Bending Properties of GCr15 Steel Guide Rail under the Multi-step Loading

To analyze the bending properties of GCr15 steel guide rail based on the elastic-plastic theory, the novel bending loading method consisting of multi-step loading and corresponding unloading was applied in three specimens with different cross section shape and different heat treatment condition. According to the experimental results, using numerical calculation software program and the numerical simulation with finite element analysis （FEA）, the relationships among the maximal load and displacement on cross section shape with each step bend loading, the loading stroke with the heat treatment condition, and the loading stroke with cross section shape were gained, and also those curves were discussed qualitatively. Finally, the contrast results between the numerical simulation and experiment were carried out to study the influence about the multi-step loading on specimen. It is put forward that enlightenment for the straightening stroke in the precision linear guide rail manufacture process.

Influence of sample surface condition on nano indentation experiment

The microhardness and elastic modules of the materials weremeasured using the Nano Indenter II, which is a new measuring systemfor the mechanical properties of materials on nano-scale. It candetermine themicrohardness, elastic modules and other mechanicalproperties of materials through measuring applied load and depthunder indenter tip. The results indicated that surface condition ofsample such as the surface roughness affects the experimental preci-sion.

Static loading and vertical displacement at southern Siberia

Seismic method is usually used for elastic parametric estimation. This is why this method presents dynamic parameters of Earth. Frequency seismic range changes greatly from geodynamic modelling time. Now we have opportunity to use geodesy result for some years for elastic parameters estimation. Static solution from elastic theory may be used for the interpretation of long term results. It presents static elastic parameter. The inverse problem for different types of vertical surface loading on one year period is calculated. Two cases of loading with maximal and minimal area are presented. Results are determined by space geodesy and leveling methods. Current relation between atmospheric pressure and vertical displacements was estimated at the center of Siberian Anti Cyclone with size varied from 2000 km to 3000 kin. Pressure-displacement coefficients （PDC） can be achieved by three years obser- vation （0.997 mm/mbar for NVSK GPS station）. It is used for elastic module study of geology medium with maximum thickness up to 600 km. In the context of elastic model, the modulus of rigidity is estimated to be 113 GPa. Vast expanse of anti-cyclone may relate with rheology of crust and upper mantle. Smaller size of surface loading - local loading is seasonal variation of water reservoir. Annual vertical changes were obtained by leveling near the dam of the reservoir. PDC ratio was 1.15 mm/bar for these places. In elastic theory, the Young modulus E = 80 GPa （Poisson ratio = 0.25, the modulus of rigidity - 32 GPa） was calculated by sixteen years of leveling measurements. This result can effectively be represented for upper crust. Our results were checked by solution for coseismic displacement of Chyia- Altai earthquake （Sep. 27, 2003, M = 7.3）. Coseismic results calculated by static modules agree with experimental coseismic GPS data at 10% level.

Influence of Ammoniacal Copper Quaternary treatments on mechanical properties of blue-stained Lodgepole Pine wood

Three concentrations （2.8%, 2.0%, 1.2%） of Ammoniacal Copper Quaternary （ACQ） was selected to treat Lodgepole pine wood for evaluating ACQ treatment on mechanical properties of blue-stained wood. The bending modules of elasticity （MOE）, modules of rupture （MOR）, toughness and shearing strength parallel to grain on tangential surface, are tested according to the criteria GB1927-1943-91. Non-treated sample were also tested according to the same procedure. The results showed that the three groups specimen impregnated by different concentrations of ACQ solution met the AWPA standard 2003 of America （UC4A 6.4g/cm^3）. There were significant difference of toughness between treated wood and non-treated wood （p=0.01）, but there were no statistically significant differences among three concentrations in terms of toughness, and toughness of treated wood was approximately 20% lower than non-treated. MOR, MOE as well as sheafing strength parallel to grain were found to be not significantly different between treated wood and non-treated one, and there were no statistically significant difference among three concentrations of ACQ too. Toughness, MOR, MOE and sheafing strength parallel to grain increased with decrease of concentration of ACQ, but they were hardly affected by ACQ preservatives.

Design and application of the dynamic detection platform for testing the micromechanical properties of agricultural products

The micromechanical properties of agricultural products can be used to formulate simulation models and optimize processing parameters for harvest,packaging,and storage.In this study,a detection platform was designed for conducting mechanical tests on different specimens at the tissue level.The system provided controllable and precise displacements;the relative error was less than±1.0%.The displacement and force measurements were calibrated.Micromechanical tests of apple parenchyma tissues were conducted to evaluate the performance of the proposed platform.The stress-strain curves of the specimens and the micrographs of the microstructures can be obtained simultaneously during the tests.The proposed platform has the capability to test mechanical properties and obtain micro behaviors of agricultural products at the tissue level,which helps in studying the failure mechanism of agricultural products under external loading.