Effect of Partial Replacement of Fly Ash by Decoration Waste Powder on the Fresh and Mechanical Properties of Geopolymer Masonry Mortar

This study aims to investigate the feasibility of using decoration waste powder(DWP)as a partial replacement for fly ash(FA)in the preparation of geopolymer masonry mortar,and to examine the effect of different DWP replacement rates(0%-40%)on the fresh and mechanical properties of the mortar.The results showed that each group of geopolymer masonry mortar exhibited excellent water retention performance,with a water retention rate of 100%,which was due to the unique geopolymer mortar system and high viscosity of the alkaline activator solution.Compared to the control group,the flowability of the mortar containing lower contents of DWP(10%and 20%)was higher.However,as the DWP replacement rate further increased,the flowability gradually decreased.The DWP could absorb the free water in the reaction system of geopolymer mortar,thereby limiting the occurrence of geopolymerization reaction.The incorporation of DWP in the mortar resulted in a decrease in compressive strength compared to the mortar without DWP.However,even at a replacement rate of 40%,the compressive strength of the mortar still exceeded 15 MPa,which met the requirements of the masonry mortar.It was feasible to use DWP in the geopolymer masonry mortar.Although the addition of DWP caused some performance loss,it did not affect its usability.

Nest decoration:Black feathers prevent Crested Mynas from nest usurpation

Nests are important structures for birds to raise their offspring and for signaling.Many birds incorporate feathers into the nest,since feathers were traditionally thought to serve the function of insulation.Hypotheses in recent years have considered that some birds place feathers in conspicuous locations in the nest for decoration to trigger a fear response in the competitors.In this study,we investigated whether decorative feathers could deter nest usurpation by Crested Mynas(Acridotheres cristatellus)by manipulating nest box contents.The results revealed that Crested Mynas preferred black feathers to white feathers as decorations and occupied nest boxes decorated with black feathers significantly less than those decorated with white feathers,suggesting that black decorative feathers in the nest could be more effective in preventing nest usurpation by Crested Mynas and that white decorative feathers may have other functions.The black feathers in the nest are prominently placed at the edge of the nest to convey the message that“this nest is occupied”or“the owner of this nest has been preyed upon”to visitor Crested Mynas,thus effectively preventing them from usurping the nest at a later stage.

Research on the cognitive process of building energy-saving reminder information: Review and prospects

Traditional building energy-saving research focuses on technical energy-saving and energy system energy-saving,while neglecting the study of personnel's energy-consumption behavior during the building operation phase.In order to explore people's cognitive process of building energy-saving information,this paper focuses on the representativeness of the research on building energy-saving reminder information.The results are summarized,sorted out and analyzed.Based on relevant research at home and abroad,this paper reviews the conceptual connotation of building energy-saving reminder information,research methods and influencing factors on the recognition of building energy-saving reminder information.Finally,it summarizes the research landscape of the cognitive process of building energy-saving reminder information and analyzes the existing research.In light of the shortcomings,three major research directions are proposed in the future:integrating research scenarios and focusing on the interaction of multiple scenarios in the Chinese cultural environment;broadening research methods to explore the diversity and feasibility of emerging research methods;increasing the time span and improving experimental design dynamic and continuous.

Impact of Sharing Marketing on Marketing Willingness of Employees in Internet Decoration Industry

With the development of information technology,sharing marketing,as an innovative marketing method,plays an important role in promoting the marketing willingness and enthusiasm of employees in the Internet decoration industry.Based on the data obtained from the ques-tionnaire survey,this paper makes an empirical analysis of the impact of the economic value,social value,perceived ease of use,perceived convenience,enabling conditions and subjective norms of sharing marketing on the marketing willingness of employees in the Internet decoration industry.The results showed that the questionnaire had good internal consistency and construct validity.Through empirical analysis,it can be found that the economic value,social value,perceived ease of use,perceived convenience,enabling conditions and subjective norms of sharing marketing have a significant positive impact on employees'marketing willingness.

