Electro-optical properties cholesteric liquid of polymer stabilized crystal film＊

Liquid crystals （LCs） and polymers are extensively used in various electro-optical applications. In this paper, normal mode polymer stabilized cholesteric LC film is prepared and studied. The effects of chiral dopant and monomer concentrations on the electro-optical properties, such as contrast ratio, driving voltage, hysteresis width and response time, are investigated. The reasons of electro-optical properties influenced by the concentrations of the materials are discussed. Through the proper material recipe, the electro-optical properties of polymer stabilized cholesteric LC film can be optimized.

Experimental study of electro-optical-switched pulsed Nd:YAG laser

We report the specification of a compact and stable side diode-pumped Q-switched pulsed Nd：YAG laser. We ex- perimentally study and compare the performance of the pulsed Nd：YAG laser in the free-running and Q-switched modes at different pulse repetition rates from 1 Hz to 100 Hz. The laser output energy is stabilized by using a special configu- ration of the optical resonator. In this laser, an unsymmetrical concave-concave resonator is used and this structure helps the mode volume to be nearly fixed when the pulse repetition rate is increased. According to the experimental results in the Q-switched operation, the laser output energy is nearly constant around 70 mJ with an FWHM pulse width of 7 ns at 100 Hz. The optical-to-optical conversion efficiency in the Q-switched regime is 17.5%.

Electro-optical properties of high birefringence liquid crystal compounds with isothiocyanate and naphthyl group

Liquid crystal（LC） compound with isothiocyanate and naphthyl group is an attractive high birefringence LC material,and can be used in optical devices. In this paper, the electro-optical properties of a series of this type of LC compounds were investigated. The melting points and enthalpy values of these LC compounds were higher than those of corresponding compounds with the phenyl group. These compounds exhibited high birefringence with a maximum value of 0.66. Fluorine substitution in the molecular almost does not affect the birefringence value. When these LC compounds with the naphthyl group were dissolved in a commercial LC mixture, the electro-optical properties depending on temperature were investigated. In the low-temperature region, LC mixtures with the naphthyl-group LC compounds exhibited higher viscosity than pure commercial LCs. In the high-temperature region, viscosity values very closely approached each other. When response performance was investigated, figure-of-merit（FoM） values were measured. The Fo M values of LC mixtures containing LC compounds with naphthyl group were lower than those of reference benzene LCs in the low-temperature region. However, in the high-temperature region, the results were reversed. These isothiocyanate LC compounds with naphthyl group can be applied in special fast-response LC device, particularly the ones used under high-temperature conditions.

Electro-Optical Properties of Carbon Nanotubes Obtained by High Density Plasma Chemical Vapor Deposition

In this work, we studied the electro-optical properties of high-aligned carbon nanotubes deposited at room temperature. For this, we used the High Density Plasma Chemical Vapor Deposition system. This system uses a new concept of plasma generation: a planar coil is coupled to an RF system for plasma generation. This was used together with an electrostatic shield, for plasma densification, thereby obtaining high-density plasmas. The carbon nanotubes were deposited using pure methane plasmas. Three methods were used for the surface modification of the sample: reference substrate (silicon wafer only submitted to a chemical cleaning), silicon wafer with surface roughness generated by plasma etching, silicon wafer with a thin iron film and silicon wafer with diamond nano powder used as precursor materials. For each kind of silicon wafer surface, the carbon nanotubes were deposited with two different deposition times (two and three hours). The carbon nanotubes structural characteristics were analyzed by Atomic Force Microscope and Scanning Electronic Microscope. The carbon nanotubes electrical characteristics were observed by Raman Spectroscopy and the carbon nanotubes electro-optical properties were analyzed by current vs voltage electrical measurements and photo-luminescence spectroscopy measurements. The photoelectric effect in the carbon nanotubes were determined by photo-induced current measurements. In this work, we obtained carbon nanotubes with semiconductor properties and carbon nanotubes with metallic properties. The electro-optical effects depend strongly on the substrate preparation and the deposition parameters of the carbon nanotubes. The carbon nanotubes are high aligned and show singular properties that can be used for many applications.

