Investigation of Electrical Parameters of Fresh Water and Produced Mixed Injection in High-Salinity Reservoirs

Assuming a reservoir with a typical salt-lake background in the Qaidam Basin as a testbed,in this study the var-iation law of the rock electrical parameters has been determined through water displacement experiments with different salinities.As made evident by the results,the saturation index increases with the degree of water injec-tion.When the salinity of the injected water is lower than 80000 ppm,the resistivity of the rock samplefirst decreases,then it remains almost constant in an intermediate stage,andfinally it grows,thereby giving rise to a‘U’profile behavior.As the salinity decreases,the water saturation corresponding to the inflection point of the resistivity becomes lower,thereby leading to a wider‘U’type range and a higher terminal resistivity.For dif-ferent samples,higher initial resistivity of the sample in the oil-bearing state,and higher resistivity after low-sali-nity water washing are obtained when a thicker lithology is considered.

Parameters of new three-water model based on nuclear magnetic experiment and optimization algorithm

Clastic rock reservoir is the main reservoir type in the oil and gas field.Archie formula or various conductive models developed on the basis of Archie’s formula are usually used to interpret this kind of reservoir,and the three-water model is widely used as well.However,there are many parameters in the threewater model,and some of them are difficult to determine.Most of the determination methods are based on the statistics of large amount of experimental data.In this study,the authors determine the value of the parameters of the new three-water model based on the nuclear magnetic data and the genetic optimization algorithm.The relative error between the resistivity calculated based on these parameters and the resistivity measured experimentally at 100%water content is 0.9024.The method studied in this paper can be easily applied without much experimental data.It can provide reference for other regions to determine the parameters of the new three-water model.

Electrical Parameters of the Vacuum Vessel in HT-7U Tokamak

A method is presented to express the electrical parameters of the vacuum vessel in this paper. According to the results of numerical computation and the distribution of the eddy currents, the mutual inductance can be given by calculating the flux produced by the toroidal eddy currents. The time constants of the vacuum vessel of HT-7U tokamak are derived from the decay characteristics of the eddy currents.

Influence of electrical parameters on H2O2 generation in DBD non-thermal reactor with water mist

A dielectric barrier discharge（DBD） reactor is introduced to generate H2O2 by non-thermal plasma with a mixture of oxygen and water mist produced by an ultrasonic atomizer.The results of our experiment show that the energy yield and concentration of the generated H2O2 in the pulsed discharge are much higher than that in AC discharge,due to its high energy efficiency and low heating effect.Micron-sized liquid droplets produced by an ultrasonic atomizer in water mist have large specific surface area,which greatly reduces mass transfer resistance between hydroxyl radicals and water liquids,leading to higher energy yield and H2O2 concentration than in our previous research.The influence of applied voltage,discharge frequency,and environmental temperature on the generated H2O2 is discussed in detail from the viewpoint of the DBD mechanism.The H2O2 concentration of 30 mg l^-1,with the energy yield of 2 gkW^-1h^-1 is obtained by pulsed discharge in our research.

Association among Geomagnetic Activity, Atmospheric Electric Field and Selected Meteorological Parameters

The association among the geomagnetic activity (Ap index) and atmospheric electric field, meteorological parameters was investigated using a long series of continuous data set available tor Colaba (18 ° 53'N, 72 ° 48'E, 11m ASL) for the period 1936-1966. The meteorological parameters used for the investigation are the surface pressure, temperature, wind velocity and relative humidity. The results of the above study indicate that the atmospheric electric field and the meteorological parameters are associated with the geomagnetic storms with Ap > 100 . The atmospheric electric field shows an increasing trend after the geomagnetic storm. The surface pressure dips and surface temperatures increase after a geomagnetic storm. The wind velocity shows a decreasing trend and the relative humidity shows an increasing trend after the geomagnetic storm.

