CO2 and SO2 emission characteristics of the whole process industry chain of coal processing and utilization in China

The total coal consumption in China is on the rise.The characteristics of CO2 and SO2 emissions in the whole process of coal processing and utilization in China are worthy of study.Based on the five links of the whole process of coal production and utilization,including coal production,raw coal processing,logistics and transportation,conversion and utilization and resource utilization,this paper summarized and analyzed the energy consumption and pollutant emission sources of these five links,combined with the US Environmental Protection Agency’s AP-42 method and IPCC method,to calculate total pollutant discharge and emission factors,where the emission factors were corrected by conversion efficiency.At the same time,uncertainty analysis is performed about CO2 and SO2 emissions.The results showed that CO2 emissions were 3.657 billion tons,and emission reductions were 61 million tons,and SO2 emissions were 4,844,500 tons,and emission reductions were 10.3595 million tons in 2015.

Effects of Sampling Conditions on Composition and Emission Characteristics of Volatile Organic Compounds in Process Units from Different Refineries

This study investigates the effects of sampling conditions on volatile organic compound(VOC)compositions including different flow restrictors,SUMMA volumes,sampling heights,and wind speeds.Results show that at the six sampling heights the concentrations of main VOC species were slightly different,while the wind speed had a greater impact on the VOC composition of source profiles.With the increase of wind speed,the weighted percentage of high-carbon aromatic hydrocarbons was higher.Besides,there was an extremely different profile between the normal production and shutdown conditions of the delayed coking unit.To compare the emission characteristics of VOCs in various process units of the S and the C refineries,the samples were collected from the catalytic cracking unit,the continuous catalytic reforming unit,and the delayed coking unit.In the continuous catalytic reforming unit,C3-C5 alkanes and low-carbon aromatic hydrocarbons were the main components collected from the S and the C refineries,accounting for 67.1%and 34.9%,respectively.For the delayed coking unit,the total weighted percentage of high carbon C6-C12 alkanes was significantly higher than other units in the S and the C refineries,accounting for 30.5%and 24.4%,respectively.In the catalytic cracking unit,the low-carbon C2-C5 alkanes were abundant,and the weighted percentage of propylene was higher.The emission characteristics obtained were consistent with the processing technology of production units.The results indicate that the VOC emission characteristics from the same production unit in different refineries have similarities and significant differences which are related to the technological process.The emission characteristics of VOCs could provide the data support for source apportionment work in the production units.

Emission Characteristics of Soil Nitrous Oxide from Typical Greenhouse Vegetable Fields in North China

To make clear the emission characteristics of soil N20 from typical green- house vegetable fields in North China, an experiment was conducted in greenhouse tomato field in Shouguang city, Shandong province, China＇s ＂Home of Vegetables＂. The N2O fluxes were observed in four experimental treatments, as follows： none N fertilizer （CK）, single organic fertilizer （OM）, conventional fertilization （FP） and opti- mized and reduced nitrogen fertilization （OPT）, by a close chamber-gas chromato- graph method. The effects of different fertilization treatments on N2O emission and tomato yield were analyzed. The results showed that following the fertilization and ir- rigation, the pulsed emissions of N2O were measured. The N2O emission peak ap- peared after basal fertilizer application and irrigation and could be maintained for about 20 days. While the N2O emission peak caused by topdressing was smaller and last only 3-5 days. The statistical analysis showed that the N2O fluxes were affected by air temperature, soil temperature and WFPS at soil depth of 3 cm. The total contents of soil N2O fluxes had significant differences among experimental groups. The total content orderly was FP of 14. 77 kg/hm^2, OPT of 9. 73 kg/hm^2, OM of 6.84 kg/hm^2 and CK of 2.37 kg/hm^2. The N~：~ emission coefficient ranged from 0.83%-1.10%,which was close to or more than the recommended value （1.0%） by IPCC. Compared with the FP treatment, the tomato yield in OPT treatment, whose application rate of chemical N fertilizer decreased by about 60%, increased by 2.2%. Under the current management measures, the reasonable reduction on ap- plicaUon rate of organic manure and chemical nitrogen fertilizer could effectively re- duce the N=O emissions in greenhouse vegetable fields.

