The differences of grain-refining effect between Sc and Ti additions in aluminum,which cannot be substantially explained by traditional theories,were carefully studied.The empirical electron theory(EET) of solids and ...The differences of grain-refining effect between Sc and Ti additions in aluminum,which cannot be substantially explained by traditional theories,were carefully studied.The empirical electron theory(EET) of solids and molecules was employed to calculate the valence electron structures(VES) of Al3Ti and Al3Sc.The conclusions can be drawn that,in the two alloys Al-Ti and Al-Sc,the different valence electron structures of Al3Ti and Al3Sc and the consequent differences of growth habit of the two particles,and the different interfacial electron density between particles and matrix fundamentally lead to the differences of grain-refining effect between Sc and Ti additions on aluminum and make Sr the better grain-refiner of aluminum.展开更多
By introducing the distribution probability of structural units in austenite contain- ing alloying elements and considering its effects on phase transformation, this paper establishes a calculation model of distributi...By introducing the distribution probability of structural units in austenite contain- ing alloying elements and considering its effects on phase transformation, this paper establishes a calculation model of distribution probability of structural units. A new valence electron structure (VES) parameter-transformation effect coefficient of alloying elements (HL), is defined and then studied both theoretically and ex- perimentally. The relationship between the parameter HL and the multiplying factor (the quenching capability factor) of alloying elements is studied. The results indi- cate that the two parameters (HL and the quenching capability factor) have the same variation characteristic and substance feature. Therefore, the multiplying factor virtually expresses the relative quantity of structural units in the alloying elements-containing austenite.展开更多
The valence electron structures of Sr- and Mg-doped LaGaO3 ceramics with different compositions were calculated by Empirical Electron Theory of Solids and Molecules （EET）. A criterion for the ionic conductivity was ...The valence electron structures of Sr- and Mg-doped LaGaO3 ceramics with different compositions were calculated by Empirical Electron Theory of Solids and Molecules （EET）. A criterion for the ionic conductivity was proposed, i.e. the 1/（nAnB） increases with increasing the ionic conductivity when x or y〈20% （in molar fraction）.展开更多
The valence electron structure (VES) of RuB2 and OsB2 were calculated by the empirical electron theory (EET) of solids and molecules and compared with the results derived from the first-principles calculations. The di...The valence electron structure (VES) of RuB2 and OsB2 were calculated by the empirical electron theory (EET) of solids and molecules and compared with the results derived from the first-principles calculations. The distributions of covalent electrons in different bonds indicate that B-B and B-Me have remarkably covalent bonding characters. Lattice electrons cruising around Me-Me layers are found to have great influences on electronic conductivity and high temperature plasticity. The ultra-high values of elastic constant Cn in the two compounds originate from close-packed covalent bonding along the c axis. Uneven bond strengths and distributions of covalent bonds, especially for B-Afe bonds, yield significant anisotropy. Low ratios of lattice electrons to covalent electrons suggest the intrinsic embrittlement in crystals. The fact that the calculated cohesive energies well agree with experimental results demonstrates the good suitability of the EET calculations in estimating cohesive energy for transition-metal borides.展开更多
hethesisanalysesthevalenceelectronstructuresof phase Γin Fe Zn transitionallayerof heat galvanized sheet used in cars by applying the Empirical Electron Theory of Solids andMolecules, and calculatesthebond energy o...hethesisanalysesthevalenceelectronstructuresof phase Γin Fe Zn transitionallayerof heat galvanized sheet used in cars by applying the Empirical Electron Theory of Solids andMolecules, and calculatesthebond energy ofthe major bondsand cohesiveenergy ofcrystals,from which we draw theconclusion:sincecrystal has alargercohesiveenergy, it has higherhardness, butsinceitsbondenergyisratherlow ,itiseasytobreak under pressurefrom out side, and thecrackiseasytocome up andspreadin phase Γ.展开更多
Covalent electrons substantially determine the intrinsic hardness of inorganic crystals. A hardness model is presented on the basis of the Empirical Electron Theory generated from Pauling’s covalent bond length equat...Covalent electrons substantially determine the intrinsic hardness of inorganic crystals. A hardness model is presented on the basis of the Empirical Electron Theory generated from Pauling’s covalent bond length equation and the bond length difference method. The calculated hardness values of inorganic crystals are in good agreement with experimental and other theoretical values. Covalent bond energy with polarity correction can be used as an intrinsic indicator linking microscopic electronic structure to macroscopic hardness. A simple mathematical processing of bond energy is performed to extend the model to multi-bonding or multi-component systems. It is also found that spatial distribution of covalent bonds has a great influence on the hardness of inorganic crystals.展开更多
