The Construction of Integrated Nursing Model Prevention of Oxaliplatin Chemotherapy-Induced Peripheral Nerve Injury

Objective: To investigate the effect of the integrated nursing model in the prevention of chemotherapy-induced peripheral injury. Methods: A total of 60 tumor patients receiving oxaliplatin for 1 - 6 cycles of chemotherapy from January to September 2023 were selected. 30 patients were selected from January to March and divided into the control group, and 30 patients were selected from July to 9 as the experimental group. The control group received conventional chemotherapy nursing, while the experimental group received integrated nursing. Anxiety, peripheral nerve toxicity stage and quality of life score were compared between the two groups before and after intervention. Results: After intervention, the scores of the self-rating Anxiety Scale (SAS) and the total scores of the oxaliplatin Levi specific sensory neurotoxicity scale in the experimental group were significantly lower than those in the control group, and the differences were statistically significant (P< 0.05);The Quality of Life Scale (FACT-G) score of cancer patients was higher than that of control group, and the difference was statistically significant (P< 0.05). Conclusion: The integrated nursing model can effectively reduce the anxiety of patients, reduce the incidence of peripheral nerve injury and improve the quality of life of patients.

Research on Blended Teaching in Integrated English Course Based on BOPPPS Model

The BOPPPS model has been widely used in information-based teaching reform,which emphasizes studentcentered principles and student participation and interaction,including six steps:bridge-in,objective,pre-assessment,participatory learning,post-assessment,and summary.This paper applies the BOPPPS model in the Integrated English course at the three stages of teaching practice-before class,during class,and after class-to achieve blended teaching.It shows that this teaching mode provides students with a more abundant learning experience,helps to stimulate students’learning interests,and improves their comprehensive language application skills.

Analysis of the Effect of Integrated Extended Care Model in Improving the Quality of Life of Elderly Patients with Type 2 Diabetes Mellitus

Objective: To analyze the impact of an integrated extended care model on improving the quality of life of elderly patients with Type 2 Diabetes Mellitus (T2DM). Methods: A total of 176 patients admitted to the hospital from March 2015 to February 2018 were selected and randomly assigned to an observation group and a control group, with 88 patients each. The control group implemented conventional nursing interventions, and the observation group carried out an integrated extended-care model. The level of glycemic control, quality of life, and daily medication adherence between both groups were compared. Results: The observation group showed significant improvement in the level of glycemic control, and their fasting blood glucose, 2-hour postprandial blood glucose, and glycated hemoglobin levels were significantly lower as compared with those in the study group (P < 0.05). The quality of life of the patients in the observation group was higher than that of the control group (P < 0.05). The observation group had a higher compliance score (95.48 ± 7.45) than the control group (81.31 ± 8.72) (t = 8.909, P < 0.05). Conclusion: The integrated extended care model allows patients to receive comprehensive and individualized nursing services after discharge, which improves the effect of drug therapy and the quality of life of patients.

An integrated modeling method for prediction of sulfur content in agglomerate

Based on the idea of fusing modeling, an integrated prediction model for sintering process was proposed. A framework for sulfur content prediction was established, which integrated multi modeling ways together, including mathematical model combined with neural network(NN), rule model based on empirical knowledge and model-choosing coordinator. Via metallurgic mechanism analysis and material balance computation, a mathematical model calculated the sulfur content in agglomerate by the material balance equation with some parameters predicted by NN method. In the other model, the relationship between sulfur content and key factors was described in the form of expert rules. The model-choosing coordinator based on fuzzy logic was introduced to decide the weight of result of each model according to process conditions. The model was tested by industrial application data and produced a relatively satisfactory prediction error. The model also preferably reflected the varying tendency of sulfur content in agglomerate as the evidence of its prediction performance.

The Model of“Post,Course,Competition,Certificate”Integrated Education for Electronic Information Engineering Technology Major in Higher Vocational Colleges

The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.