Light Emission Characteristics of Metal/Insulator/Metal and Metal/Insulator/Si Tunnel Junctions Mediated by Surface Plasmon-polaritons

The Au/Al2O3/Al metal/insulator/metal junction(MIMJ) and Au/SiO2/Si metal/insulator/Si junction(MISJ) have been constructed successfully. The light emission of these junctions was mediated by surface plasmon-polaritons(SPPs) under surface roughness. The light emission from MISJ was more uniform and stable than that from MIMJ. The light power of MISJ was about 2~3 orders higher than that of MIMJ. The light emission spectrum of MISJ was analyzed especially. In the spectrum, there was one main peak located at the wavelength of 610 nm^640 nm, which was mainly due to the couple of SPP with the surface roughness at the Au/air and Au/SiO2 interfaces. A weak peak located at the shorter wavelength region in the spectrum was also found, which was caused by the direct radiation of doped-Si plasma oscillation.

Evaluation of Performance and Emission Characteristics of Biodiesel Fuel Produced from Rapeseed Oil

The objective of the present study is to examine and compare the performance and emission characteristic of two biodiesel fuels produced from rapeseed oil via transesterification method.Tested biodiesel fuels(ROME(Rapeseed Oil Methyl Ester)and ROEE(Rapeseed Oil Ethyl Ester))were selected based on their properties obtained from an optimization of transesterification conditions.A Yanmar diesel engine has led to evaluating their performance parameters such as fuel consumption rate,exhaust gas temperature and emission characteristic corresponding to nitrogen oxides(NOx),carbone monoxide(CO)and carbon dioxide(CO2).A comparative analysis was carried out using normal diesel fuel tested in same experimental conditions.Fuel consumption rate was measured by observing the volumetric rate from the fuel tank of the engine supported by stopwatch.The exhaust gas temperature and emission characteristic were measured simultaneously by using a testo 350 flue gas analyzer.According to the results,biodiesel fuels showed a higher fuel consumption rate and exhaust gas temperature under an increase of engine speed.They also exhibited lower NOx emission with a slight rise in CO and CO2 emission compared to mineral diesel fuel.ROME exhibited low emission gas compared to ROEE and mineral diesel.It can be evaluated as a promising alternative fuel for diesel engine.

Heavy Metal Emission Characteristics of Urban Road Runoff

Pavement runoff sampling points were set up on the main roads of Chengdu city.Six rainfall-runoff events from July to September in 2017 were sampled by synchronous observation of rainfall,runoff and pollution.The concentration changes of copper,lead,zinc,chromium and cadmium in the runoff process were monitored,and the pollution emission regularity and initial scouring effect were studied.The results show that the emission regularity of pavement runoff pollution is closely related to rainfall characteristics and pollutant occurrence,and the concentration of dissolved heavy metals reaches its peak at the initial stage of runoff.The peak time of particulate heavy metal concentration lagged slightly behind that of rainfall intensity.There is a big difference between the strength of initial scouring degree and dissolved heavy metals the stronger the initial scouring degree of total heavy metals,the weaker the dissolved heavy metals.Reducing pavement runoff in the early stage of rainfall is an effective means to control heavy metal pollution.

