Organic and Elemental Carbon in Atmospheric Fine Particulate Matter in an Animal Agriculture Intensive Area in North Carolina: Estimation of Secondary Organic Carbon Concentrations

Carbonaceous components contribute significant fraction of fine particulate matter (PM2.5). Study of organic carbon (OC) and elemental carbon (EC) in PM2.5 may lead to better understanding of secondary organic carbon (SOC) formation. This year-long (December 2008 to December 2009) field study was conducted in an animal agriculture intensive area in North Carolina of United States. Samples of PM2.5 were collected from five stations located in an egg production facility and its vicinities. Concentrations of OC/EC and thermograms were obtained using a thermal-optical carbon analyzer. Average levels of OC in the egg production house and at ambient stations were 42.7 μg/m3 and 3.26 - 3.47 μg/m3, respectively. Average levels of EC in the house and at ambient stations were 1.14 μg/m3 and 0.36 - 0.42 μg/m3, respectively. The OC to total carbon (TC) ratios at ambient stations exceeded 0.67, indicating a significant fraction of SOC presented in PM2.5. Principal factor analysis results suggested that possible major source of in-house PM2.5 was from poultry feed and possible major sources of ambient PM2.5 was from contributions of secondary inorganic and organic PM. Using the OC/EC primary ratio analysis method, ambient stations SOC fractions ranged from 68% to 87%. These findings suggested that SOC could appreciably contribute to total PM2.5 mass concentrations in this agriculture intensive area.

Alloying elements characterization in a Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-1Nd titanium alloy by carbon addition

The effects of carbon addition (0.01wt%-0.43wt%) on a Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-1Nd (wt%) alloy with a bimodal microstructure were investigated. Electron probe microanalysis was carried out to examine the partitioning behavior of carbon and the relation of carbon content to the distributions of Al and Mo in the primary αp phase (α p) and β transformed structure (β). It was found that interstitial carbon is enriched in the α p phase and its content slightly reduces with the increase of the volume fraction of α p. The measurements of carbon content in the present alloy with an α p of 15vol% showed that the carbon content in the α p phase increases with the increment of carbon addition until a maximum but keeps almost constant in the β phase. The addition of carbon reduces the solubility of Al and Mo in the α p phase and leads to the increment of Mo partitioning to the β phase. When the carbon content is over 0.17wt% (0.67at%), carbide precipitation occurs in the matrix and its volume fraction is related to the volume fraction of α p which can be explained in term of the difference of carbon solubility in the α p and β phases.

Microstructure of Surface Layer Formed at Low Temperature and High Carbon Concentration Carburizing with Rare Earth Element

A suitable carburized microstructure with fine granular dispersed carbides in hypereutectoid zone,ultra fine martensite in matrix and recrystallized austenite to be refined to the grain size of 12～14 has been obtained by a new process,which is a high carbon concentration carburizing with rare earth element at low temperature(860～880℃)in a discontinuous gas carburization furnace.There was not much difference for the microstructure in eutectic zone between this and conventional process.Forming mechanism of granular carbides has been also studied in this paper.

Seasonal variation of atmospheric elemental carbon aerosols at Zhongshan Station,East Antarctica

Elemental carbon(or black carbon)(EC or BC)aerosols emitted by biomass burning and fossil fuel combustion could cause notable climate forcing.Southern Hemisphere biomass burning emissions have contributed substantially to EC deposition in Antarctica.Here,we present the seasonal variation of EC determined from aerosol samples acquired at Zhongshan Station(ZSS),East Antarctica.The concentration of EC in the atmosphere varied between 0.02 and 257.81 ng·m^(-3)with a mean value of 44.87±48.92 ng·m^(-3).The concentration of EC aerosols reached its peak in winter(59.04 ng·m^(-3))and was lowest(27.26 ng·m^(-3))in summer.Back trajectory analysis showed that biomass burning in southern South America was the major source of the EC found at ZSS,although some of it was derived from southern Australia,especially during winter.The 2019–2020 Australian bush fires had some influence on EC deposition at ZSS,especially during 2019,but the contribution diminished in 2020,leaving southern South America as the dominant source of EC.

OXIDES AND TRACE ELEMENTS OF THE CARBONIFEROUS CARBONATE ROCK IN TIANSHAN MT.,CHINA

OXIDES AND TRACE ELEMENTS OFTHE CARBONIFEROUS CARBONATEROCK IN TIANSHAN MT. , CHINAZhang Qinhua, Qin Qingxiang and Wei Zhouling(Changsha Institute of Geotectonics, Academia Sinica, Changsha, 410013, Hunan, China)oxide, trace element, carbonate rock, Carboniferous, Tianshan Mt.The Carboniferous carbonate rock with complicated composition and various rock types and lithofacies develops well in Tianshan Mt. , China, and plays an important role in the study of tectonics and metallogeny in the area. The content and variation characteristics of main pxides and elements are illustrated here based on a great amount of geochemical data.