Energy-Saving Distributed Flexible Job Shop Scheduling Optimization with Dual Resource Constraints Based on Integrated Q-Learning Multi-Objective Grey Wolf Optimizer

The distributed flexible job shop scheduling problem(DFJSP)has attracted great attention with the growth of the global manufacturing industry.General DFJSP research only considers machine constraints and ignores worker constraints.As one critical factor of production,effective utilization of worker resources can increase productivity.Meanwhile,energy consumption is a growing concern due to the increasingly serious environmental issues.Therefore,the distributed flexible job shop scheduling problem with dual resource constraints(DFJSP-DRC)for minimizing makespan and total energy consumption is studied in this paper.To solve the problem,we present a multi-objective mathematical model for DFJSP-DRC and propose a Q-learning-based multi-objective grey wolf optimizer(Q-MOGWO).In Q-MOGWO,high-quality initial solutions are generated by a hybrid initialization strategy,and an improved active decoding strategy is designed to obtain the scheduling schemes.To further enhance the local search capability and expand the solution space,two wolf predation strategies and three critical factory neighborhood structures based on Q-learning are proposed.These strategies and structures enable Q-MOGWO to explore the solution space more efficiently and thus find better Pareto solutions.The effectiveness of Q-MOGWO in addressing DFJSP-DRC is verified through comparison with four algorithms using 45 instances.The results reveal that Q-MOGWO outperforms comparison algorithms in terms of solution quality.

Operation optimization strategy of existing residential building energy-saving renovation market:From the perspective of subject behavior

The energy-saving renovation of existing residential buildings is a crucial measure to achieve the strategic goal of energy conservation and emission reduction in China and build ecologically livable cities.This article focuses on the perspective of subject behavior,starting from analyzing the current situation and difficulties of the operation of the energy-saving renovation market for existing residential buildings in China,drawing on the practical experience of the operation of the existing residential building energy-saving renovation market abroad.Based on principles such as systematicity,humanization,feasibility,and sustainability,the article constructs an operation optimization system of the existing residential building energy-saving renovation market from the perspective of subject behavior.In order to provide a reference for the healthy and orderly operation of the existing residential building energy-saving renovation market,this paper proposes implementation strategies for optimizing the operation of the existing residential building energy-saving renovation market.Suggestions are proposed from four aspects:optimizing the market environment,innovating the financing model,building the information sharing platform,and utilizing the synergies of the main subjects.

Energy-Saving Construction Technologies for Buildings

The development of the construction industry is shifting towards low-carbon construction,so it is necessary to improve and optimize related construction concepts,methods,and processes.By improving resource and energy control efficiency in building projects,minimizing construction waste,and reducing environmental impact,a foundation for the sustainable development of the industry can be established.This paper mainly analyzes the significance of low-carbon energy-saving construction technology and the control factors of construction,summarizes the status quo of the development of building energy-saving construction,and puts forward strategies for applying building energy-saving construction technology.These strategies serve to achieve low-carbon and energy-saving goals to promote the healthy development of energy-saving construction.

Application of Energy-Saving Materials in Architectural Design

The conventional process of building construction is associated with issues such as the waste of construction materials and environmental pollution.Sustainable development highlights the importance of energy conservation and eco-friendly practices.It is essential to use energy-efficient and green materials in building designs to ensure the healthy growth of construction companies.This article discusses the advantages and principles of incorporating energy-saving materials in architectural design.It examines the strategies and critical control points for using energy-saving materials in architectural design,offering guidance for the sustainable development of the construction industry.

Energy-Saving Effect of Discolored Decorative Boards in Flexible Interior Space

Green,energy conservation and environmental protection have increasingly become the theme of the sustained and healthy development of cities against the background of new urbanization,which indicates that the problem of building energy consumption has received growing attention.This paper explores the impact of energy-saving decorations in flexible interior space on energy-saving effect of buildings so as to broaden the horizon of energy conservation in building,thereby alleviating the problem of energy shortage in China.

Study on Traditional Architectural Decoration Patterns of Temple of the Three Sus

Temple of the Three Sus,which was first established during the Yuan Dynasty,features a natural,unrestrained,and classically elegant garden architectural style.This paper discusses the multiple characteristics and meanings of traditional architectural decorative patterns at Temple of the Three Sus from a semiotic perspective.First,it analyzes the denotative aspects of these patterns,including their stylistic forms,structural frameworks,and craftsmanship techniques.Second,the paper classifies the traditional architectural decorative patterns of the Temple of the Three Sus based on the types of sources of these patterns and interprets the implied meanings of each.Finally,the paper explores the application of these traditional decorative patterns in modern urban design,specifically in Meishan City,discussing the inheritance and innovation of these patterns in contemporary urban design and emphasizing the importance of integrating tradition with modernity.