Dynamic emission characteristics and control strategies of air pollutants from motor vehicles in downtown Beijing,China

This study combined the real-time monitoring and investigation of traffic flows to comprehensively analyze the road traffic flow and vehicle structure in downtown Beijing.A dynamic emission inventory of motor vehicle air pollutants in downtown Beijing in 2021 was established,and the impact of these emissions on air quality was simulated and quantified,and different emission reduction control scenarios were proposed to evaluate their environmental improvement effects and explore measures to mitigate the impact of pollution emissions.The results show that the high traffic flow and the structure of the motor vehicle emissions in downtown Beijing are the main causes of severe motor vehicle pollution.Monitoring data shows that traffic flow in central Beijing is dominated by small passenger vehicles,while the vehicle mix is better than in other regions,with 72.0%of vehicles meeting"National V"or higher emission standards.However,to achieve higher air quality goals,further reducing vehicle emissions is necessary.Based on dynamic traffic flow,the average daily emissions of nitrogen oxides(NOX),particulate matters(PM_(2.5))and volatile organic compounds(VOC)from motor vehicles in central Beijing are 17.7 tons,0.6 tons and 14.0 tons,respectively,accounting for 23.0%of the city’s average daily motor vehicle emissions.If a zero-emission zone for motor vehicles were implemented in central Beijing,the annual average emission level of pollutants will be reduced by 10.4%to 21.0%.The designation of ultra-low emission zones for motor vehicles could be effective in improving the air quality in the center of Beijing.

Real-world emission characteristics of carbonyl compounds from agricultural machines based on a portable emission measurement system

Emissions of carbonyl compounds from agricultural machines cannot be ignored.Carbonyl compounds can cause the formation of ozone(O3)and secondary organic aerosols,which can cause photochemical smog to form.In this study,20 agricultural machines were tested using portable emission measurement system(PEMS)under real-world tillage processes.The exhaust gases were sampled using 2,4-dinitrophenylhydrazine cartridges,and 15 carbonyl compounds were analyzed by high-performance liquid chromatography.Carbonyl compound emission factors for agricultural machines were 51.14–3315.62 mg/(kg-fuel),and were 2.58±2.05,0.86±1.07 and 0.29±0.20 g/(kg-fuel)for China 0,China II and China III emission standards,respectively.Carbonyl compound emission factor for sowing seeds of China 0 agricultural machines was 3.32±1.73 g/(kg-fuel).Formaldehyde,acetaldehyde and acrolein were the dominant carbonyl compounds emitted.Differences in emission standards and tillage processes impact ozone formation potential(OFP).The mean OFP was 20.15±16.15 g O3/(kg-fuel)for the China 0 emission standard.The OFP values decreased by 66.9% from China 0 to China II,and 67.4%from China II to China III.The mean OFP for sowing seeds of China 0 agricultural machines was 25.92±13.84 g O3/(kg-fuel).Between 1.75 and 24.22 times more ozone was found to be formed during sowing seeds than during other processes for China 0 and China II agricultural machines.Total carbonyl compound emissions from agricultural machines in China was 19.23 Gg in 2019.The results improve our understanding of carbonyl compound emissions from agricultural machines in China.

Influence of flue gas cleaning system on characteristics of PM_(2.5)emission from coal-fired power plants

This study investigated the influence of precipitators and wet flue gas desulfurization equipment on characteristics of PM_(2.5)emission from coal-fired power stations.We measured size distribution and removal efficiencies,including hybrid electrostatic precipitator/bag filters(ESP/BAGs)which have rarely been studied.A bimodal distribution of particle concentrations was observed at the inlet of each precipitator.After the precipitators,particle concentrations were significantly reduced.Although a bimodal distribution was still observed,all peak positions shifted to the smaller end.The removal efficiencies of hybrid ESP/BAGs reached 99%for PM_(2.5),which is considerably higher than those for other types of precipitators.In particular,the influence of hybrid ESP/BAG operating conditions on the performance of dust removal was explored.The efficiency of hybrid ESP/BAGs decreased by 1.9%when the first electrostatic field was shut down.The concentrations and distributions of particulate matter were also measured in three coal-fired power plants before and after desulfurization devices.The results showed diverse removal efficiencies for different desulfurization towers.The reason for the difference requires further research.We estimated the influence of removal technology for particulate matter on total emissions in China.Substituting ESPs with hybrid ESP/BAGs could reduce the total emissions to 104.3 thousand tons,with 47.48 thousand tons of PM_(2.5).

