Application of Intelligent Technology in Building Electrical Lighting Project

The rapid development of intelligent technology has led to its introduction into the field of electrical lighting in buildings.It provides more technical support for system design,use,and management,and creates a comfortable and safe living environment.The adoption of intelligent technology enables the creation of an intelligent management system,where controllers and sensors are used to adjust the light source within the building,monitor and manage the lighting system in real time,monitor the energy consumption and safety of the system,and achieve the goal of energy saving and emission reduction.This paper briefly discusses the application and significance of intelligent technology in electrical lighting and puts forward design ideas to optimize electrical lighting and measures for lighting system management.

Simulation of optical and electrical synaptic functions in MoS_(2)/α-In_(2)Se_(3) heterojunction memtransistors

Memtransistors combine memristors and field-effect transistors, which can introduce multi-port control and have significant applications for enriching storage methods. In this paper, multilayer α-In2Se3and MoS2were transferred to the substrate by the mechanical exfoliation method, then a heterojunction MoS_(2)/α-In_(2)Se_(3) memtransistor was prepared. Neural synaptic simulations were performed using electrical and optical pulses as input signals. Through measurements, such as excitatory/inhibitory post-synaptic current(EPSC/IPSC), long-term potentiation/depression(LTP/LTD), and paired-pulse facilitation/depression(PPF/PPD), it can be found that the fabricated device could simulate various functions of neural synapses well, and could work as an electronic synapse in artificial neural networks, proposing a possible solution for neuromorphic storage and computation.

High-voltage super-junction lateral double-diffused metal-oxide semiconductor with a partial lightly doped pillar

A novel super-junction lateral double-diffused metal-oxide semiconductor （SJ-LDMOS） with a partial lightly doped P pillar （PD） is proposed. Firstly, the reduction in the partial P pillar charges ensures the charge balance and suppresses the substrate-assisted depletion effect. Secondly, the new electric field peak produced by the P/P junction modulates the surface electric field distribution. Both of these result in a high breakdown voltage （BV）. In addition, due to the same conduction paths, the specific on-resistance （Ron,sp） of the PD SJ-LDMOS is approximately identical to the conventional SJ-LDMOS. Simulation results indicate that the average value of the surface lateral electric field of the PD SJ-LDMOS reaches 20 V/μm at a 15 μm drift length, resulting in a BV of 300 V.

Anisotropic transport properties in the phase-separated La_(0.67)Ca_(0.33)MnO_3/NdGaO_3 (001) films

The anisotropic transport property was investigated in a phase separation La（0.67）Ca（0.33）MnO3（LCMO） film grown on（001）-oriented Nd GaO3（NGO） substrate. It was found that the resistivity along the b-axis is much higher than that along the a-axis. Two resistivity peaks were observed in the temperature dependent measurement along the b-axis, one located at 91 K and the other centered at 165 K. Moreover, we also studied the response of the resistivities along the two axes to various electric currents, magnetic fields, and light illuminations. The resistivities along the two axes are sensitive to the magnetic field. However, the electric current and light illumination can influence the resistivity along the b-axis obviously, but have little effect on the resistivity along the a-axis. Based on these results, we believe that an anisotropicstrain-controlled MnO6 octahedra shear-mode deformation may provide a mechanism of conduction filaments paths along the a-axis, which leads to the anisotropic transport property.

Reversal of circularly polarized luminescence direction and an“onoff”switch driven by exchange between UV light irradiation and the applied direct current electric field

We report the rational design of a dual stimulus-activated quaternary chiral emission nematic liquid crystals(Q-N*-LCs)containing light-driven chiral dopant R-S-R-1,a static chiral dopant S-2 and an achiral Nile Red(NR)in a nematic liquid crystal(SLC1717).The dopant R-S-R-1 acts as a dynamic chiral donor and an energy donor,and the achiral NR serves as a circularly polarized luminescence(CPL)emitter and energy acceptor.Interestingly,this kind of Q-N*-LCs appears reversal CPL emission direction(L-CPL)using 365 nm UV light irradiation compared with the initial state(R-CPL).Most importantly,the“On-Off”CPL switch behavior of Q-N*-LCs can be repeatedly driven by revoking or rearranging the applied direct current(DC)electric field.An OR chiral information logic gate demonstrates that this dual driven Q-N*-LCs can be potentially used for chiral information storage and coding.

Electric field tunable strong transverse light current from nanoparticles embedded in liquid crystal

We present an exact solution to the problem of electromagnetic scattering by nanosphere clusters embedded in a liquid crystal cell, based on the Mie theory. The dependence of the scattering property on the structure parameters is investigated in detail. It is shown that strong transverse light currents at the optical frequency can be obtained from these complex structures. Furthermore, we find that sign reversal of the transverse light current can be realized by changing frequency and voltage. The physical origins of these phenomena have been analyzed.The transverse light current for subwavelength nanoscale dimensions is of practical significance. Thus, the application of these phenomena to optical devices is

Band gap engineered polymeric-inorganic nanocomposite catalysts:Synthesis, isothermal stability, photocatalytic activity and photovoltaic performance

Polymeric-inorganic nanocomposite catalysts were synthesized by facile one-pot chemical polymerization of pyrrole in the presence of titanium dioxide nanoparticles. The electrical, optical, photovoltaic performance of dye sensitized solar cell（DSSC） and visible light driven photocatalytic activities of the nanocomposite were investigated. The prepared nanocomposite displays excellent photo-activity, attaining 100% degradation of methyl orange dye in 60 min under visible light source while 55% for pure TiO_2 under similar experimental conditions. The photovoltaic performance of the polypyrrole-titanium dioxide（PPy-TiO_2） nanocomposite has a 51.4% improvement with a photo-conversion efficiency of 8.07% as compared to pure TiO_2 based DSSC. By comparing the physical mixture of the PPy-TiO_2 nanocomposite and pristine TiO_2, the enhanced activity of the PPy-TiO_2 nanocomposite can be attributed to the reduced charge transfer resistance, outstanding electrical conductance of the PPy, the nano-sized structure of TiO_2 and their synergetic effect. Furthermore, the PPy-TiO_2 nanocomposite shows excellent electrical conductivity and isothermal stability under ambient conditions below 110？C.

From micro-to nanosized particles:Selected characterization methods and measurable parameters

Airborne micro- and nanoparticles-aerosols - play an important role in many natural phenomena and in a variety of industrial processes, as well as the public health issue. They may be of natural or anthropogenic origin; their presence in an environment might be intentional or due to undesirable release. In any case, merely the particle detection and characterization, ideally in real-time, provide an insight into the potential burden allowing also controlling and abatement measures. Due to the broad size range it is not possible to characterize the entire particle spectrum with only one method. This contribution discusses selected optical techniques based on elastic light scattering, which are suitable for characterization of micrometer sized particles and particular electrical techniques allowing measurement of nanoparticles. It is shown that combination of instruments measuring different properties of the same nanoparticles offers derivative parameters contributing to more complete characterization of aerosols