A polarizing microscope,X-ray diffraction(XRD),fourier transform infrared spectrometer(FTIR),scanning electron microscope and energy dispersive spectrometer(SEM-EDS),X-ray photoelectron spectroscopy(XPS),and micro com...A polarizing microscope,X-ray diffraction(XRD),fourier transform infrared spectrometer(FTIR),scanning electron microscope and energy dispersive spectrometer(SEM-EDS),X-ray photoelectron spectroscopy(XPS),and micro computed tomography(Micro CT)were used to investigate the relation between the structure and properties of the composite.Meanwhile,the physical properties,mechanical properties and strength mechanism were researched.The experimental results show that the structure and morphology of coated phosphogypsum remain intact in the composite,which shows good compatibility and forms a clear interface layer of transition zone between the coated phosphogypsum and the matrix,conforming to the structure of particle reinforced inorganic composites.The emulsion coated phosphogypsum has a certain strengthening effect on the aluminous rock mineral polymer composite.The compressive strength of the composite can reach 16.5 MPa when the amount of coated phosphogypsum is 40%,and the apparent density is 1.75 g·cm^(-3),which is significantly lower than that of common concrete;the thermal stability of the composite is also improved to a certain extent.Some certain chemical reactions occur in the process of forming the matrix of aluminous rock mineral polymer materials,with a structure of three-dimensional network.The research will provide a new way for the comprehensive utilization of phosphogypsum and low-grade aluminous rock.展开更多
In order to prepare cellulose nanocrystals( CNCs)-coated polylactide( PLA) microspheres for the use of drug delivery and tissue engineering,a Pickering emulsion route was applied. The stable Pickering emulsions were p...In order to prepare cellulose nanocrystals( CNCs)-coated polylactide( PLA) microspheres for the use of drug delivery and tissue engineering,a Pickering emulsion route was applied. The stable Pickering emulsions were prepared using CNCs as efficient stabilizers without any additional surfactant. The microspheres were successfully fabricated after volatilization of the solvent. What's more,the size of microspheres could be controlled by fabrication parameters.展开更多
Twice-painting technique was adopted to prepare heavy-duty anticorrosive coating films formed by aqueous latexes of copolymers of vinylidene chloride（VDC） with an acrylate, namely methyl acrylate（MA）, ethyl acryl...Twice-painting technique was adopted to prepare heavy-duty anticorrosive coating films formed by aqueous latexes of copolymers of vinylidene chloride（VDC） with an acrylate, namely methyl acrylate（MA）, ethyl acrylate（EA）, butyl acrylate（BA） or 2-ethylhexyl acrylate（EHA）. Harsh salt-spray corrosion tests demonstrated that the optimized twicepainting technique was that the acidic latex solution was adjusted to p H 5-6 for the first painting, while it was utilized directly for the second painting. The test of 600 h of harsh salt-spray corrosion showed that MA-VDC85 coating could protect the steel excellently, whereas the other acrylate-VDC coatings with 75%-90% VDC content could not protect the steel so effectively. Further corrosion test showed that（1） MA-VDC85 coating protected steel from loss of metallic luster for at least 1000 h of salt-spray corrosion;（2） adhesion of MA-VDC85 coating to steel was excellent for at least 800 h of saltspray corrosion, but became very poor after 1000 h. Differential scanning calorimetry, thermogravimetric analysis, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy were used to evaluate the corroded MA-VDC85 film.展开更多
基金Funded by the Science and Technology Support Plan of Guizhou Province(No.[2021]482)the Provincial University Joint Fund Project of Guizhou Science and Technology agency(No.[2014]7656)+1 种基金the Science and Technology Plan Project of Guizhou Province(No.[2020]1Z045)the Chunhui Plan of the National Department of Education of China(No.Z2006-1-52003)。
文摘A polarizing microscope,X-ray diffraction(XRD),fourier transform infrared spectrometer(FTIR),scanning electron microscope and energy dispersive spectrometer(SEM-EDS),X-ray photoelectron spectroscopy(XPS),and micro computed tomography(Micro CT)were used to investigate the relation between the structure and properties of the composite.Meanwhile,the physical properties,mechanical properties and strength mechanism were researched.The experimental results show that the structure and morphology of coated phosphogypsum remain intact in the composite,which shows good compatibility and forms a clear interface layer of transition zone between the coated phosphogypsum and the matrix,conforming to the structure of particle reinforced inorganic composites.The emulsion coated phosphogypsum has a certain strengthening effect on the aluminous rock mineral polymer composite.The compressive strength of the composite can reach 16.5 MPa when the amount of coated phosphogypsum is 40%,and the apparent density is 1.75 g·cm^(-3),which is significantly lower than that of common concrete;the thermal stability of the composite is also improved to a certain extent.Some certain chemical reactions occur in the process of forming the matrix of aluminous rock mineral polymer materials,with a structure of three-dimensional network.The research will provide a new way for the comprehensive utilization of phosphogypsum and low-grade aluminous rock.
基金National Key Technology R&D Program of China(No.2014BAC13B02)National Natural Science Foundation of China(No.51403035)+1 种基金Programme of Introducing Talents of Discipline to Universities,China(No.105-07-005735)the Fundamental Research Funds for the Central Universities,China(No.15D110510)
文摘In order to prepare cellulose nanocrystals( CNCs)-coated polylactide( PLA) microspheres for the use of drug delivery and tissue engineering,a Pickering emulsion route was applied. The stable Pickering emulsions were prepared using CNCs as efficient stabilizers without any additional surfactant. The microspheres were successfully fabricated after volatilization of the solvent. What's more,the size of microspheres could be controlled by fabrication parameters.
基金financially supported by the Program for New Century Excellent Talents in Universitiesthe National Natural Science Foundation of China(No.21074088)
文摘Twice-painting technique was adopted to prepare heavy-duty anticorrosive coating films formed by aqueous latexes of copolymers of vinylidene chloride（VDC） with an acrylate, namely methyl acrylate（MA）, ethyl acrylate（EA）, butyl acrylate（BA） or 2-ethylhexyl acrylate（EHA）. Harsh salt-spray corrosion tests demonstrated that the optimized twicepainting technique was that the acidic latex solution was adjusted to p H 5-6 for the first painting, while it was utilized directly for the second painting. The test of 600 h of harsh salt-spray corrosion showed that MA-VDC85 coating could protect the steel excellently, whereas the other acrylate-VDC coatings with 75%-90% VDC content could not protect the steel so effectively. Further corrosion test showed that（1） MA-VDC85 coating protected steel from loss of metallic luster for at least 1000 h of salt-spray corrosion;（2） adhesion of MA-VDC85 coating to steel was excellent for at least 800 h of saltspray corrosion, but became very poor after 1000 h. Differential scanning calorimetry, thermogravimetric analysis, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy were used to evaluate the corroded MA-VDC85 film.
