A Study of Energy Conversion Efficiency Versus Plasma Density by Lower Hybrid Current Drive in HT-7 Tokamak

Ramp-up experiments by means of lower hybrid wave on HT-7 superconducting tokamak have been performed and analyzed. A ramp-up rate of over 300 kA/s is obtained and a conversion efficiency of over 1.0% has been achieved during the ramp-up phase. The study of the dependence of conversion efficiency on plasma density shows that the conversion efficiency is affected by the driven current, which is mainly dominated by the competition of impurity concentration with wave accessibility condition. In addition, the effect of current profile may play an important role in determining the conversion efficiency.

Enhanced Perturb and Observe Control Algorithm for a Standalone Domestic Renewable Energy System

The generation of electricity,considering environmental and eco-nomic factors is one of the most important challenges of recent years.In this article,a thermoelectric generator(TEG)is proposed to use the thermal energy of an electric water heater(EWH)to generate electricity independently.To improve the energy conversion efficiency of the TEG,a fuzzy logic con-troller(FLC)-based perturb&observe(P&O)type maximum power point tracking(MPPT)control algorithm is used in this study.An EWH is one of the major electricity consuming household appliances which causes a higher electricity price for consumers.Also,a significant amount of thermal energy generated by EWH is wasted every day,especially during the winter season.In recent years,TEGs have been widely developed to convert surplus or unused thermal energy into usable electricity.In this context,the proposed model is designed to use the thermal energy stored in the EWH to generate electricity.In addition,the generated electricity can be easily stored in a battery storage system to supply electricity to various household appliances with low-power-consumption.The proposed MPPT control algorithm helps the system to quickly reach the optimal point corresponding to the maximum power output and maintains the system operating point at the maximum power output level.To validate the usefulness of the proposed scheme,a study model was developed in the MATLAB Simulink environment and its performance was investigated by simulation under steady state and transient conditions.The results of the study confirmed that the system is capable of generating adequate power from the available thermal energy of EWH.It was also found that the output power and efficiency of the system can be improved by maintaining a higher temperature difference at the input terminals of the TEG.Moreover,the real-time temperature data of Abha city in Saudi Arabia is considered to analyze the feasibility of the proposed system for practical implementation.

Maximum initial primary wave model for low-Froude-number reservoir landslides based on wave theory

The impulse waves induced by large-reservoir landslides can be characterized by a low Froude number.However,systematic research on predictive models specifically targeting the initial primary wave is lacking.Taking the Shuipingzi 1#landslide that occurred in the Baihetan Reservoir area of the Jinsha River in China as an engineering example,this study established a large-scale physical model(with dimensions of 30 m×29 m×3.5 m at a scale of 1:150)and conducted scaled experiments on 3D landslide-induced impulse waves.During the process in which a sliding mass displaced and compressed a body of water to generate waves,the maximum initial wave amplitude was found to be positively correlated with the sliding velocity and the volume of the landslide.With the increase in the water depth,the wave amplitude initially increased and then decreased.The duration of pressure exertion by the sliding mass at its maximum velocity directly correlated with an elevated wave amplitude.Based on the theories of low-amplitude waves and energy conservation,while considering the energy conversion efficiency,a predictive model for the initial wave amplitude was derived.This model could fit and validate the functions of wavelength and wave velocity.The accuracy of the initial wave amplitude was verified using physical experiment data,with a prediction accuracy for the maximum initial wave amplitude reaching 90%.The conversion efficiency(η)directly determined the accuracy of the estimation formula.Under clear conditions for landslide-induced impulse wave generation,estimating the value ofηthrough analogy cases was feasible.This study has derived the landslide-induced impulse waves amplitude prediction formula from the standpoints of wave theory and energy conservation,with greater consideration given to the intrinsic characteristics in the formation process of landslide-induced impulse waves,thereby enhancing the applicability and extensibility of the formula.This can facilitate the development of empirical estimation methods for landslide-induced impulse waves toward universality.

Symmetric Brownian motor subjected to Lévy noise

In the past few years,attention has mainly been focused on the symmetric Brownian motor(BM)with Gaussian noises,whose current and energy conversion efficiency are very low.Here,we investigate the operating performance of the symmetric BM subjected to Lévy noise.Through numerical simulations,it is found that the operating performance of the motor can be greatly improved in asymmetric Lévy noise.Without any load,the Lévy noises with smaller stable indexes can let the motor give rise to a much greater current.With a load,the energy conversion efficiency of the motor can be enhanced by adjusting the stable indexes of the Lévy noises with symmetry breaking.The results of this research are of great significance for opening up BM’s intrinsic physical mechanism and promoting the development of nanotechnology.

