Quantitative energy-dispersive X-ray fluorescence analysis for unknown samples using full-spectrum least-squares regression

The full-spectrum least-squares(FSLS) method is introduced to perform quantitative energy-dispersive X-ray fluorescence analysis for unknown solid samples.Based on the conventional least-squares principle, this spectrum evaluation method is able to obtain the background-corrected and interference-free net peaks, which is significant for quantization analyses. A variety of analytical parameters and functions to describe the features of the fluorescence spectra of pure elements are used and established, such as the mass absorption coefficient, the Gi factor, and fundamental fluorescence formulas. The FSLS iterative program was compiled in the C language. The content of each component should reach the convergence criterion at the end of the calculations. After a basic theory analysis and experimental preparation, 13 national standard soil samples were detected using a spectrometer to test the feasibility of using the algorithm. The results show that the calculated contents of Ti, Fe, Ni, Cu, and Zn have the same changing tendency as the corresponding standard content in the 13 reference samples. Accuracies of 0.35% and 14.03% are obtained, respectively, for Fe and Ti, whose standard concentrations are 8.82% and 0.578%, respectively. However, the calculated results of trace elements (only tens of lg/g) deviate from the standard values. This may be because of measurement accuracy and mutual effects between the elements.

Elemental composition x-ray fluorescence analysis with a TES-based high-resolution x-ray spectrometer

The accurate analysis of the elemental composition plays a crucial role in the research of functional materials.The emitting characteristic x-ray fluorescence(XRF)photons can be used for precisely discriminating the specified element.The detection accuracy of conventional XRF methodology using semiconductor detector is limited by the energy resolution,thus posing a challenge in accurately scaling the actual energy of each XRF photon.We adopt a novel high-resolution x-ray spectrometer based on the superconducting transition-edge sensor(TES)for the XRF spectroscopy measurement of different elements.Properties including high energy resolution,high detection efficiency and precise linearity of the new spectrometer will bring significant benefits in analyzing elemental composition via XRF.In this paper,we study the Ledge emission line profiles of three adjacent rare earth elements with the evenly mixed sample of their oxide components:terbium,dysprosium and holmium.Two orders of magnitude better energy resolution are obtained compared to a commercial silicon drift detector.With this TES-based spectrometer,the spectral lines overlapped or interfered by background can be clearly distinguished,thus making the chemical component analysis more accurate and quantitative.A database of coefficient values for the line strength of the spectrum can then be constructed thereafter.Equipped with the novel XRF spectrometer and an established coefficient database,a direct analysis of the composition proportion of a certain element in an unknown sample can be achieved with high accuracy.

Geochemical analysis of marine sediments using fused glass disc by X-ray fluorescence spectrometry

A method was developed for content determination of Na, Mg, A1, Si, P,S, C1, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Nb, Zr, Y, Sr, Rb, Ba, La and Ce etc. covering 26 major, minor, and trace elements in marine sediment samples using fused glass disc by X-ray Fluorescence spectrometry. Calibration was made using marine sediment certified reference materials and the synthetic standard samples prepared by mixing several marine sediments with stream sediment and carbonate standard samples in different proportions. The matrix effect was corrected using theoretical alpha coefficients, experience coefficients and the scattered radiation as the internal standard （for the trace elements）. The accuracy of the method was evaluated by analysis of certified reference materials GBW07314, GBW07334 and GSMS6. The results are in good agreement with the certified values of the standards with RSD less than 2.60%, except for Y, Cr, Ga, Ce, La, Nb, Rb, and V with RSD less than 9.0% （n=12）.

Elemental and proximate analysis of coal by x-ray fluorescence assisted laser-induced breakdown spectroscopy

Although laser-induced breakdown spectroscopy(LIBS),as a fast on-line analysis technology,has great potential and competitiveness in the analysis of chemical composition and proximate analysis results of coal in thermal power plants,the measurement repeatability of LIBS needs to be further improved due to the difficulty in controlling the stability of the generated plasmas at present.In this paper,we propose a novel x-ray fluorescence(XRF) assisted LIBS method for high repeatability analysis of coal quality,which not only inherits the ability of LIBS to directly analyze organic elements such as C and H in coal,but also uses XRF to make up for the lack of stability of LIBS in determining other inorganic ash-forming elements.With the combination of elemental lines in LIBS and XRF spectra,the principal component analysis and the partial least squares are used to establish the prediction model and perform multi-elemental and proximate analysis of coal.Quantitative analysis results show that the relative standard deviation(RSD) of C is 0.15%,the RSDs of other elements are less than 4%,and the standard deviations of calorific value,ash content,sulfur content and volatile matter are 0.11 MJ kg,0.17%,0.79% and 0.41%respectively,indicating that the method has good repeatability in determination of coal quality.This work is helpful to accelerate the development of LIBS in the field of rapid measurement of coal entering the power plant and on-line monitoring of coal entering the furnace.

