Controllable Fabrication of Spider-Web-Like Structured Anaphe Panda Regenerated Silk Nanofibers / Nets via Electrospinning / Netting

An Anaphe panda silk nanofibers / nets( NFN) membrane with attractive structures consisting of common electrospun nanofibers and two-dimensional( 2D) spider-web-like structured nano-nets were successfully fabricated via electrospinning / netting technology. The unique structures of NFN membranes such as extremely small diameter( < 20 nm),high porosity,large specific surface area. and biocompatibility make this Anaphe panda silk NFN membrane a promising candidate for biomedical applications. In the present study, field emission scanning electron microscopy( FESEM) was used to investigate the influence of polymer solution and humidity on nano-nets coverage and morphology. The FE-SEM images revealed that nano-net coverage area increased with increase in concentration of solution while lowering the humidity increased the nano-nets formation. Moreover,the mechanical properties of the membrane were also tested and the result showed that the silk NFN membrane displayed a breaking stress of 3. 7 MPa and breaking strain of 13. 8%. For further structural elucidation, Fourier transform infrared spectroscopy( FT-IR) was used to analyze the structural conformation changes from random coil to β-sheet in the NFN membrane which was an important factor effecting the usability of membrane. Thus,the results above confirmed the feasibility of Anaphe panda NFN structures applicability in cell tissue culture and other biomedical applications.

Structure Changes of Silk Fibroin(SF) by Blending with Poly(ε-caprolactone)(PCL):Characterization of SF and PCL Blended Electrospinning Films

The mechanical properties and water solubility of electrospinning SF films limit their use as biomaterials. In order to develop a tissue engineering biomaterial with both satisfying biological properties and sufficient biomechanical properties,blended films composed of silk fibroin( SF) and poly( ε-caprolactone)( PCL) were fabricated by electrospinning in this study. Scanning electron microscope( SEM), X-ray diffraction( XRD),thermal analysis,Fourier transform-infrared( FT-IR),Raman spectra,mechanical testing,and water solubility were used to characterize the morphological, structural and mechanical properties of the blended electrospinning films. Results showed that the diameter of the blended fiber was distributed between 600 and1000 nm,and the fiber diameter increased as the PCL content increased. There is no obvious phase separation due to the similarity and intermiscibility,as well as the interactions( mainly hydrogen bonds), between the two polymers. Meanwhile, the secondary structures of SF changed from random coils and Silk I to Silk II because of the interactions between SF and PCL. For this reason,the tensile strength and elongation at break of the electrospinning films improved significantly,and the water solubility decreased. In conclusion,the blended electrospinning films fabricated in this study showed satisfying mechanical properties and water insolubilities,and they may be promising biomaterials for applications in tissue engineering for blood vessels,nerve conduits,tendons,ligaments and other tissues.

Fabrication of Ethosome-Loaded Silk Fibroin/Polyethylene Oxide Nanofibrous Mats by Green Electrospinning

Ethosomes are permeation-enhancing carriers, which significantly promote drug delivery into skin. Thus,the introduction of ethosomes into electrospun nanofibers may result in good effect on transdermal drug delivery. In this work,a novel ethosome-loaded silk fibroin( SF) /polyethylene oxide( PEO) composite nanofiber was fabricated based on a green electrospinning process. The ethosome-loaded SF /PEO nanofiber was round and smooth as shown by scanning electron microscopy( SEM),and the incorporation of ethosome didn't significantly affect the morphology of the electrospun SF /PEO nanofiber. The data of Fourier transform infrares(FTIR)spectra suggested the existence of ethosome on the SF /PEO nanofiber and the transmission electron microscopy(TEM) clearly showed the distribution of ethosome on the ethosome-loaded SF nanofibers. This ethosome-loaded SF nanofibrous mat may have a promising application in transdermal drug delivery systems.

Study on Electrospinning Silk Fibroin Solution

A new method of preparing silk fibroin （SF） solution used in the decterospinning was introduced in this paper. According to the method, SF was dissolved in the LiBr/CH2O2 solution directly at room temperature. The method was compared with the traditional method--SF was dissolved in CaCl2 ternary solution. The structure of SF films and the morphology of SF nanofibers were examined by attenuated total reflectance fourier transform intrared （ATR- FTIR） spectroscopy, Scanning electron microscope （SEM） and optical polarizing microscope. The result of this study shows that the new method is a faster, more convenient and high cfficieat way to get the SF solution and the characteristics of SF fiber made by the new metbod is much better.