Effects of the Shading Rate on the Electrical Parameters of CIGS-Based Solar Modules

The aim of this article is to study the effects of the shading rate on the electrical performance parameters of CIGS PV modules. The study concerns a new flexible CIGS type photovoltaic module with a power of 90 W, manufactured by the company Shenzhen Shine Solar Co., Ltd. This module, reference SN-CIGS90, is tested under the initial conditions to ensure its correct operation and to determine the initial values of the electrical parameters before shading. After this characterization test, the module is exposed under the actual operating conditions of the Renewable Energies Study and Research Center (CERER), located in Dakar, then 4 types of shading are performed with the same mask: partial shading 25% partial shading, 50% partial shading, 75% partial shading, and 100% full shading. The variation rates obtained on the experimental values of the 4 types of shading carried out determine that the shading phenomenon constitutes a factor that influences negatively on the electrical parameters of a CIGS-based PV module. Indeed, for 25% of the surface of the shaded module, there is a reduction of 58.139% of the maximum power and of 60.507% of the efficiency and for shading of 100%, the module loses 84.436% of its maximum power and 84.135% of its performance.

Influence of wettability of shaly sandstone on rock electricity parameters

It has been found that the existence of chlorite and illite will lead to the rock wettability of oil affinity.Chlorite and illite are developed in shaly sandstone of Yingcheng Formation in Longfengshan area,the saturation index n of 7 rock samples is very high,with the highest of 14.57,whereas the cementation index m is low.The X-ray diffraction of clay and whole rock analysis of 7 shaly sandstone samples are carried out,and the relationship between chlorite and illite content vs.m and n is established.It is concluded that the low m value and high n value are caused by the wettability of rock.In order to verify the influence of wettability on the parameters of rock electricity,this paper discusses the method of making artificial shaly sandstone and the control of wettability.This study provides certain reference for determining the saturation model of shaly sandstone and improving the logging interpretation accuracy of shaly sandstone reservoirs.

The Electrical Parameters Modeling and Experimentation of Copper Vapor Laser

In this paper, the present developments of copper vapor laser technology were computational modeling and simulations methods. In most of the cases, before the experiment, the functions of electrical parameters can be predicted by the use of physical simulation codes. A single simulation model describing the discharge circuitry was introduced. By solving the equations of circuit via Runge-Kutta method, the current and voltage pulses of the discharge tube were investigated, which are in good agreement with the experimental results of the same laser.

A study on effective parameters of electric cortical stimulation for motor-sensory brain mapping

Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries consecutively in Beijing Institute of Functional Neurosurgery with the epileptogenic zone located in perirolandic areas from

Electrical stimulation modulates injury potentials in rats after spinal cord injury

An injury potential is the direct current potential difference between the site of spinal cord injury and the healthy nerves. Its initial amplitude is a significant indicator of the severity of spinal cord injury, and many cations, such as sodium and calcium, account for the major portion of injury potentials. This injury potential, as wel as injury current, can be modulated by direct current field stimulation;however, the appropriate parameters of the electrical field are hard to define. In this paper, injury potential is used as a parameter to adjust the intensity of electrical stimulation. Injury potential could be modulated to slightly above 0 mV （as the anode-centered group） by placing the anodes at the site of the injured spinal cord and the cathodes at the rostral and caudal sections, or around-70 mV, which is resting membrane potential （as the cathode-centered group） by reversing the polarity of electrodes in the anode-centered group. In addition, rats receiving no electrical stimulation were used as the control group. Results showed that the absolute value of the injury potentials acquired after 30 minutes of electrical stimulation was higher than the control group rats and much lower than the initial absolute value, whether the anodes or the cathodes were placed at the site of injury. This phenomenon il ustrates that by changing the polarity of the electrical field, electrical stimulation can effectively modulate the injury potentials in rats after spinal cord injury. This is also beneficial for the spontaneous repair of the cel membrane and the reduction of cation influx.

Study on the Lightning-radaited Electric Field Components at Mesospheric Altitudes

In this paper we have extended the semi-analytical model presented by Yashunin et al.to compute both of the lightning vertical and horizontal electric field considering the effect of nonlinear atmospheric electric parameters,and validate its accuracy by using our 2-D FDTD method.It is noted that the semi-analytical model can predict not only the lightning vertical field,but also the horizontal electric field with a satisfied accuracy in a small region with a radius ranging from 5 to 30 km at a height from 80 to 90 km above the lightning strike point.Compared with the results in the free space with a vacuum,the conducting altitude atmosphere has a relatively little effect on the radiated field component,but it has much effect on the electrostatic and induction component because their duration times are longer than the local relaxation time.For example,the induction field component in the conducting nonlinear medium decreases by about 43%,compared with that in the free space with a vacuum.The induction field is larger than the radiation field component within a radius of 25 km at a height of 80 km above the lightning strike point.Therefore,although the induction component may be likely one extra energy source(except for the radiation field)for creating the pancake shape of some elves with a luminous central part,we have to take into account the effect of nonlinear atmospheric electric parameters on the prediction of induced field component peak value that is needed for the production of elves.

