Message Verification Protocol Based on Bilinear Pairings and Elliptic Curves for Enhanced Security in Vehicular Ad Hoc Networks

Vehicular ad hoc networks(VANETs)provide intelligent navigation and efficient route management,resulting in time savings and cost reductions in the transportation sector.However,the exchange of beacons and messages over public channels among vehicles and roadside units renders these networks vulnerable to numerous attacks and privacy violations.To address these challenges,several privacy and security preservation protocols based on blockchain and public key cryptography have been proposed recently.However,most of these schemes are limited by a long execution time and massive communication costs,which make them inefficient for on-board units(OBUs).Additionally,some of them are still susceptible to many attacks.As such,this study presents a novel protocol based on the fusion of elliptic curve cryptography(ECC)and bilinear pairing(BP)operations.The formal security analysis is accomplished using the Burrows–Abadi–Needham(BAN)logic,demonstrating that our scheme is verifiably secure.The proposed scheme’s informal security assessment also shows that it provides salient security features,such as non-repudiation,anonymity,and unlinkability.Moreover,the scheme is shown to be resilient against attacks,such as packet replays,forgeries,message falsifications,and impersonations.From the performance perspective,this protocol yields a 37.88%reduction in communication overheads and a 44.44%improvement in the supported security features.Therefore,the proposed scheme can be deployed in VANETs to provide robust security at low overheads.

Logistic Regression with Elliptical Curve Cryptography to Establish Secure IoT

Nowadays,Wireless Sensor Network(WSN)is a modern technology with a wide range of applications and greatly attractive benefits,for example,self-governing,low expenditure on execution and data communication,long-term function,and unsupervised access to the network.The Internet of Things(IoT)is an attractive,exciting paradigm.By applying communication technologies in sensors and supervising features,WSNs have initiated communication between the IoT devices.Though IoT offers access to the highest amount of information collected through WSNs,it leads to privacy management problems.Hence,this paper provides a Logistic Regression machine learning with the Elliptical Curve Cryptography technique(LRECC)to establish a secure IoT structure for preventing,detecting,and mitigating threats.This approach uses the Elliptical Curve Cryptography(ECC)algorithm to generate and distribute security keys.ECC algorithm is a light weight key;thus,it minimizes the routing overhead.Furthermore,the Logistic Regression machine learning technique selects the transmitter based on intelligent results.The main application of this approach is smart cities.This approach provides continuing reliable routing paths with small overheads.In addition,route nodes cooperate with IoT,and it handles the resources proficiently and minimizes the 29.95%delay.

Smart Grid Communication Under Elliptic Curve Cryptography

Smart Grids(SGs)are introduced as a solution for standard power dis-tribution.The significant capabilities of smart grids help to monitor consumer behaviors and power systems.However,the delay-sensitive network faces numer-ous challenges in which security and privacy gain more attention.Threats to trans-mitted messages,control over smart grid information and user privacy are the major concerns in smart grid security.Providing secure communication between the service provider and the user is the only possible solution for these security issues.So,this research work presents an efficient mutual authentication and key agreement protocol for smart grid communication using elliptic curve crypto-graphy which is robust against security threats.A trust authority module is intro-duced in the security model apart from the user and service provider for authentication.The proposed approach performance is verified based on different security features,communication costs,and computation costs.The comparative analysis of experimental results demonstrates that the proposed authentication model attains better performance than existing state of art of techniques.

Secure and efficient elliptic curve cryptography resists side-channel attacks

An embedded cryptosystem needs higher reconfiguration capability and security. After analyzing the newly emerging side-channel attacks on elliptic curve cryptosystem （ECC）, an efficient fractional width-w NAF （FWNAF） algorithm is proposed to secure ECC scalar multiplication from these attacks. This algorithm adopts the fractional window method and probabilistic SPA scheme to reconfigure the pre-computed table, and it allows designers to make a dynamic configuration on pre-computed table. And then, it is enhanced to resist SPA, DPA, RPA and ZPA attacks by using the random masking method. Compared with the WBRIP and EBRIP methods, our proposals has the lowest total computation cost and reduce the shake phenomenon due to sharp fluctuation on computation performance.