基金Project(20050003042) supported by Research Fund for the Doctoral Program of Higher Education of China
文摘The differences of grain-refining effect between Sc and Ti additions in aluminum,which cannot be substantially explained by traditional theories,were carefully studied.The empirical electron theory(EET) of solids and molecules was employed to calculate the valence electron structures(VES) of Al3Ti and Al3Sc.The conclusions can be drawn that,in the two alloys Al-Ti and Al-Sc,the different valence electron structures of Al3Ti and Al3Sc and the consequent differences of growth habit of the two particles,and the different interfacial electron density between particles and matrix fundamentally lead to the differences of grain-refining effect between Sc and Ti additions on aluminum and make Sr the better grain-refiner of aluminum.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 50271009, 503334010)
文摘By introducing the distribution probability of structural units in austenite contain- ing alloying elements and considering its effects on phase transformation, this paper establishes a calculation model of distribution probability of structural units. A new valence electron structure (VES) parameter-transformation effect coefficient of alloying elements (HL), is defined and then studied both theoretically and ex- perimentally. The relationship between the parameter HL and the multiplying factor (the quenching capability factor) of alloying elements is studied. The results indi- cate that the two parameters (HL and the quenching capability factor) have the same variation characteristic and substance feature. Therefore, the multiplying factor virtually expresses the relative quantity of structural units in the alloying elements-containing austenite.
文摘The valence electron structures of Sr- and Mg-doped LaGaO3 ceramics with different compositions were calculated by Empirical Electron Theory of Solids and Molecules （EET）. A criterion for the ionic conductivity was proposed, i.e. the 1/（nAnB） increases with increasing the ionic conductivity when x or y〈20% （in molar fraction）.
文摘The valence electron structure (VES) of RuB2 and OsB2 were calculated by the empirical electron theory (EET) of solids and molecules and compared with the results derived from the first-principles calculations. The distributions of covalent electrons in different bonds indicate that B-B and B-Me have remarkably covalent bonding characters. Lattice electrons cruising around Me-Me layers are found to have great influences on electronic conductivity and high temperature plasticity. The ultra-high values of elastic constant Cn in the two compounds originate from close-packed covalent bonding along the c axis. Uneven bond strengths and distributions of covalent bonds, especially for B-Afe bonds, yield significant anisotropy. Low ratios of lattice electrons to covalent electrons suggest the intrinsic embrittlement in crystals. The fact that the calculated cohesive energies well agree with experimental results demonstrates the good suitability of the EET calculations in estimating cohesive energy for transition-metal borides.
文摘hethesisanalysesthevalenceelectronstructuresof phase Γin Fe Zn transitionallayerof heat galvanized sheet used in cars by applying the Empirical Electron Theory of Solids andMolecules, and calculatesthebond energy ofthe major bondsand cohesiveenergy ofcrystals,from which we draw theconclusion:sincecrystal has alargercohesiveenergy, it has higherhardness, butsinceitsbondenergyisratherlow ,itiseasytobreak under pressurefrom out side, and thecrackiseasytocome up andspreadin phase Γ.
基金supported by the National Science Foundation for Distin-guished Young Scholars of China (10725207)the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (10821201)
文摘Covalent electrons substantially determine the intrinsic hardness of inorganic crystals. A hardness model is presented on the basis of the Empirical Electron Theory generated from Pauling’s covalent bond length equation and the bond length difference method. The calculated hardness values of inorganic crystals are in good agreement with experimental and other theoretical values. Covalent bond energy with polarity correction can be used as an intrinsic indicator linking microscopic electronic structure to macroscopic hardness. A simple mathematical processing of bond energy is performed to extend the model to multi-bonding or multi-component systems. It is also found that spatial distribution of covalent bonds has a great influence on the hardness of inorganic crystals.