Preparation and Microstructural,Structural,Optical and Electro-Optical Properties of La Doped Pmn-Pt Transparent Ceramics

Transparent relaxor ferroelectric ceramics of the system lanthanum modified lead magnesium niobate have been investigated for a variety of electro-optic properties could make these materials alternatives to (Pb,La)(Zr,Ti)O3. However, a study that relates the properties in function stoichiometric formula, it has not been analyzed heretofore. Therefore, in this work the effect of A-site substitution of La+3 in the characterization microstructural, structural, optical and electro-optical on (1-x)[Pb(1-3/2y)Lay(Mg1/3Nb2/3)O3]-xPbTiO3 and (1-z)[(1-x)Pb(Mg1/3Nb2/3)O3+xPbTiO3]+zLa2O3 has been performed. It was observed that the properties according to the stoichiometric formula and the PT had a maximum whose behavior was related to the addition of lanthanum in each stoichiometries.

Analysis of electro-optical intensity modulator for bunch arrival-time monitor at SXFEL

A bunch arrival-time monitor(BAM) based on an electro-optical intensity modulation scheme is currently under development at Shanghai Soft X-ray Free-Electron Laser to meet the high-resolution requirements for bunch stability. The BAM uses a radio frequency signal generated by a pickup cavity to modulate the reference laser pulses in an electro-optical intensity modulator(EOM), and the bunch arrival-time information is derived from the amplitude change of the laser pulse after laser pulse modulation.EOM is a key optical component in the BAM system.Through the basic principle analysis of BAM, many parameters of the EOM are observed to affect the measurement resolution of the BAM system. Therefore, a systematic analysis of the EOM is crucial. In this paper, we present two schemes to compare and analyze an EOM and provide a reference for selecting a new version of the EOM.

Electro-optical dual modulation on resistive switching behavior in BaTiO3/BiFeO3/TiO2 heterojunction

The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.

Electro-optical properties and(E,F) phase diagram of fluorinated chiral smectic liquid crystals

Fluorinated smectic liquid crystals each with a biphenyl benzoate rigid core are investigated. Molecular structures of the studied compounds have difference only in fluorine position and the length of the carbon chain. Dielectric relaxation study and electro-optical measurements are carried out with the classical SSFLC geometry. The field-induced phase transitions are studied and the（E,T） phase diagram is established.

Design optimization of a hexapod vibration isolation system for electro-optical payload

The electro-optical payloads on mobile platforms generally suffer undesirable vibrations generated by maneuvers and turbulence.These vibrations are in six degrees of freedom and cause line-of-sight jitters,resulting in image blurring and loss of tracking accuracy.In this paper,a Hexapod Vibration Isolation System(HVIS)is proposed and optimized to solve this problem.The optimization aims to centralize and minimize the natural frequencies of HVIS,for expanding the vibration isolation bandwidth and improving the vibration isolation in the higher frequency band.Considering that the design space for HVIS is limited and interfered with the frames of the mobile platform,a non-collision algorithm is proposed and applied in the optimization to obtain the feasible optimal design.The optimization result shows that the natural frequency bandwidth has been reduced by 42.9%,and the maximum natural frequency is reduced by 30.2%.The prototypes of initial and optimal designs are manufactured and tested.Both simulated and experimental results demonstrate the validity of the optimization,and the optimal design provides a maximum of 15 dB more isolation in rotation direction than the initial design.