Integrated modeling of spacecraft relative motion dynamics using dual quaternion

To realize high accurate control of relative position and attitude between two spacecrafts, the coupling between position and attitude must be fully considered and a more precise model should be established. This paper breaks the traditional divide and conquer idea, and uses a mathematical tool, namely dual quaternion to establish the integrated 6 degree-of-freedom(6-DOF) model of relative position and attitude, which describes the coupled relative motion in a compact and efficient form and needs less information of the target. Considering the complex operation rules and the unclarity of the current relative motion model in dual quaternion, necessary mathematical foundations are given at first, followed by clear and detailed modeling process and analysis. Finally a generalized proportion-derivative(PD) controller law is designed. The simulation results show that based on the integrated model established by dual quaternion, this control law can achieve a high control accuracy of relative motion.

Integrated Modeling of Soil Erosion for a Canadian Watershed in Response to Projected Changes in Climate and Consequent Adoption of Mitigating Best Management Practices

Controlling soil erosion and the transport and deposition of suspended sediment to receiving waters, especially in relation to the modifying influences of, and interplay between, climate and land-use alterations, is essential for effective watershed management. The Atlantic Canada—New England region is expected to experience elevated rainfall erosivity due to climate change over the next century. Using the projected higher precipitation amounts of 5% and 10% for future scenarios of 5 and 25 years for the region, and a spatially-explicit, integrated (GIS, RUSLE) model for a rural watershed in Nova Scotia, predicted increases in total erosion rates of 4.9 and 9.9%, respectively. Modelled scenarios altering buffer strips based on either consistent or slope-variable widths between 30 m (the legal requirement) to 90 m were found to correspond to reductions in predicted total watershed erosion rates from 11% to 32%. Assuming and extending the 1:1 concordance between projected precipitation and estimated soil erosion for this particular watershed into the more distant future of 26 to 55 years, suggests that the 25% increase in soil erosion predicted over this period would have to be offset by expanding the protective buffer strips to a consistent width of 70 m. Adoption of such a protective management scheme would subsume 19% of the terrestrial area of the study watershed and thus consequent reductions in land available for agricultural production and timber harvest.

Heat Transfer Investigation and Modeling of Heat Integrated Distillation Column

The high degree of reversibility of heat integrated distillation column(HIDiC) has been thermodynamically interpreted by the entropy method. In this paper, a heat transfer model and a more universal method were proposed, through which the overall heat transfer coefficient at different height of column under different operating conditions could be obtained before the experiment. Then the separation of a binary ethanol-water system was carried out experimentally as a case study to verify the heat transfer model and the aforementioned calculation method. The close results between the calculation, the simulation, and the experiments suggested that the proposed model and the calculation method in this paper were accurate and applicable. Meanwhile, it was demonstrated that the HIDiC shows obvious effect of reducing entropy increase and improving thermodynamic efficiency as compared to conventional distillation column.

Concise Modeling of Amorphous Dual-Gate In-Ga-Zn-O Thin-Film Transistors for Integrated Circuit Designs

An analytical model for current-voltage behavior of amorphous In-Ga-Zn-O thin-film transistors（a-IGZO TFTs）with dual-gate structures is developed.The unified expressions for synchronous and asynchronous operating modes are derived on the basis of channel charges,which are controlled by gate voltage.It is proven that the threshold voltage of asynchronous dual-gate IGZO TFTs is adjusted in proportion to the ratio of top insulating capacitance to the bottom insulating capacitance（C_（TI）/C_（BI））.Incorporating the proposed model with Verilog-A,a touch-sensing circuit using dual-gate structure is investigated by SPICE simulations.Comparison shows that the touch sensitivity is increased by the dual-gate IGZO TFT structure.

Composition Modeling and Equivalence of an Integrated Power Generation System of Wind, Photovoltaic and Energy Storage Unit

利用间接组合建模的方法,在建立典型的双馈风机、光伏发电单元和储能单元的装置级机电暂态模型基础上,采用等值方法建立三者电站级的机电暂态模型,最终通过组合建模得到了风光储联合发电系统的机电暂态模型。在大型电力系统分析软件包的PSD-BPA暂态稳定程序中实现了风光储联合发电系统的仿真功能,通过典型算例和张北＂国家风光储输示范工程＂的仿真分析验证了模型的正确性,为风光储联合发电系统的并网研究提供了分析手段。

