Influence of a UV-ozone treatment on amorphous SnO_(2) electron selective layers for highly efficient planar MAPbI3 perovskite solar cells

The effect of ultraviolet-ozone(UVO)irradiation on amorphous(am)SnO_(2) and its impact on the photoconversion efficiency of MAPbI3-based perovskite solar cells were investigated in detail.UVO treatment was found to increase the amount of chemisorbed oxygen on the am-SnO_(2) surface,reducing the surface energy and contact angle.Physicochemical changes in the am-SnO_(2) surface lowered the Gibbs free energy for the densification of perovskite films and facilitated the formation of homogeneous perovskite grains.In addition,the Fermi energy of the UVO-treated am-SnO_(2) shifted upwards to achieve an ideal band offset for MAPbI3,which was verified by theoretical calculations based on the density functional theory.We achieved a champion efficiency of 19.01% with a statistical reproducibility of 17.01±1.34% owing to improved perovskite film densification and enhanced charge transport/extraction,which is considerably higher than the 13.78±2.15% of the counterpart.Furthermore,UVO-treated,am-SnO_(2)-based devices showed improved stability and less hysteresis,which is encouraging for the future application of up-scaled perovskite solar cells.

Tin oxide(SnO_2) as effective electron selective layer material in hybrid organic–inorganic metal halide perovskite solar cells

The emergence of hybrid organic-inorganic metal halide perovskite solar cells （PSCs） causes a break through in the solar technology recently due to its fabrication processes. The dramatic enhancenlent in in 2009 to the recent certified record PCE of 22.7% superior optoelectronic properties and the low-cost power conversion efficiency （PCE） of PSCs flom 3.8% ndicates huge potential of PSCs for future high efficiency and large scale photovoltaic manufacturing. The electron selective layer （ESL） plays an important role in electron extraction and hole blocking function in PSCs, and there have been great interest in developing efficient ESL materials. Recently, tin oxide （SnO2） as an ESL has attracted significant research attentions owing to its low temperature preparation processes as well as yielding high PCE and good stability of PSCs. In this perspective article, we focus on the development progress of SnO2 as an ESL m PSCs, and discuss the strategies for preparing SnO2 to achieve PSCs with high efficiency, less hysteresis and good device stability.

Aqueous Sn-S Complex Derived Electron Selective Layer for Perovskite Solar Cells

A novel aqueous Sn-S complex solution was applied as precursor to fabricate SnO2 electron selective layers (ESLs) for the hybrid perovskite solar cells (PSCs).The tin and sulfur powder were directly dissolved in a (NH4)2S water solution to form Sn-S precursor.After depositon and annealing,the SnO2 film was formed,presenting as a low cost and enviromental friendly method for preparation of ESL.The films showed excellent transmittance at visible wavelength range.Moreover,the method exhibited high compatibility for doping using Cu,Cd,Li,and Zn elements.Zn doping (0.05 M) in the as-prepared SnO2 ESL significantly improved perovskite solar cells (PSCs) performance.The highest PCE of 13.17% was achived with 15% enhancement compared to that of undoped SnO2 ESL samples.TiCl4 modifications on SnO2 film improved photovoltaic performance to 14.45%,but resulted in the poor long-term stability,around 80% more degredation than that of PSCs based on Zn-doped SnO2 films.