Bolt support mechanism based on elastic theory

Mechanical model of anchorage surrounding rock considering tray effect was established based on elastic theory,in order to study the mechanism of bolt supporting.Elastic solutions of normal force at point in the interior of a semi-infnite solid were obtained by means of classical displacement function method in elasticity.The factors which influence stress of bolted surrounding rock,such as the length of bolt and tray effect,were analyzed.The absolute value of stress along bolt axes decreased rapidly with an increase in radical distance and the maximum appeared near ends of bolt.With increasing radical distance,the value of radical stress changed from positive to negative roughly and then increased to zero,with maximum at the middle of bolt.The evolution of hoop stress as radical distance increasing was similar with stress along bolt axes.With an increase in depth,the radical effect ranges of all normal stress components were reduced.These suggest that the effect from tray on stress along bolt axes of bolted surrounding rock could be neglected,except near surface of surrounding rock.

Bending and wave propagation analysis of axially functionally graded beams based on a reformulated strain gradient elasticity theory

A new size-dependent axially functionally graded(AFG) micro-beam model is established with the application of a reformulated strain gradient elasticity theory(RSGET). The new micro-beam model incorporates the strain gradient, velocity gradient,and couple stress effects, and accounts for the material variation along the axial direction of the two-component functionally graded beam. The governing equations and complete boundary conditions of the AFG beam are derived based on Hamilton's principle. The correctness of the current model is verified by comparing the static behavior results of the current model and the finite element model(FEM) at the micro-scale. The influence of material inhomogeneity and size effect on the static and dynamic responses of the AFG beam is studied. The numerical results show that the static and vibration responses predicted by the newly developed model are different from those based on the classical model at the micro-scale. The new model can be applied not only in the optimization of micro acoustic wave devices but also in the design of AFG micro-sensors and micro-actuators.

Monitoring the change in horizontal stress with multi-wave time-lapse seismic response based on nonlinear elasticity theory

Monitoring the change in horizontal stress from the geophysical data is a tough challenge, and it has a crucial impact on broad practical scenarios which involve reservoir exploration and development, carbon dioxide (CO_(2)) injection and storage, shallow surface prospecting and deep-earth structure description. The change in in-situ stress induced by hydrocarbon production and localized tectonic movements causes the changes in rock mechanic properties (e.g. wave velocities, density and anisotropy) and further causes the changes in seismic amplitudes, phases and travel times. In this study, the nonlinear elasticity theory that regards the rock skeleton (solid phase) and pore fluid as an effective whole is used to characterize the effect of horizontal principal stress on rock overall elastic properties and the stress-dependent anisotropy parameters are therefore formulated. Then the approximate P-wave, SV-wave and SH-wave angle-dependent reflection coefficient equations for the horizontal-stress-induced anisotropic media are proposed. It is shown that, on the different reflectors, the stress-induced relative changes in reflectivities (i.e., relative difference) of elastic parameters (i.e., P- and S-wave velocities and density) are much less than the changes in contrasts of anisotropy parameters. Therefore, the effects of stress change on the reflectivities of three elastic parameters are reasonably neglected to further propose an AVO inversion approach incorporating P-, SH- and SV-wave information to estimate the change in horizontal principal stress from the corresponding time-lapse seismic data. Compared with the existing methods, our method eliminates the need for man-made rock-physical or fitting parameters, providing more stable predictive power. 1D test illustrates that the estimated result from time-lapse P-wave reflection data shows the most reasonable agreement with the real model, while the estimated result from SH-wave reflection data shows the largest bias. 2D test illustrates the feasibility of the proposed inversion method for estimating the change in horizontal stress from P-wave time-lapse seismic data.

Theory of nine elastic constants of biaxial nematics

In this paper, a rotational invariant of interaction energy between two biaxial-shaped molecules is assumed and in the mean field approximation, nine elastic constants for simple distortion patterns in biaxial nematics are derived in terms of the thermal average （Dmn^（l）） （Dm＇n＇^（l＇））, where Dmn^（l） is the Wigner rotation matrix. In the lowest order terms, the elastic constants depend on coefficients Γ,Γ＇, λ, order parameters Q0 = Q0（D00^（2）） ＋Q2（D02^（2）＋D0-2^（2）） and Q2 = Q0（D20^（2）） ＋ Q2（D22^（2）＋D2-2^（2））. Here Γ and Γ＇ depend on the function form of molecular interaction energy vj′j″j （τ12） and probability function fk′k″k （τ12）, where r12 is the distance between two molecules, and λ is proportional to temperature. Q0 and Q2 are parameters related to multiple moments of molecules. Comparing these results with those obtained from Landau-de Gennes theory, we have obtained relationships between coefficients, order parameters used in both theories. In the special case of uniaxial nematics, both results are reduced to a degenerate case where K11=K33.

