Electric field intensity measurement by using doublet electromagnetically induced transparency of cold Rb Rydberg atoms

We demonstrate a simple method to measure electric field intensity by using doublet electromagnetically induced transparency(EIT) spectra of cold Rb Rydberg atoms, where the frequency of the coupling laser does not need to be locked. Based on the Stark splitting of the Rb Rydberg state, 10D_(3/2), under electric fields and the corresponding calculated polarizabilities, the real electric field intensity is calculated using the difference in radio-frequency diffraction between two acousto-optic modulators, which acts as a frequency criterion that allows us to measure the electrical field without locking the coupling laser. The value measured by this simple method shows a good agreement with our previous work [Opt.Express 29 1558(2021)] where the frequency of the coupling laser needs to be locked with an additional EIT spectrum based on atom vapor and a proportional–integral–differential feedback circuit. Our presented method can also be extended to the measurement of electric field based on hot Rydberg atom vapor, which has application in industry.

Detecting Impact Damage in Carbon Fabric/epoxy-matrix Composites by Ultrasonic F-scan and Electrical Resistance Measurement

The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact damage energy threshold value of carbon fabric/epoxy-matrix composites can determine by using ultrasonic F-scan. When the impact energy exceeds the threshold value, damage is generated in composites. Electrical resistance of impacted composites is changed owing to the contact of each carbon fiber unit in composites, which cause a change of the series-parallel in conductors. The veracity of detecting impact damage in composites can be improved in this case.

ELECTRIC RESISTANCE MEASUREMENT OF CARBON FIBRE SMART CONCRETE

After having measured the electric resistance of carbon firbre reinforced concrete (CFRC) by applying a D. C. current, it was found that the current passing through the specimen under a constant voltage decreased with the time, and if changing the value of voltage, the electric resistance was obviously affected. When current flew through the specimen, polarisation emerged under a high votage (>5 upsilon), but that could be neglected under a low voltage (<5 upsilon).(1)

Evaluation of Impact Damage Tolerance in Carbon Fabric/epoxy-matrix Composites by Electrical Resistance Measurement

Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensity and electrical resistance of carbon fabric/epoxy-matrix composites was studied in this paper. The experimental results shows that impact can cause damage in composites, degenerate compressive intensity, and increase resistance. The electrical resistance change rate was used as an evaluation indicator of impact damage tolerance of composites. Impact damage, which results from the applying process of composites, can be identified in time by electrical resistance measurement. So, the safety performance of composites can also be improved.

Traceability Technology of DC Electric Energy Metering for On-Site Inspection of Chargers

The on-site inspection of high-power DC chargers results in new DC high-current measurement and DC energy traceability system requirements.This paper studies the traceability technology of electric energy value for automotive high-power DC chargers,including:(1)the traceability method of the built-in DC energy meter and shunt of the charger;(2)precision DC high current and small precision DC voltage output and measurement technology.This paper designs a 0.1 mA∼600 A DC high current measurement system and proposes a 0.005 level DC powermeasurement traceability system.The uncertainty evaluation experiment of theDC powermeasurement calibration system and the high-power DC charger’s on-site calibration experiment results verify the method’s effectiveness and feasibility in this paper.The experimental results show that the combined standard uncertainty of the DC power metering verification system can be 0.0451%.

A Novel Bidirectional Interaction Model and Electric Energy Measuring Scheme of EVs for V2G with Distorted Power Loads

With the increasing demand for petroleum resources and environmental issues,new energy electric vehicles are increasingly being used.However,the large number of electric vehicles connected to the grid has brought new challenges to the operation of the grid.Firstly,A novel bidirectional interaction model is established based on modulation theory with nonlinear loads.Then,the electric energy measuring scheme of EVs for V2G is derived under the conditions of distorted power loads.The scheme is composed of fundamental electric energy,fundamental-distorted electric energy,distorted-fundamental electric energy and distorted electric energy.And the characteristics of each electric energy are analyzed.Finally,the correctness of the model and energy measurement method is verified by three simulation cases:the impact signals,the fluctuating signals,and the harmonic signals.

Estimation of the Lyman-α signal of the EFILE diagnostic under static or radiofrequency electric field in vacuum

The electric field induced Lyman-a emission diagnostic aims to provide a non intrusive and precise measurement of the electric field in plasma, using a beam of hydrogen atoms prepared in the metastable 2s state. The metastable particles are obtained by means of a proton beam extracted from a hydrogen plasma source, and neutralised by interaction with vaporised caesium. When a 2s atom enters a region where an electric field is present, it undergoes a transition to the 2p state （Stark mixing）. It then quickly decays to the ground level, emitting Lyman-a radiation, which is collected by a photomultiplier. The 2s → 2p transition rate is proportional to the square of the magnitude of the electric field, and depends on the field oscillation frequency （with peaks around l GHz）. By measuring the intensity of the Lyman-a radiation emitted by the beam it is possible to determine the magnitude of the field in a defined region. In this work, an analysis of the behaviour of the diagnostic under static or radiofrequency electric field is presented. Electric field simulations obtained with a finite element solver of Maxwell equations, combined with theoretical calculations of the Stark mixing transition rate, are used to develop a model for the interpretation of photomultiplier data. This method shows good agreement with experimental results for the static field case, and allows to measure the field magnitude for the oscillating case.