RGB Based Multiple Share Creation in Visual Cryptography with Aid of Elliptic Curve Cryptography

In visual cryptography, many shares are generated which are illogical containing certain message within themselves. When all shares are piled jointly, they tend to expose the secret of the image. The notion of visual secret sharing scheme is to encrypt a secret image into n illogical share images. It is unable to reveal any data on the original image if at least one of the shares is not achieved. The original image, in fact, is realized by overlapping the entire shares directly, in order that the human visual system is competent to identify the collective secret image without employing any complicated computational tools. Therefore, they are communicated steadily as number of shares. The elliptic curve cryptography approach, in turn, is employed to augment the privacy and safety of the image. The new.fangled technique is utilized to generate the multiple shares which are subjected to encryption and decryption by means of the elliptic curve cryptography technique. The test outcomes have revealed the fact that the peak signal to noise ratio is 58.0025, Mean square error value is 0.1164 and the correlation coefficient is 1 for the decrypted image without any sort of distortion of the original image.

ASIP for Elliptic Curve Cryptography Based on VLIW Architecture

The requirement of the flexible and effective implementation of the Elliptic Curve Cryptography (ECC) has become more and more exigent since its dominant position in the public-key cryptography application.Based on analyzing the basic structure features of Elliptic Curve Cryptography (ECC) algorithms,the parallel schedule algorithm of point addition and doubling is presented.And based on parallel schedule algorithm,the Application Specific Instruction-Set Co-Processor of ECC that adopting VLIW architecture is also proposed in this paper.The coprocessor for ECC is implemented and validated using Altera’s FPGA.The experimental result shows that our proposed coprocessor has advantage in high performance and flexibility.

Secured Data Storage Using Deduplication in Cloud Computing Based on Elliptic Curve Cryptography

The tremendous development of cloud computing with related technol-ogies is an unexpected one.However,centralized cloud storage faces few chal-lenges such as latency,storage,and packet drop in the network.Cloud storage gets more attention due to its huge data storage and ensures the security of secret information.Most of the developments in cloud storage have been positive except better cost model and effectiveness,but still data leakage in security are billion-dollar questions to consumers.Traditional data security techniques are usually based on cryptographic methods,but these approaches may not be able to with-stand an attack from the cloud server's interior.So,we suggest a model called multi-layer storage(MLS)based on security using elliptical curve cryptography(ECC).The suggested model focuses on the significance of cloud storage along with data protection and removing duplicates at the initial level.Based on divide and combine methodologies,the data are divided into three parts.Here,thefirst two portions of data are stored in the local system and fog nodes to secure the data using the encoding and decoding technique.The other part of the encrypted data is saved in the cloud.The viability of our model has been tested by research in terms of safety measures and test evaluation,and it is truly a powerful comple-ment to existing methods in cloud storage.

ELLIPTIC CURVE CRYPTOGRAPHY BASED AUTHENTICATED KEY AGREEMENT WITH PRE-SHARED PASSWORD

Based on elliptic curve Diffie-Hellman algorithm, an Elliptic Curve Authenticated Key Agreement (ECAKA) protocol with pre-shared password is proposed. Its security relies on the Elliptic Curve Discrete Logarithm Problem (ECDLP). It provides identity authentication, key validation and perfect forward secrecy, and it can foil man-in-the-middle attacks.

Binary Sequences from a Pair of Elliptic Curves

A family of binary sequences were constructed by using an elliptic curve and its twisted curves over finite fields. It was shown that these sequences possess ＂good＂ cryptographie properties of 0-1 distribution, long period and large linear complexity. The results indicate that such se quences provide strong potential applications in cryptography.