Analysis on Availability of the Carbon Element in Alcohol Production

According to the concept of circular economy,the mass integration of alcohol production was investigated though the analysis of the carbon element contained in raw material cassava. Through the mass integration,the distillage wastewater turned into carbon resource and produced a great deal of by-product biogas while its chemical oxygen demand (COD) was reduced from 50000 mg/L to not more than 300 mg/L,the local secondary effluent standards,and other by-products such as CO2 (liquidized) and fusel oil were recovered. In the way,the consumption of raw material was only 2.2 tons cassava to produce 1 ton alcohol (96%,-) in the case study,much lower than the average level 2.92 t/t in China. The carbon element balance for production of alcohol was made through testing the concentrations of the carbon element of all mass flows. The results showed that the mass integration helped the availability of the carbon element increased from 44.74% to 64.75%.

EFFECT OF TRACE ELEMENTS WITH ZERO SELF－INTERACTIONCOEFFICIENT ON CRYSTALLIZATION TEMPERATUREOF IRON CARBON ALLOYS

The effect of trace elements with zero self-interaction coefficient on crystallization temperature of iron carbon alloys was studied and the mathematic equation was developed based on thermodynamics in the present researeh. With the equation developed in this paper, the effects of nitrogen on crystallization temperature of Fe-3.45C-2.15Si0. 16Mn and Fe-3.45C-2. 15Si-0. 80Mn alloys were discussed.

Analysis of Single-Walled Carbon Nanotubes Using a Chemical Bond Element Model

三维的 nano 规模有限元素模型(女性) ，打电话给化学契约元素模特儿，为在分子的力学之上基于的围单人赛的碳 nanotubes (SWCNT ) 的机械性质的模拟被建议方法。在碳原子之间的化学契约被化学契约元素建模。一个亚僵硬矩阵的常数被使用在分子的力学和连续统力学之间的一个连接决定。为了评估建议模型，的正确性和表演，模拟被做在有弹性的模量上决定 nanotube 墙厚度，半径和长度的影响(幼仔是模量并且砍模量) SWCNT。模拟结果证明墙厚度的选择显著地影响幼仔的模量并且砍模量。力量地常数也是很重要的，因为有弹性的模量是敏感的强迫，地常数和 SWCNT 的有弹性的性质与试管的半径有关。到有弹性的模量的长度的贡献是不足道的并且能被忽略。与比较幼仔是模量并且砍在文学报导的模量，介绍结果与相应理论结果和许多试验性的大小同意很好。而且，如果力量常数适当地被选择，现在的方法能方便地被用来预言象硼氮化物 nanotubes 那样的另外的围单人赛的 nanotubes 的机械行为。结果在碳 nanotubes 并且在基于 nanotube 的设备的分析的机械行为的学习作为一个珍贵工具表明建议模型的价值。

Trace and Rare Earth Element Geochemistry of Micrite Mound Carbonates and Other Related REE Mineralized Carbonates from Bayan Obo Area in Inner Mongolia

Geochemical study on trace and rare earth element geochemistry was carried out for different carbonates including the very REE-rich ones in the main ore bodies, a carbonatite dyke and two micrite mounds from Heilaobao far away from the Bayan Obo ore deposit, and Xishan in west Beijing. The results show that both carbonatite dyke and REE mineralized carbonates (dolomite and marble) in the main ore bodies and outside ore bodies have similarities to each other, with very extreme positive anomaly of Ba, Th, Nb, La, Ce, Nd, Sm, Pb, medium positive anomaly of Y, Ho, Tb, Er, Yb and negative anomaly of Sc, Ti and Cu. The REE concentration in the mineralized carbonates changes greatly, the total REE content changes from 262×10^(-6) in both east and west ore deposits to 104562 ×10^(-6) (10.46%), which is relatively lower than those samples of carbonatite dyke, whose REE contents vary greatly, from 1% up to 20 % of mass fraction. Light REE in the carbonatites are enriched and highly fractionated relative to heavy REE and there is no Eu anomaly. The REE distribution patterns of both mineralized carbonate and carbonatite dyke are of some similarities. However, the sedimentary carbonate micrite of Salinhudong Group in Heilaobao far outside the ore bodies and the pure carbonates from Xishan in Beijing, central part of North China plate, have the similarities in REE distributions with much lower REE contents, which are significantly different from those of carbonatite dyke and REE mineralized carbonate. In Bayan Obo district, both carbonates in the ore deposit and micrite mound outside the ore deposit underwent widespread metasomatism by fluids that resulted in formation of the superlager Fe-Nb-REE mineralization. It appears that the carbonates represent the evolution products of different geological stages.

