Feasible design for electricity generation from Chlorella vulgaris using convenient photosynthetic conditions

Many recent studies are concerned with low cost,easy to handle and alternative renewable energy as a feasible solution for the upcoming crisis of energy shortage.Microalgae are unicellular entities the can only depend on CO_(2),water and solar power to cover their nutritional needs.The current study is concerned with using algal cells in a polymeric hydrogel,as a cheap source of energy for electricity generation.Chlorella vulgaris has been proved to be a promising algal species for electricity generation,as compared with Micractinium reisseri.PVA hydrogel has been used for the immobilization of both algal species in order to protect them from the adverse surrounding conditions in addition to its ability to slowly release the required water molecules according to needs.Under these conditions,C.vulgaris showed the ability to generate 60 mV compared with 15 mV generated by M.reisseri.Scanning electron micrographs showed nano-threads that bind the C.vulgaris cells to each other,indicating the ability of algae to create nanowires that facilitate the electron transfer among algal cells and from cells to the nearest electrode.However,we would expect an increase in the produced potential with simultaneous amendment of environmentally polluted water,such as sewage or waste water.Both of FTIR and raman spectroscopy proved the presence of the characteristic groups of PVA hydrogel and proved the proper integration of the algal cells inside the hydrogel cavities.

Electricity generation grew steadily

In the first half of 1996, electricity generation in China had steadily, grown with a total electricity generation accumulated to 508.3 TWh, it was 47.5% of the planned figure in the year, and 8.3% higher than the same period of previous year. Among the generation, hydro-electricity amounted to 78.2 TWh, 5.39% lower than previous year, thermal electricity amounted to 424.55 TWh, 10.87% higher than previous year, nuclear electricity amounted to 5.52 TWh, 47.15% higher than previous year. The steady growth of thermal electricity might attribute to newly installed generating capacity in one hand, and the

Towards an Ethical and Ecological Approach to Electricity Generation: A Comparative Analysis of Coal and Nuclear Power in the USA

According to the US Energy Information Administration, about 4118 billion kilowatt-hours (kWh) electricity was generated at large-scale generation facilities in 2019. About 63% of this was from fossil fuels, e.g., coal, natural gas, petroleum, and other gases. Environmental exposure to particulates, sulfur dioxide, nitrogen oxides, mercury, arsenic, radioactive fly ash, and other pollutants are extremely detrimental to the human cardiovascular, respiratory, and nervous systems. Such exposure increases the risk of lung cancer, stroke, heart disease, chronic respiratory diseases, respiratory infections, and other illnesses. In light of the challenges associated with renewables providing large quantities of base load power, as well as other factors, the benefits offered by nuclear power should be reexamined by policy makers to move the country towards a more ecological and ethical method of electric power production. This paper offers a concise analysis of many of the salient issues, comparing electricity generation from coal plants and light water nuclear reactors.

Solar evaporation for simultaneous oil-water separation and electricity generation with Janus wood-based absorbers

Oily wastewater from ocean oil spills endangers marine ecosystems and human health. Therefore, developing an effective and sustainable solution for separating oil-water mixtures is urgent. Interfacial solar photothermal evaporation is a promising approach for the complete separation of two-phase mixtures using only solar energy. Herein, we report a carbonized wood-based absorber with Janus structure of comprising a hydrophobic top-layer and an oleophobic bottom-layer for simultaneous solar-driven oil-water separation and electricity generation. Under sunlight irradiation, the rapid evaporation of seawater will induce a separation of oil-water mixtures, and cause a high salt concentration region underlying the interface, while the bottom “bulk water” maintains in a low salt concentration, thus forming a salinity gradient. Electricity can be generated by salinity gradient power. Therefore, oil-water separation efficiency of > 99% and derived extra electricity power of ~0.1 W/m2 is achieved under solar radiation, demonstrating the feasibility of oil-water separation and electricity production synchronously directly using solar energy. This work provides a green and cost-effective path for the separation of oil-water mixtures.