BEHAVIOR AS t→∞ OF THE SOLUTIONS OF THE LINEAR SYSTEM OF ELASTIC THEORY ON NON－STAR－SHAPED EXTERIOR DOMAINS

The behavior as t→∞ of solutions of the linear system of elastic equations defined on anon-star-tshaped exterior domains in Rn (n≥3) is discussed.It has showed that the local energydecays with arate of t-1+H (0≤H≤1),nonuniformly with respect to the geometrical propertiesof the obstacle.and when n is odd the local energy decays exponentially.For the classical elasticwave,when n=3,the behavior of the solution of the nonhomogeneous system with a right sideterm periodical with respect to time t is discussed.

Completeness of the system of eigenvectors of off-diagonal operator matrices and its applications in elasticity theory

This paper deals with off-diagonal operator matrices and their applications in elasticity theory. Two kinds of completeness of the system of eigenvectors are proven, in terms of those of the compositions of two block operators in the off-diagonal operator matrices. Using these results, the double eigenfunction expansion method for solving upper triangular matrix differential systems is proposed. Moreover, we apply the method to the two-dimensional elasticity problem and the problem of bending of rectangular thin plates on elastic foundation.

ENERGY PRINCIPLES IN THEORY OF ELASTIC MATERIALS WITH VOIDS

According to the basic idea of dual-complementarity, in a simple and unified way proposed by the author, various energy principles in theory of elastic materials with voids can be established systematically, In this paper, an important integral relation is given, which can be considered essentially as the generalized pr- inciple of virtual work. Based on this relation, it is possible not only to obtain the principle of virtual work and the reciprocal theorem of work in theory of elastic materials with voids, but also to derive systematically the complementary functionals for the eight-field, six-field, four-field and two-field generalized variational principles, and the principle of minimum potential and complementary energies. Furthermore, with this appro ach, the intrinsic relationship among various principles can be explained clearly.

ON SOME BASIC PRINCIPLES IN DYNAMIC THEORY OF ELASTIC MATERIALS WITH VOIDS

According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In this paper, an important integral relation in terms of convolutions is given,which can be con- sidered as the generalized principle of virtual work in mechanics.Based on this relation,it is possible not on- ly to obtain the principle of virtual work and the reciprocal theorem in dynamic theory of elastic materials with voids,but also to derive systematically the complementary functionals for the eight-field,six-field, four-field and two-field simplified Gurtin-type variational principles.Furthermore,with this approach,the in- trinsic relationship among various principles can be explained clearly.

Book Review “Fabrikant,V.I.Contact and Crack Problems in Linear Theory of Elasticity,Bentham Science Publishers,Sharjah,UAE(2010)”

As suggested by the title, this extensive book is concerned with crack and contact prob- lems in linear elasticity. However, in general, it is intended for a wide audience ranging from engineers to mathematical physicists. Indeed, numerous problems of both academic and tech- nological interest in electro-magnetics, acoustics, solid and fluid dynamics, etc. are actually related to each other and governed by the same mixed boundary value problems from a unified mathematical standpoint

Three-Dimensional Static Analysis of Nanoplates and Graphene Sheets by Using Eringen’s Nonlocal Elasticity Theory and the Perturbation Method

A three-dimensional(3D)asymptotic theory is reformulated for the static analysis of simply-supported,isotropic and orthotropic single-layered nanoplates and graphene sheets(GSs),in which Eringen’s nonlocal elasticity theory is used to capture the small length scale effect on the static behaviors of these.The perturbation method is used to expand the 3D nonlocal elasticity problems as a series of two-dimensional(2D)nonlocal plate problems,the governing equations of which for various order problems retain the same differential operators as those of the nonlocal classical plate theory(CST),although with different nonhomogeneous terms.Expanding the primary field variables of each order as the double Fourier series functions in the in-plane directions,we can obtain the Navier solutions of the leading-order problem,and the higher-order modifications can then be determined in a hierarchic and consistent manner.Some benchmark solutions for the static analysis of isotropic and orthotropic nanoplates and GSs subjected to sinusoidally and uniformly distributed loads are given to demonstrate the performance of the 3D nonlocal asymptotic theory.

On plane Λ-fractional linear elasticity theory

Non-local plane elasticity problems are discussed in the context of Λ-fractional linear elasticity theory. Adapting the Λ-fractional derivative along with the Λ-fractional space, where geometry and mechanics are valid in the conventional way, non-local plane elasticity problems are solved with the help of biharmonic functions. Then, the results are transferred into the initial plane.Applications are presented to homogeneous and the fractional beam bending problem.

RESEARCH ON A SYSTEMATIC METHODOLOGY FOR THEORY OF ELASTICITY

The equivalence between differential form and integral form of a systematic methodology for theory of elasticity is proved. A uniform framework of the systematic methodology is established. New system includes differential form, integral form and mixed form. All kinds of variational principle are proved by the equivalence between differential form and integral form. The idea for generalized virtual work and virtual function is presented.

