Alternative Respiration Induced by Glucose Stimulation and Variation of Adenylate Energy Charge in Glucose-Starved Cells of Green Alga Chlorella Protothecoides

Effects of inhibitors and glucose on cytochrome and alternative respiration and on adenylate energy charge (AEC) in glucose starved Chlorella protothecoides were investigated. 1 mmol/L azide (NaN 3), which immediately caused an increase of O 2 uptake by inhibiting the cytochrome pathway and stimulating alternative respiration, resulted in a decrease of AEC value from 0.83 to 0.34 within 3 minutes. When 1 mmol/L salicylhydroxamic acid (SHAM) was added into the cell suspension, there was no apparent variation in AEC. Adding NaN 3 and SHAM together into cell suspension to inhibit both cytochrome and alternative pathways showed a same change of AEC as that of adding NaN 3 alone. When 2.0 mmol/L of glucose was added to a suspension of glucose starved cells, the O 2 uptake rate was immediately stimulated from 0.81 up to 1.34 [μmol/L O 2[DK]·min -1 ·(mL PCV) -1 ]. The respiration stimulated by glucose could be inhibited about 20% by adding 1 mmol/L SHAM. It was found by titration with SHAM in the absence and presence of NaN 3 that 53% of O 2 uptake went through the cytochrome pathway and 45% of the alternate pathway was operational in enhanced respiration. It implied that induced operation of the alternative respiratory pathway probably resulted from the burst of the electron flux into the electron transport chain by glucose stimulation. . The respiration stimulated by glucose could be inhibited about 20% by adding 1 mmol/L SHAM. It was found by titration with SHAM in the absence and presence of NaN 3 that 53% of O 2 uptake went through the cytochrome pathway and 45% of the alternate pathway was operational in enhanced respiration. It implied that induced operation of the alternative respiratory pathway probably resulted from the burst of the electron flux into the electron transport chain by glucose stimulation.

Charge and Energy Transfer in the Metal-free Indoline Dyes for Dye-sensitized Solar Cells

Metal-free indoline dyes for dye-sensitized solar cells were studied by employing quantum chemistry methods. Comparative study of the properties of both ground and excited states of metal-free indoline dyes for dye-sensitized solar cells revealed： （i） as the number of rhodanine rings increases, the energy difference between HOMO and LUMO decreases and there is a red shift in the absorption spectrum with the binding energy increased, and the transition dipole moment decreased; （ii） Based on an analysis of charge differential density, we observed that the charge and energy are transfered from the phenylethenyl to the indoline and rhodanine rings; （iii） The electron-hole coherences are mainly on the indoline and rhodanine rings, and the exciton sizes are 30 and 40 atoms for indoline dyes with one and two rhodanline rings, respectively. These results serve as a good example of computer-aided design in metal-free indoline dyes for dye-sensitized solar cells.

Ultraconformable Integrated Wireless Charging Micro-Supercapacitor Skin

Conformable and wire-less charging energy storage devices play important roles in enabling the fast development of wearable,non-contact soft electronics.However,current wire-less charging power sources are still restricted by limited flexural angles and fragile connection of components,resulting in the failure expression of performance and constraining their fur-ther applications in health monitoring wearables and moveable artificial limbs.Herein,we present an ultracompatible skin-like integrated wireless charging micro-supercapacitor,which building blocks(including electrolyte,electrode and substrate)are all evaporated by liquid precursor.Owing to the infiltration and permeation of the liquid,each part of the integrated device attached firmly with each other,forming a compact and all-in-one configuration.In addition,benefitting from the controllable volume of electrode solution precursor,the electrode thickness is easily regulated varying from 11.7 to 112.5μm.This prepared thin IWC-MSC skin can fit well with curving human body,and could be wireless charged to store electricity into high capacitive micro-supercapacitors(11.39 F cm-3)of the integrated device.We believe this work will shed light on the construction of skin-attachable electronics and irregular sensing microrobots.

Calculatons of the Electron Radius

Equating the Rest Mass Energy of a free electron to its Rest Charge Energy we prove that the electron cannot be a dimensionless point particle because if it were dimensionless, it would contain an infinite amount of Rest Charge Energy at the location of its charge since r = 0 gives , which is clearly not possible. Since the electron has no internal structure, equating its Rest Mass Energy to its Rest Charge Energy, we calculate the electron to be a sphere of radius 4.68 × 10-16 meters. We calculate the Electric Field at the surface of the electron due to its charge and the Repulsive Force two electrons in proximity exert on each other.