Width effects on hydrodynamics of pendulum wave energy converter

Based on two- and three-dimensional potential flow theories, the width effects on the hydrodynamics of a bottom-hinged trapezoidal pendulum wave energy converter are discussed. The two-dimensional eigenfunction expansion method is used to obtain the diffraction and radiation solutions when the converter width tends to be infinity. The trapezoidal section of the converter is approximated by a rectangular section for simplification. The nonlinear viscous damping effects are accounted for by including a drag term in the two- and three-dimensional methods. It is found that the three- dimensional results are in good agreement with the two-dimensional results when the converter width becomes larger, especially when the converter width is infinity, which shows that both of the methods are reasonable. Meantime, it is also found that the peak value of the conversion efficiency decreases as the converter width increases in short wave periods while increases when the converter width increases in long wave periods.

Electrokinetic energy conversion of electro-magneto-hydro-dynamic nanofluids through a microannulus under the time-periodic excitation

In this work,the effects of externally applied axial pressure gradients and transverse magnetic fields on the electrokinetic energy conversion(EKEC)efficiency and the streaming potential of nanofluids through a microannulus are studied.The analytical solution for electro-magneto-hydro-dynamic(EMHD)flow is obtained under the condition of the Debye-Huuckel linearization.Especially,Green’s function method is used to obtain the analytical solutions of the velocity field.The result shows that the velocity distribution is characterized by the dimensionless frequency?,the Hartmann number Ha,the volume fraction of the nanoparticlesφ,the geometric radius ratio a,and the wallζpotential ratio b.Moreover,the effects of three kinds of periodic excitations are compared and discussed.The results also show that the periodic excitation of the square waveform is more effective in increasing the streaming potential and the EKEC efficiency.It is worth noting that adjusting the wallζpotential ratio and the geometric radius ratio can affect the streaming potential and the EKEC efficiency.

On the energy conversion in electrokinetic transports

Energy conversion in micro/nano-systems is a subject of current research,among which the electrokinetic energy conversion has attracted extensive attention.However,there exist two different definitions on the electrokinetic energy conversion efficiency in literature.A few researchers defined the efficiency using the pure pressure-driven flow rate,while other groups defined the efficiency based on the flow rate with the inclusion of the effect of the streaming potential field.In this work,both definitions are investigated for different fluid types under the periodic electrokinetic flow condition.For Newtonian fluids,the two definitions give similar results.However,for viscoelastic fluids,these two definitions lead to significant difference.The efficiency defined by the pure pressure-driven flow rate even exceeds 100%in a certain range of the parameters.The result shows that in the case of viscoelastic flow,it is incorrect to define the energy conversion efficiency by pure pressure-driven flow rate.At the same time,the reason for this problem is clarified through comprehensive analysis.

An Experimental Study on A Trapezoidal Pendulum Wave Energy Converter in Regular Waves

Experimental studies were conducted on a trapezoidal pendulum wave energy converter in regular waves. To obtain the incident wave height, the analytical method （AM） was used to separate the incident and reflected waves propagating in a wave flume by analysing wave records measured at two locations. The response amplitude operator （RAO）, primary conversion efficiency and the total conversion efficiency of the wave energy converter were studied; furthermore, the power take-off damping coefficients corresponding to the load resistances in the experiment were also obtained. The findings demonstrate that the natural period for a pendulum wave energy converter is relatively large. A lower load resistance gives rise to a larger damping coefficient. The model shows relatively higher wave energy conversion efficiency in the range of 1.0-1.2 s for the incident wave period. The maximum primary conversion efficiency achieved was 55.5%, and the maximum overall conversion efficiency was 39.4%.