DYNAMIC ID-BASED REMOTE USER MUTUAL AUTHENTICATION SCHEME WITH SMARTCARD USING ELLIPTIC CURVE CRYPTOGRAPHY

In the literature, several dynamic ID-based remote user mutual authentication schemes are implemented using password, smartcard and Elliptic Curve Cryptography(ECC), however, none of them provides resilience against different attacks. Therefore, there is a great need to design an efficient scheme for practical applications. In this paper, we proposed such a scheme in order to provide desired security attributes and computation efficiencies. Compared with other existing techniques, our scheme is more efficient and secured. In addition, our scheme is provably secure in the random oracle model under the hardness assumption of computational Diffie-Hellman problem.

DEFENSE AGAINST COLLUSION SCHEME BASED ON ELLIPTIC CURVE CRYPTOGRAPHY FOR WIRELESS SENSOR NETWORKS

Wireless Sensor Networks (WSNs) are being deployed for a wide variety of applications and the security problems of them have received considerable attention. Considering the limitations of power, computation capability and storage resources, this paper proposed an efficient defense against collusion scheme based on elliptic curve cryptography for wireless sensor networks in order to solve the problems that sensor node-key leaking and adversaries make compromised nodes as their collusions to launch new attack. In the proposed scheme, the group-key distribution strategy is employed to compute the private key of each sensor node, and the encryption and decryption algorithms are constructed based on Elliptic Curve Cryptography (ECC). The command center (node) only needs to broadcast a controlling header with three group elements, and the authorized sensor node can correctly recover the session key and use it to decrypt the broadcasting message. Analysis and proof of the proposed scheme's efficiency and security show that the proposed scheme can resist the k-collusion attack efficiently.

Cryptography with Elliptic Curve Using Tifinagh Characters

The paper describes the concept of plaintext encryption by using the Unicode characters. In the case of elliptic curve cryptography, there is not specified rule or algorithm to specify the letters of Tifinagh as well as special characters. So, the paper gives the transformation of characters Tifinagh into points on elliptic curve by using the corresponding characters Latin. The obtained correspondence has been applied in Menezes-Vanstone cryptosystem based on elliptic curve. Therefore, the paper explains in detail its implementation in Maple 12.

A Secure Hardware Implementation for Elliptic Curve Digital Signature Algorithm

Since the end of the 1990s,cryptosystems implemented on smart cards have had to deal with two main categories of attacks:side-channel attacks and fault injection attacks.Countermeasures have been developed and validated against these two types of attacks,taking into account a well-defined attacker model.This work focuses on small vulnerabilities and countermeasures related to the Elliptic Curve Digital Signature Algorithm(ECDSA)algorithm.The work done in this paper focuses on protecting the ECDSA algorithm against fault-injection attacks.More precisely,we are interested in the countermeasures of scalar multiplication in the body of the elliptic curves to protect against attacks concerning only a few bits of secret may be sufficient to recover the private key.ECDSA can be implemented in different ways,in software or via dedicated hardware or a mix of both.Many different architectures are therefore possible to implement an ECDSA-based system.For this reason,this work focuses mainly on the hardware implementation of the digital signature ECDSA.In addition,the proposed ECDSA architecture with and without fault detection for the scalar multiplication have been implemented on Xilinxfield programmable gate arrays(FPGA)platform(Virtex-5).Our implementation results have been compared and discussed.Our area,frequency,area overhead and frequency degradation have been compared and it is shown that the proposed architecture of ECDSA with fault detection for the scalar multiplication allows a trade-off between the hardware overhead and the security of the ECDSA.