Integrated Process for Production of Surfactin(III)Modeling of Adsorption Column

The study is focused on modeling of separation process and optimization.An adsorption separation process is simulated.The surfactin production process by Bacillus subtilis ATCC 21332 followed by surfactin adsorption in a fixed-bed column packed with commercial active carbon is studied in laboratory.The adsorption column achieves high surfactin recovery(94%)by up-flow methanol elution at 25°C.The adsorption column is simulated with a complex one-dimensional plug flow dispersion model coupled with nonlinear adsorption equilibrium,based on the assumption that the adsorption of surfactin is monomolecular layer and no micelle is formed.The molecular diffusion coefficient of surfactin in water solution with electric neutrality is estimated to be 0.428×10 -5 cm 2 ·s -1 by molecular dynamics simulation.The model developed can describe the complex interplay of adsorption kinetics,fluid dynamics,and mass-transfer phenomena based on the assumption of no radial temperature and concentration gradients,and is of adequate precision.The work involved in this paper is valuable for the optimization of the production process of surfactin.

Modeling and Analysis of Internal Heat Integrated Distillation Columns

A generalized steady-state model is being developed for an internal heat integrated distillation column (IHIDiC). A procedure incorporating the Newton-Raphson method is devised for solving the model equations. Separation of an ethanol-water binary mixture is simulated and analyzed with the model. Two pinch points are found within the process, making the separation extremely difficult and expensive. Two sharp fronts in the temperature and the composition profiles are being observed. With the introduction of heat integration, satisfactory separation may be obtained in a limited number of stages with lower reflux ratios. Increasing the pressure difference between the rectifying and the stripping sections, however, would bring about a reduced relative volatility between the two components involved, creating adverse separation performances. It is obvious that optimization of the IHIDiC is of prime importance.

A Metamodel-Driven Business Process Modeling Methodology and Its Integrated Environment for Reusing Business Processes

Reusing business process models and best practices can improve the productivity, quality and agility in the early development phases of enterprise software systems. To help developers reuse the business process models and best practices, we propose a methodology and an integrated environment for business process modeling driven by the metamodel. Furthermore, we propose a process-template design method to unify the granularity and separate the commonality and variability of business processes so that business process models can be reused across different enterprise software systems. The proposed methodology enables to create reuse-oriented business process templates before the business process modeling. To support the proposed methodology, we developed an integrated environment for creating, reusing and verifying the business process models. As the key techniques, we describe the methodology and its integrated environment, including a metamodel and notations. We applied the methodology and integrated environment to an actual enterprise software development project, and evaluated that the productivity of business process modeling is improved by at least 46%. As the conclusion, this paper contributes to prove the effectiveness of the meta-model driven business process modeling methodology for the reuse of business process models.

Thermal Modeling of a Multilayer Integrated LC Filter for Temperature Distribution Calculation

Thermal behavior of integrated passive components has become an important issue when designing these components. This paper presents the thermal modeling of a multilayer integrated LC filter used in DC-DC step-down converter for temperature distribution calculation. The approach used for this analysis is based on thermal equivalent circuit. Temperature distribution is obtained from algebraic equation, which is in vector and matrix form. The results of analytical calculation are compared with simulation results from finite element method. These results showed a good correlation.

APPLICATION OF HYBRID AERO-ENGINE MODEL FOR INTEGRATED FLIGHT/PROPULSION OPTIMAL CONTROL

The real-time capability of integrated flight/propulsion optimal control （IFPOC） is studied. An appli- cation is proposed for IFPOC by combining the onboard hybrid aero-engine model with sequential quadratic pro- gramming （SQP）. Firstly, a steady-state hybrid aero-engine model is designed in the whole flight envelope with a dramatic enhancement of real-time capability. Secondly, the aero-engine performance seeking control including the maximum thrust mode and the minimum fuel-consumption mode is performed by SQP. Finally, digital simu- lations for cruise and accelerating flight are carried out. Results show that the proposed method improves real- time capability considerably with satisfactory effectiveness of optimization.