Small tracking error correction for moving targets of intelligent electro-optical detection systems

Small tracking error correction for electro-optical systems is essential to improve the tracking precision of future mechanical and defense technology.Aerial threats,such as“low,slow,and small(LSS)”moving targets,pose increasing challenges to society.The core goal of this work is to address the issues,such as small tracking error correction and aiming control,of electro-optical detection systems by using mechatronics drive modeling,composite velocity–image stability control,and improved interpolation filter design.A tracking controller delay prediction method for moving targets is proposed based on the Euler transformation model of a two-axis,two-gimbal cantilever beam coaxial configuration.Small tracking error formation is analyzed in detail to reveal the scientific mechanism of composite control between the tracking controller’s feedback and the motor’s velocity–stability loop.An improved segmental interpolation filtering algorithm is established by combining line of sight(LOS)position correction and multivariable typical tracking fault diagnosis.Then,a platform with 2 degrees of freedom is used to test the system.An LSS moving target shooting object with a tracking distance of S=100 m,target board area of A=1 m^(2),and target linear velocity of v=5 m/s is simulated.Results show that the optimal method’s distribution probability of the tracking error in a circle with a radius of 1 mrad is 66.7%,and that of the traditional method is 41.6%.Compared with the LOS shooting accuracy of the traditional method,the LOS shooting accuracy of the optimized method is improved by 37.6%.

Design of a wide-field target detection and tracking system using the segmented planar imaging detector for electro-optical reconnaissance

Detecting and tracking multiple targets simultaneously for space-based surveillance requires multiple cameras,which leads to a large system volume and weight. To address this problem, we propose a wide-field detection and tracking system using the segmented planar imaging detector for electro-optical reconnaissance. This study realizes two operating modes by changing the working paired lenslets and corresponding waveguide arrays： a detection mode and a tracking mode. A model system was simulated and evaluated using the peak signal-to-noise ratio method. The simulation results indicate that the detection and tracking system can realize wide-field detection and narrow-field, multi-target, high-resolution tracking without moving parts.

An investigation on a novel PDLC film's fabrication and its electro-optical properties

A polymer dispersed liquid crystal (PDLC) film that has good electro-optical properties is produced by the method of polymerized-induced phase separation. Based on the application foreground, its capability parameters, such as contrast ratio, work voltage, and visual angle, are characterized for the first time by a white light but not a fixed wavelength light. The results show the PDLC film has a low work-voltage of 20 V, more than 150° visual angle, high stability, and long lifetime. The differences between plastic and glass ITO-coated substrates of PDLC films are also studied in this paper. The plastic substrate has better property and will have a wider perspective especially in the portable, tender and folded display devices. Due to adjustable properties of film by electric field, PDLC has the potential application for display device, sensor, switch, grating, and new generation analytical apparatus.

Electro-optically tunable microdisk laser on Er^(3+)-doped lithium niobate thin film

We report an electro-optically(EO)tunable microdisk laser fabricated on the erbium(Er^(3+))-doped lithium niobate on insulator(LNOI) substrate.By applying a variable voltage on a pair of integrated chromium(Cr) microelectrodes fabricated near the LNOI microdisk,electro-optic modulation with an effective resonance-frequency tuning rate of 2.6 GHz/100 V has been achieved.This gives rise to a tuning range of 45 pm when the electric voltage is varied between-200 V and 200 V.

Facet-dependent electro-optical properties of cholesteric liquid crystals doped with Cu2O nanocrystals

Excellent electro-optical （E-O） performances are essential for high-quality reflective cholesteric liquid crystal （LC） displays, but are often limited by the high driving voltages required by these displays. Dispersing functional nanomaterials into the LCs has emerged as a promising approach to achieve outstanding E-O properties. In this work, we report the facet-controlled E-O properties of a chiral nematic LC （N＊LC） doped with cubic, octahedral, and rhornbic dodecahedral Cu20. The outstanding E-O properties of the doped systems are related to the interaction between the liquid crystals and Cu20 dopants with different exposed crystal planes. Doping with octahedral and rhombic dodecahedral Cu20 reduces the stability of the planar state, as a result of both the surface abundance of active Cu atoms that interact with the polarized LC molecules, and the large amounts of vertexes and edges on the crystal surfaces, which accelerate the transition from the planar to the focal conic state under an applied electric field. Rhombic Cu20 is the most effective dopant for improving the E-O properties of the present LCs, resulting in a 65.31% reduction of the threshold voltage. The facet and morphology effects highlighted in this work provide a new pathway to develop excellent energy-saving meso-materials with exposed high-reactivity facets, improving their potential applications in electro-optical technologies and information displays.

