Numerical Analysis of Magnetic-Shielding Effectiveness for Magnetic Resonant Wireless Power Transfer System

Magnetic radiation phenomena appear inevitably in the magnetic-resonance wireless power transfer （MR-WPT） system, and regarding this problem the magnetic-shielding scheme is applied to improve the electromagnetic performance in engineering. In this study, the shielding effectiveness of a two-coil MR-WPT system for different material shields is analyzed in theory using Moser＇s formula and Schelkunoff＇s formula. On this basis a candidate magnetic-shielding scheme with a double-layer structure is determined, which has better shielding effectiveness and coils coupling coefficient. Finally, some finite element simulation results validate the correctness of the theoretical analysis, and the shielding effectiveness with the double-layer shield in maximum is 30？dB larger than the one with the single-layer case.

Peak Power Effect on Skin Rejuvenation Using IPL: Lumecca IPL Evaluation

A high peak power IPL system (Lumecca) was tested to determine the correlation between a high peak power and the successful treatment of pigmented and vascular lesions. Short pulse duration in the millisecond range and high peak power of 3.3 kW/cm2 enabled selective and effective destruction, not only of pigment, but also of vessels in a comparable manner to a pulsed dye laser. Only one treatment session at a low fluence (8 - 16 J/cm2) was sufficient to achieve the desired results.

Wavelet network based predistortion method for wideband RF power amplifiers exhibiting memory effects

RF power amplifiers (PAs) are usually considered as memoryless devices in most existing predistortion techniques. Nevertheless, in wideband communication systems, PA memory effects can no longer be ignored and memoryless predistortion cannot linearize PAs effectively. After analyzing PA memory effects, a novel predistortion method based on wavelet networks (WNs) is proposed to linearize wideband RF power amplifiers. A complex wavelet network with tapped delay lines is applied to construct the predistorter and then a complex backpropagation algorithm is developed to train the predistorter parameters. The simulation results show that compared with the previously published feed-forward neural network predistortion method, the proposed method provides faster convergence rate and better performance in reducing out-of-band spectral regrowth.

Retrospective Analysis of Outcomes with a Unique IPL System

Introduction: Intense Pulsed Light (IPL) technology is well accepted in the medical aesthetic field for the treatment of various skin lesions, including pigmented and vascular lesions. The light penetrates into the skin and is selectively absorbed by lesion chromophore. Absorbed energy is converted into heat, coagulating the lesion, which naturally fades following the treatment. The current article presents a retrospective efficacy evaluation of an IPL device with high peak power. Methods: Representative treatment results were collected from several clinics based on photographs taken at baseline and after treatments. Photos were evaluated and analyzed for aesthetic improvement of the various skin conditions in different facial and body areas. Results: Analysis included cases of pigmented and vascular lesions, textural lesions, and more specific conditions such as melasma and rosacea. The two evaluators’ scoring demonstrated improvement in all cases according to the Global Aesthetic Improvement Scale (GAIS) scale. Conclusion: The vast experience gathered from the market in treating various skin lesions supports the safety and efficacy of the investigated IPL device. The device’s particular specifications contribute to the successful results and ease of treatment for the practitioner and the patient.

Design and Analysis of Sustainable Green Data Center with Hybrid Energy Sources

Development of renewable energy (RE) and mitigation of carbon dioxide, as the two largest climate action initiatives are the most challenging factors for new generation green data center (GDC). Reduction of conventional electricity consumption as well as cost of electricity (COE) with preferred quality of service (QoS) has been recognized as the interesting research topic in Information and Communication Technology (ICT) sector. Moreover, it becomes challenging to design a large-scale sustainable GDC with standalone RE supply. This paper gives spotlight on hybrid energy supply solution for the GDC to reduce grid electricity usage and minimum net system cost. The proposed framework includes RE source such as solar photovoltaic, wind turbine and non-renewable energy sources as Disel Generator (DG) and Battery. A hybrid optimization model is designed using HOMER software for cost assessment and energy evaluation to validate the effectiveness of the suggested scheme focusing on eco-friendly implication.

Air breakdown induced by the microwave with two mutually orthogonal and heterophase electric field components

The air breakdown is easily caused by the high-power microwave, which can have two mutually orthogonal and heterophase electric field components. For this case, the electron momentum conservation equation is employed to deduce the electric field power and effective electric field for heating electrons. Then the formula of the electric field power is introduced into the global model to simulate the air breakdown. The breakdown prediction from the global model agrees well with the experimental data. Simulation results show that the electron temperature is sensitive to the phase difference between the two electron field components, while the latter can affect obviously the growth of the electron density at low electron temperature amplitudes. The ionization of nitrogen and oxygen induces the growth of electron density, and the density loss due to the dissociative attachment and dissociative recombination is obvious only at low electron temperatures.

Influence of Structure Parameters on Performance of the Thermoelectric Module

A numerical model of thermoelectric module （TEM） is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyzed by the MATLAB numerical calculation.The numerical model is validated by the ANSYS thermal,electrical,and structural coupling simulation.The effects of the variable physical property parameters and contact effect on the output power and thermoelectric efficiency are evaluated,and the concept of aspect ratio optimal domain is proposed,which provides a new design approach for the TEM.