A Thermal-Conscious Integrated Circuit Power Model and Its Impact on Dynamic Voltage Scaling Techniques

We propose a novel thermal-conscious power model for integrated circuits that can accurately predict power and temperature under voltage scaling. Experimental results show that the leakage power consumption is underestimated by 52 % if thermal effects are omitted. Furthermore, an inconsistency arises when energy and temperature are simultaneously optimized by dynamic voltage scaling. Temperature is a limiting factor for future integrated circuits,and the thermal optimization approach can attain a temperature reduction of up to 12℃ with less than 1.8% energy penalty compared with the energy optimization one.

U-Net Models for Representing Wind Stress Anomalies over the Tropical Pacific and Their Integrations with an Intermediate Coupled Model for ENSO Studies

El Niño-Southern Oscillation(ENSO)is the strongest interannual climate mode influencing the coupled ocean-atmosphere system in the tropical Pacific,and numerous dynamical and statistical models have been developed to simulate and predict it.In some simplified coupled ocean-atmosphere models,the relationship between sea surface temperature(SST)anomalies and wind stress(τ)anomalies can be constructed by statistical methods,such as singular value decomposition(SVD).In recent years,the applications of artificial intelligence(AI)to climate modeling have shown promising prospects,and the integrations of AI-based models with dynamical models are active areas of research.This study constructs U-Net models for representing the relationship between SSTAs andτanomalies in the tropical Pacific;the UNet-derivedτmodel,denoted asτUNet,is then used to replace the original SVD-basedτmodel of an intermediate coupled model(ICM),forming a newly AI-integrated ICM,referred to as ICM-UNet.The simulation results obtained from ICM-UNet demonstrate their ability to represent the spatiotemporal variability of oceanic and atmospheric anomaly fields in the equatorial Pacific.In the ocean-only case study,theτUNet-derived wind stress anomaly fields are used to force the ocean component of the ICM,the results of which also indicate reasonable simulations of typical ENSO events.These results demonstrate the feasibility of integrating an AI-derived model with a physics-based dynamical model for ENSO modeling studies.Furthermore,the successful integration of the dynamical ocean models with the AI-based atmospheric wind model provides a novel approach to ocean-atmosphere interaction modeling studies.

Application of multidisciplinary team-based integrated traditional Chinese medicine and Western medicine in rotator cuff injury patients undergoing arthroscopic surgery

BACKGROUND Arthroscopic rotator cuff repair is a common surgical treatment for rotator cuff injuries(RCIs).Although this procedure has certain clinical advantages,it requires rehabilitation management interventions to ensure therapeutic efficacy.AIM To investigate the effect of integrated traditional Chinese medicine and Western medicine(TCM-WM)under the multidisciplinary team(MDT)model on the postoperative recovery of patients undergoing arthroscopic surgery for RCIs.METHODS This study enrolled 100 patients who underwent arthroscopic rotator cuff repair for RCIs at the Seventh People’s Hospital of Shanghai University of Traditional Chinese Medicine between June 2021 and May 2024.They were divided into a control group(n=48)that received routine rehabilitation treatment and an experimental group(n=52)that received TCM-WM under the MDT model(e.g.,acupuncture,TCM traumatology and orthopedics,and rehabilitation).The results of the Constant–Murley Shoulder Score(CMS),Visual Analogue Scale(VAS),Shoulder Pain and Disability Index(SPADI),muscular strength evaluation,and shoulder range of motion(ROM)assessments were analyzed.RESULTS After treatment,the experimental group showed significantly higher CMS scores in terms of pain,functional activity,shoulder joint mobility,and muscular strength than the baseline and those of the control group.The experimental group also exhibited significantly lower VAS and SPADI scores than the baseline and those of the control group.In addition,the experimental group showed significantly enhanced muscular strength(forward flexor and external and internal rotator muscles)and shoulder ROM(forward flexion,abduction,and lateral abduction)after treatment compared with the control group.CONCLUSION TCM-WM under the MDT model improved shoulder joint function,relieved postoperative pain,promoted postoperative functional recovery,and facilitated the recovery of muscular strength and shoulder ROM in patients with RCIs who underwent arthroscopic rotator cuff repair.