TWO-DIMENSIONAL STRESS WAVE ANALYSIS IN INCOMPRESSIBLE ELASTIC SOLIDS

Two-dimensional stress wares in n general incompressible elastic solid are investigated. First, baxic equations for simple wares and shock waves are presented for a general strain energy junction. Then the characteristic ware speeds and the associated characteristic vectors are deduced. It is shown that there usually exist two simple waves and two shock wares. Finally, two examples are given for the case of plane strain deformation and antiplane strain deformation, respectively. It is proved that, in the case of plane strain deformation, the oblique reflection problem of a plane shock is not solvable in general.

Using Refined Theory to Studied Elastic Wave Scattering and Dynamic Stress Concentrations in Plates with Two Cutouts

In this paper, based on complex variables and conformal mapping methods, using the refined dynamic equation of plates, elastic wave scattering and dynamic stress concentrations in plates with two cutouts were studied. Applying the orthogonal function expansion method, the problem to be solved can be reduced into the solution of a set of infinite algebraic equations. According to free boundary conditions, numerical results of dynamic moment concentration factors in thick plates with two circular cutouts analyze that: there will be more complex interaction changes between two-cutout situation than single cutout situation. In the case of low frequency or high frequency and thin plate, the hole-spacing in the absence of coupling interactions was larger or smaller. The numerical results and method can be used to analyze the dynamics and strength of plate-like structures.

Dynamic stress concentrations in thick plates with two holes based on refined theory

Based on complex variables and conformal mapping, the elastic wave scat- tering and dynamic stress concentrations in the plates with two holes are studied by the refined dynamic equation of plate bending. The problem to be solved is changed to a set of infinite algebraic equations by an orthogonM function expansion method. As examples, under free boundary conditions, the numerical results of the dynamic moment concen- tration factors in the plates with two circular holes are computed. The results indicate that the parameters such as the incident wave number, the thickness of plates, and the spacing between holes have great effects on the dynamic stress distributions. The results are accurate because the refined equation is derived without any engineering hypothese.

Relection of elastic waves at the elastically supported boundary of a couple stress elastic half-space

The relection elastic waves at the elastically supported boundary of a couple stress elastic half-space are studied in this paper. Different from the classical elastic solid, there are three kinds of elastic waves in the couple stress elastic solid, and two of them are dispersive. The boundary conditions of a couple stress elastic half-space include the couple stress vector and the rotation vector which disappear in the classical elastic solids. These boundary conditions are used to obtain a linear algebraic equation set, from which the amplitude ratios of relection waves to the incident wave can be determined. Then, the relection coeficients in terms of energy lux ratios are calculated numerically, and the normal energy lux conservation is used to validate the numerical results. Based on these numerical results,the inluences of the boundary parameters, which relect the mechanical behavior of elastic support, on the relection energy partition are discussed. Both the incident longitudinal wave（the P wave） and incident transverse wave（the SV wave） are considered.

Influence of the connecting condition on the dynamic buckling of longitudinal impact for an elastic rod

The stress wave propagation law and dynamic buckling critical velocity are formulated and solved by considering a general axial connecting boundary for a slender elastic straight rod impacted by a rigid body. The influence of connecting stiffness on the critical velocity is investigated with varied impactor mass and buckling time. The influences of rod length and rod mass on the critical velocity are also discussed. It is found that greater connecting stiffness leads to larger stress amplitude, and further results in lower critical velocity. It is particularly noteworthy that when the connecting stiffness is less than a certain value, dynamic buckling only occurs before stress wave reflects off the connecting end. It is also shown that longer rod with larger slenderness ratio is easier to buckle, and the critical velocity for a larger-mass rod is higher than that for a lighter rod with the same geometry.