A Brief Discussion on the Development of the Silk-Weaving Industry Along the “Southern Silk Road” in Yunnan

Ancient Yunnan was one of the most significant regions along China’s ancient“Southern Silk Road.”During the Nanzhao period(738–902)of the late Tang Dynasty,Yunnan’s silk-weaving industry underwent a qualitative leap as skilled silk craftsmen from the Bashu area migrated to Yunnan and introduced mulberry planting,silkworm breeding,and advanced silk-weaving techniques from Sichuan to the region.Consequently,people in Yunnan gradually acquired expertise in brocade weaving and embroidery.Many even mastered complex silk-weaving techniques.The development and progress of the silk-weaving industry in the ancient Yunnan region were intricately linked to the economic function and value of silk as both a commodity and currency along the“Southern Silk Road.”The local government in ancient Yunnan was greatly motivated by the economic interests brought by the development of silk-related industries and recognized the significance of developing the local silk industry.They even initiated a campaign to capture skilled silk craftsmen from Sichuan,aiming to foster the growth of the silk-weaving industry in Yunnan.After years of dedicated efforts from the local government in ancient Yunnan,the region emerged as a significant hub for silk production along China’s ancient“Southern Silk Road.”Despite the devastation caused by the wars in other parts of the country,Yunnan’s silk industry continued to thrive and provide ample silk products to sustain trade along this renowned route.In the contemporary era,amidst the decline of the silk-weaving industry in eastern China,Yunnan has proposed an industrial development strategy known as“relocating the silk-weaving industry from east to west.”This involves introducing advanced silk production techniques from the eastern regions into Yunnan to enhance and enrich its local silk industry,thereby establishing it as a traditional national sector and securing a competitive position within the global silk market.The historical experience of Yunnan’s silk industry demonstrated that economic development opportunities can only be seized through proactive endeavors rather than passive anticipation.The modern Yunnan silk industry,which upholds its historical traditions,continues to actively engage in international high-end technical cooperation,thus ensuring the enduring vitality of the ancient“Southern Silk Road.”

The coordinated evolution of ecological environment,public service,and tourism economy along the Silk Road Economic Belt,using the Dual-Carbon Targets

Carbon peak and carbon neutrality(dual-carbon)are important targets for the international response to climate change.The Silk Road Economic Belt is a strategic resource region and is important for future ecological environment and tourism development.Based on the“dual-carbon”targets,the Single index quantification,Multiple index synthesis,and Poly-criteria integration evaluation model were used in this study to measure the coordinated development index of the ecological environment,public service,and tourism economy along the Silk Road Economic Belt and to analyze its spatial and temporal evolution.Further,it explores the dynamic evolution and development trend of the three systems using the Kernel Density and Grey Markov Prediction Model.The results show that the coordinated development index along this region needs to be improved during the study period.Furthermore,the coordinated development index of the Southwest region is relatively higher than that of the Northwest region.From the development trend of the three systems,all of them develop in a stable manner;however,the tourism economy system is easily affected by external disturbances.The coordinated development index of the three systems changes dynamically and tends to be in a good state of coordination.There is a certain spatial and temporal heterogeneity.The gravity center of the coordinated development index has been in the Southwest region.During the forecast period,the coordinated development index along this region will improve significantly,while insufficient and unbalanced development will continue.

Preparation of alkaline-responsive nano-electrospinning and anticorrosion properties of self-healing coating