Dielectric Studies on CuO-Na₂O-B₂O₃Glasses

This work is aimed to shed light on the dielectric behavior of CuO containing glasses, since no publications concerning this issue have been presented before. Different glasses in the binary Na2O-B2O3 system were prepared by melt annealing technique. XRD spectra have shown that the amorphous structure is dominant in all glasses containing mixed concentrations from CuO and Na2O. The crystalline phases appeared only in glass free from Na2O. The dielectric spectroscopy is applied to shed some light on the conduction mechanisms in terms of changing both the dielectric constant and the electrical modulus of the investigated glasses. The ac conductivity increases with increasing frequency and decreases with increasing CuO concentration. Both the dielectric constant and dissipation loss is decreased with increasing frequency. Correlated barrier hopping (CBH) is considered an appropriate conduction mechanism results from the increase of frequency.

Development of a Module for Measuring Electrical Variables in Power Transformers Based in IoT,to Manage and Monitoring by Telemetry Mechanism

This work shows the development of a module that performs measurements of electrical variables in a low voltage power transformer.These variables are sent by means of the IEEE802.11 standard,connecting to a database stored in the cloud;associating with the meter IoT concepts,this to allow a client to perform an analysis,monitoring and management of their electrical network.For the construction of this module,non-invasive current sensors connected to a three-phase meter are used and a communication card is used that allows data to be extracted from the meter and sent to the cloud database.This module,to convert a conventional electrical power transformer into a smart electrical power transformer,making it a Smart Object and thus extract information from it telemetrically in real time.

Stress and strain analysis on the anastomosis site sutured with either epineurial or perineurial sutures after simulation of sciatic nerve injury

The magnitude of tensile stress and tensile strain at an anastomosis site under physiological stress is an important factor for the success of anastomosis following suturing in peripheral nerve injury treatment. Sciatic nerves from fresh adult cadavers were used to create models of sciatic nerve injury. The denervated specimens underwent epineurial and perineurial suturing. The elastic modulus （40.96 ＋ 2.59 MPa） and Poisson ratio （0.37 ＋ 0.02） of the normal sciatic nerve were measured by strain electrical measurement. A resistance strain gauge was pasted on the front, back left, and right of the edge of the anastomosis site after suturing. Strain electrical measurement results showed that the stress and strain values of the sciatic nerve following perineurial suturing were lower than those following epineurial suturing. Scanning electron microscopy revealed that the sciatic nerve fibers were disordered following epineurial compared with perineurial suturing. These results indicate that the effect of perineurial suturing in sciatic nerve injury repair is better than that of epineurial suturing.

IN SlTU TRUING/DRESSING OF DIAMOND WHEEL FOR PRECISION GRINDING

An application for achieving on-machine truing/dressing and monitoring of diamond wheel is dealt with in dry grinding. A dry electrical discharge （ED） assisted truing and dressing method is adopted in preparation of diamond grinding wheels. Effective and precise truing/dressing of a diamond wheel is carried out on a CNC curve grinding machine by utilizing an ED assisted diamond dresser. The dressed wheel is monitored online by a CCD vision system. It detects the topography changes of a wheel surface. The wear condition is evaluated by analyzing the edge deviation of a wheel image. The benefits of the proposed methods are confirmed by the grinding experiments. The designed truing/dressing device has high material removal rate, low dresser wear, and hence guarantees a desired wheel surface. Real-time monitoring of the wheel profile facilitates determining the optimum dressing amount, dressing interval, and the compensation error.

Visualized measurement of the electric field in large aperture LiNbO_3 crystal by digital holographic interferometry

The electric field distribution in Li Nb O3 crystal under different electrode shape is presented by using the digital holographic interferometry. Three configurations of phase modulator including the rectangular electrode type,single-triangle electrode type, and dual-triangle electrode type are performed in this experiment. The nonuniform electric field distribution in these phase modulators are observed and the electric field increases with voltage increasing. The digital holographic interferometry with high electro-optic effect improves the measurement precision. The digital holographic interferometry provides an effective way for studying the electric field distribution. Such in situ quantitative analysis of electric field distribution is a key to optimizing electrode shape.

Electric field simulation and measurement of a pulse line ion accelerator

An oil dielectric helical pulse line to demonstrate the principles of a Pulse Line Ion Accelerator （PLIA） has been designed and fabricated. The simulation of the axial electric field of an accelerator with CST code has been completed and the simulation results show complete agreement with the theoretical calculations. To fully understand the real value of the electric field excited from the helical line in PLIA, an optical electric integrated electric field measurement system was adopted. The measurement result shows that the real magnitude of axial electric field is smaller than that calculated, probably due to the actual pitch of the resister column which is much less than that of helix.