Research on acoustic emission characteristics of local corrosion on Q235 steel

To solve the problem of corrosion acoustic emission （AE） source feature extraction and recognition, the AE detection validation and the amplitude-frequency characteristics were derived in theory. The amplitude of AE signal generated by bubble burst is proportional to its radius square and the liquid level, while the AE signal frequency is inversely proportional to the bubble radius. The AE signal amplitude of the steel and the steel corrosion product cracking is proportional to the local stress, and the AE signal frequency is proportional to the crack propagation velocity and inversely proportional to the crack propagation distance. Three Q235 specimens were separately immersed in the solution of 10% FeC13.6H20, 5% CuSOa.5H20 and 10% FeC13.6H20 with 0.01 mol/L HCL. The AE systems with high frequency and low frequency were used to detect the whole corrosion process AE signals. The AE signals of Q235 steel and the steel corrosion products cracking were detected as the verification experiment. The AE signals from different sources could be distinguished by AE hits count and the power spectrum. It is coincident with theoretical analysis. These conclusions have significant guidance for the corrosion detection and evaluation by on-line acoustic emission detecting.

Characteristics of Gas Emission at Super-Length Fully-Mechanized Top Coal Caving Face

Characteristics of gas emission at the K8206 working face in the Third mine of the Yangquan Coal Group were investigated. The effects of strata movement,advancing velocity of working face,production capacity of working face and gas extraction capability of strike high-level entry on gas emission at K8206 working face were analyzed. A regression equation,reflecting the relationship between relative gas emission rate and the production capacity of work-ing faces,was established. Another regression equation showing the relationship between the gas emission rate from adjacent layers when the working face was advancing for one metre and advancing velocity was derived. It can be con-cluded that,1) the amount of gas emitted at the K8206 working face is far greater than that of ordinary top coal caving faces with a dip length of 180-190 m; 2) the dynamic process of gas emission from adjacent layers during the initial mining stage is controlled by the movement of key strata; 3) the amount of gas emitted that needs to be forced out by air is greatly affected by the capability of gas extraction; 4) when the advancing velocity is between 3.5-5.5 m/d or when the output is up to 8-12 kt/d,the gas emission from adjacent layers is almost constant.

Electron Dynamics and Characteristics of Attosecond Electromagnetic Emissions in Relativistic Laser-Plasma Interactions

Generation of attosecond electromagnetic （EM） pulses and the associated electron dynamics are studied using particle-in-cell simulations of relativistic laser pulses interacting with over-dense plasma foil targets. The inter- action process is found to be so complicated even in the situation of utilizing driving laser pulses of only one cycle. Two electron bunches closely involved in the laser-driven wavebreaking process contribute to attosecond EM pulses through the coherent synchrotron emission process whose spectra are found to follow an exponential decay rule. Detailed investigations of electron dynamics indicate that the early part of the reflected EM emission is the high-harmonics produced through the relativistic oscillating mirror mechanism. High harmonics are also found to be generated through the Bremsstrahlung radiation by one electron bunch that participates in the wavebreaking process and decelerates when it experiences the local wavebreaking-generated high electrostatic field in the moving direction.

Mechanical behavior of 2G NPR bolt anchored rock samples under static disturbance loading

The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.

Preparation and Characterization of Storage and Emission Functional Material of Cs2O-doped 12CaO.7Al2O3