Highly efficient electro-optically Q-switched 473 nm blue laser

An external frequency doubling electro-optically Q-switched neodymium-doped yttrium aluminum garnet (Nd:YAG) 473 nm blue laser was demonstrated. With absorbed pump energy of 48 mJ at 100 Hz repetition rate, about 2 mJ of 473 nm blue laser pulse energy was achieved by cascade frequency doubling. The second harmonic conversion efficiency was 64.5%, and overall optical-optical efficiency was 4.2%, respectively. The blue laser pulse width was less than 10 ns, and beam quality factor was less than 2.4.

Electro-optical sampling non-synchronous delay scanning measurement of electron beam bunch length at BFEL

The Electro-optical sampling delay scanning technique can be used for electron beam bunch length measurement. A novel non-synchronous delay scanning technique based on the electro-optical sampling measurements is presented. Based on Beijing Free Electron Laser （BFEL）, the electron beam bunch length was measured with the electro-optical sampling technique for the first time in China. The result shows that the electron beam bunch length at BFEL is about 5.6±1.2 ps.

Design of low-energy on-chip electro-optical 1 × M wavelength-selective switches

A theoretical design is presented for a 1 × M wavelength-selective switch(WSS) that routes any one of N incoming wavelength signals to any one of M output ports. This planar on-chip device comprises of a 1 × N demultiplexer, a group of N switching "trees" actuated by electro-optical or thermo-optical means, and an M-fold set of N × 1multiplexers. Trees utilize 1 × 2 switches. The WSS insertion loss is proportional to [log_2(M+N +1)]. Along with cross talk from trees, cross talk is present at each cross-illuminated waveguide intersection within the WSS, and there are at most N-1 such crossings per path. These loss and cross talk properties will likely place a practical limit of N=M=16 upon the WSS size. By constraining the 1 × 2 switching energy to^1 f J∕bit, we find that resonant, narrowband 1 × 2 switches are required. The 1 × 2 devices proposed here are nanobeam Mach–Zehnders and asymmetric contra-directional couplers with grating assistance.

Discrete spatial solitons formed in periodically poled lithium niobate by electro-optical effect

We report the numerical observation of discrete spatial solitons in a periodically poled lithium niobate waveguide array by applying an electrical field through electro-optical effect. We show that discrete spatial soliton can be controlled by applied voltage in the periodically poled lithium niobate.

A novel coupled quantum well structure and its excellent electro-optical properties

A novel InGaAs/InAlAs coupled quantum well structure is proposed for large field-induced refractive index change with low absorption loss. In the case of low applied electric field of 15 kV/cm and low absorption loss （α≤100 cm^-1）, a large field-induced refractive index change （for transverse electric （TE） mode, △n= 0.012; for transverse magnetic （TM） mode, △n = 0.0126） is obtained in the structure at the operation wavelength of 1.55 μm. The value is larger by over one order of magnitude than that in a rectangular quantum well. The result is very attractive for semiconductor optical switching devices.

High-quality-factor optical microresonators fabricated on lithium niobate thin film with an electro-optical tuning range spanning over one free spectral range [Invited]

We demonstrate high-quality(intrinsic Q factor∼2.8×106)racetrack microresonators fabricated on lithium niobate thin film with a free spectral range(FSR)of∼86 pm.By integrating microelectrodes alongside the two straight arms of the racetrack resonator,the resonance wavelength around 1550 nm can be red shifted by 92 pm when the electric voltage is raised from−100 V to 100 V.The microresonators with the tuning range spanning over a full FSR are fabricated using photolithography assisted chemo-mechanical etching.