Distributed wide field electromagnetic method based on high-order 2^(n) sequence pseudo random signal

To make three-dimensional electromagnetic exploration achievable,the distributed wide field electromagnetic method(WFEM)based on the high-order 2^(n) sequence pseudo-random signal is proposed and realized.In this method,only one set of high-order pseudo-random waveforms,which contains all target frequencies,is needed.Based on high-order sequence pseudo-random signal construction algorithm,the waveform can be customized according to different exploration tasks.And the receivers are independent with each other and dynamically adjust the acquisition parameters according to different requirements.A field test in the deep iron ore of Qihe−Yucheng showed that the distributed WFEM based on high-order pseudo-random signal realizes the high-efficiency acquisition of massive electromagnetic data in quite a short time.Compared with traditional controlled-source electromagnetic methods,the distributed WFEM is much more efficient.Distributed WFEM can be applied to the large scale and high-resolution exploration for deep resources and minerals.

Electric-magnetic-force characteristics of rare earth barium copper oxide superconductor high-field coils based on screening effect and strain sensitivity

Rare earth barium copper oxide(REBCO)is the most researched and commercialized second-generation high-temperature superconducting material.Due to the anisotropic structure,strong deformation sensitivity,and central field errors caused by screening current effects,it is still a challenge for commercialization applications.In this study,the transversely isotropic constitutive relationship is selected as the mechanical model based on the structural characteristics of REBCO tapes,and suitable microelements are selected to equate the elastic constants using their average stress-strain relationships.Then,a two-dimensional axisymmetric model for coils wound by single-layer tapes is constructed to analyze the dependence of the electric-magnetic-force distribution in the tape on the strain.Finally,the anisotropic approximation of the homogenized bulk method is used to equate large-turn high-field coils,and the electric-magnetic-force distribution characteristics of the coils with/without screening effects and mechanical strain conditions are investigated,respectively.The results reveal that the mechanical strain has a weakening effect on the electromagnetic field distribution of superconducting tapes,but causes a significant enhancement in the force field distribution.In the presence of 0.5% mechanical strain,the maximum weakening of the peak value of the current density and the critical current density inside the high-field coil can reach about 8% and 13%,respectively,with a nearly 5 times increase in the peak stress.The screening current makes the current field distribution inside the coil improve by about 10 times.The screening current induced magnetic field can reach up to 0.8 T,making the relative error of the high-field coil center up to 7.8%.

Research on a Folded Blumlein Line Using Kapton Film as Dielectrics

In this project, a Blumlein line with a folded parallel-plates configuration using Kapton film as dielectrics was investigated. The characteristic parameters of this Blumlein line were analysed theoretically. The electric field distributions under different inner radii of the folded part were simulated. The output waveforms on the match load were also simulated by means of an equivalent electric circuit. According to the results of the theoretecal analysis and simulation, a Blumlein line with the folded parallel-plates configuration with an output voltage of 500 kV, a pulse duration of 100 ns, and a characteristic impedance of 4.773Ω was designed and manufactured. The experimental results properly demonstrated the wave transmitting process in the Blumlein line, and provided the voltage waveform of 500 kV and the current waveform of 50 kA with a pulse duration of 150 ns. Some engineering problems such as the edge electric breakdown and measuring precision by a resistance divider were revealed, which must be solved in future work to produce a more compact transmission line.