In this paper,1-butyl-3-methylimidazole tetrafluoroborate([BMIM]BF4)is used as corrosion inhibitor.Polyacrylonitrile(PAN)is used to load the corrosion inhibitor.PAN/[BMIM]BF4 hybrid nanofibers are successfullysynthesized by electrospinning technology.The alkyd varnish is coated on the fiber membrane to prepare a compositecoating,and then a series of tests are carried out on the self-healing and anticorrosive performance of the compositecoating.It is observed by scanning electron microscope that the fiber morphology is stable and there is no bead-likestructure.The composition of the composite fiber is analyzed by Fourier infrared spectroscopy,and it is confirmed thatthe hybrid nanofiber was successfully prepared.3D laser confocal scanning microscope was used to observe thecorrosion morphology and profile of the carbon steel.The composite coating shows good self-healing performance.[BMIM]BF4 can form a protective film on the surface of the bare carbon steel substrate through physical adsorption orchemical adsorption in an alkaline environment.Electrochemical impedance spectroscopy was tested and analyzed.It isfound that the maximum corrosion inhibition efficiency of the coating is 88.5%in 3.5 wt.%alkaline NaCl solution.Compared with the blank coating without nanofibers,the composite fiber varnish composite coating exhibits good selfhealingand anti-corrosion properties.

Research on the Development of Fibroin and Nano-Fiber from Silk Cocoons for Regenerated Tissue Engineering Applications by Electro-Spinning

In this paper, the main goal is to prepare silk fibroin nano-fiber, which is used for regenerated tissue applications. Silk scaffold nano-fibers made by electro-spinning technology can be used in regenerated tissue applications. The purpose of the research is to prepare a silk-fibroin nano-fiber solution for potential applications in tissue engineering. Using a degumming process, pure silk fibroin protein is extracted from silk cocoons. The protein solution for fibroin is purified, and the protein content is determined. The precise chemical composition, exact temperature, time, voltage, distance, ratio, and humidity all have a huge impact on degumming, solubility, and electro-spinning nano-fibers. The SEM investigates the morphology of silk fibroin nano-fibres at different magnifications. It also reveals the surface condition, fiber orientation, and fiber thickness of the silk fibroin nano-fiber. The results show that regenerated silk fibroin and nano-fiber can be used in silk fibroin scaffolds for various tissue engineering applications.

Piezoelectric fibers based on silk fibroin with excellent output performance

The self-powered tissue engineering scaffold with good biocompatibility is of great significance for stimulating nerve cell growth.In this study,silk fibroin(SF)-based fibers with regulatable structure and piezoelectric performance are fabricated by dry-spinning and post-treatment.The concentration of SF and calcium ion in spinning dope and the post-treatment affect the conformation transition and crystallinity of SF.As a result,the SF fibers exhibit high piezoelectric coefficient d_(33)(3.24 pm/V)and output voltage(~27 V).Furthermore,these piezoelectric fibers promote the growth of PC-12 cells,demonstrating the promising potential for nerve repair and other energy harvester.

Wearable flexible zinc-ion batteries based on electrospinning technology

Flexible wearable batteries are widely used in smartwatches, foldable phones, and fitness trackers due to their thinness and small size. Zinc-based batteries have the advantages of low cost, high safety, and ecofriendliness, which are considered to be the best alternative to flexible lithium-ion batteries(LIBs).Therefore, wearable flexible zinc-ion batteries(FZIBs) have attracted considerable interest as a promising energy storage device. Electrospun nanofibers(ESNFs) have great potential for application in wearable FZIBs due to their low density, high porosity, large specific surface area, and flexibility. Moreover, electrospinning technology can achieve the versatility of nanofibers through structural design and incorporation of other multifunctional materials. This paper reviews a wide range of applications of electrospinning in FZIBs, mainly in terms of cathode, anode, separator, polymer electrolyte, and all-inone flexible batteries. Firstly, the electrospinning device, principles, and influencing parameters are briefly described, showing its positive impact on FZIBs. Subsequently, the energy storage principles and electrode configurations of FZIBs are described, and some of the common problems of the batteries are illustrated, including zinc anode dendrite growth, corrosion, cathode structure collapse, and poor electrical conductivity. This is followed by a comprehensive overview of research progress on the individual components of FZIBs(cathode, anode, separator, and polymer electrolyte) from the perspective of electrostatically spun fiber materials and an in-depth study of all-in-one flexible batteries. Finally, the challenges and future development of FZIBs are individually concluded and look forward. We hope that this work will provide new ideas and avenues for the development of advanced energy technologies and smart wearable systems.