Enabling Efficient Data Transmission in Wireless Sensor Networks-Based IoT Application

The use of the Internet of Things(IoT)is expanding at an unprecedented scale in many critical applications due to the ability to interconnect and utilize a plethora of wide range of devices.In critical infrastructure domains like oil and gas supply,intelligent transportation,power grids,and autonomous agriculture,it is essential to guarantee the confidentiality,integrity,and authenticity of data collected and exchanged.However,the limited resources coupled with the heterogeneity of IoT devices make it inefficient or sometimes infeasible to achieve secure data transmission using traditional cryptographic techniques.Consequently,designing a lightweight secure data transmission scheme is becoming essential.In this article,we propose lightweight secure data transmission(LSDT)scheme for IoT environments.LSDT consists of three phases and utilizes an effective combination of symmetric keys and the Elliptic Curve Menezes-Qu-Vanstone asymmetric key agreement protocol.We design the simulation environment and experiments to evaluate the performance of the LSDT scheme in terms of communication and computation costs.Security and performance analysis indicates that the LSDT scheme is secure,suitable for IoT applications,and performs better in comparison to other related security schemes.

Blockchain-Based Message Authentication Scheme for Internet of Vehicles in an Edge Computing Environment

As an important application of intelligent transportation system,Internet of Vehicles(IoV)provides great convenience for users.Users can obtain real-time traffic conditions through the IoV’s services,plan users’travel routes,and improve travel efficiency.However,in the IoV system,there are always malicious vehicle nodes publishing false information.Therefore,it is essential to ensure the legitimacy of the source.In addition,during the peak period of vehicle travel,the vehicle releases a large number of messages,and IoV authentication efficiency is prone to performance bottlenecks.Most existing authentication schemes have the problem of low authentication efficiency in the scenario.To address the above problems,this paper designs a novel reliable anonymous authentication scheme in IoV for Rush-hour Traffic.Here,our scheme uses blockchain and elliptic curve cryptography(ECC)to design authentication algorithms for message authentication between vehicles and roadside units(RSU).Additionally,we introduce the idea of edge computing into the scheme,RSU will select themost suitable vehicle as the edge computing node for message authentication.In addition,we used the ProVerif tool for Internet security protocols and applications to test its security,ensuring that it is secure under different network attacks.In the simulation experiment,we compare our scheme with other existing works.Our scheme has a significant improvement in computational overhead,authentication efficiency and packet loss rate,and is suitable for traffic scenarios with large message volume.

Elliptic Curve Point Multiplication by Generalized Mersenne Numbers

Montgomery modular multiplication in the residue number system （RNS） can be applied for elliptic curve cryptography. In this work, unified modular multipliers over generalized Mersenne numbers are proposed for RNS Montgomery modular multiplication, which enables efficient elliptic curve point multiplication （ECPM）. Meanwhile, the elliptic curve arithmetic with ECPM is performed by mixed coordinates and adjusted for hardware implementation. In addition, the conversion between RNS and the binary number system is also discussed. Compared with the results in the literature, our hardware architecture for ECPM demonstrates high performance. A 256-bit ECPM in Xilinx XC2VP100 field programmable gate array device （FPGA） can be performed in 1.44 ms, costing 22147 slices, 45 dedicated multipliers, and 8.25K bits of random access memories （RAMs）.

FPGA Implementation of Elliptic-Curve Diffie Hellman Protocol

This paper presents an efficient crypto processor architecture for key agreement using ECDH(Elliptic-curve Diffie Hellman)protocol over GF2163.The composition of our key-agreement architecture is expressed in consisting of the following:(i)Elliptic-curve Point Multiplication architecture for public key generation(DESIGN-I)and(ii)integration of DESIGN-I with two additional routing multiplexers and a controller for shared key generation(DESIGN-II).The arithmetic operators used in DESIGN-I and DESIGNII contain an adder,squarer,a multiplier and inversion.A simple shift and add multiplication method is employed to retain lower hardware resources.Moreover,an essential inversion operation is operated using the Itoh-Tsujii algorithm with similar hardware resources of used squarer and multiplier units.The proposed architecture is implemented in a Verilog HDL.The implementation results are given on a Xilinx Virtex-7 FPGA(field-programmable gate array)device.For DESIGN-I and DESIGN-II over GF2163,(i)the utilized Slices are 3983 and 4037,(ii)the time to compute one public key and a shared secret is 553.7μs and 1170.7μs and(iii)the consumed power is 29μW and 57μW.Consequently,the achieved area optimized and power reduced results show that the proposed ECDH architecture is a suitable alternative(to generate a shared secret)for the applications that require low hardware resources and power consumption.

