The elliptical cross-section ogive-nose projectile(ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs ha...The elliptical cross-section ogive-nose projectile(ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the penetration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8%. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the majoreminor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was investigated with respect to the caliber radius head, axial stress, and resistance.展开更多
In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular m...In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.展开更多
Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. S...Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered;2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45- and the axial length of mushroom is considered.展开更多
Configurational information entropy(CIE)analysis has been shown to be applicable for determining the neutron skin thickness(δnp)of neutron-rich nuclei from fragment production in projectile fragmentation reactions.Th...Configurational information entropy(CIE)analysis has been shown to be applicable for determining the neutron skin thickness(δnp)of neutron-rich nuclei from fragment production in projectile fragmentation reactions.The BNN+FRACS machine learning model was adopted to predict the fragment mass cross-sections(σ_(A))of the projectile fragmentation reactions induced by calcium isotopes from ^(36)Ca to ^(56)Ca on a ^(9)Be target at 140MeV/u.The fast Fourier transform was adopted to decompose the possible information compositions inσA distributions and determine the quantity of CIE(S_(A)[f]).It was found that the range of fragments significantly influences the quantity of S_(A)[f],which results in different trends of S_(A)[f]~δnp correlation.The linear S_(A)[f]~δnp correlation in a previous study[Nucl.Sci.Tech.33,6(2022)]could be reproduced using fragments with relatively large mass fragments,which verifies that S_(A)[f]determined from fragmentσAis sensitive to the neutron skin thickness of neutron-rich isotopes.展开更多
The elliptical cross-section spiral equal-channel extrusion （ECSEE） process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the tors...The elliptical cross-section spiral equal-channel extrusion （ECSEE） process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 （45） is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained： u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 11772269, 11802248, and 11872318)。
文摘The elliptical cross-section ogive-nose projectile(ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the penetration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8%. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the majoreminor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was investigated with respect to the caliber radius head, axial stress, and resistance.
文摘In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.
基金financially supported by the National Natural Science Foundation of China(Grant No.11372136)
文摘Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered;2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45- and the axial length of mushroom is considered.
基金the National Natural Science Foundation of China(No.11975091)the Program for Innovative Research Team(in Science and Technology)in the University of Henan Province,China(No.21IRTSTHN011).
文摘Configurational information entropy(CIE)analysis has been shown to be applicable for determining the neutron skin thickness(δnp)of neutron-rich nuclei from fragment production in projectile fragmentation reactions.The BNN+FRACS machine learning model was adopted to predict the fragment mass cross-sections(σ_(A))of the projectile fragmentation reactions induced by calcium isotopes from ^(36)Ca to ^(56)Ca on a ^(9)Be target at 140MeV/u.The fast Fourier transform was adopted to decompose the possible information compositions inσA distributions and determine the quantity of CIE(S_(A)[f]).It was found that the range of fragments significantly influences the quantity of S_(A)[f],which results in different trends of S_(A)[f]~δnp correlation.The linear S_(A)[f]~δnp correlation in a previous study[Nucl.Sci.Tech.33,6(2022)]could be reproduced using fragments with relatively large mass fragments,which verifies that S_(A)[f]determined from fragmentσAis sensitive to the neutron skin thickness of neutron-rich isotopes.
基金co-supported by National Natural Science Foundation of China (No. 51275414)Aeronautical Science Foundation of China (No. 2011ZE53059)+1 种基金National Defense Basic Research Program (No. 51318040105)Graduate Starting Seed Fund of Northwestern Polytechnical University(No. Z2011006)
文摘The elliptical cross-section spiral equal-channel extrusion （ECSEE） process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 （45） is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained： u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.
基金supported by the National Natural Science Foundation of China(Grant Nos.12141202 and 12202205)Fundamental Research Funds for the Central Universities(Grant No.30919011401).