A Review on Silk Fibroin as a Biomaterial in Tissue Engineering

Regenerative medicine progress is based on the development of cell and tissue bioengineering. One of the aims of tissue engineering is the development of scaffolds, which should substitute the functions of the replaced organ after their implantation into the body. The tissue engineering material must meet a range of requirements, including biocompatibility, mechanical strength, and elasticity. Furthermore, the materials have to be attractive for cell growth: stimulate cell adhesion, migration, proliferation and differentiation. One of the natural biomaterials is silk and its component (silk fibroin). An increasing number of scientists in the world are studying silk and silk fibroin. The purpose of this review article is to provide information about the properties of natural silk (silk fibroin), as well as its manufacture and clinical application of each configuration of silk fibroin in medicine. Materials and research methods. Actual publications of foreign authors on resources PubMed, Medline, E-library have been analyzed. The selection criteria were materials containing information about the structure and components of silk, methods of its production in nature. This article placed strong emphasis on silk fibroin, the ways of artificial modification of it for use in various sphere of medicine.

Structural analysis of silk using solid-state NMR

Silkworms and spiders are capable of generating fibers that are both highly durable and elastic in a short span of time,using a silk solution stored within their bodies at room temperature and normal atmospheric pressure.The dragline silk fiber,which is essentially a spider's lifeline,surpasses the strength of a steel wire of equivalent thickness.Regrettably,humans have yet to replicate this process to produce fibers with similar high strength and elasticity in an eco-friendly manner.Therefore,it is of utmost importance to thoroughly comprehend the extraordinary structure and fibrillation mechanism of silk,and leverage this understanding in the manufacturing of high-strength,high-elasticity fibers.This review will delve into the recent progress in comprehending the structure of silks derived from silkworms and spiders,emphasizing the distinctive attributes of solidstate NMR.

Application of different fiber structures and arrangements by electrospinning in triboelectric nanogenerators

In recent years,nanogenerators(NGs)have attracted wide attention in the energy field,among which triboelectric nanogenerators(TENGs)have shown superior performance.Multiple reports of electrospinning(ES)-based TENGs have been reported,but there is a lack of deep analysis of the designing method from microstructure,limiting the creative of new ES-based TENGs.Most TENGs use polymer materials to achieve corresponding design,which requires structural design of polymer materials.The existing polymer molding design methods include macroscopic molding methods,such as injection,compression,extrusion,calendering,etc.,combined with liquid-solid changes such as soluting and melting;it also includes micro-nano molding technology,such as melt-blown method,coagulation bath method,ES method,and nanoimprint method.In fact,ES technology has good controllability of thickness dimension and rich means of nanoscale structure regulation.At present,these characteristics have not been reviewed.Therefore,in this paper,we combine recent reports with some microstructure regulation functions of ES to establish a more general TENGs design method.Based on the rich microstructure research results in the field of ES,much more new types of TENGs can be designed in the future.

Flexible coal-derived carbon fibers via electrospinning for self-standing lithium-ion battery anodes

A series of flexible and self-standing coal-derived carbon fibers(CCFs)were fabricated through electro-spinning coupled with carbonization using bituminous coal and polyacrylonitrile(PAN)as the carbon precursors.These CCFs were utilized as free-standing lithium-ion battery(LIB)anodes.Optimizing car-bonization temperature reveals that the CCFs exhibit a one-dimensional solid linear structure with a uni-form distribution of graphite-like microcrystals.These fibers possess a dense structure and smooth surface,with averaging diameter from approximately 125.0 to 210.0 nm at carbonization temperatures ranging from 600 to 900℃.During electrospinning and carbonization,the aromatic rings enriched in bituminous coal crosslink with PAN chains,forming a robust three-dimensional(3D)framework.This 3D microstructure significantly enhances the flexibility and tensile strength of CCFs,while increasing the graphite-like sp^(2)microcrystalline carbon content,thus improving electrical conductivity.The CCFs carbonized at 700℃demonstrate an optimal balance of sp^(3)amorphous and sp^(2)graphite-like carbons.The average diameter of CCFs-700 is 177 nm and the specific surface area(SSA)is 7.2 m^(2)g^(-1).Additionally,the fibers contain oxygen-containing functional groups,as well as nitrogen-containing func-tional groups,including pyridinic nitrogen and pyrrolic nitrogen.Owing to its characteristics,the CCFs-700 showcases remarkable electrochemical performance,delivering a high reversible capacity of 631.4 mAh g^(-1).CCFs-700 also exhibit outstanding cycle stability,which retains approximately all of their first capacity(400.1 mAh g^(-1))after 120 cycles.This research offers an economical yet scalable approach for producing flexible and self-supporting anodes for LIBs that do not require current collectors,binders and conductive additives,thereby simplifying the electrode fabrication process.