Influence of iron powder content on the electromagnetic and mechanical performance of soft magnetic geopolymer composite

In the induction heating of airport pavement to remove snow and ice,soft magnetic geopolymer composite(SMGC)can be used to gather the dissipated electromagnetic energy,thus enhancing the energy utilization efficiency.The aim of this work is to analyze the influence mechanism of iron powder content on the electromagnetic and mechanical performance of SMGC,so as to provide theoretical guidance for the design of soft magnetic layer within airport pavement structure.The results show that the increase of iron powder content reduces the resistance and magnetoresistance of SMGC by decreasing the content of non-magnetic phases between iron powder.However,the reduction of iron powder spacing also provides a shorter transmission path for the inter-particle eddy currents in the SMGC specimen,which enhances the exchange coupling between iron powder,thus increasing the electromagnetic loss.Therefore,the compatibility between magnetic permeability and electromagnetic loss should be considered comprehensively in the mix design of SMGC.In addition,although iron powder can enhance the mechanical properties of SMGC by improving the density of geopolymer matrix,the excessive amount of iron powder can lead to a weak interfacial transition zone between geopolymer matrix and iron powder.According to the induction heating results,optimized SMGC can improve the energy transfer efficiency of induction heating by 24.03%.

The optimization research on the coupled of active and passive energy supplying in public institutions in China

The building sector is one of the largest energy user and carbon emitters globally.To increase the utilization rate of renewable energy and reduce carbon dioxide emissions,the optimal technical scheme of active public institutions and coupled utilization of renewable energy is studied.In this study,the energy consumption of three types of public institutions in various regions of China was simulated by using DeST building energy consumption software,combined with energy conversion efficiency and data released by the National Bureau of Statistics,and the total energy demand and total energy supply of public institutions were predicted using the load density method.Based on the coupling mechanism of the MARKAL model,the optimal proportion of renewable energy in the energy supply of public buildings in different regions is determined.Through the study of the number of public institutions in various regions of China,energy consumption characteristics,construction area,and other related data,the reverse energy flow method is creatively proposed,and the active and renewable energy coupling algorithm from the energy demand side of public institutions to the energy supply side is established.The results show that the central region has the highest utilization rate of renewable energy in the public sector,reaching 36.18%.The use of renewable energy in public buildings in hot summer and warm winter zones decreased to 35.08%,and it was 12.82% in cold zones.By 2025,the proportion of renewable energy resources in China is expected to reach 29.2%.The energy coupling model and algorithm constructed in this paper can provide a basis for the coupling macro configuration of renewable energy in public institutions in China.

Photoinhibition and Photooxidation in Leaves of indica and japonica Rice Under Different Temperatures and Light Intensities

Physiological indices related to the efficiency (F-v/F-m) of light energy conversion in PS II and the peroxidation of membrane lipid were measured in leaves of Oryza sativa L. sp. indica rice cv. 'Shanyou 63' and sp. japonica rice cv. '9516'' under different temperatures and fight intensities for 4 days. No changes in F-v/F-m and membrane lipid peroxidation product (MDA) were observed, so neither photoinhibition nor photooxidation happened in both rice cultivars under moderate temperature and medium light intensity. However, F-v/F-m dropped obviously with no change in MDA contents, and photoinhibition appeared in indica rice cv. 'Shanyou 63' under medium temperature and strong light intensity. Furthermore, both photoinhibition and photooxidation were observed in two rice cultivars under chilling temperature and strong light intensity. Experiments with inhibitors under chilling temperature and strong light intensity showed that indica rice had a decrease in DI protein content and SOD activity, and the extent of inhibition of xanthophyll. cycle and nonphotochemical quenching (qN) was larger, and a higher level of MDA was observed. The photoinhibition and photooxidation in indica rice were more distinct as compared with japonica rice. The authors suggested that PS II light energy conversion efficiency (F-v/F-m) and membrane lipid peroxidation were the key indices for the detection of photooxidation.

Ultrafast Spectral Studies of the Primary Processes of Photosynthesis in Spinach and Water Hyacinth Leaves

The authors have studied the spectroscopic characteristics and the fluorescence lifetime for the chloroplasts from spinach (Spinacia oleracea L.) and water hyacinth (Eichhornia crassipes (Mart) Solms.) plant leaves by absorption spectra, low temperature steady_state fluorescence spectroscopy and single photon counting measurement under the same conditions. The absorption spectra at room temperature for the spinach and water hyacinth chloroplasts are similar, which show that different plants can efficiently absorb light of same wavelength. The low temperature steady_state fluorescence spectroscopy for the water hyacinth chloroplast reveals a poor balance of photon quantum between two photosystems. The fluorescence decays in PSⅡ measured at the natural Q A state for the chloroplasts have been fitted by a three_exponential kinetic model. The slow lifetime fluorescence component is assigned to a collection of associated light harvesting Chl a/b proteins, the fast lifetime component to the reaction center of PSⅡ and the middle lifetime component to the delay fluorescence of recombination of P + 680 and Pheo -. The excited energy conversion efficiency (η) in PSⅡ RC is 87% and 91% respectively for the water hyacinth and spinach chloroplasts calculated on the 20 ps model. This interesting result is not consistent with what is assumed that the efficiency is 100% in PSⅡ RC. The results in this paper also present a support for the 20 ps electron transfer time constant in PSⅡ RC. On the viewpoint of excitation energy conversion efficiency, the growing rate for the water hyacinth plan is smaller than that for the spinach plant. But, authors' results show those plants can perform highly efficient transfer of photo_excitation energy from the light_harvesting pigment system to the reaction center (approximately 100%).