Impact of Different Grinding Aids on Standard Deviation in X-Ray Fluorescence Analysis of Cement Raw Meal

X-ray fluorescence (XRF) analysis utilizes particle size which is resulted from milling of a material. The milling ensures uniform and fine grained powder. The finer and more uniform the particle size is, the better the result and easier it is for material quality control. To ensure uniformity in particle size and finer powder, a comparative analysis was conducted with different grinding aids and pressed pellet method was used in obtaining analysis results. Pressed pellets of cement raw meal sample milled with different grinding aids (graphite, aspirin and lithium borate) were subjected to XRF. Graphite produced better particle size uniformity with a corresponding standard deviation that made quality control of raw meal easier and better than aspirin and lithium borate.

X-RAY FLUORESCENCE SPECTRA ANALYSIS ON THE STRUCTURE AROUND Ti^(4+) OF BaO-SiO_2-B_2O_3-TiO_2 SYSTEM GLASSES

The structure around Ti^(4+) in Bao-SiO_2 -B_2O_3-TiO_2 had been studied by X-ray fluorescence spectra. The results show that the Ti^(4+) mainly exists in the [TiO_4] and enters the network of [SiO_4]. [TiO_4] has the tendency to change to [TiO_6] with the increase of TiO_2 con-tent. When the TiO_2 content increases to about 20mol% the tendency reaches its maximum.

Determination of Optimum Conditions for X-Ray Fluorescence Analysis Using Coupling Equations

Coupling equations used to calculate the chemical composition of substances by X-ray fluorescence analysis can be classified as empirical, theoretical or semi-empirical based on the method for determining the coefficients of the calibration function. The advantages and disadvantages of each class of equations are discussed. Recommendations for the selecting the optimum conditions for determining empirical correction coefficients and their control during analysis are provided.

Glancing incidence x-ray fluorescence spectrometry based on a single-bounce parabolic capillary

Glancing incidence x-ray fluorescence spectrometry using a single-bounce parabolic capillary is proposed for the analysis of layered samples.The divergence of the x-ray beam was 0.33 mrad.In this paper,we used this instrumental setup to analyze a Si single crystal and a 50 nm HfO_(2) single-layer film deposited on a Si substrate.

SMONTE CARLO CALCULATION FOR CALIBRATION FUNCTIONS IN TOTAL REFLECTION X-RAY FLUORESCENCE SPECTROMETRY

Simulation approach includes such processes as photon emissions from X-ray tube with a spectral distribution, total reflection on the sample support, photoelectric effect in thin layer sample, as well as characteristic line absorption and detection. The calculation results are in agreement with experimental ones.

Neutron Activation Analysis and Scanning Electron Microscopy of Phytoplankton in the Coastal Zone of Crimea (The Black Sea)

The physiology and ecology of planktonic organisms are influenced by the concentration, chemical speciation and resulting bioavailability of some trace metals. The determination of the elemental structure of phytoplankton is important for interpretation of physiological and functional states of coastal ecosystems. The present study is focused on the structure and elemental composition of the phytoplankton assemblages from the different coastal zones by instrumental neutron activation analysis (INAA), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). For the first time these complementary techniques were simultaneously applied to study the Black Sea phytoplankton. The concentrations of 45 elements in the coastal phytoplankton communities used as bioindicator of inorganic contamination of the Black Sea coastal area near Sevastopol, Ukraine, were determined. Phytoplankton samples were collected by total tows of the plankton net with 35 μm pore size at 3 stations situated in polluted and relatively pristine water areas of the Sevastopol coastal zone during autumn period of the phytoplankton growth. The concentration of Mg, Al, Sc, Ti, V, Mn, As, Rb, Ba, Th and Fe, Cr increases exponentially from relatively pristine station to more polluted station and 10-times and 3-times greater, respectively, in the phytoplankton of the Sevastopol Bay. The rare-earth elements have relatively the same concentration values less than 1 μg/g and tend to accumulate in the phytoplankton from the polluted station in the Sevastopol Bay. The obtained results are in a good agreement with the elemental concentration data in the oceanic plankton, plankton communities from the White Sea and the Black Sea. Using energy-dispersive X-ray spectrometry the mineral particles of unknown origin and impurities of copper (0.42% by weight) in the phytoplankton at the polluted station and zinc (0.57% by weight) at the relatively pristine station were determined.