Electrospinning/3D printing-integrated porous scaffold guides oral tissue regeneration in beagles

The combined use of guided tissue/bone regeneration(GTR/GBR)membranes and bone filling grafts represents a classical therapy for guiding the regeneration and functional reconstruction of oral soft and hard tissues.Nevertheless,due to its displacement and poor mechanical support,bone meal is not suitable for implantation in the case of insufficient cortical bone support and large dimensional defects.The combination of GTR/GBR membrane with a three-dimensional(3D)porous scaffold may offer a resolution for the repair and functional reconstruction of large soft and hard tissue defects.In this study,a novel integrated gradient biodegradable porous scaffold was prepared by bonding a poly(lactic-co-glycolic acid)(PLGA)/fish collagen(FC)electrospun membrane(PFC)to a 3D-printed PLGA/nano-hydroxyapatite(HA)(PHA)scaffold.The consistency of the composition(PLGA)ensured strong interfacial bonding between the upper fibrous membrane and the lower 3D scaffold.In vitro cell experiments showed that the PFC membrane(upper layer)effectively prevented the unwanted migration of L929 cells.Further in vivo investigations with an oral soft and hard tissue defect model in beagles revealed that the integrated scaffold effectively guided the regeneration of defective oral tissues.These results suggest that the designed integrated scaffold has great potential for guiding the regeneration and reconstruction of large oral soft and hard tissues.

Three-dimensional thermohaline structure estimation derived from HY-2 satellite data over the Maritime Silk Road and its applications

Estimated ocean subsurface fields derived from satellite observations provide potential data sources for operational marine environmental monitoring and prediction systems.This study employs a statistic regression reconstruction method,in combination with domestic autonomous sea surface height and sea surface temperature observations from the Haiyang-2(HY-2)satellite fusion data,to establish an operational quasi-realtime three-dimensional(3D)temperature and salinity products over the Maritime Silk Road.These products feature a daily temporal resolution and a spatial resolution of 0.25°×0.25°and exhibit stability and continuity.We have demonstrated the accuracy of the reconstructed thermohaline fields in capturing the 3D thermohaline variations through comprehensive statistical evaluations,after comparing them against Argo observations and ocean analysis data from 2022.The results illustrate that the reconstructed fields effectively represent seasonal variations in oceanic subsurface structures,along with structural changes resulting from mesoscale processes,and the upper ocean’s responses to tropical cyclones.Furthermore,the incorporation of HY-2 satellite observations notably enhances the accuracy of temperature and salinity reconstructions in the Northwest Pacific Ocean and marginally improves salinity reconstruction accuracy in the North Indian Ocean when compared to the World Ocean Atlas 2018 monthly climatology thermohaline fields.As a result,the reconstructed product holds promise for providing quasi-real-time 3D temperature and salinity field information to facilitate fast decisionmaking during emergencies,and also offers foundational thermohaline fields for operational ocean reanalysis and forecasting systems.These contributions enhance the safety and stability of ocean subsurface activities and navigation.

Matching Dyeing and Properties of Silk Fabrics with Natural Edible Pigments

The silk fabrics were matching dyed with three natural edible pigments(red rice red,ginger yellow and gardenia blue).By investigating the dyeing rates and lifting properties of these pigments,it was observed that their compatibilities were excellent in the dyeing process:dye dosage 2.5%(omf),mordant alum dosage 2.0%(omf),dyeing temperature 80℃and dyeing time 40 min.The silk fabrics dyed with secondary colors exhibited vibrant and vivid color owing to the remarkable lightness and chroma of ginger yellow.However,gardenia blue exhibited multiple absorption peaks in the visible light range,resulting in significantly lower lightness and chroma for the silk fabrics dyed with tertiary colors,thus making it suitable only for matte-colored fabrics with low chroma levels.In addition,the silk fabrics dyed with these three pigments had a color fastness that exceeded grade 3 in resistance to perspiration,soap washing and light exposure,indicating acceptable wearing properties.The dyeing process described in this research exhibited a wide range of potential applications in matching dyeing of protein-based textiles with natural colorants.