Effects of Copper-Zinc Alloy Doped with Rare Earth Elements on Crystal of Calcium Carbonate

A copper-zinc alloy doped with rare earth elements was prepared and the mechanism was demonstrated in a simulating boiler and circulating cooling water with rigidity 1 mmol·L-1. The polar curve and scale inhibiting ability of the alloy was tested by a corrosion measurement system and a scale inhibition evaluation system, respectively. Scale samples were characterized with SEM and XRD. It is found that the transfer of cations could be promoted by doping with proper rare earth elements, and the corrosion potentials descend by 25～126 mV. The results indicated that the copper-zinc alloy doped with rare earth elements has higher scale inhibiting ability of CaCO3. The growth of calcite was affected by zinc ions dissolved because of primary battery reaction, and the transition of calcium carbonate from aragonite to calcite was hampered resulting in the proportion of aragonite to calcite is changed from 1.7∶1 to 2.7∶1.

Finite element and experimental analysis of Vickers indentation testing on Al_2O_3 with diamond-like carbon coating

Numerical simulation and experimental study of the Vickers indentation testing of the Al2O3 ceramic coated by diamond-like carbon(DLC) layer were conducted.The numerical analysis was implemented by a two-dimensional finite element(FE) axis symmetry model.FE analysis results gave insight into the fracture mechanism of DLC films coated on brittle ceramic(Al2O3) substrates.The maximum principal stress field was used to locate the most expected area for crack formation and propagation during the Vickers indentation testing.The results show that the median crack initiates in the interface under indenter,before ring crack occurs as the indenter presses down.Finally,the plastic deformation appears when the indenter penetrates into the substrate.The thicker DLC coating increases the Vickers hardness and fracture toughness.

Investigating Catalase and Carbonic Anhydrase Enzyme Activities and Levels of Certain Trace Elements and Heavy Metals in Patients with Primary and Metastatic Hepatic Carcinoma

Hepatocellular carcinoma (HCC) is among most common terminal cancer types in the world. Primary etiological factors include cirrhosis, hepatitis, aflatoxin and alcohol. The current study was conducted to determine cytosolic erythrocyte carbonic anhydrase and catalase enzyme activities and levels of some trace elements. For this purpose, 40 patients with primary and metastatic hepatic cancer and 29 healthy volunteers enrolled to the study. Catalase and carbonic anhydrase enzyme activities and serum trace element levels were measured in patient and control groups. In the current study, serum copper, magnesium, manganese and zinc levels were lower in the primary and metastatic hepatic cancer group in comparison with the control group (P < 0.05). In contrast, serum iron, cobalt, cadmium and lead levels were higher in the patient relative to the control group (P < 0.05). In comparison with the control group, the catalase level was lower in primary and metastatic cancer group, while the carbonic anhydrase level was higher in the cancer group (P < 0.05). Changes in levels of trace elements and anti-oxidant enzymes may be the factors which influence the development and progression of liver cancer. The carbonic anhydrase enzyme can be a useful indicator in the diagnosis of cancer. However, this issue warrants further investigation.

Carbon,Nitrogen,and Sulfur Contents in Marine Phytoplankton Cells and Biomass Conversion

In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular elements varied widely among different phytoplankton.We found that temperature is one of the important factors affecting the carbon,nitrogen,and sulfur contents in phytoplankton cells;however,the degree of influence of temperature is different for different kinds of phytoplankton.By measuring the nitrogen content in cells,we found that the C:N ratio indirectly measured in the experiment fluctuated in the range of 3.50-8.97,and the average C:N ratio was 5.52.In this experiment,we accurately measured the cell elemental contents at different temperatures and transformed the cell count results into carbon,nitrogen,and sulfur contents to express the biomass.This method ensures that the contribution of species that are small in number but with a large cell volume in biomass is considered.Moreover,this method comprehensively considers the interspecific differences of species and the uneven distribution of elements in phytoplankton cells,which is of significance in the estimation of marine carbon and nitrogen budget.The distribution of nitrogen content in marine phytoplankton can well indicate the marine eutrophication caused by human activities.Climate change can affect the community structure and element composition of marine phytoplankton,meanwhile marine carbon and nitrogen element can regulate the climate to a certain extent.