Combining biological denitrification and electricity generation in methane-powered microbial fuel cells

Methane has been demonstrated to be a feasible substrate for electricity generation in microbial fuel cells(MFCs)and denitrifying anaerobic methane oxidation(DAMO).However,these two processes were evaluated separately in previous studies and it has remained unknown whether methane is able to simultaneously drive these processes.Here we investigated the co-occurrence and performance of these two processes in the anodic chamber of MFCs.The results showed that methane successfully fueled both electrogenesis and denitrification.Importantly,the maximum nitrate removal rate was significantly enhanced from(1.4±0.8)to(18.4±1.2)mg N/(L·day)by an electrogenic process.In the presence of DAMO,the MFCs achieved a maximum voltage of 610 mV and a maximum power density of 143±12 mW/m^(2).Electrochemical analyses demonstrated that some redox substances(e.g.riboflavin)were likely involved in electrogenesis and also in the denitrification process.High-throughput sequencing indicated that the methanogen Methanobacterium,a close relative of Methanobacterium espanolae,catalyzed methane oxidation and cooperated with both exoelectrogens and denitrifiers(e.g.,Azoarcus).This work provides an effective strategy for improving DAMO in methane-powered MFCs,and suggests that methanogens and denitrifiers may jointly be able to provide an alternative to archaeal DAMO for methane-dependent denitrification.

A hybrid fuel cell for water purification and simultaneously electricity generation

The development of highly efficient energy conversion technologies to extract energy from wastewater is urgently needed,especially in facing of increasing energy and environment burdens.Here,we successfully fabricated a novel hybrid fuel cell with BiOCl-NH_(4)PTA as photocatalyst.The polyoxometalate(NH_(4)PTA)act as the acceptor of photoelectrons and could retard the recombination of photogenerated electrons and holes,which lead to superior photocatalytic degradation.By utilizing BiOCl-NH_(4)PTA as photocatalysts and Pt/C air-cathode,we successfully constructed an electron and mass transfer enhanced photocatalytic hybrid fuel cell with flow-through field(F-HFC).In this novel fuel cell,dyes and biomass could be directly degraded and stable power output could be obtained.About 87%of dyes could be degraded in 30 min irradiation and nearly 100%removed within 90 min.The current density could reach up to~267.1μA/cm^(2);with maximum power density(Pmax)of~16.2μW/cm^(2) with Rhodamine B as organic pollutant in F-HFC.The power densities were 9.0μW/cm^(2),12.2μW/cm^(2),and 13.9μW/cm^(2) when using methyl orange(MO),glucose and starch as substrates,respectively.This hybrid fuel cell with BiOCl-NH_(4)PTA composite fulfills the purpose of decontamination of aqueous organic pollutants and synchronous electricity generation.Moreover,the novel design cell with separated photodegradation unit and the electricity generation unit could bring potential practical application in water purification and energy recovery from wastewater.

Intelligent windows for electricity generation: A technologies review

Buildings are responsible for over 40% of total primary energy consumption in the US and EU and therefore improving building energy efficiency has significant potential for obtaining net-zero energy buildings reducing energy consumption. The concurrent demands of environmental comfort and the need to improve energy efficiency for both new and existing buildings have motivated research into finding solutions for the regulation of incoming solar radiation, as well as ensuring occupant thermal and visual comfort whilst generating energy onsite. Windows as building components offer the opportunity of addressing these issues in buildings. Building integration of photovoltaics permits building components such as semi-transparent façade, skylights and shading devices to be replaced with PV. Much progress has been made in photovoltaic material science, where smart window development has evolved in areas such as semi-transparent PV, electrochromic and thermochromic materials, luminescent solar concentrator and the integration of each of the latter technologies to buildings, specifically windows. This paper presents a review on intelligent window technologies that integrate renewable energy technologies with energy-saving strategies contributing potential solutions towards sustainable zero-energy buildings. This review is a comprehensive evaluation of intelligent windows focusing on state-of-the-art development in windows that can generate electricity and their electrical, thermal and optical characteristics. This review provides a summary of current work in intelligent window design for energy generation and gives recommendations for further research opportunities.

