Research on Operation Optimization of Heating System Based on Electric Storage Coupled Solar Energy and Air Source Heat Pump

For heating systems based on electricity storage coupled with solar energy and an air source heat pump(ECSA),choosing the appropriate combination of heat sources according to local conditions is the key to improving economic efficiency.In this paper,four cities in three climatic regions in China were selected,namely Nanjing in the hot summer and cold winter region,Tianjin in the cold region,Shenyang and Harbin in the severe cold winter region.The levelized cost of heat(LCOH)was used as the economic evaluation index,and the energy consumption and emissions of different pollutants were analyzed.TRNSYS software was used to simulate and analyze the system performance.The Hooke-Jeeves optimization algorithm and GenOpt software were used to optimize the system parameters.The results showed that ECSA systemhad an excellent operation effect in cold region and hot summer and cold winter region.Compared with ECS system,the systemenergy consumption,and the emission of different pollutants of ECSA system can be reduced by a maximum of 1.37 times.In cold region,the initial investment in an air source heat pump is higher due to the lower ambient temperature,resulting in an increase in the LOCH value of ECSA system.After the LOCH value of ECSA system in each region was optimized,the heating cost of the system was reduced,but also resulted in an increase in energy consumption and the emission of different pollutant gases.

Applicability of sewage heat pump air-conditioning system

A sewage heat pump system and its application based on a project in Chongqing,China,were discussed. Based on the sewage conditions,a feasibility analysis of the sewage heat pump air conditioning system was conducted. The theoretical and quantitative calculations indicate that sewage flux in the city sewage main pipe in the project can satisfy heat exchange requirements,and taking water from the pipes has relatively small influence on the pipe net in summer and winter. The sewage heat pump air-conditioning system can save 21.5% operating cost in one year,which is energy efficient and environmentally friendly.

Simulation of Air Source Heat Pump with Refrigerant Injection for Heating Operation

An air source heat pump(ASHP)with refrigerant injection is proposed for the air conditioning system of electric vehicles(EVs),especially for efficient heating in cold winter,when there is no wasted heat of engines.The simulation model is built with the framework of two-phase fluid network,where the compressor is separated as two compressors and the economizer is treated as two heat exchangers in the injection path and the main refrigerant path.With the validated simulation model,the heating performance is analyzed,and the results show that the coefficient of performance(COP)of ASHP with refrigerant injection is higher than 1.4 and the discharge temperature is less than 100℃ when the outdoor temperature is-20℃.The above performance ensures that the air conditioning system and EVs can operate normally with high efficiency even in the cold winter,which is much helpful for the practicability of EVs.

Investigation on the Influence of Refrigerant Charge Amount on the Cooling Performance of Air Conditioning Heat Pump System for Electric Vehicles

The application of air conditioning heat pump(ACHP) in electric vehicles could lead to significant electrical power saving effect. As for an air conditioning heat pump system for electric vehicles, the influence of refrigerant charge amount should be investigated during the design phase. In this study, experimental method was employed to investigate the influence of the refrigerant charge amount on the performance of the ACHP system. The results showed that the refrigerant charge amount had different influence on the refrigerant properties at various locations within the system. The coefficient of performance and pressure-enthalpy diagram were calculated, and showed a close relationship with refrigerant charge amount under different compressor speeds. The degree of subcooling and the degree of superheating were recorded and the critical charge amount was determined by a typical practical test method. In addition, the critical refrigerant charge amount determined by the experimental method was also compared with two typical void fraction correlation models, and the model with consideration of two phase stream reaction of the refrigerant showed a good estimation accuracy on the critical charge amount.

