper show that the edge detection algorithm using NAMPD performs faster than the classical ones because it permits the execution of operations on subpatterns instead of pixels.

Classification of brain tumor using devernay sub-pixel edge detection and k-nearest neighbours methodology

Any disease can be treated only once it is imaged,detected and classified.This paper proposes a set of algorithms for classification of a brain tumor with better accuracy and efficiency.The proposal uses a JPEG format of the DICOM image fed into three stages namely pre-processing,segmentation using sub-pixel edge detection method and using the nearest neighbor methodology for the detection and differentiation of benign and malignant tumors.

基于计算机视觉与Canny算法的服装纸样轮廓提取

为提高服装二维纸样轮廓信息采集转换的准确性及方便性,设计了一种基于计算机视觉的服装纸样轮廓提取方法。将手机相机作为图像采集设备,采用相机标定的方法进行图像畸变矫正,对图像灰度化处理后进行伽马变换。通过改进的Canny算法对纸样图像进行边缘信息的提取,使用自适应双边滤波保边去噪;在原Sobel算子上增加了45°和135°方向的梯度模板计算梯度;采用自适应双阈值确定边缘;融合形态学算法处理轮廓;最后按需进行轮廓骨架提取。结果表明:本文方法适用于二维纸样的轮廓提取,其提取误差在0.15~1.50 cm之间,可实现单独对服装纸样的外轮廓、内轮廓及内外轮廓图的提取,完成轮廓的无差别提取,减少后期人工对轮廓图的编辑,提高二维纸样数字化录入效率。