Weakness Ranking Method for Subsystems of Heavy-Duty Machine Tools Based on FMECA Information

Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.

Distinction between critical current effects and intrinsic anomalies in the point-contact Andreev reflection spectra of unconventional superconductors

In this work,we discuss the origin of several anomalies present in the point-contact Andreev reflection spectra of（Li1-xFex）OHFeSe,LiTi2O4,and La2-xCexCuO4.While these features are similar to those stemming from intrinsic superconducting properties,such as Andreev reflection,electron-boson coupling,multigap superconductivity,d-wave and p-wave pairing symmetry,they cannot be accounted for by the modified Blonder–Tinkham–Klapwijk（BTK） model,but require to consider critical current effects arising from the junction geometry.Our results point to the importance of tracking the evolution of the dips and peaks in the differential conductance as a function of the bias voltage,in order to correctly deduce the properties of the superconducting state.

Maintenance Management Research of a Large-span Continuous Rigid Frame Bridge Based on Reliability Assessment by Using Strain Monitored Data

When the bridge components needing maintenance are the world problem at present,and the health monitoring system is considered to be a very help­ful tool for solving this problem.In this paper,a large number of strain data acquired from the structural health monitoring system(SHMS)installed on a continuous rigid frame bridge are adopted to do reliability assessment.Firstly,a calculation method of punctiform time-dependent reliability is proposed based on the basic reliability theory,and introduced how to cal­culate reliability of the bridge by using the stress data transformed from the strain data.Secondly,combined with“Three Sigma”principle and the basic pressure safety reserve requirement,the critical load effects distribu­tion function of the bridge is defined,and then the maintenance reliability threshold for controlling the unfavorable load state which appears in the early operation stage of this type bridge is suggested,and then the combi­nation of bridge maintenance management and health monitoring system is realized.Finally,the transformed stress distribution certifies that the load effects of concrete bridges practically have a normal distribution;as for the concrete continuous rigid frame bridge with C50 strength grade concrete,the retrofit reliability threshold should be valued at 6.13.The methodology suggested in this article can help bridge engineers do effective maintenance of bridges,which can effectively extend the service life of the bridge and bring better economic and social benefits.

Failure Mode Effects and Criticality Analysis Method of Armored Equipment Based on Testability Growth

In view of the low level testability of armored equipment,the important significance of armored equipment testability growth is discussed in this paper.The failure mode effects and criticality analysis( FMECA) method to realize testability growth is introduced.Centering on the testability growth demands of new armored equipment,the deficiencies of traditional FMECA are analyzed.And an enhanced FMECA( EFMECA) method is proposed.The method increases the analysis contents,combines the information before the failure occurrence and impending failure modes together organically.Then the failure symptoms is analyzed,the failure modes and effects is determined,and the state development trend is predicted.Finally,the application of EFMECA method is illustrated by the example of the failure mode of typical armored equipment engine.

Failure Modes of Machining Center in Test Run

To analysis the early failures of machining centers,the failure mode effect and criticality analysis( FMECA) method was used. Based on the failure data collected from production lines in test run,all the failure modes of machining centers were summarized and criticality of all subsystems is figured out. And the process of FMECA was improved. The most critical subsystem was manipulator subsystem. The most critical failure mode was impacted manipulator. Reasons and effect of some important failure modes were analyzed. And some suggestions to solve failures were given.

Reliability Analysis of Unmanned Aerial Vehicles Flight Control System Based on Reliability Analysis Technologies

The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact of their systems,long distance of remote control and skill of manipulator technology.According to the application of engineering application,failure mode effects and criticality analysis( FMECA),failure reporting analysis and corrective action comprehensive analysis systems( FRACAS)and fault tree analysis( FTA)( 3 F) were combined.And also a set of user-friendly,more time,more efficient and accurate reliability analysis system were explored.

Interplay of superconductivity and d-f correlation in CeFeAs_(1-x)P_xO_(1-y)F_y

The recent discovery of high-temperature superconductivity in iron-based pnictides （chalcogenides） not only trig- gers tremendous enthusiasm in searching for new superconducting materials, but also opens a new avenue to the study of the Kondo physics. CeFeAsO is a parent compound of the 1111-type iron-based superconductors. It shows 3d- antiferromagnetic （AFM） ordering below 139 K and 4f-AFM ordering below 4 K. On the other hand, the phosphide CeFePO is a ferromagnetically corelated heavy-fermion （HF） metal with Kondo scale TK 10 K. These properties set up a new platform for research of the interplay among magnetism, Kondo effect, and superconductivity （SC）. In this review, we present the recent progress in the study of chemical pressure effect in CeFeAsOl_yFy （y = 0 and 0.05）. This P/As-doping in CeFeAsO serves as an effective controlling parameter which leads to two magnetic critical points, Xcl -- 0.4 and Xc2 - 0.92, associated with suppression of 3d and 4f magnetism, respectively. We also observe a turning point of AFM-FM ordering of Ce3＋ moment at Xc3 - 0.37. The SC is absent in the phase diagram, which is attributed to the destruction to Cooper pair by Ce-FM fluctuations in the vicinity of Xcl. We continue to investigate CeFeAsl-xPxO0.95Fo.os. With the separation of xcl and xc3, this chemical pressure results in a broad SC region 0〈 x 〈 0.53, while the original HF behavior is driven away by 5% F- doping. Different roles of P and F dopings are addressed, and the interplay between SC and Ce-4f magnetism is also discussed.