新型低GWP制冷剂在-100~200℃的应用研究进展

制冷剂是蒸气压缩循环中必不可少的工作流体,氢氟烷烃类化合物是目前制冷、空调和热泵设备中的主要制冷剂,但该类制冷剂会引起全球变暖等问题,因此亟需开发应用性能相似、环境性能友好的新型制冷剂。介绍了不同制冷剂在-100~200℃蒸气压缩循环应用场景中的使用现状,并综述了具有前景的低GWP制冷剂替代方案研究进展;在此基础上,对HFO-1234yf、HFO-1234ze(E)、HFO-1234ze(Z)、HCFO-1233zd(E)、HFO-1336mzz(Z) 5种低GWP制冷剂在实际应用系统中的最新研究及关键问题进行总结。

混合工质电动汽车空调全生命周期气候性能分析

空调作为整车系统中环境调控的关键子系统,其全生命周期的碳排放对于电动汽车的环保和排放要求至关重要。本文结合汽车空调系统全生命周期气候性能LCCP模型及相关数据,对全国各省份电动汽车空调系统的LCCP情况进行分析,同时对两种不同制热方案以及不同电力碳强度下的LCCP进行了比较分析。结果表明,RE170/R134a低GWP混合工质(二甲醚与R134a质量分数比90∶10)替换后电动汽车空调LCCP值降低了11.2%~28.1%,而采用热泵替换PTC电加热器后电动汽车空调LCCP值降低了0~33.1%,此外,随着未来我国电力碳强度与电动汽车保有量的变化,至2035年单辆车的LCCP值将会下降31.7%~39.3%,而全国整体电动汽车LCCP值将大幅上升。

课程思政视域下空调用热泵技术及应用课程教学改革探索

高校承载着人才培养的重任,是大学生思想政治教育的重要阵地。推进课程思政建设是将价值观教育与知识传授和能力培养融合,帮助大学生塑造正确的世界观、人生观和价值观,是落实立德树人根本任务的重要举措。如何在知识传授中实现价值引领,避免课程思政教育与专业教育“两张皮”的问题,是目前课程思政教育中的关键问题之一。基于建筑环境与能源应用工程专业的空调用热泵技术及应用课程特点以及新时代背景下的人才要求,对课程内容蕴含的思政元素进行了初步探索,并对教学模式等进行了讨论,推进课程思政建设融合,打造高质量思政课堂。

Exergy Analysis of Electric Vehicle Heat Pump Air Conditioning System with Battery Thermal Management System

The exergy analysis of an electric vehicle heat pump air conditioning system(HPACS) with battery thermal management system was carried out by studying the exergy loss of each component. The results indicate that the compressor is the main source of system exergy loss in all operation conditions. The exergy loss distribution of HPACS is almost the same when the battery thermal management system integrated into the HPACS in cabin and battery mixed cooling mode and the system exergy loss was linearly related to the compressor speed in cooling modes. The performance of the HPACS is better than that of the positive temperature coefficient(PTC) heater in cabin heating mode. The degree of exergy efficiency improvement of the alternative mode was discussed at all operation conditions in cabin heating mode. The results indicate that the optimization effect using the electric vehicle HPACS to replace the PTC heater is obvious at lower compressor speed, surrounding temperature and internal condenser air flow rate.

电动车废热辅助空调系统的研究

针对目前电动车空调存在的节能性和低温适应性等问题,提出了一种电动车废热辅助热泵空调系统。该系统将多变频器协调控制技术、双级压缩循环技术、废热辅助热泵技术有机融合,通过仿真分析研究系统在不同运行状态下的系统性能。仿真结果表明:协调调节低压级压缩机和风扇电机的频率,可实现系统制冷/制热量和能效比的优化控制;合理设置单双级压缩的温度切换点,能提升制热性能、保证系统在低温工况下的可靠运行;利用废热辅助空气源热泵技术,能实现系统的节能。研究结果为减小空调系统对电动车续航里程的影响、推动电动车的普及提供了参考。

某纯电车型空调PTC不制热故障分析与改进

为分析电动汽车空调系统不制热故障原因,以某车企收到的4S店空调故障案例为例,使用质量管理工程师常用的检测方法和仪器对加热零部件进行分析与诊断,结果表明是由于软件问题导致熔断器开路,造成空调故障,提出对软件控制的临界值进行改进的故障排除建议。