Exploration of Energy-Saving Technologies in Building Electrical System Design

Green energy conservation is the mainstream trend in the current development of the construction industry.The application of energy-saving technology in building electrical system design can effectively reduce energy consumption,avoid unnecessary energy consumption,and truly achieve energy conservation and environmental protection.Based on this,the article elaborates on the principles of energy-saving design in building electrical systems,and actively explores the application of energy-saving technologies from different perspectives such as optimizing power supply and distribution system design,adopting high-efficiency energy-saving lighting equipment,applying renewable energy,promoting smart home technology,and improving the efficiency of building electrical equipment.

Low-carbon and Energy-saving Designs Preserving Primitive Ecological Conditions——With the Planning of Ancient Banyan Park in Mengshan County,Guangxi,China as a Case Study

It was proposed that park planning should be based on local economic development,should focus on the preservation of primitive ecological conditions and the application of low-carbon and energy-saving concepts.The planning of Ancient Banyan Park in Mengshan County by following the principles of respecting local history and culture,improving functions and supporting facilities,human-centered,overall planning and all-around consideration,respecting characteristics of the local area(the planning site),satisfying operation requirements of the park,applying low-carbon and energy-saving concepts,and avoiding over-engineering,aimed at protecting natural images of the park,primitive history,culture and characteristics of the local area and providing a space for local residents' various activities.Modern aesthetic forms were combined,cultural connotation of natural environment stressed to build a landscape space system of the Ancient Banyan Park that matches well with environment of the planning site.The park was designed into 4 functional areas:sport area,fitness plaza area,garden recreational area and ancient banyan cultural area.Different functions of these subareas were taken into consideration to create conservation-minded garden landscapes which were both independent and unified.

Current Situation of Houseplant Decoration in Suzhou City

On the basis of investigation of status of houseplant decoration in modern commercial space,banks,hospitals,hotel hall,dining space,library and office in Suzhou City,the paper analyzed its characters,pointed out their shortcomings and put forward reasonable suggestions.

Primary Study on the Artistic Value of Interior Decoration of Ancient Huizhou Folk Houses

From the creation,materials,colors and technical artistic characteristics of exterior and exterior spatial decoration,the artistic value of ancient Huizhou folk houses were analyzed.

Energy-saving Architectural Designs for Relocation Residential Districts in North Jiangsu Province of China

By investigating present relocation residential districts for peasants whose houses are removed for the unified planning of rural areas in north Jiangsu Province, as well as residents' feelings about the environment of residential district, main architectural structures and energy consumption conditions, the indoor thermal environment, use of main heating and cooling facilities, residents' satisfaction on the acoustical and luminous environment, major space-enclosing structures and calculation of energy-saving designs are analyzed, and suggestions are given for the architectural design of relocation residential districts in the study area. It is stressed that the relationship between energy conservation and architectural layout, orientation, lighting, ventilation, selection of enclosing-structure materials, facade, color and style should be properly handled in the planning, and the focus is to control building orientation and shape coefficient, on the basis of which energy-saving designs of windows, exterior walls and roofs can be done. Energy consumption of present residential buildings is calculated and analyzed to bring forth new ideas to the energy-saving designs for relocation residential districts in north Jiangsu Province, and establish an architectural energy-saving system suitable for climatic and natural conditions of north Jiangsu to instruct the energy-saving designs of relocation residential districts in the study area.

Excavator Energy-saving Efficiency Based on Diesel Engine Cylinder Deactivation Technology

The hydraulic excavator energy-saving research mainly embodies the following three measures： to improve the performance of diesel engine and hydraulic component, to improve the hydraulic system, and to improve the power matching of diesel-hydraulic system-actuator. Although the above measures have certain energy-saving effect, but because the hydraulic excavator load changes frequently and fluctuates dramatically, so the diesel engine often works in high-speed and light load condition, and the fuel consumption is higher. Therefore, in order to improve the economy of diesel engine in light load, and reduce the fuel consumption of hydraulic excavator, energy management concept is proposed based on diesel engine cylinder deactivation technology. By comparing the universal characteristic under diesel normal and deactivated cylinder condition, the mechanism that fuel consumption can be reduced significantly by adopting cylinder deactivation technology under part of loads condition can be clarified. The simulation models for hydraulic system and diesel engine are established by using AMESim software, and fuel combustion consumption by using cylinder-deactivation-technology is studied through digital simulation approach. In this way, the zone of cylinder deactivation is specified. The testing system for the excavator with this technology is set up based on simulated results, and the results show that the diesel engine can still work at high efficiency with part of loads after adopting this technology; fuel consumption is dropped down to 11% and 13% under economic and heavy-load mode respectively under the condition of driving requirements. The research provides references to the energy-saving study of the hydraulic excavators.