NEW POINTSOF VIEW ON THE NONLOCAL FIELD THEORY AND THEIR APPLICATIONS TO THE FRACTURE MECHANICS( Ⅲ) ——RE_DISCUSS THE LINEAR THEORY OF NONLOCAL ELASTICITY

In this paper, it is proven that the balance equation of energy is the first integral of the balance equation of momentum in the linear theory of nonlocal elasticity. In other words, the balance equation of energy is not an independent one. It is also proven that the residual of nonlocal body force identically equals zero. This makes the transform formula of the nonlocal residual of energy much simpler. The linear nonlocal constitutive equations of elastic bodies are deduced in details, and a new formula to calculate the antisymmetric stress is given.

Preliminary Report on the Theory of Elastic Circular Plate with no Kirchhoff-Love Assumptions

In this paper, the theory of elastic circular plate with no classical Kirchhoff-Love assumptions is established on the basis of a previous paper. In this theory, no classical Kirchhoff-Love assumptions are pre-assumed and the axial symmetrical analytic solution of fixed circular plate under the action of uniform pressure is obtained. Comparison of this solution and the known classical solution shows that this new solution agrees better than classical solution with the experiment measurement.This gives also the quantitative effect of the thickness on the deflection of circular plate with moderate thickness.

A MATHEMATICAL THEORY OF MATERIALS WITH ELASTIC RANGE AND THE DEFINITION OF BACK STRESS TENSOR

In this paper, the theory of materi als with elastic range by Lucchesi and Podio_Guidugli(1988) has been generalized . It has also shown that there are some difficulties on the definition of back s tress as the “center” of the yield surface in the Cauchy space. The back stres s tensor is Lagrangian,and must be defined in the Lagrangian stress space.

THE FIRST-ORDER APPROXIMATION OF NON-KIRCHHOFF-LOVE THEORY FOR ELASTIC CIRCULAR PLATE WITH FIXED BOUNDARY UNDER UNIFORM SURFACE LOADING (Ⅲ)──NUMERICAL RESULTS

ased upon the differential equations and their related boundary conditions givenin the previous papers[1, 2], using a global interpolation method, this paper presents anumerical solution to the axisymmetric bending problem of non-Kirchhoff-Love theoryfor circular plate with fixed boundary under uniform surface loading. All the numericalresults obtained in this paper are compared with that of Kirchhoff-Love classicaltheory[3] and E. Reissner's modified theory[4]

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are investigated.The current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial velocity.For the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are used.The classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of time.In order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the LVI.Finite element(FE)simulations are conducted by means of the ABAQUS software.The effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

Analytic elasticity solution of bi-modulus beams under combined loads

A unified stress function for bi-modulus beams is proposed based on its mechanic sense on the boundary of beams. Elasticity solutions of stress and displacement for bi-modulus beams under combined loads are derived. The example analysis shows that the maximum tensile stress using the same elastic modulus theory is underestimated if the tensile elastic modulus is larger than the compressive elastic modulus. Otherwise, the maximum compressive stress is underestimated. The maximum tensile stress using the material mechanics solution is underestimated when the tensile elastic modulus is larger than the compressive elastic modulus to a certain extent. The error of stress using the material mechanics theory decreases as the span-to-height ratio of beams increases, which is apparent when L/h ≤ 5. The error also varies with the distributed load patterns.

CHEMICAL STRUCTURE DEPENDENCE OF THE INTERNAL ENERGY CONTRIBUTION IN RUBBER ELASTICITY

Conformational elasticity theory recently developed has been used to explore the internal energy contribution to the elastic force f(e)/f as a function of strain for poly(cis-1,4-isoprene) and poly(trans-1,4-isoprene). Calculated f(e)/f values are in good agreement with those obtained experimentally. Results show that behavior of f(e)/f is mainly contributed by chemical structure, or intramolecular interaction, supporting the experimental observations, and that the internal energy contribution is strain dependent.

Factors influencing pore-pressure prediction in complex carbonates based on effective medium theory

A calculation model based on effective medium theory has been developed for predicting elastic properties of dry carbonates with complex pore structures by integrating the Kuster-Toksǒz model with a differential method.All types of pores are simultaneously introduced to the composite during the differential iteration process according to the ratio of their volume fractions.Based on this model,the effects of pore structures on predicted pore-pressure in carbonates were analyzed.Calculation results indicate that cracks with low pore aspect ratios lead to pore-pressure overestimation which results in lost circulation and reservoir damage.However,moldic pores and vugs with high pore aspect ratios lead to pore-pressure underestimation which results in well kick and even blowout.The pore-pressure deviation due to cracks and moldic pores increases with an increase in porosity.For carbonates with complex pore structures,adopting conventional pore-pressure prediction methods and casing program designs will expose the well drilling engineering to high uncertainties.Velocity prediction models considering the influence of pore structure need to be built to improve the reliability and accuracy of pore-pressure prediction in carbonates.