Voltage-controlled Kosterlitz–Thouless transitions and various kinds of Kondo behaviors in a triple dot device

The transport property and phase transition for a parallel triple dot device are studied by adopting Wilson＇s numerical renormalization group technique, focusing on the effects of level spacings between neighboring dot sites. By keeping dot 2at the half-filled level and tuning the level differences, it is demonstrated that the system transits from local spin quadruplet to triplet and doublet sequently, and three kinds of Kondo peaks at the Fermi surface could be found, which are separated by two Kosterlitz–Thouless type quantum phase transitions and correspond to spin-3/2, spin-1, and spin-1/2 Kondo effect,respectively. To obtain a detailed understanding of these problems, the charge occupation, the spin–spin correlation, the transmission coefficient, and the temperature-dependent magnetic moment are shown, and necessary physical arguments are given.

A Modified Lattice Model of the Reversible Effect of Axial Strain on the Critical Current of Polycrystalline REBa2Cu3O7-δ Films

The strain effect on the critical current is one of the most important properties for polycrystalline YBa2 Cu3O7-δ （REBCO, RE： rare earth） films, in which the reversible effect is intrinsic in the range of strain 0 and the irreversible strain εirr. By introducing the applied strain, a modified grain boundaries （GBs） in the REBCO film is developed. lattice model combining the strain and misorientation of A good agreement of the calculation on the lattice model with the experimental data shows that the lattice model is able to well describe the reversible effect of axial strain on the critical current of the REBCO film, and provides a good understanding of the mechanism of the reversible effect of the strain. Moreover, the effects of the crystallographic texture of the REBCO film and the residual strain εr on the variation of the critical current with the applied strain are extensively investigated. Furthermore by using the developed lattice model, the irreversible strain εirr of the REBCO film can be theoretically determined by comparing the calculation of the critical current-strain curve with the experimental data.

Discharging patients home from the intensive care unit:A new trend

Discharging patients directly to home from the intensive care unit(ICU)is becoming a new trend.This review examines the feasibility,benefits,challenges,and considerations of directly discharging ICU patients.By analyzing available evidence and healthcare professionals'experiences,the review explores the potential impacts on patient outcomes and healthcare systems.The practice of direct discharge from the ICU presents both opportunities and complexities.While it can potentially reduce costs,enhance patient comfort,and mitigate complications linked to extended hospitalization,it necessitates meticulous patient selection and robust post-discharge support mechanisms.Implementing this strategy successfully mandates the availability of home-based care services and a careful assessment of the patient's readiness for the transition.Through critical evaluation of existing literature,this review underscores the significance of tailored patient selection criteria and comprehensive post-discharge support systems to ensure patient safety and optimal recovery.The insights provided contribute evidence-based recommendations for refining the direct discharge approach,fostering improved patient outcomes,heightened satisfaction,and streamlined healthcare processes.Ultimately,the review seeks to balance patientcentered care and effective resource utilization within ICU discharge strategies.

Effect of Ag substitution on structural,magnetic and magnetocaloric properties of Pr_(0.6)Sr_(0.4–x)Ag_xMnO_3 manganites

A systematic investigation on the structural, magnetic and magnetocaloric properties of Pr_（0.6）Sr_（0.4-x）Ag_xMnO_3（x=0.05 and 0.1） manganites was reported. Rietveld refinements of the X-ray diffraction patterns confirmed that all samples were single phase and crystallized in the orthorhombic structure with Pnma space group. Magnetic measurements in a magnetic applied field of 0.01T revealed that the ferromagnetic-paramagnetic transition temperature T_C decreased from about 293 to 290 K with increasing silver content from x=0.05 to 0.1. The reported magnetocaloric entropy change and relative cooling power for both samples were considerably remarkable with a △S_（max） value of 1.9 J/（kg·K）and maximum RCP values of 100 J/kg, under a magnetic field change（？μ0H） equal to 1.8T. The analysis of the universal curves gave an evidence of a second order magnetic transition for the studied samples. The magnetic field influence on both the magnetic entropy change and the relative cooling power was also studied and discussed.

Polarization effect on critical power and luminescence in an air filament

We demonstrate that the filamentation process is strongly influenced by the polarization state of the driver laser. When the laser polarization changes from linear to circular, the critical power for the self-focusing of a Ti：Sapphire laser （800 nm, 40 fs） in air increases from about 9.6 ± 1.0 to 14.9± 1.5 GW, while the second nonlinear refractive index n2 of air decreases from 9.9 × 10-2o to 6.4 ×10-20 cm2/W. We also demonstrate that the luminescence from the neutral nitrogen molecules at 337 nm is dependent on both the laser intensity and plasma density inside the filament.