Numerical study of effect of front cavity on hydrogen/air premixed combustion in a micro-combustion chamber

The micro-combustion chamber is the key component for micro-TPV systems. To improve the combustor wall temperature level and its uniformity and efficiency, an improved flat micro-combustor with a front cavity is built, and the combustion performance of the original and improved combustors of premixed H2/air flames under various inlet velocities and equivalence ratios is numerically investigated. The effects of the front cavity height and length on the outer wall temperature and efficiency are also discussed. The front cavity significantly improves the average outer wall temperature, outer wall temperature uniformity, and combustion efficiency of the micro-combustor, increases the area of the high temperature zone, and enhances the heat transfer between the burned blends and inner walls. The micro-combustor with the front cavity length of 2.0 mm and height of 0.5 mm is suitable for micro-TPV system application due to the relatively high outer wall temperature, combustion efficiency, and the most uniform outer wall temperature.

Energy Conversion Efficiency of Rainbow Shape Piezoelectric Transducer

With the aim to enhance the energy conversion efficiency of the rainbow shape piezoelectric transducer, an analysis model of energy conversion efficiency is established based on the elastic mechanics theory and piezoelectricity theory. It can be found that the energy conversion efficiency of the rainbow shape piezoelectric transducer mainly depends on its shape parameters and ma- terial properties from the analysis model. Simulation results show that there is an optimal length ratio to generate maximum en- ergy conversion efficiency and the optimal length ratios and energy conversion efficiencies of beryllium bronze substrate trans- ducer and steel substrate transducer are （0.65, 2.21%） and （0.65, 1.64%） respectively. The optimal thickness ratios and energy conversion efficieneies of beryllium bronze substrate transducer and steel substrate transducer are （1.16, 2.56%） and （1.49, 1.57%） respectively. With the increase of width ratio and initial curvature radius, both the energy conversion efficiencies de- crease. Moreover, beryllium bronze flexible substrate transducer is superior to the steel flexible substrate transducer.

TiO2 Nanoparticles Produced by Electric-Discharge-Nanofluid-Process as Photoelectrode of DSSC

Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and then TiO2 thin film is soaked in the dye N-719 more than 12 h to prepare the photoelectrode device. The TiO2 nanoparticles produced by electric-discharge-nanofluid-process have premium anatase crystal property, and its diameter can be controlled within a range of 20-50 nm. The surface energy zeta potential of nanofluid is from -22 mV to -28.8 mV, it is a stable particle suspension in the deionized water. A trace of surfactant Triton X-100 put upon the surface of ITO glass can produce a uniform and dense TiO2 thin film and heating up the spin platform to 200 oC is able to eliminate mixed surfac-tant. Self-made TiO2 film presents excellent dye absorption performance and even doesn＇t need heat treatment procedure to enhance essential property. Results of energy analysis show the thicker film structure will increase the short-circuit current density that causes higher conversion efficiency. But, as the film structure is large and thick, both the open-circuit voltage and fill factor will decline gradually to lead bad efficiency of dye-sensitized solar cell.

Investigation of operating parameters on CO2 splitting by dielectric barrier discharge plasma

Experiments of CO_2 splitting by dielectric barrier discharge（DBD） plasma were carried out, and the influence of CO_2 flow rate, plasma power, discharge voltage, discharge frequency on CO_2 conversion and process energy efficiency were investigated. It was shown that the absolute quantity of CO_2 decomposed was only proportional to the amount of conductive electrons across the discharge gap,and the electron amount was proportional to the discharge power; the energy efficiency of CO_2 conversion was almost a constant at a lower level, which was limited by CO_2 inherent discharge character that determined a constant gap electric field strength. This was the main reason why CO_2 conversion rate decreased as the CO_2 flow rate increase and process energy efficiency was decreased a little as applied frequency increased. Therefore, one can improve the CO_2 conversion by less feed flow rate or larger discharge power in DBD plasma, but the energy efficiency is difficult to improve.