Influence of crystal materials on the synchrotron X-ray fluorescence analysis:a study of crystal and amorphous clinopyroxene

Synchrotron X-ray fluorescence analyses of crystal and amorphous clinopyroxene were compared. The results showed that using the synchrotron X-ray as a source of energy, the diffraction X-ray of crystal materials will seriously affect the X-ray fluorescence analysis. In order to avoid the influence of diffraction, the best way to solve it is to use the monochromatic source, or to have a collimating slit between sample and Si(Li) detector.

In situ analysis of trace elements in metalloproteins of human liver by synchrotron radiation X-ray fluorescence

A method using synchrotron radiation X-ray fluorescence analysis toin situ determine trace elements during protein electrophoretically separating process was established. The distribution of elements in protein bands for human liver cytosolic sample separated by SDS-PAGE was analyzed along polyacrylamide gel. The results showed that the protein fraction of peak III in cytosol was mainly composed of metal ion Zn-associated proteins, being in agreement with that given by atomic absorption spectrometry. Thus, it demonstrated the feasibility of this novel technique forin situ analysis of trace elements in protein bands.

Quantitative analysis results of CE-1 X-ray fluorescence spectrometer ground base experiment

As the nearest celestial body to the earth, the moon has become a hot spot again in astronomy field recently. The element analysis is a much important subject in many lunar projects. Remote X-ray spectrometry plays an important role in the geochemical exploration of the solar bodies. Because of the quasi-vacuum atmosphere on the moon, which has no absorption of X-ray, the X-ray fluorescence analysis is an effective way to determine the elemental abundance of lunar surface. The CE-1 X-ray fluorescence spectrometer （CE-1/XFS） aims to map the major elemental compositions on the lunar surface. This paper describes a method for quantitative analysis of elemental compositions. A series of ground base experiments are done to examine the capability of XFS. The obtained results, which show a reasonable agreement with the certified values at a 30% uncertainty level for major elements, are presented.

Extraction and characterization of alumina nanopowders from aluminum dross by acid dissolution process

A significant amount of aluminum dross is available as a waste in foundry industries in Bangladesh. In this study, alumina was ex- tracted from aluminum dross collected from two foundry industries situated in Dhamrai and Manikgang, near the capital city, Dhaka. Alu- minum dross samples were found to approximately contain 75wt% A1203 and 12wt% SIO2. An acid dissolution process was used to recover the alumina value from the dross. The effects of various parameters, e.g., temperature, acid concentration, and leaching time, on the extrac- tion of alumina were studied to optimize the dissolution process. First, AI（OH）3 was produced in the form of a gel. Calcination of the AI（OH）3 gel at 1000℃, 1200℃, and 1400℃ for 2 h produced O-AlcOa, （t~＋O）-A1203, and u-alumina powder, respectively. Thermal charac- terization of the AI（OH）3 gel was performed by thermogravimetric/differential thermal analysis （TG/DTA） and differential scanning calo- rimetry （DSC）. The phases and crystallite size of the alumina were determined by X-ray diffraction analysis. The dimensions of the alumina were found to be on the nano level. The chemical compositions of the aluminum dross and alumina were determined by X-ray fluorescence （XRF） spectroscopy. The microstructure and morphology of the alumina were studied with scanning electron microscopy. The purity of the alumina extracted in this study was found to be 99.0%. Thus, it is expected that the obtained alumina powders can be potentially utilized as biomaterials.

Clustering analysis of ancient celadon based on SOM neural network

In the study, chemical compositions of 48 fragments of ancient ceramics excavated in 4 archaeological kiln sites which were located in 3 cities (Hangzhou, Cixi and Longquan in Zhejiang Province, China) have been examined by energy-dispersive X-ray fluorescence (EDXRF) technique. Then the method of SOM was introduced into the clustering analysis based on the major and minor element compositions of the bodies, the results manifested that 48 samples could be perfectly distributed into 3 locations, Hangzhou, Cixi and Longquan. Because the major and minor element compositions of two Royal Kilns were similar to each other, the classification accuracy over them was merely 76.92%. In view of this, the authors have made a SOM clustering analysis again based on the trace element compositions of the bodies, the classification accuracy rose to 84.61%. These results indicated that discrepancies in the trace element compositions of the bodies of the ancient ceramics excavated in two Royal Kiln sites were more distinct than those in the major and minor element compositions, which was in accordance with the fact. We argued that SOM could be employed in the clustering analysis of ancient ceramics.