We provides a novel approach to generate low-temperature atomic oxygen anions （O-） emission using the cesium oxide-doped 12CaO.7Al2O3 （Cs2O-doped C12A7）. The maximal emission intensity of O- from the Cs2O-doped C12A7 at 700℃ and 800 V/cm reached about 0.54μA/cm2, which was about two times as strong as that from the un-doped C12A7 （0.23 μA/cm2） under the same condition. The initiative temperature of the O- emission from the Cs2O-doped C12A7 was about 500 ℃, which was also much lower than the initiative temperature from the un-doped C12A7 （570 ℃） in the given field of 800 V/cm. High pure O- emission close to 100% could be obtained from the Cs2O-doped C12A7 under the lower temperature （〈550℃）. The emission features of the Cs2O-doped C12A7, including the emission distribution, temperature effect, and emission branching ratio have been investigated in detail and compared with the un-doped C12A7. The structure and storage characteristics of the resulting material were also investigated via X-ray diffraction and electron paramagnetic resonance. It was found that doping Cs2Oto C12A7 will lower the initiative emission temperature and enhance the emission intensity

Discharge Modes Suggested by Emission Spectra of Nitrogen Dielectric Barrier Discharge with Wire-Cylinder Electrodes

In this paper,nitrogen dielectric barrier discharge（DBD） plasma was generated in a quartz tube with coaxial wire-cylinder electrodes at atmospheric pressure.By varying the nitrogen gas flow（FN） in the range of 0-1 m3/h,the plasma optical emission spectra（OES） were measured and studied.The vibration（T_（vib）） and rotation temperature（T_（rot）） of nitrogen were obtained,by fitting the rovibronic bands of N_2（C^3∏_u-B^3∏_g,0-1）,and by the Boltzmann plot method for purposes of comparison.T_（vib） increased up to 2481 K with increasing nitrogen flow till0.2 m3/h,and then decreased with further increasing FN,while Trot decreased monotonously and approached to-350 K for FN ≥ 0.6 m^3/h.The intensity of N_2（C^3∏_u-B^3∏_g,0-0,1-0,0-3） and N_2~＋（B^2∑_u~＋-X^2Σ_g~＋,0-0） exhibited similar evolution with increasing FN to those of the T_（vib） and Trot,respectively.The discharge photos revealed that the discharge filaments gradually decreased with increasing FN,and eventually disappeared,which implied that a discharge mode transition emerged with increasing FN.The possible mechanism for the discharge mode transition is studied in detail according to the vibration（T_（vib）） and rotation temperature（T_（rot）） of nitrogen.

Experimental and numerical study of combustion characteristics of ammonia-hydrogen-air swirling flame with/without secondary air injection

Ammonia (NH_(3)) is currently considered to be a potential carbon-free alternative fuel,and its large-scale use as such would certainly decrease greenhouse gas emissions and meet increasingly stringent emission requirements.Although the low flame propagation speed and high NO production of NH_(3) hinder its direct application as a renewable fuel,co-combustion of NH_(3)–H_(2)is an effective way to overcome these challenges.In this study,the combustion characteristics of NH_(3)–H_(2)swirling flames under different equivalence ratios and H_2blending ratios conditions are both numerically and experimentally investigated.Numerically,the One-Dimensional (1D) laminar flame computation presents a comparison base and the Three-Dimensional (3D) numerical simulation yields detailed flame property distributions.Experimentally,the high-speed camera takes instantaneous swirl flame images and the gas analyzer measures the NO emission at the exit plane of the flame chamber.Qualitative and quantitative analysis is performed on the flame structure and NO emission for a series of NH_(3)–H_(2)swirl flames.The variation trends of the NO emission calculated using different techniques agree very well.The quantitative results show that the NO emissions are much higher at lean equivalence ratios than those at rich equivalence ratios,and such difference is closely related to the combustion flame structure.Moreover,it is shown that the utilization of secondary air injection can achieve a significant reduction in NO emissions at the exit of the combustion chamber at equivalence ratios less than or equal to 0.9.