Green,Sustainable Architectural Bamboo with High Light Transmission and Excellent Electromagnetic Shielding as a Candidate for Energy-Saving Buildings

Currently,light-transmitting,energy-saving,and electromagnetic shielding materials are essential for reducing indoor energy consumption and improving the electromagnetic environment.Here,we developed a cellulose composite with excellent optical transmittance that retained the natural shape and fiber structure of bamboo.The modified whole bamboo possessed an impressive optical transmittance of approximately 60%at 6.23 mm,illuminance of 1000 luminance(lux),water absorption stability(mass change rate less than 4%),longitudinal tensile strength(46.40 MPa),and surface properties(80.2 HD).These were attributed to not only the retention of the natural circular hollow structure of the bamboo rod on the macro,but also the complete bamboo fiber skeleton template impregnated with UV resin on the micro.Moreover,a multilayered device consisting of translucent whole bamboo,transparent bamboo sheets,and electromagnetic shielding film exhibited remarkable heat insulation and heat preservation performance as well as an electromagnetic shielding performance of 46.3 dB.The impressive optical transmittance,mechanical properties,thermal performance,and electromagnetic shielding abilities combined with the renewable and sustainable nature,as well as the fast and efficient manufacturing process,make this bamboo composite material suitable for effective application in transparent,energy-saving,and electromagnetic shielding buildings.

Effects of crystallinity, {001}/{101} ratio, and Au decoration on the photocatalytic activity of anatase TiO_2 crystals

Anatase TiO2 nanocrystals and sub-microcrystals with truncated octahedral bipyramidal morphologies were prepared by direct calcination of TiOF2 precursors. The as-prepared TiO2 samples were thoroughly characterized by X-ray diffraction, Raman spectroscopy, field-emission scanning electron microscopy, N2 adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and UV-visible diffuse spectroscopy. It was found that the crystallinity, grain size, and {001}/{101} ratio of the samples can be increased by raising the calcination temperature from 500 to 800℃. The higher crystallinity and {001}/{101} facet ratio resulted in an increase in both aqueous and gas-phase photocatalytic activities, by inhibiting the recombination and separation of electrons and holes. After selecting two TiO2 samples with high crystallinity and {001}/{101} ratio, Au nanoparticles were decorated on their surfaces, and the photocatalytic activity of the resulting samples under visible light illumination was studied. It was found that the visible light-induced photocatalytic activity increased by 2.6 and 4.8 times, respectively, upon Au decoration of the samples prepared by calcination of TiOF2 at 700 and 800℃.

Surface free energy of copper-zinc alloy for energy-saving of boiler

Cu-Zn,Cu-Zn-Sn,Cu-Zn-Ni alloys were melted by vacuum smelter.The effect factors to the surface free energy of the alloys such as chemical composition,crystal structure and surface crystal lattice distortion etc.were investigated by OCA30 automatic contact angle test instrument,metallography microscope and XRD instrument etc.Results suggests:adding alloy element to Cu may increase its surface free energy,and the more kinds of alloy elements are added,the more surface free energy increases;the alloy element Sn an increase the surface free energy of Cu-Zn alloy;Cu-Zn alloy with fir-tree crystal structure,great phase discrepancy and obvious composition aliquation has greater surface free energy;Cu-Zn alloy with compounds and serious surface crystal lattice distortion has greater surface free energy.

Spatial Analysis of Interior "Soft Decoration"

By interpreting the definition of "soft decoration",this study puts forward that such a decoration way can keep the weaknesses of a house unexposed,highlight the smart designs,re-divide and recombine interior spaces and fill empty spaces,so that deficiencies of hard decoration in a house can be made up,by playing the role of soft decoration in refining interior spaces and improving their functions.Moreover,it is proposed that "devoting less in hard decoration but more in soft decoration" will be a new trend of interior decoration.