Rill flow velocity affected by the subsurface water flow depth of purple soil in Southwest China

Subsurface water flow above the weakly permeable soil layer commonly occurs on purple soil slopes.However,it remains difficult to quantify the effect of subsurface water flow on the surface flow velocity.Laboratory experiments were performed to measure the rill flow velocity on purple soil slopes containing a subsurface water flow layer with the electrolyte tracer method considering 3 subsurface water flow depths(SWFDs:5,10,and 15 cm),3 flow rates(FRs:2,4,and 8 L min^(-1)),and 4 slope gradients(SGs:5°,10°,15°,and 20°).As a result,the pulse boundary model fit the electrolyte transport processes very well under the different SWFDs.The measured rill flow velocities were 0.202 to 0.610 m s^(-1) under the various SWFDs.Stepwise regression results indicated a positive dependence of the flow velocity on the FR and SG but a negative dependence on the SWFD.The SWFD had notable effects on the rill flow velocity.Decreasing the SWFD from 15 to 5 cm increased the flow velocity.Moreover,the flow velocities under the 10-and 15-cm SWFDs were 89%and 86%,respectively,of that under the 5-cm SWFD.The flow velocity under the 5-,10-and 15-cm SWFDs was decreased to 89%,80%,and 77%,respectively,of that on saturated soil slopes.The results will enhance the understanding of rill flow hydrological processes under SWFD impact.

BRIEF ARTICLE New reduced volume preparation regimen in colon capsule endoscopy

AIM:To evaluate the effectiveness of our proposed bowel preparation method for colon capsule endoscopy.METHODS:A pilot,multicenter,randomized controlled trial compared our proposed "reduced volume method"(group A) with the "conventional volume method"(group B) preparation regimens.Group A did not drink polyethylene glycol electrolyte lavage solution(PEGELS) the day before the capsule procedure,while group B drank 2 L.During the procedure day,groups A and B drank 2 L and 1 L of PEG-ELS,respectively,and swallowed the colon capsule(PillCam COLON capsule).Two hours later the first booster of 100 g magnesium citrate mixed with 900 mL water was administered to both groups,and the second booster was administered six hours post capsule ingestion as long as the capsule had not been excreted by that time.Capsule videos were reviewed for grading of cleansing level,RESULTS:Sixty-four subjects were enrolled,with results from 60 analyzed.Groups A and B included 31 and 29 subjects,respectively.Twenty-nine(94%) subjects in group A and 25(86%) subjects in group B had adequate bowel preparation(ns).Twenty-two(71%) of the 31 subjects in group A excreted the capsule within its battery life compared to 16(55%) of the 29 subjects in group B(ns).Of the remaining 22 subjects whose capsules were not excreted within the battery life,all of the capsules reached the left side colon before they stopped functioning.A single adverse event was reported in one subject who had mild symptoms of nausea and vomiting one hour after starting to drink PEG-ELS,due to ingesting the PEG-ELS faster than recommended.CONCLUSION:Our proposed reduced volume bowel preparation method for colon capsule without PEG-ELS during the days before the procedure was as effective as the conventional volume method.

Preparation and characterization of Ce_(0.8)La_(0.2–x)Y_xO_(1.9) as electrolyte for solid oxide fuel cells

In this study, ultrafine Ce0.8La0.2–x Y x O1.9（for x=0, 0.05, 0.10, 0.15, 0.20） powders were successfully prepared by the sol-gel method.The samples were characterized by fourier transform infrared（FTIR）, thermogravimetric and differential scanning calorimetry（TG-DSC）, X-ray diffraction（XRD）, scanning electron microscopy（SEM）, AC impedance and thermal expansion measurements.Experimental results indicated that highly phase-pure cubic fluorite electrolyte Ce0.8La0.2–x Y x O1.9 powders were obtained after calcining at 600 °C.The as-synthesized powders exhibited high sintering activity, the Ce0.8La0.2–x Y x O1.9 series electrolytes which have higher relative densities over 96% could be obtained after sintered at 1400 °C for 4 h.Ce0.8La0.15Y0.05O1.9 electrolyte sintered at 1400 °C for 4 h exhibited higher oxide ionic conductivity（σ800 oC=0.057 S/cm）, lower electrical activation energy（E a=0.87 e V） and moderate thermal expansion coefficient（TEC=15.5×10-6 K-1, temperature range 25–800 °C）.