新能源汽车空调热泵技术应用探讨

新能源汽车与国家节能减排的指导战略一致,在能源日益紧张的今天,即可解决民众出行对交通工具的需求,同时可减少车辆运行中对资源的消耗,也不会出现严重的环境污染问题,所以在未来有较大的发展潜力。制冷与制热是汽车空调的主要功能,传统燃油车的制冷制热技术已可非常成熟地利用燃油资源。然而,以往燃油车因技术的限制,虽然可进行制冷与制热的操作,但是存在较大的问题,比如能源利用率低,与我国能源战略的初衷相悖。新能源汽车具有无污染、零排放等优点,新能源汽车空调热泵技术的运用,可显著提高新能源汽车的综合性能,所以该技术在新能源汽车领域备受关注。本文对新能源热泵空调系统的工作模式及热泵空调技术应用状况进行探讨分析,梳理空调热泵的应用内容,探讨其在未来面临的发展机遇及面临的挑战。

基于蓄热装置辅助的燃料电池电动车供暖系统动态仿真

为了辅助燃料电池车辆预热,提升燃料电池在低温下的冷启动速率以及降低电动车能耗,该文提出了一种基于热泵和蓄热装置联合的燃料电池电动车供暖方案,并开展了燃料电池车辆系统动态仿真研究,对比了有无蓄热装置辅助的系统对车辆运行过程的影响。结果表明:在寒冷运行环境下,蓄热装置可确保驾驶循环工况下循环冷却液热量来源的连续性,相较于无蓄热装置的热管理系统,热泵和蓄热联合供暖方案可使空调系统能耗下降26%;利用蓄热装置辅助的供暖系统能够改善燃料电池电动车的冬季冷启动特性,优化车辆电池系统的热管理。

融霜工况影响下空气源热泵机组频率控制系统

空气源热泵机组在融霜工况下,由于外部环境温度低,机组内部的水箱和管路可能会结霜,导致传热效率下降、能耗增加,使得频率控制不精准。为此,设计融霜工况影响下空气源热泵机组频率控制系统。设计PLC频率控制结构、频率控制中央处理器与PID控制阀门,联合控制热源侧水泵变频。计算机组结霜量,获取换热器的有效集热量。基于分段调节思想,利用计算机调整侧水泵出水量和调节参数,计算融霜启动调频速度。由实验结果可知,所设计系统在不同融霜工况下控制效果与实际最为接近,控制结果误差最大仅为0.1 Hz,能够实现精准控制频率。

地埋管换热系统改造项目关键技术节点施工工艺研究

天津某管业公司建筑原采用常压燃气热水锅炉供热和分体式空调供冷,现拟以浅层地热能为基础能源对原供热制冷系统进行改造,施工前首先通过现场岩土热响应试验、地下管线探测等查明施工场地岩土体结构和换热能力,掌握地下综合管线的分布,并对建筑单位冷热负荷指标校正。重点阐述地埋管换热系统施工过程的关键技术节点,即竖直换热孔钻进、下管、回填及水平管线连接等,为类似改造项目提供参考。

基于决策树算法的冷冻水系统优化运行研究

以四川省成都市某办公建筑空气源热泵中央空调系统为研究对象,针对冷冻水系统制定夏季供冷工况下变冷冻水供水温度与变冷冻水流量相耦合的优化运行策略。首先依据运行数据确定出建筑负荷的主要影响因素;其次结合影响因素依据建筑负荷建立决策树算法,将系统运行工况分为7类;最后整理出每种分类工况下空调系统能效COPsys的分布情况,并以COPsys最高时对应的冷冻水供水温度和冷冻水泵设定频率作为该工况下最佳设定参数。结果表明:以上一年度的运行条件为基准,使用该运行策略在保证室内环境舒适度要求的前提下,夏季可以节约33%左右的电量,有效提升了中央空调系统的运行效率。