A Finite Element Study of Crack Behavior for Carbon Na-notube Reinforced Bone Cement

Polymethylmethacrylate (PMMA) bone cement is a polymeric material that is widely used as a structural orthopedic material. However, it is not an ideal material for bone grafting due to its fragility. Carbon nanotubes (CNTs) have been introduced in order to reinforce PMMA resulting in a composite material which exhibits improved tensile properties, increased fatigue resistance and fracture toughness. This improvement is potentially due to bridging and arresting cracks as well as absorption of energy. In this study, a two-dimensional finite element model is presented for the fracture analysis of PMMA-CNT composite material. Instead of the classical single fiber model, the present work considers an ensemble of CNTs interacting with a pre-existing crack. Casca is used to produce a two dimensional mesh and the fracture analysis is performed using Franc 2D. The model is subjected to uni-axial loading in the transverse plane and the interaction between the crack and CNTs is evaluated by determining the stress intensity factor in the vicinity of the crack tips. The effects of geometric parameters of the CNTs and the material structural heterogeneity on crack propagation trajectory are investigated. Furthermore, the effects of CNT diameter, wall thickness and elastic mismatch between the matrix and the nanotubes on crack growth are studied. The results illustrate that the CNTs repel cracks during loading as they act as barriers to crack growth. As a result, the incorporation of CNTs into PMMA reduces crack growth but more importantly increases the fracture resistance of bone cement.

Effect of stabilizing elements Nb and Ti on the microstructure and properties of low carbon ferritic stainless steel

The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown that the interstitial elements, such as C and N, may be completely stabilized by the addition of Nb and Ti. With the increase of Nb and Ti contents ,the α ＋ γ two phases gradually transfer to a single α-phase under a high temperature condition ,and the content of the carbide M23 C6 gradually decreases. The microstructure has indicated that the combined addition of Nb and Ti can promote the recrystallization of the band structure and form more uniform equiaxed grains. Also, with the increase of Nb and Ti contents,the elongation, the r-value and the corrosion resistance of cold-rolled and annealed sheets are improved prominently. In comparison with the effect of Ti ,the addition of Nb is more beneficial to the increase of r-value and the corrosion resistance.

Design and optimization of carbon nanotube/polymer actuator by using finite element analysis

In recent years,actuators based on carbon nanotube（CNT） or graphene demonstrate great potential applications in the fields of artificial muscles,smart switches,robotics,and so on.The electrothermal and photothermal bending actuators based on CNT/graphene and polymer composites show large bending actuations,which are superior to traditional thermaldriven actuators.However,the influence of material parameters（thickness,temperature change,etc.） on the actuation performance needs to be further studied,because it is a critical point to the design and fabrication of high-performance actuators.In this work,finite element analysis（EEA） is employed to simulate the actuation performance of CNT/polymer actuator,which has a bilayer structure.The main focus of this work is to design and to optimize material parameters by using computational method.FEA simulation results show that each layer thickness of actuator has an important influence on the actuation deformation.A maximum curvature of 2.7 cm^（-1） is obtained by simulation,which is much larger than most of the actuator curvature reported in previous experiments.What is more,larger temperature change and larger difference of coefficient of thermal expansion（CTE） between two layers will result in larger bending actuation.This study is expected to provide valuable theoretical reference for the design and realization of CNT-based thermal actuator with ultra-large actuation performance.

Sm-Nd dating and rare earth element geochemistry of the hydrothermal calcites from Guling carbonate-hosted talc mineralization in the central Guangxi province,South China