Characteristics of rural domestic sewage discharge and their driving mechanisms: evidence from the Northern Region, China

The traits of rural domestic sewage emission are unclear,negatively affecting rural domestic sewage treatment and sewage management.This study used data from the Second National Pollution Source Census Bulletin to establish a data set.The spatial distribution characteristics and main factors influencing rural sewage discharge in the Northern Region were studied using spatial autocorrelation analysis and structural equations.The findings demonstrated that(l)a significant Spearman correlation between drainage water volume(DwV),chemical oxygen demand(COD),ammonia nitrogen(NH_(3)-N),total nitrogen(TN),and total phosphorus(TP)and that the correlation coefficients between DWV and COD,NH,-N,TNand TP were 0.87**,1.0**,0.99**,0.99**,respectively;(2)rural sewage discharge showed spatial autocorrelation,and rural domestic sewage discharge in the districts and counties with an administration was significantly higher than in the surrounding areas;and(3)social development was the main driver rural domestic sewage changes(path coefficient was 0.407**),and the main factors influencing rural domestic sewage discharge were the urbanization rate,years of education,and population age structure.This study obtained the spatial variation law and clarified the main influencing factors of rural domestic sewage to provide data support and a theoretical basis for subsequent rural sewage collection and treatment.Use of the Inner Mongolia Autonomous Region in northern China as a typical case,provides a theoretical foundation for scientific decision-making on rural domestic sewage treatment at the national and regional levels and offers new perspectives for managing pollutants.

Evolution of Regional Industrial Structure and Characteristics of Pollution Emissions in China

We conducted a quantitative analysis of the relationship between the evolution of China’s industrial structure and environmental change. Using the industrial structure characteristic bias index and data from 29 manufacturing industries in each province from 1995 to 2010, we described the impact of pollution-emission characteristics of industry structure on the regional environment. The results show that wastewater-discharged characteristic of industrial structure in the northwest and central areas declined from 1995-2010, but this trend has weakened. The industrial structure of southwest and southeast areas had a high level of solid waste discharge and a constantly strengthening trend in SO2 emissions. We also analyzed the growth and recession of each sector in eight regions in China from 1995 to 2010. Among the eight regions, the middle reach of the Yel ow River, and northwest and southwest China had a clear increasing trend of high pol ution industries;the eastern coast, southern coast, middle reach of the Yangtze River and northeastern China did not sustain an increase in high pollution industries. In addition, regression analysis modeling was used to analyze the impact of the evolution of industrial structure on the disparities of regional environmental effects. We found that regional industry structure was closely related to environmental quality, especially for western areas at lower stages of economic development. In the future, all regions must prevent and forefend the risk of environmental pollution in the update and adjustment of industrial structure.

Investigation of Automobile Driving Pattern on Real-Road Condition in Tianjin

Using a set of measuring system installed on a testing vehicle, 15 criterion numbers, which describe the details of vehicle′s driving pattern and emission characteristic on real road condition of Tianjin, are obtained from a large quantity of raw data. The results show that the characteristic of driving pattern in Tianjin is very different from that of ECE-15 and FTP-75. That is to say, neither of these two emission testing procedures is suitable in China. A new driving cycle is developed which is accordance with the driving pattern of Tianjin.This cycle can be used to evaluate the emission levels of vehicles under real-road condition in laboratory, and can be recommended as a testing procedure used in China.

Discharge instability in a plasma contactor

Like the hollow cathode,discharge instability also occurs during the operation of a plasma contactor.Voltage and current probes were employed to test the change of keeper voltage,keeper current,anode voltage,and anode current parameters with time under different working conditions.The anode current range corresponding to the discharge instability phenomenon is about 0.4 A to 1.2 A,and the emission characteristic curve in this area appears to bulge wherein the four parameters all produce different degrees of oscillation,the anode current oscillation being the greatest.Its waveform is considered to consist of a small-amplitude,high-frequency triangular wave and a large-amplitude,low-frequency sawtooth wave,and we have explained the shape of the wave.Each parameter shows hundreds of Hz in oscillation frequency and the phases of the four parameters appear to be regular.After fast Fourier transform processing,the frequency and amplitude of the main peak of the anode current oscillation tend to change with changes of the anode current,and there are differences in the trends under different keeper currents and xenon flows.