Research on the ions’axial temperature of a sympathetically-cooled ^(113)Cd^(+)ion crystal

Molecular dynamics simulation of a sympathetically-cooled ^(113)Cd^(+)ion crystal system is achieved.Moreover,the relationship between ions’axial temperature and different electric parameters,including radio frequency voltage and endcap voltage is depicted.Under stable trapping condition,optimum radio frequency voltage,corresponding to minimum temperature and the highest cooling efficiency,is obtained.The temperature is positively correlated with end-cap voltage.The relationship is also confirmed by a sympathetically-cooled ^(113)Cd^(+) microwave clock.The pseudo-potential model is used to illustrate the relationship and influence mechanism.A reasonable index,indicating ions’temperature,is proposed to quickly estimate the relative ions’temperature.The investigation is helpful for ion crystal investigation,such as spatial configuration manipulation,sympathetic cooling efficiency enhancement,and temporal evolution.

The Power Supply System of Ion Source for NBI

The power supply system of ion source for the Neutral Beam Injector (NBI) in the HT-7 superconducting tokamak is based on a single injector with one ion source that can deliver 700 kW of neutral beam power. Experiments and a discharges test on the ion source were successfully performed. In this paper, the circuit structures and features of every power supply are described and the results of the discharges test are presented.

Effect of system parameters on the size distributions of hollow nickel microspheres produced by an ultrasound-aided electrical discharge machining process

Ultrasound-aided electric discharge machining（EDM） is an emerging technology for producing hollow nickel microspheres.This technology combines traditional EDM with the cavitation and vibration effects of ultrasound to produce hollow microspheres.In this paper,ultrasound-aided EDM was carried out in a kerosene medium（the working solution）.The effects of various parameters on the sizes of microspheres were investigated using scanning electronic microscopy（SEM）.Smileview software was used to measure the sizes of the microspheres.Originpro software was used for statistical analysis to determine the size distributions of the microspheres.To study the effects of the system parameters on the sizes of the microspheres,we first investigated the necessity of using an ultrasonic wave with EDM.After comparing the experimental results with and without the ultrasonic field,we found that ultrasound-induced cavitation and vibration effects reduced the diameters of the microspheres.We then studied the effects of several electrical parameters,including the arc current,pulse width,and gap voltage,on the sizes of the microspheres at an ultrasound frequency of 40 kHz.Smaller microspheres could be obtained by lowering the arc current,pulse width,and gap voltage.

Effect of tilt angle on the performance and electrical parameters of a PV module:Comparative indoor and outdoor experimental investigation

Photovoltaic(PV)system’s performance is significantly affected by its orientation and tilt angle.Experimental investigation(indoor and outdoor)has been carried out to trace the variation in PV performance and electrical parameters at varying tilt angles in Malaysian conditions.There were two experimental modus:1)varying module tilt under constant irradiation level,2)varying irradiation intensity at the optimum tilt set up.For the former scheme,the irradiation level was maintained at 750 W/m^(2),and for the later arrangement,the module tilt angle was varied from 0 o to 80 o by means of a single-axis tracker.Results show that under constant irradiation of 750 W/m^(2),every 5 o increase in tilt angle causes a power drop of 2.09 W at indoor and 3.45 W at outdoor.In contrast,for the same condition,efficiency decreases by 0.54%for indoor case and by 0.76%at outdoor.On the other hand,for every 100 W/m^(2)increase in irradiation,solar cell temperature rises by 7.52℃at indoor and by 5.67℃at outdoor.As of module electrical parameters,open-circuit voltage,short-circuit current,maximum power point voltage and maximum power point current drops substantially with increasing tilt angle,whereas fill factor drops rather gradually.Outdoor experimental investigation confirms that the optimum tilt angle at Malaysian conditions is 15 o and orienting a PV module this angle will maximize the sun’s energy captured and thereby enhance its performance.