Technical Analysis: Generation of Electricity by Pyrolysis of Plastics in a Canadian Environment

The study takes motivation from provincial and national issues regarding waste management and electricity production in Canada.Most sources include previous research relating pyrolysis’applications in different parts of the world.The research included 2-3 weeks of extensive reading of previous research and understanding the theory relating polymers.Research has been conducted to understand why polymers have the properties that they do.Thorough analysis about the chemical reactions relating polymers on a small and large scale is conducted.More research was conducted relating to socio-economic conditions of Canada and Singapore for application purposes.Findings of the research point to an addition the Canadian government can uphold i.e.,build more plastic pyrolysis plants in different regions for waste management.Our findings also suggest that the short term spending on such projects can yield long term benefits.This research is important because it will solve Canada’s non-recyclable waste problems,it will help bring in a new source of electricity and it will help increase the budget of municipalities in the long run.This paper is not just informative on polymers,but also will help readers understand issues regarding Canadian waste management and propose possible solutions.

Promoting and controlling electron transfer of furfural oxidation efficiently harvest electricity,furoic acid,hydrogen gas and hydrogen peroxide

Conventional chemical oxidation of aldehydes such as furfural to corresponding acids by molecular oxygen usually needs high pressure to increase the solubility of oxygen in aqueous phase,while electrochemical oxidation needs input of external electric energy.Herein,we developed a liquid flow fuel cell(LFFC)system to achieve oxidation of furfural in anode for furoic acid production with co-production of hydrogen gas.By controlling the electron transfer in cathode for reduction of oxygen,efficient generation of electricity or production of H_(2)O_(2)were achieved.Metal oxides especially Ag_(2)O have been screened as the efficient catalyst to promote the oxidation of aldehydes,while liquid redox couples were used for promoting the kinetics of oxygen reduction.A novel alkaline-acidic asymmetric design was also used for anolyte and catholyte,respectively,to promote the efficiency of electron transfer.Such an LFFC system achieves efficient conversion of chemical energy of aldehyde oxidation to electric energy and makes full use the transferred electrons for high-value added products without input of external energy.With(VO_(2))_(2)SO_(4)as the electron carrier in catholyte for four-electron reduction of oxygen,the peak output power density(Pmax)at room temperature reached 261 mW/cm^(2)with furoic acid and H_(2)yields of 90%and 0.10 mol/mol furfural,respectively.With anthraquinone-2-sulfonate(AQS)as the cathodic electron carrier,Pmaxof 60 mW/cm^(2)and furoic acid,H_(2)and H_(2)O_(2)yields of 0.88,0.15 and 0.41 mol/mol furfural were achieved,respectively.A new reaction mechanism on furfural oxidation on Ag_(2)O anode was proposed,referring to one-electron and two-electron reaction pathways depending on the fate of adsorbed hydrogen atom transferred from furfural aldehyde group.

Coupling biomass pretreatment for enzymatic hydrolysis and direct biomass-to-electricity conversion with molybdovanadophosphoric heteropolyacids as anode electron transfer carriers