Software Implementation of Elliptic Curve Encryption over Binary Field

The mathematical theory for elliptic curve encryption based on optimal normal basis(ONB) over F_2~m is introduced.Then an elliptic curve cryptography(ECC) based encryption scheme isanalyzed and designed.The mechanism for key exchange based on Diffie-Hellman is described in detailsfor further applications.Based on these theoretic foundations,the software based on ECC is developedand an application is provided.The software is characterized by excellent security as well as highefficiency.

EBAKE-SE: A novel ECC-based authenticated key exchange between industrial IoT devices using secure element

Industrial IoT(IIoT)aims to enhance services provided by various industries,such as manufacturing and product processing.IIoT suffers from various challenges,and security is one of the key challenge among those challenges.Authentication and access control are two notable challenges for any IIoT based industrial deployment.Any IoT based Industry 4.0 enterprise designs networks between hundreds of tiny devices such as sensors,actuators,fog devices and gateways.Thus,articulating a secure authentication protocol between sensing devices or a sensing device and user devices is an essential step in IoT security.In this paper,first,we present cryptanalysis for the certificate-based scheme proposed for a similar environment by Das et al.and prove that their scheme is vulnerable to various traditional attacks such as device anonymity,MITM,and DoS.We then put forward an interdevice authentication scheme using an ECC(Elliptic Curve Cryptography)that is highly secure and lightweight compared to other existing schemes for a similar environment.Furthermore,we set forth a formal security analysis using the random oracle-based ROR model and informal security analysis over the Doleve-Yao channel.In this paper,we present comparison of the proposed scheme with existing schemes based on communication cost,computation cost and security index to prove that the proposed EBAKE-SE is highly efficient,reliable,and trustworthy compared to other existing schemes for an inter-device authentication.At long last,we present an implementation for the proposed EBAKE-SE using MQTT protocol.

Automated Irrigation System Using Improved Fuzzy Neural Network in Wireless Sensor Networks

Irrigation plays a significant role in various agricultural cropping methods deployed in semiarid and arid regions where valuable water applications and managing are considered crucial concerns.Multiple factors such as weather,soil,water,and crop data need to be considered for irrigation maintenance in an efficient besides uniform manner from multifaceted and different information-based systems.A Multi-Agent System(MAS)has been proposed recently based on diverse agent subsystems with definite objectives for attaining global MAS objective and is deployed on Cloud Computing paradigm capable of gathering information from Wireless Sensor Networks(WSNs)positioned in rice,cotton,cassava crops for knowledge discovery and decision making.The radial basis function network has been used for irrigation prediction.However,in recent work,the security of data has not focused on where intruder involvement might corrupt the data at the time of data transferring to the cloud,which would affect the accuracy of decision making.To handle the above mentioned issues,an efficient method for irrigation prediction is used in this work.The factors considered for decision making are soil moisture,temperature,plant height,root depth.The above-mentioned data will be gathered from the sensors that are attached to the cropfield.Sensed data will be forwarded to the local server,where data encryption will be performed using Adaptive Elliptic Curve Cryptography(AECC).After the encryption process,the data will be forwarded to the cloud.Then the data stored in the cloud will be decrypted key before being given to the deci-sion-making module.Finally,the uniform distribution-based fuzzy neural network is formulated based on the received data information in the decisionmaking module.Thefinal decision regarding the level of water required for cropfields would be taken.Based on this outcome,the water volve opening duration and the level of fertilizers required will be considered.Experimental results demonstrate the effectiveness of the proposed model for the United States Geological Survey(USGS)database in terms of precision,accuracy,recall,and packet delivery ratio.