High Performance for Cu(In,Ga)Se2 Quaternary System-Based Solar Cells with Alternative Buffer Layers

In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as Jsc, Voc, QE and η of the quaternary system Cu(In,Ga)Se2 solar cells. The performance of Cu(In,Ga)Se2solar cells has been modeled and numerically simulated by using the SCAPS- 1D device simulation tool. The cells with a ZnSe, Zn(O,S) and (Zn,Mg)O buffer layers were compared with the reference CdS buffer layer. The investigation of ZnSe, Zn(O, S) and (Zn,Mg)O-based cells to substitute the traditional CdS in the future shows that the ZnSe-buffer layer is a potential material to replace CdS, which revealed the best efficiency of 20.76%, the other electrical parameters are: JSC = 34.6 mA/cm2, VOC = 0.76 V and FF = 79.6%. The losses as a function of the temperature are estimated at 0.1%/K, among all kinds of buffer layers studied. We have also shown that the use of a high band-gap buffer layer is necessary to obtain a better short-circuit current density JSC. From our results, we note that the chalcogenide solar cells with Zn-based alternative buffer layer have almost the same stability thatthe traditional CdS buffer layer solar cells have.

A system and analytical method for testing the electrical parameters of soil

The electrical parameters of the rock and soil are closely related to the physical parameters.By measuring the resistivity and polarizability of rock and soil reasonably,information on physical parameters such as moisture content,pore ratio and compaction degree can be obtained.A system for testing the electrical parameters of soil samples based on the middle step quadrupole method is developed in this article.The system uses a series of copper needles as the electrodes of the soil-mounted test tube,and uses a multi-point multi-layer test method for layered data acquisition,which can solve the problems caused by the capacitance phenomenon and the heterogeneity of the soil sample.At the same time,factors affecting the test results,such as uneven soil preparation and water addition and electrode disturbance,are regarded as noise.A data-analysis method based on median filtering is proposed to process and analyse the test results,and the relationships between resistivity,polarizability,moisture content and compaction degree of the sample are obtained.The results show that the resistivity decreases nonlinearly as moisture content increases,and the correlation with compaction is not strong;the polarizability increases as moisture content increases with fluctuation,and it first increases and then decreases with an increase in compaction.

Understanding of impact of carbon doping on background carrier conduction in GaN

The impact of carbon doping on the background carrier conduction in GaN has been investigated.It is found that the incorporation of carbon can effectively suppress the n-type background carrier concentration as expected.Moreover,from the fitting of the temperature-dependent carrier concentration and mobility,it is observed that high nitrogen-vacancy(VN)dominates the background carrier at room temperature which consequently results in n-type conduction.The doping agent(carbon atom)occupies the nitrogen site of GaN and forms CN deep acceptor as revealed from photoluminescence.Besides,a relatively low hole concentration is ionized at room temperature which was insufficient for the compensation of n-type background carriers.Therefore,we concluded that this background carrier concentration can be suppressed by carbon doping,which substitutes the N site of GaN and finally decreases the VN.

Rigorous theoretical derivation of lumped models to transmission line systems

By virtue of the negative electric parameter concept,i.e.negative lumped resistance,inductance,conductance and capacitance（N-RLGC）,the lumped equivalent models of transmission line systems,including the circuit model,two-portπ-network and T-network,are given.We start from the N-segment-ladder-like equivalent networks composed distributed parameters,and achieve the input impedance in the form of a continued fraction. Utilizing the continued fraction theory,the expressions of input impedance are obtained under three kinds of extreme cases,i.e.the load impedances are equal to zero,infinity and characteristic impedance,respectively.When the number of segment N is limited to infinity,they are transformed to lumped elements.Comparison between the distributed model and lumped model of transmission lines,the expression of tanh yd,which is the key term in the transmission line equations,are obtained by RLGC,furthermore,according to input admittance,admittance matrix and ABCD matrix of transmission lines,the lumped equivalent circuit models,π-networks and T-networks have been given.The models are verified in the frequency and time domain,respectively,showing that the models are accurate and efficient.