Owing to their acidity,oxidizing ability and redox reversibility,molybdovanadophosphoric heteropolyacids(H_(n+3)PMo_(12-n)VnO40,abbreviated as PMo_(12-n)Vn) were employed as electron transfer carriers for coupling biomass pretreatment for enzymatic hydrolysis and direct biomass-to-electricity conversion.In this novel coupled process,PMo_(12-n)Vn pretreatment that causes deconstruction of cell wall structure with PMo_(12-n)Vn being simultaneously reduced can be considered as the "charging" process.The reduced PMo_(12-n)Vn are further re-oxidized with release of electrons in a liquid flow fuel cell(LFFC) to generate electricity is the "discharging" process.Several Keggin-type PMo_(12-n)Vn with different degree of vanadium substitution(DSV, namely n) were prepared.Compared to Keggin-type phosphomolybdic acid(PMo_(12)),PMo_(12-n)Vn(n=1-6) showed higher oxidizing ability but poorer redox reversibility.The cellulose enzymatic digestibility of PMo_(12-n)Vn pretreated wheat straw generally decreased with increase in DSV, but xylan enzymatic digestibility generally increased with DSV.PMo_(12) pretreatment of wheat straw at 120℃ obtained the highest enzymatic glucan conversion(EGC) reaching 95%,followed by PMo11V1 pretreatment(85%).Discharging of the reduced heteropolyacids in LFFC showed that vanadium substitution could improve the maximum output power density(Pmax).The highest Pmax was obtained by PMo9 V3(44.7 mW/cm^(2)) when FeCl_(3) was used as a cathode electron carrier,while PMo_(12) achieved the lowest Pmax(27.4 mW/cm^(2)).All the heteropolyacids showed good electrode Faraday efficiency(>95%) and cell discharging efficiency(>93%).The energy efficiency of the coupled process based on the heat values of the products and generated electric energy was in the range of 18%-25% depending on DSV.PMo_(12) and PMo11V1 seem to be the most suitable heteropolyacids to mediate the coupled process.

Photon-Assisted Heat Generation by Electric Current in a Quantum Dot Attached to Ferromagnetic Leads

Heat generated by electric current in a quantum dot device contacting a phonon bath is studied using the non- equilibrium Green function technique. Spin-polarized current is generated owing to the Zeeman splitting of the dot level. The current＇s strength and the spin polarization are further manipulated by changing the frequency of an applied photon field and the ferromagnetism on the leads. We find that the associated heat by this spin- polarized current emerges even if the bias voltage is smaller than the phonon energy quanta and obvious negative differential of the heat generation develops when the photon frequency exceeds that of the phonon. It is also found that both the strength and the resonant peaks＇ position of the heat generation can be tuned by changing the value and the arrangement configurations of the magnetic moments of the two leads, and then provides an effective method to generate large spin-polarized current with weak heat. Such a result may be useful in designing low energy consumption spintronic devices.

Optimal Energy Forecasting Using Hybrid Recurrent Neural Networks

The nation deserves to learn what India’s future energy demand will be in order to plan and implement an energy policy.This energy demand will have to be fulfilled by an adequate mix of existing energy sources,considering the con-straints imposed by future economic and social changes in the direction of a more sustainable world.Forecasting energy demand,on the other hand,is a tricky task because it is influenced by numerous micro-variables.As a result,an macro model with only a few factors that may be predicted globally,rather than a detailed ana-lysis for each of these variables,is required.In this work,a hybrid approach is proposed for identifying the optimal generation-based mix of electricity systems in India.This approach is developed by combing Recalling-Enhanced Recurrent Neural Network(RERNN)and Giza Pyramids Construction(GPC).RERNN pos-sesses selective memory features whereas GPC is a meta-heuristic algorithm that deals with different sets of problems.The goal of this approach is to assess the present load requirements and production profile to understand the current requirement and its production methods.Data on regards to electricity load profile involving the generation of all power plants,capacity factors and transmission limits were gathered from different sources including the Indian National Load Dispatch Centre,Central Electricity Authority database,annual reports of India and regional load dispatching centers.The proposal has introduced the RERNN technique to analyze the optimal time series whereas the GPC technique is involved in the optimization of RERNN parameters.The present work is simu-lated in MATLAB and the performance assessed with different parameters.The present technique gives an effective results in terms of accuracy,computational efficiency and feasibility.