Many carbonate-hosted talc mineralization,which are widespread in South China,exclusively developed in Carboniferous dolomitic limestone with many siliceous bands and nodules,and cherts.One of those typical deposits is the Guling talc deposit in Mashan County,central Guangxi province,with a talc reserve of1.51 million tons.Mineral associations in the deposit are sample,mainly including talc and calcite.In this paper,Sm-Nd isotopic system and rare earth elements and yttrium(REE + Y) for the hydrothermal calcite intergrown with talc are used to constrain the age and origin of the talc mineralization.The hydrothermal calcite samples from the deposit display Sm and Nd concentrations ranging from 0.18 to 0.85 and 0.85 to 4.56 ppm,respectively,and variable Sm/Nd ratios of 0.21-0.24.These calcites further yield an Sm-Nd isochron age of 232 ±19 Ma(2a)(MSWD = 0.47) with an concordant initial ^(143)Nd-^(144)Nd ratios of 0.511967 ± 0.000017,which should be interpreted as the mineralization age of the Guling talc deposit.In addition,the calcite samples are enriched in REE with the variable SREE contents ranging from 4.82 to21.50 ppm and display relatively consistent chondritenormalized REE + Y patterns with the LREE enrichment(LREE/HREE=2.00-3.60)and the obvious negative Eu(δEu=0.52-0.68)and Ce(δCe=0.16-0.33)anomalies.The Y/Ho ratios of seven calcites varies from 43.30 to59.34,with a mean value of 49.73.The available mineral associations and REE parameters(i.e.,REE patterns and Y/Ho ratios) of those calcites indicate that the ore-forming fluids of the talc mineralization be probably derived from the meteoric waters,in particular evolved ones in the Karst areas and the ore-forming materials(e.g.,Si and Mg) are likely to be originated from the ore-bearing dolostone in the Yanguan Formation(C_1y) and underlying siliceous rocks in the Liujiang Formation(D_3l).Furthermore,the talc mineralization could take place within a hydrothermal system with relative oxidizing environment and middle temperature,due to the obvious negative Eu and Ce anomalies in the calcites in the Guling deposit.

Geochemical Characteristics of the Trace and Rare Earth Elements in Reef Carbonates from the Xisha Islands(South China Sea): Implications for Sediment Provenance and Paleoenvironment

Based on the concentrations of the trace elements,rare earth elements(REE),and Sr isotopic compositions in reef carbonates from the well‘Xike-1’reef core of the Xisha Islands,the constraints on sediment provenance and paleoenvironment were defined.Variations of the terrigenous input into the paleoseawater were traced in detail and the paleoenvironment and sediment provenance were further investigated.The results show that the HREE/LREE values in the reef carbonates are negatively associated with their Th and Al concentrations;however,their Al and Th concentrations show positive correlation.The lowest 87 Sr/86 Sr values in the reef carbonates generally coincide with the lowest values of Al,Th concentrations and the highest values of HREE/LREE.These data indicate that the HREE/LREE,Al concentrations,and Th concentrations of the reef carbonates are useful indexes for evaluating the influence of the terrigenous inputs on the seawater composition in the study area.From top to bottom,the changing process of the HREE/LREE values and Al,Th concentrations can be divided into 6 intervals;they are H1(0–89.30 m,about 0–0.11 Myr),L1(89.30–198.30 m,about 0.11–2.2 Myr),H2(198.30–374.95 m,about 2.2–5.3 Myr),D(374.95–758.40 m,about 5.3–13.6 Myr),L2(758.40–976.86 m,about 13.6–15.5 Myr),and H3(976.86–1200.00 m,about 15.5–21.5 Myr).Moreover,the changing trend of the HREE/LREE values coincides with that of the seawater δ^13C values recorded by benthonic foraminiferal skeletons from the drill core of ODP site 1148 in the South China Sea(SCS),but not with that of the seawaterδ18O values.The high uplifting rates of the Qinghai-Tibet Plateau coincide with the high Th and Al concentrations and the low HREE/LREE values in the reef carbonates.These data indicate that the main factors controlling the changes of terrigenous flux in the SCS are the tectonic activities associated with Qinghai-Tibet Plateau uplifting and the variations of uplifting rates rather than paleoclimatic changes.

High Moisture Sensitivity of the Elements Based on Carbon Nanotubes Array

The results of the research and development of the moisture-sensitive elements based on the carbon nanotubes (CNT) array are presented. It was shown that CNT arrays that were grown by low-temperature plasma enhanced chemical vapor deposition (PECVD) method on the planar Si structures exhibit extremely high moisture sensitivity. The structure resistance ratio in dry and moisture conditions exceed 400. Such relatively high change in resistances is conditioned by the pattern of change of the charge carrier’s conductivity between certain nanotubes in the bundle when water molecules adsorption occurs.

多维视角下乡村社区空间减碳策略综述

乡村是我国实现双碳目标的重要场域,但其社区层面的空间低碳策略在理论探索与实践验证方面尚存在诸多不足。为进一步明确乡村社区空间减碳路径,有必要厘清相关领域研究现状进展,识别未来研究方向。本文针对乡村社区空间减碳领域进行政策梳理和文献综述,从规划、景观、建筑的多维视角梳理了研究进展并识别当前研究不足。研究综述的结果突出了强化多维视角、完善数据框架、量化生态价值、深化数字赋能及注重文脉保护等未来极具潜力的研究方向。研究成果有助于在双碳目标的扎实推进中挖掘更多的乡村力量,为乡村社区低碳转型提供参考。