Electrode Erosion of a High Energy Impulse Spark Gap Switch

Based on the principle of thermal conduction, three metal alloys （stainless steel, copper-tungsten and graphite） were chosen as the material of the high impulse current discharging switch. Experimental results indicate that the mass loss and surface erosion morphology of the electrode are related with the electrode material （conductivity σ, melting point Tin, density p and thermal capacity c） and the impulse transferred charge （or energy） per impulse for the same total impulse transferred charge. The experimental results indicate that the mass loss of stainless steel, copper-tungsten and graphite are 380.10 μg/C, 118.10 μg/C and 81.90 μg/C respectively under the condition of a total impulse transferred charge of 525 C and a transferred charge per impulse of 10.5 C. Under the same impulse transferred charge, the mass loss of copper-tungsten（118.10 μg/C） with the transferred charge per impulse at 10.5 C is far larger than the mass loss （38.61μg/C） at a 1.48 C transferred charge per impulse. The electrode erosion mechanism under high energy impulse arcs is analyzed briefly and it is suggested that by selecting high conductive metal or metal alloy as the electrode material of a high energy impulse spark gap switch and setting high erosion resistance material at the top of the electrode, the mass loss of the electrode can be reduced and the life of the switch prolonged.

Unified Hydrodynamics and Pseudorapidity Distributions of Charged Particles Produced in Heavy Ion Collisions at Low Energies at RHIC

In the context of unified hydrodynamics, we discuss the pseudorapidity distributions of the charged particles produced in Au-Au and Cu-Cu collisions at the low RHIC energies of √SNN = 19.6 and 22.4 GeV, respectively. It is found that the unified hydrodynamics alone can give a good description to the experimental measurements. This is different from the collisions at the maximum RHIC energy of √SNN = 200 GeV or at LHC energy of √SNN= 2.76 TeV, in which the leading particles must be taken into account so that we can properly explain the experimental observations.

Design of the Mobile Phone Charging Device based on Human Motion Energy and Light Energy

This paper designs a mechanical swing of placementing mobile phone, which is inspired by the mechanical watch automatic winding process. The use of the kinetic energy generated by human body motion drives the wheel swing and the generator, it can carry out mobile phone additional charge through the electronic components rectifier and DC/DC converter regulator, the use of human motion and light energy can extend a fixed charge mobile phone standby time. The human motion power uses electromagnetic coupling technique and collects energy by using foot swing, solar power generation uses DSP chip in TMS320F28927 control a plurality of charging circuit, inverter circuit and solar maximum power point tracking by sampling and multiple output PWM wave. Finally, charging process has the basic constant current process discovered by device testing, the design of human motion and light energy mobile phone charger can satisfy the need of mobile phone rechargeable lithium batteries.

Mesoporous molecular sieve confined phase change materials with high absorption,enhanced thermal conductivity,and cooling energy charging/discharging capacity

The biggest challenge for organic phase change materials(PCMs)used in cold energy storage is to maintain high heat storage capacity while reducing the leakage risk of PCMs during the phase transition process.This is crucial for expanding their applications in the more demanding cold storage field.In this study,novel formstable low-temperature composite PCMs are prepared with mesoporous materials,namely SBA-15 and CMK-3(which are prepared using the template method),as supporting matrices and dodecane as the PCM.Owing to the combined effects of capillary forces within mesoporous materials and interactions among dodecane molecules,both dodecane/SBA-15 and dodecane/CMK-3 exhibit outstanding shape stability and thermal cycling stability even after 200 heating/cooling cycles.In comparison to those of dodecane/SBA-15,dodecane/CMK-3 exhibits superior cold storage performance and higher thermal conductivity.Specifically,the phase transition temperature of dodecane/CMK-3 is-8.81℃ with a latent heat of 122.4 J·g^(-1).Additionally,it has a thermal conductivity of 1.21 W·m^(-1)·K^(-1),which is 9.45 times that of dodecane alone.All these highlight its significant potential for applications in the area of cold energy storage.