Energy Outlook in East Africa Region and the Carbon Emissions for Conventional En-ergy Projection (Part I)

In this investigation, we focus on the current energy sources and future projects situation in East Africa up to 2040. Electricity generation potential of energy mix and electrical capacity will be analyzed. For both electricity generation and electrical capacity, the data source shows that some forms of energies such bio-energy, solar PV, etc. will contribute less as well as with insignificant contribution of nuclear energy. Whereas hydro is dominating comparing with gas, oil, coal, solar PV, bio-energy and other renewables energies. From 2000 up to 2012, hydro and oil were only the one source of electricity generation. Starting from 2020, other forms of energies will appear and continue to increase at different rate. The international trade of electricity in this region will appear in 2020 and continue to increase as predicted by the data. Up to 2040, hydro will play a big role in electricity generation with other renewable energy sources, such as coal, oil, Gas, bio- energy and solar PV that will continue to increase at different rate. The share of solar PV in energy generation will slowly increase compared to other sources. The capacity of hydro and renewable energy sources will be high compared with other sources of energy such as bioenergy, coal, oil, PV solar, and gas. The results show also that bio-energy will increase slowly in electricity generation in comparison with other source of energies. The present report shows that oil will continue to emit a lot carbon dioxide compared to gas and coal. The emission of CO2 from total final consumption (TFC) of oil will continue to be high in comparing with CO2 emission from power generation (PG) of oil. But the emission of carbon dioxide from power generation of coal from 2025 until 2040 will be high compared with emission of CO2 generated from FTC of coal. In this period, the emission from TFC for gas will remain insignificant. The total final consumption emission of oil in general will dominate other emissions from both coal and gas. Due to this high emission of CO2, new technologies should be introduced in order to reduce gas pollution from TFC.

Decomposition analysis of CO_(2) emissions of electricity and carbon-reduction policy implication: a study of a province in China based on the logarithmic mean Divisia index method

As the proportion of electricity in final energy consumption gradually increases,CO_(2) emissions reduction actions in the power system will become the key to achieving China’s carbon-peak and carbon-neutrality goals.It is essential to analyse and quantify the driving forces of CO_(2) emissions from electricity generation in the fossil-rich area in China.This paper aims to identify the characteristics of CO_(2) emissions generated by electricity and provide a basis for formulating CO_(2)-reduction policies in power systems.First,we analyse the current state of CO_(2) emissions from electricity generation in Anhui Province that was dominated by fossil energy during the period 2010-19.Then,we apply the logarithmic mean Divisia index method to find the nature of the factors influencing the changes in CO_(2) emissions.Finally,we analyse the CO_(2)-reduction measures of each side of the source-network-load-storage of the power system in Anhui through a power-system carbon-reduction path analysis model proposed in this study and provide policy suggestions.The results showed the following.(i)CO_(2) emissions in Anhui Province continued to increase from 2010 to 2019 and the trend in the growth rate of CO_(2) emissions presented approximately a u-shaped curve.(ii)Economic activity has always been the dominant factor driving the growth of electricity CO_(2) emis-sions.The increase in the proportion of renewable energy in power generation,the improvement in thermal power-conversion efficiency and the decrease in the intensity of power consumption are the three major driving factors for the reduction in CO_(2) emissions from power generation in Anhui.(iii)The CO_(2)-reduction measures of the power system are provided in each link of the source-network-load-storage,such as developing the photovoltaic industry and building energy storage,upgrading and transforming coal-fired power stations,redu-cing the loss rate of transmission lines on the grid side and improving the efficiency of the utilization of electricity on the user side.

Proposal of a Solar Thermal Power Plant at Low Temperature Using Solar Thermal Collectors

To this day, only two types of solar power plants have been proposed and built: high temperature thermal solar one and photovoltaic one. It is here proposed a new type of solar thermal plant using glass-top flat surface solar collectors, so working at low temperature (i.e., below 100°C). This power plant is aimed at warm countries, i.e., the ones mainly located between -40° and 40° latitude, having available space along their coast. This land based plant, to install on the seashore, is technologically similar to the one used for OTEC (Ocean Thermal Energy Conversion). This plant, apart from supplying electricity with a much better thermodynamic efficiency than OTEC plants, has the main advantage of providing desalinated water for drinking and irrigation. This plant is designed to generate electricity (and desalinated water) night and day and all year round, by means of hot water storage, with just a variation of the power delivered depending on the season.