Input Trade Liberalization and Welfare Loss of Manufacturing Enterprises:Based on the Perspective of Efficient Market Power

Considering that upstream monopoly will lead to an exponential increase in the loss of social welfare,this paper investigates the impact of intermediate goods tariff concession on the welfare loss of manufacturing enterprises from the perspective of input trade liberalization and effective market power.It has been discovered that input trade liberalization significantly reduces the welfare loss of manufacturing enterprises.Due to the game condition in which oligopolies check each other and small businesses“gain from fishing”,the inhibitory impact increases as market share decreases.The mechanism test demonstrates that input trade liberalization boosts the effect of technical competition and minimizes welfare loss through promoting market development degree and reducing factor distortion.In addition,this paper also finds that the effect of input trade liberalization on high monopolistic power enterprises is obviously stronger than that of low monopolistic power enterprises.Furthermore,the impact on non-high-tech industries and capital-intensive enterprises is significant,while that on high-tech industries and labor-intensive industries is not.Therefore,the welfare loss should be investigated from the dual perspective of market structure and marker power.Competitiveness has an important effect,while trade liberalization of intermediate inputs has a pivotal effect on promoting market development and improving resource allocation efficiency.

The Instability of Terahertz Plasma Waves in Two Dimensional Gated and Ungated Quantum Electron Gas

The instability of terahertz（THz）plasma waves in two-dimensional（2D）quantum electron gas in a nanometer field effect transistor（FET）with asymmetrical boundary conditions has been investigated.We analyze THz plasma waves of two parts of the 2D quantum electron gas：gated and ungated regions.The results show that the radiation frequency and the increment（radiation power）in 2D ungated quantum electron gas are much higher than that in 2D gated quantum electron gas.The quantum effects always enhance the radiation power and enlarge the region of instability in both cases.This allows us to conclude that 2D quantum electron gas in the transistor channel is important for the emission and detection process and both gated and ungated parts take part in that process.

Effect of power scale of 974 and 633 nm lasers on the induced loss at 633 nm of Yb3＋/Al3＋ co-doped silica fiber

Induced loss at 633 nm is tested in Yb3＋∕Al3＋co-doped silica fiber by a core pumped with a 974 nm laser and probed with a 633 nm laser. The fiber is prepared by the modified chemical vapor deposition method combined with solution doping. Different power scales of pump light and probe light are used in the tests. It is found that there is a dynamic equilibrium between photobleaching induced by 633 nm probe light and photodarkening（PD）induced by 974 nm pump light. For the first time to our knowledge, the effect of 633 nm probe laser power on an induced loss test of Yb3＋∕Al3＋co-doped silica fiber is studied quantitatively. It suggests that as long as the633 nm probe light power is less than 0.2 m W, the induced loss is mainly contributed by the PD effect of pumping light, and the deviation of induced loss is less than 5%.

Polarization effect on critical power and luminescence in an air filament

We demonstrate that the filamentation process is strongly influenced by the polarization state of the driver laser. When the laser polarization changes from linear to circular, the critical power for the self-focusing of a Ti：Sapphire laser （800 nm, 40 fs） in air increases from about 9.6 ± 1.0 to 14.9± 1.5 GW, while the second nonlinear refractive index n2 of air decreases from 9.9 × 10-2o to 6.4 ×10-20 cm2/W. We also demonstrate that the luminescence from the neutral nitrogen molecules at 337 nm is dependent on both the laser intensity and plasma density inside the filament.

Effect of Ag substitution on structural,magnetic and magnetocaloric properties of Pr_(0.6)Sr_(0.4–x)Ag_xMnO_3 manganites

A systematic investigation on the structural, magnetic and magnetocaloric properties of Pr_（0.6）Sr_（0.4-x）Ag_xMnO_3（x=0.05 and 0.1） manganites was reported. Rietveld refinements of the X-ray diffraction patterns confirmed that all samples were single phase and crystallized in the orthorhombic structure with Pnma space group. Magnetic measurements in a magnetic applied field of 0.01T revealed that the ferromagnetic-paramagnetic transition temperature T_C decreased from about 293 to 290 K with increasing silver content from x=0.05 to 0.1. The reported magnetocaloric entropy change and relative cooling power for both samples were considerably remarkable with a △S_（max） value of 1.9 J/（kg·K）and maximum RCP values of 100 J/kg, under a magnetic field change（？μ0H） equal to 1.8T. The analysis of the universal curves gave an evidence of a second order magnetic transition for the studied samples. The magnetic field influence on both the magnetic entropy change and the relative cooling power was also studied and discussed.

Mass production of magnetocaloric LaFeMnSiB alloys with hydrogenation

LaFe_（11.39）Mn_（0.35）Si_（1.26）B_（0.1）Hxalloys were prepared by hydrogenation.Samples were annealed at 1343Kfor30-90 hto form the NaZn13 phase.La-rich andα-Fe secondary phases were also detected.Saturated hydrogenation at 553 Kand 0.15 MPa of H_2 pressure for 5hwas employed to improve the Curie temperature of the alloys to 279 K.The maximum magnetic entropy change,relative cooling power,and adiabatic temperature change of LaFe_（11.39）Mn_（0.35）Si_（1.26）B_（0.1）H_x annealed at 1343 Kfor 90hafter hydrogen absorption are 6.38J/（kg·K）（magnetic changesμ0ΔH =1.65T）,100.1J/kg（μ0ΔH =1.65T）,and 2.2 K（μ0ΔH =1.48T）,respectively.Although the maximum magnetic entropy change of the LaFe_（11.39）Mn_（0.35）Si_（1.26）B_（0.1）H_x alloys is lower than those of similar alloys with high purity raw materials,the relative cooling power is nearly the same.The effect of impurities of the raw materials used was also discussed.It is assumed that the impurity of 0.2wt.% Al is responsible for the reduced entropy change of the resulted alloys.The LaFe_（11.39）Mn_（0.35）Si_（1.26）B_（0.1）H_x alloys prepared by this method could be a low cost alternative material for room temperature magnetic cooling applications.