Source identification of individual PM_(2.5) particles in Shanghai air in the winter of 2007 with synchrotron X-ray fluorescence microprobe

In order to further understand the sources of PM2.5 in Shanghai air, the synchrotron X-ray fluores- cence microprobe at the BL-4A Beamline of Photon Factory of High Energy Accelerator Research Organization, Japan, was applied to analyze the individual PM2.5 particles collected from Shanghai air in the winter of 2007. Eight categories of emission sources were recognized in these individual particles. The source identification shows that most of the analyzed PM2.5 particles are derived from vehicle exhaust and metallurgical emissions. This suggests that the important emission sources of PM2.5 in Shanghai air would be vehicle exhaust and metallurgical activities.

Compositional Distribution and Growth Mode of Garnet Porphyroblasts during Deformation and Metamorphism

Although porphyroblast microstructures play an important role in structural and metamorphic studies, there are still controversies in the interpretation. The focus is how porphyroblasts grow during deformation and metamorphism. In this paper, we introduce a new approach, the Synchrotron Radiation X-Ray Fluorescence, to a hemi-quantitative interpretation of the growth mode of porphyroblasts. The analysis was done at the Beijing Synchrotron Radiation Facility. The specimens were sampled from metapelite of the Baoyintu Group, northern Urad Middle Banner, Inner Mongolia. The new method is successful for determining the microscopic distribution of trace elements in porphybroblasts. The results support the theory of deformation partition, which has been brought forth by Bell and his colleagues, and demonstrate the existence of porphyroblast growth phases and the growth mode of porphyroblasts by hemi-quantitative mineral chemical analysis. The porphyroblast grows stage by stage in the manner of the distribution of a roseleaf and is controlled by deformation. We call the growth stage of porphyroblast a growth phase.

Determination of F,S(total),and Cl in the Calcite Rich Limestone and Marbles by WD-XRF Spectrometry

Determining the contents of F,S(total),and Cl in the studied samples of the limestone and marbles with high calcite contents was carried out by the nondestructive method of WDXRFS(Wavelength Dispersive X-ray Fluorescence Spectrometry).All measurements were performed in a vacuum condition using a WDXRF spectrometer S8 TIGER(Bruker AXS,Germany).The studied samples have wide ranges of F,S(total),and Cl contents,and high concentration of calcite(89.5%-99%).Main objective of this research is to develop WDXRF(WD X-ray fluorescence)technique for the determination of F,S(total),and Cl.The calculated values of the ILD(instrumental limit of the detection)were within the interval from 3 for S(total)to 37 for F mg/kg.The repeatability was found to be satisfactory with the relative standard deviations lower than 7%.

Application of a Portable XRF Spectrometer for <i>In-Situ</i>and Nondestructive Investigation of Pigments in Two 15th Century Icons

A simple portable X-Ray Fluorescence (XRF) spectrometer was successfully used for in-situ and nondestructive identification of the painting materials in two 15th century icons from the Onufri Museum in Beart, Albania. The spectrometer is based on a low power X-ray tube, a thermoelectrically cooled Si PIN detector and the spectrum acquisition system. It was assembled and adjusted at our laboratory for the investigation of the icons. A small number of pigments were clearly identified by X-Ray Fluorescence (XRF) measurements in both icons. This includes Lead white for the white color, gold and yellow ochre for the yellow color, red lead, cinnabar and red ochre for the red color, as well as cooper based pigments for the green color. At the same time, the investigation raised some new questions that need further investigations by the use of additional analytical techniques. The results show that in both icons are used similar pigments, which are in accordance with the Byzantine icon painting tradition.

MATRIX ABSORPTION CORRECTION OF MEDIUM THICK TARGETS IN XRF

This paper deals with the matrix absorption and enhancement effects of thick targets in energy dispersive X-ray fluorescence analysis. Two kinds of absorption correction methods are studied especially for medium thick targets (5-10 mg/cm2). For analysis of hair samples, both the measurement of absorption correction coefficients and the determination of sensitivity factors using an addition method are introduced. Quantitative analysis of medial thick samples is established. The relative deviation between different methods for most of the elements is found to be less than 5 %.