Power recovery method for testing the efficiency of the ECD of an integrated generation unit for offshore wind power and ocean wave energy

Offshore wind power and ocean wave energy are clean,renewable and rich resources.The integrated generation unit for the two

A Thiazole-Based Polymer Donor for Efficient Organic Solar Cells

The development of new materials plays a critical role in improving the efficiency of organic solar cells(OSCs).At present,the relatively high-lying highest occupied molecular orbital(HOMO)level of the high-efficiency polymer donor is regarded as one of the main reasons for the low open-circuit voltage(V_(OC)).In this work,we introduced the strong electron-withdrawing thiazole unit into the construction of a polymer donor.We designed and prepared an alternating donor-acceptor material,namely PSZ,by copolymerizing 4-methyl thiazole with an electron-donating benzodithiophene unit and studied its application in high-efficiency OSCs.The optical and electrical properties of the new material were characterized by UV-Vis absorption spectroscopy and electrochemical cyclic voltammetry.Results show that PSZ is a typical wide-bandgap material with a high optical bandgap of 2.0 eV and a deep HOMO level of-5.70 eV.When a non-fullerene BTP-eC9 was selected as the acceptor material,V_(OC) reached 0.88 V in the resulting device,and the corresponding power conversion efficiency(PCE)was8.15%.In addition,when PSZ was added as the third component to the binary photoactive combination with PBDB-TF as the donor and BTP-eC9 as the acceptor,V_(OC) of the cell device could be increased,thereby obtaining a high PCE of 17.4%.These results indicated that introducing thiazole units into polymer donors can remarkably reduce the HOMO levels and improve V_(OC) and PCE in OSCs.

Multistage Stack with Multiple Pore Radii Applying the Temperature Gradient to a Thermoacoustic Engine

Conventional thermoacoustic engines have a stack pore radius that is almost constant in the axial direction. Hence, a thermoacoustic engine is expected to improve the energy conversion efficiency using a multistage stack with multiple pore radii. The stack comprises several bundles of numerous narrow tubes with specified pore radii. The optimum pore radius of the stack is determined by the oscillation frequency and the temperature in the stack. Consequently, the suitable pore radius changes in the axial direction, because the temperature gradient exists along the stack axis. Therefore, a multistage stack with multiple pore radii is introduced, which achieves a desired optimum pore radius everywhere in the stack. The energy conversion efficiency of the multistage stack, which was studied experimentally for a straight-tube type thermoacoustic engine, was compared with that of a conventional single-stage stack. In these experiments, the improvement of the energy conversion efficiency was confirmed. A numerical method with the transmittance matrix to include the effect of a multistage stack was used, and good agreement between experimental and numerical results was obtained. The results make a future possibilities for stack design intended to higher thermoacoustic engine efficiency expect.

Boosting the Performance of Solar Cells with Intermediate Band Absorbers--The Case of ZnTe：O

Abstract： This work reports on modeling IB （intermediate band） solar cells based on ZnTe：O semiconductor and determination of their photovoltaic parameters using SCAPS （solar cell capacitance simulator） software. A comparative study between photovoltaic performance of ZnTe and ZnTe：O based solar cells has been carried out. It has been found that the energy conversion efficiency r/, short-circuit current density Jsc, EQE （external quantum efficiency） and FF （fill factor） increased with increasing oxygen doping concentration Nt up to the shallow acceptor density NA and decreased when Nt was higher than NA. The open circuit-voltage Voc remained constant for N lower than the acceptor doping concentration NA and decreased for Nt higher than NA. The increase of , Jsc and FF is due to the fact that IB is fully empted, so sub-bandgap photons can be absorbed by hole photoemission process from the VB （valence band） to the IB. The decrease of r/, J, EQE and FF is attributed to overcompensation for the base doping NA making electron photoemission process from IB to the CB （conduction band） maximized. This indicates that there is a competition between oxygen doping and intrinsic acceptor defects. The optimal concentrations of oxygen and shallow acceptor carriers were found to be Nr 1015 cm-3 and NA 1014 cm3, The corresponding photovoltaic parameters were r/= 41.5%, J = 31.2 mA/cm2, Voc = 1.80 V and FF = 75.1%. Finally, the EQE spectra showed a blue shift of absorption edge indicating that the absorption process is extended to the sub-bandgap photons through lB.