电动汽车CO_(2)热泵空调系统优化及制冷性能分析

为提升电动汽车CO_(2)热泵空调系统的制冷性能,文章构建了中间补气+回热器的跨临界CO_(2)系统,通过仿真研究了气体冷却器出口温度(T_(go))、气体冷却器压力(P_(g))、中间补气压力(P_(m))、相对补气量(β)、回热器过热度(ΔT)对系统制冷系数(EER)、制冷量(Q_(e))和压缩机排气温度(Tco)的影响及中间补气对回热器优化能力的提升。研究表明:存在最佳气体冷却器压力和最佳中间补气压力使得EER达到最大值,并得到两者与气体冷却器出口温度的关系式;气体冷却器出口温度上升会使系统性能下降,中间补气量和回热器过热度的增加能提升系统性能,EER提升了15.64%和6.07%,制冷量提升了27.88%和4.78%;回热器过热度的增加会导致压缩机排气温度上升,中间补气可降低压缩机排气温度,当限定压缩机排气温度时,中间补气可使回热器对EER和制冷量的优化能力分别提升了203%和173.87%;相对于基础跨临界CO_(2)系统,文章构建的优化系统在所研究工况内可使系统EER和制冷量分别提升18.38%和35.03%。

-30至50℃车辆工况下CO_(2)喷射器的适应性研究

为推动喷射器回收膨胀功技术的实车应用,本文开展了-30~50℃宽温区运行工况下车用压缩-引射式CO_(2)热泵系统制冷制热性能及喷射器膨胀功回收特性研究,重点分析了工作喷嘴对固定尺寸喷射器变工况适应性的影响。结果表明:制冷工况下随着环境温度升高,喷射系数递减,而升压比递增;制热工况下随着环境温度降低,喷射系数和升压比均先增大后减小;制冷工况下喷射器回收膨胀功占最大可回收膨胀功的16.7%~37.2%,制热工况下为9.9%~41.3%;以高温制冷工况设计的固定尺寸喷射器难以适应低温制热工况,偏离设计工况时,喷嘴出口过膨胀会造成激波能量损失,而低温制热工况下喷嘴出口因欠膨胀会导致喷射器无引射效果。

基于主动进气格栅的热泵空调系统能耗控制策略

为了降低热泵空调系统的能耗,针对车速、进气格栅开口面积等不同参数,以匹配主动进气格栅(AGS)电动汽车的热泵空调系统为研究对象,开发了一种热泵空调热管理系统及能耗控制策略,仿真计算高、低温环境和不同AGS开度条件下的系统能耗,并采用实车环境舱标定方法分析了-7℃低温和35℃高温环境不同AGS开度下空调系统及风阻能耗实测值差异。试验结果表明:高温和低温环境下,AGS开度越大,风阻能耗越高,但空调与风阻综合能耗越低;AGS开度增大相同数值时,高温条件下的能耗贡献量大于低温条件下的能耗贡献量。

太阳能—地源热泵式空调自适应模糊PID复合控制方法

为了优化太阳能-地源热泵空调系统的能耗和效率,减少环境因素对稳定运行的影响,提出自适应模糊PID复合控制方法。通过监控管理层上位机采集现场数据信号,并下发开关量信号至PLC控制器,再通过PLC控制器对太阳能集热器、循环水泵和温度进行控制。同时,将模糊PID控制器作为子程序控制循环水泵的频率,温度误差和误差变化率作为复合控制器的输入,通过模糊化处理输入信号,调节PID控制的相关参数,输出控制变频器频率的信号,以调节水泵电机的运转速度,精准控制室内温度。实验结果表明,该方法能提高太阳能的利用率,具有较好的抗干扰性能和较高的制冷、供暖性能系数,可实现高效的节能效果。