Interfacial charge and energy transfer in van der Waals heterojunctions

Van der Waals heterojunctions are fast-emerging quantum structures fabricated by the controlled stacking of two-dimensional(2D)materials.Owing to the atomically thin thickness,their carrier properties are not only determined by the host material itself,but also defined by the interlayer interactions,including dielectric environment,charge trapping centers,and stacking angles.The abundant constituents without the limitation of lattice constant matching enable fascinating electrical,optical,and magnetic properties in van der Waals heterojunctions toward next-generation devices in photonics,optoelectronics,and information sciences.This review focuses on the charge and energy transfer processes and their dynamics in transition metal dichalcogenides(TMDCs),a family of quantum materials with strong excitonic effects and unique valley properties,and other related 2D materials such as graphene and hexagonalboron nitride.In the first part,we summarize the ultrafast charge transfer processes in van der Waals heterojunctions,including its experimental evidence and theoretical understanding,the interlayer excitons at the TMDC interfaces,and the hot carrier injection at the graphene/TMDCs interface.In the second part,the energy transfer,including both Förster and Dexter types,are reviewed from both experimental and theoretical perspectives.Finally,we highlight the typical charge and energy transfer applications in photodetectors and summarize the challenges and opportunities for future development in this field.

Wire-Shaped 3D-Hybrid Supercapacitors as Substitutes for Batteries

We report a wire-shaped three-dimensional(3D)-hybrid supercapacitor with high volumetric capacitance and high energy density due to an interconnected 3D-configuration of the electrode allowing for large number of electrochemical active sites,easy access of electrolyte ions,and facile charge transport for flexible wearable applications.The interconnected and compact electrode delivers a high volumetric capacitance(gravimetric capacitance)of 73 F cm−3(2446 F g−1),excellent rate capability,and cycle stability.The 3D-nickel cobalt-layered double hydroxide onto 3D-nickel wire(NiCo LDH/3D-Ni)//the 3D-manganese oxide onto 3D-nickel wire(Mn3O4/3D-Ni)hybrid supercapacitor exhibits energy density of 153.3 Wh kg−1 and power density of 8810 W kg−1.The red lightemitting diode powered by the as-prepared hybrid supercapacitor can operate for 80 min after being charged for tens of seconds and exhibit excellent electrochemical stability under various deformation conditions.The results verify that such wire-shaped 3D-hybrid supercapacitors are promising alternatives for batteries with long charge–discharge times,for smart wearable and implantable devices.

Energy Management Strategy for Hybrid Electric Vehicle Based on System Efficiency and Battery Life Optimization

A novel method to calculate fuel-electric conversion factor for full hybrid electric vehicle（HEV）equipped with continuously variable transmission（CVT）is proposed.Based on consideration of the efficiency of pivotal components,electric motor,system efficiency optimization models are developed.According to the target of instantaneous optimization of system efficiency,operating ranges of each mode of power-train are determined,and the corresponding energy management strategies are established.The simulation results demonstrate that the energy management strategy proposed can substantially improve the vehicle fuel economy,and keep battery state of charge（SOC）change in a reasonable variation range.

Through-Space Conjugation: A Thriving Alternative for Optoelectronic Materials

Efficient electronic coupling is the key to constructing optoelectronic functionalπsystems.Generally,the delocalization ofπelectrons must comply with the framework constructed by covalent bonds(typicallyσbonds),representing classic through-bond conjuga-tion.However,through-space conjugation offers an alternative that achieves spatial electron communica-tionwith closely stacked π systems instead of covalent bonds thus enabling multidimensional energy and charge transport.

Nanocrystal-semiconductor interface： Atomic-resolution cross-sectional transmission electron microscope study of lead sulfide nanocrystal quantum dots on crystalline silicon

We report on a cross-sectional high resolution transmission electron microscope study of lead sulfide nanocrystal quantum dots （NCQDs） dispersed on electron-transparent silicon nanopillars that enables nearly atomically-resolved simultaneous imaging of the entire composite： the quantum dot, the interfacial region, and the silicon substrate. Considerable richness in the nanocrystal shape and orientation with respect to the substrate lattice is observed. The average NCQD-substrate separation is found to be significantly smaller than the length of the ligands on the NCQDs. Complementary photoluminescence measurements show that light emission from PbS NCQDs on silicon is effectively quenched which we attribute to intrinsic mechanisms of energy and charge transfer from PbS NCQDs to Si.

Development of electron and hole selective contact materials for perovskite solar cells

Nowadays,both n-i-p and p-i-n perovskite solar cells（PSCs） device structures are reported to give high performance with photo conversion efficiencies（PCEs） above 20%.The efficiency of the PSCs is fundementally determined by the charge selective contact materials.Hence,by introducing proper contact materials with good charge selectivity,one could potentially reduce interfacial charge recombination as well as increase device performance.In the past few years,copious charge selective contact materials have been proposed.Significant improvements in the corresponding devices were observed and the reported PCEs were close to that of classic Spiro-OMeTAD.This mini-review summarizes the state-of-the-art progress of typical electron/hole selective contact materials for efficient perovskite solar cells and an outlook to their development is made.