Improved Efficiency Test Method for the Motor Controller with SiC MOSFETs

The traditional measurement method was inaccurate to evaluate the motor controller efficiency,which the measurement efficiency value could be more than 100%in practical testing experiments.To deal with this issue,an improved electrical measurement method for the motor controller efficiency is proposed in this paper,which is established by analyzing the power loss distribution and phase currents of the motor controller.It is demonstrated that the SiC MOSFET chips are the main power loss devices in the motor controller,accounting for more than 93.1%of the total power loss.The accuracy of the proposed method is compared with the traditional method in simulation.It shows that the test error of the efficiency obtained by the traditional method fluctuates on a large scale,which varied from 0.094%to 1.911%.Compared with the traditional method,the test error of the proposed method appears to be less than 0.083%,which provides significant guidance for the motor controller efficiency test and design.

Studies on Rare Earth Complexes with Ethylene-1,2-Dioxydiacetic Acid

Some new complexes RE2(EDODA)3&middot3H2O, where RE = La, Nd, Eu, Gd, Tb, Er, Yb, Lu and Y, EDODA = ethylene-1,2-dioxydiacetate, have been synthesized and characterized by elemental analysis, molar conductance, IR spectra, UV spectra, TG-DTA, 1H NMR and 13C NMR spectra. Various analyses indicate that the complexes are of nine-coordinated binuclear structure. The carboxylates are bidentate ligands and the ether oxygen atoms also coordinate to rare earth ions. Three water molecules are crystalline water. In addition, the influence of concentration on the chemical shift has been studied through the 1H NMR spectra of the complex Lu2(EDODA)3&middot3H2O in different concentrations.

Modeling Distortion Signals of Power Grid Based on Wiener-G Functionals

The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load was found based on the Gaussian white noise as input. And then the uniform mathematical model of the power grid signal was established according to the homogeneous of the same order of Wiener functional series. Finally,taking three typical distortion sources which are semiconductor rectifier,electric locomotive and electric arc furnace in power grid as examples,we have validated the model through the Matlab simulation and analyzed the simulation errors. The results show that the uniform mathematical model of distortion signals in power grid can approximation the actual model by growing the items of the series under the condition of the enough storage space and computing speed.

Tectonic activity and earthquake risk in the Chengnanhe fault zone in Weihai city,Shandong province,China,obtained by using an integrated prospecting technique in geophysics and geology

For city planning and reducing potential earthquake risk,it’s necessary to detect the information of the buried faults in an urban area especially,including the location and activities.An integrated technique with geophysical and geological methods,including the shallow seismic reflection profile,electrical resistivity measurement,geologic borehole section,and exploration trench,was used to detect the Chengnanhe fault,which is one of the two main faults passing through the Weihai urban area in Shandong province,China.The results show that it is a normal fault striking with E-W direction,and it is relatively inactive and stable.By using the thermoluminescence(TL)dating,we found that the Chengnanhe fault initiated in mid-Pleistocene and there was no offset after late Pleistocene.Such an integrated technique with multiple geological and geophysical methods provides a significant assessment of earthquake risk for city planning in urban areas.

Internal Stress of Dense Refractory Castables During Unilateral Heating

The change of the internal stress of dense refractory castables during unilateral rapid heating was studied by the electric stress measurement. The results indicate that： （1） during rapid heating, the position near the heated surface is under compressive stress ; the closer the position to the heated surface, the larger the compressive stress; （2） the specimen bursts during the rapid heating; （3） the calculated stress of the structure at the burst moment shows that the compressive stress produced at the same depth as the cracking surface exceeds the ultimate strength of the structure.

Recording Spatially Resolved Plasma Parameters in Microwave-Driven Plasmas

In an almost cubical reactor 90 1 in volume which is intended to deposit organic polymers by plasma-enhanced chemical vapor deposition （PECVD）, microwave power is coupled into the volume via a quartz window which extends to approximately 1/10 of the sidewall area. Since the plasma is excited locally, plasma parameters like electron temperature and plasma density are expected to exhibit a spatial variation. The compilation of these plasma quantities has been accomplished with a bendable single Langmuir probe. To isolate the tungsten wire against its grounded housing tube, it was coated with polyparylene. After having compared this construction with our Langmuir probe, which has been now in use for more than a decade, we have taken data of more than half the volume of the reactor with argon and have found a definitive radial inhomogenity for all plasma parameters. To investigate whether this conduct can be determined applying optical emission spectroscopy, we improved our spectrometer which had been used for endpoint detection purposes and plasma diagnostics in chlorine-containing ambients where we could detect also a spatial dependence. This behavior is discussed in terms of Lieberman＇s global model.