Preparation of Regenerated Silk Fibroin Hybrid Fibers with Hydrogen Peroxide Sensing Properties by Wet Spinning

Silk is widely used in the production of high-quality textiles.At the same time,the amount of silk textiles no longer in use and discarded is increasing,resulting in significant waste and pollution.This issue is of great concern in many countries where silk is used.Hydrogen peroxide as a naturally occurring compound is an important indicator of detection in both biology and the environment.This study aims to develop a composite fiber with hydrogen peroxide-sensing properties using discarded silk materials.To achieve this goal,firstly,polydopamine(PDA)was used to encapsulate the ZnFe_(2)O_(4) NPs to achieve the improvement of dispersion,and then regenerated silk fibroin(RSF)and PDA@ZnFe_(2)O_(4)/RSF hybrid fibers are prepared by wet spinning.Research has shown that PDA@ZnFe_(2)O_(4)/RSF demonstrates exceptional sensitivity,selectivity,and stability in detecting hydrogen peroxide,while maintaining high mechanical strength.Furthermore,the complete hybridization of PDA@ZnFe_(2)O_(4) with silk fibroin not only results in the combination of the durability of silk fibroin and PDA@ZnFe_(2)O_(4)’s rigidity,ensuring a reliable service life,but also makes PDA@ZnFe_(2)O_(4)/RSF exhibit excellent catalytic activity and biocompatibility.Therefore,the composite fiber exhibits exceptional mechanical properties and reliable hydrogen peroxide sensing capabilities,making it a promising material for biological and medical applications.

Jili Silk

JILI silk is a type of silk produced in Jili Village,Nanxun Town,Nanxun District,Huzhou City in east China’s Zhejiang Province.Jili Village has been producing silk since the village was established in the late Yuan Dynasty(1271-1368).Jili silk is characterized by being stretchy,soft and fine with an even thickness and shiny white color.With these features,Jili silk is widely recognized in China and across the world.

Synergistic effects of three traditional herbs green tea,mulberry leaf and corn silk on glucose uptake level of L6 myoblasts and the hypoglycemic mechanism

Background:Green tea,mulberry leaf and corn silk are traditional herbs used in the prevention and treatment of diabetes in China for a long time,but their synergistic hypoglycemic effects and mechanisms remain unclear.Methods:The effective components of green tea,mulberry leaf and corn silk were extracted and enriched.Mixture design of experiments was used to study the influences of different combinations on the cell viability and glucose uptake level of L6 myoblasts,so as to determine the optimal synergistic hypoglycemic combination.The possible hypoglycemic mechanism of the optimal synergistic combination was explored by cytotoxicity assay,glucose uptake assay,and western blot.Results:Three polyphenol enrichment fractions of the herbs,30%ethanol elution fraction of green tea(GT),50%ethanol elution fraction of mulberry leaf(ML)and 60%ethanol elution fraction of corn silk(CS)were obtained.The antioxidant activities of GT-30%,ML-50%and CS-60%were superior to those of crude extracts,and showed strong potential inα-amylase andα-glucosidase inhibition activities.The optimal synergistic combination of crude extracts G7(crude extract of green tea:crude extract of mulberry leaf:crude extract of corn silk=1:5:3),polyphenol enrichment fractions R3(GT-30%:ML-50%:CS-60%=1:7:1)and monomers X2(epigallocatechin gallate:morusin:formononetin=3:1:2)were selected,respectively.G7,R3,and X2 showed promoting effects on the cell viability and glucose uptake of L6 myoblasts within the detected concentration range.In addition,G7,R3,and X2 could increase the expression levels of p-PI3K/PI3K and p-Akt/Akt in L6 myoblasts,and promote the translocation of Glut4,but G7 and R3 showed more significant effects.Conclusion:The synergistic hypoglycemic effects of green tea,mulberry leaf and corn silk had the characteristics of multiple-components and multiple-targets with p-PI3K/PI3K,p-Akt/Akt and the translocation of Glut4 signal pathways involved.The three traditional herbs might have the potential to be combined used for the prevention and treatment of diabetes based on the synergistic hypoglycemic effects.