Application of Specialized Group Management in the Quality Control of Perioperative Nursing

Objective:To explore the role of specialized group management in the quality control of perioperative nursing.Methods:45 surgical nurses from our hospital were selected as the research subjects.Traditional operating room management was adopted from July 2019 to June 2020,and specialized group management was adopted from July 2020 to June 2021.The surgeon’s satisfaction,surgical nurses’core professional competence,and surgical patients’satisfaction were obtained through surveys and the results were analyzed.Results:Surgeon satisfaction before the implementation of specialized group management was significantly lower than after its implementation(P<0.05).Besides,surgical nurses’core professional competency scores before the implementation of specialized group management were significantly lower than after its implementation(P<0.05).Lastly,surgical patients’satisfaction before the implementation of specialized group management was significantly lower than after its implementation(P<0.05).Conclusion:Specialized group management helps to improve the quality of perioperative care and should be applied in clinical practice.

Evaluation of the Impact of Refined Quality Control Management Model on the Qualified Rate of Disinfection and Sterilization of Surgical Instruments in the Sterilization Supply Center

Objective:To evaluate the application value of a refined quality control management model for a sterilization supply center.Methods:A retrospective analysis was conducted on the work situation of the sterilization supply center from January 2021 to January 2023.The work situation before January 31,2022,was classified as the control group;a routine quality control management model was implemented,and the work situation after January 31,2022,was classified as the observation group.The quality of medical device management and department satisfaction between the two groups were compared.Results:The timely recovery and supply rate,classification and cleaning pass rate,disinfection pass rate,packaging pass rate,sterilization pass rate,and department satisfaction score in the observation group were all higher than those of the control group(P<0.05).Conclusion:Implementing a refined quality control management model in the sterilization supply center can improve the quality management level of medical devices and department satisfaction and is worthy of promotion.

Analysis of Hospital Budget Management Control Based on Smart Hospital

Hospitals are crucial healthcare facilities where patients seek treatment,and effective budget management within hospitals significantly impacts their operational efficiency and financial performance.In the age of information technology and advanced healthcare solutions,the emergence of smart hospitals represents a new trend in the medical industry’s evolution.Leveraging modern information technology can enhance the development of hospital IT systems and drive budget management toward greater intelligence.This paper begins by analyzing the influence of smart hospitals on hospital budget control.It then examines the current state of budget management control within smart hospitals.Finally,it proposes several strategies for budget management control in smart hospitals,aiming to provide guidance for relevant stakeholders.

Analysis of the Current Situation of Cost Management and Control of Highway Construction Projects

The highway engineering process is complex,coupled with a relatively long construction period,hence requires increased coordination between participating units to prevent economic disputes and efficiency losses.The main body of the construction project needs to strengthen the management and control of funds.In this regard,this paper analyzes the importance of cost management in highway projects by clarifying and analyzing the current cost management status quo problems and causes.The highway engineering cost control strategy and implementation methods are summarized to provide references for improving the quality of highway engineering.

Research on the Application of Evidence-Based Quality Control Circle to Improve the Implementation Rate of Airway Management Measures in Adult Critically Ill Patients

Objective: To explore the effect of evidence-based quality control circle (QCC) in improving the implementation rate of airway management measures in adult critically ill patients. Methods: Based on the Joanna Briggs Institute (JBI) evidence-based health care model, the best evidence of airway management in adult critically ill patients was obtained and applied to the clinic. Results: The total implementation rate of airway management measures in adult critically ill patients increased from 23.62% before the implementation of quality control circle to 88.82%, and the pulmonary infection rate in critically ill patients decreased from 42.31% to 21.74%, with statistical significance between the two groups (P 0.05). Conclusion: Evidence-based quality control circle activities can standardize the practice standards of airway management in critically ill patients, reduce the occurrence of patients’ airway related complications, and improve clinical outcomes.

Construction Project Management and Construction Quality Control Strategy

With the gradual acceleration of the urbanization process,the construction industry has been developing rapidly.As the key link to ensure the quality and safety of the project,construction management and construction quality control are of great significance to enhance the competitiveness of construction enterprises and realize sustainable development.In this paper,the effective strategy of construction management and the effective strategy of construction quality control will be discussed in depth,aiming at providing useful management and quality control strategies for construction enterprises.

Research on Procurement Cost Control Based on Supply Chain Management

In modern enterprise management,strengthening the control and management of procurement processes can effectively reduce operational costs.However,with the continuous reform and improvement of China’s market economy system,competition among supply chain enterprises has intensified.The traditional procurement management model is no longer able to meet the needs of enterprise development in the current era.As a result,procurement management based on supply chain management has emerged,offering significant improvements in the scientific management of procurement processes.It has become an important means of promoting the long-term development of enterprises.This paper primarily analyzes and studies procurement cost control based on supply chain management,providing insights for reference.

Cost Management and Cost Control of Photovoltaic Projects

With the rapid development of the photovoltaic(PV)industry and policy support,photovoltaic engineering has attracted much attention as a clean energy project.However,the complexity and huge investment scale of photovoltaic projects make cost management and cost control the key to project success.The purpose of this paper is to discuss the cost management and cost control strategies of photovoltaic projects,analyze their importance and challenges in the process of project implementation,and discuss the common cost control methods and techniques in photovoltaic projects,to improve cost management and cost control in photovoltaic projects,and to provide a reference for the sustainable development of the industry.

Application Effect of Feedforward Control in Outpatient Blood Specimen Management

Objective:To analyze the application effect of feedforward control in outpatient blood specimen management.Methods:1,200 patients who had their venous blood collected in outpatient phlebotomy room of our hospital's outpatient clinic from January 2021 to April 2021 were selected as study subjects and divided into 600 cases in the control group and 600 cases in the observation group.The two groups of patients were compared in terms of their satisfaction with the staff,the efficiency of the nurses and the quality of nursing care,turnaround time before specimen analysis,the rejection rate of the blood specimens,and the time of result reporting.Results:After the implementation of feedforward control,patients'satisfaction with staff,nurses work efficiency and quality of care,turnaround time before specimen analysis,specimen rejection rate,and result reporting time in the observation group were significantly higher than those in the control group(P<0.05).Conclusion:The application of feedforward control in the management of outpatient blood specimens has significant effect,which effectively improves patients'satisfaction,enhances the efficiency of nurses and the quality of nursing care,shortens the turnaround time of specimens before analysis and the reporting time of results,and reduces the rejection rate of specimens.

Internal Control Management and Risk Prevention Measures of State-Owned Enterprises

As an important pillar of national economic development,state-owned enterprises,their operational efficiency,and risk management ability are directly related to the stability and security of the national economy.As an important part of enterprise management,internal control management plays an irreplaceable role.Especially in the current domestic and international economic situation is complex and changeable,market competition is increasingly fierce environment,to strengthen the internal control management of state-owned enterprises and risk prevention measures is particularly important.This paper starts with the importance of internal control management and risk prevention for state-owned enterprises,and analyzes the problems and strategies in the internal control management and risk prevention of state-owned enterprises,in order to build a more comprehensive and efficient risk management system for state-owned enterprises to adapt to the ever-changing market environment and realize sustainable development.

Analysis of Internal Control Management Problems in Hospital Finance and Accounting

This paper outlines the internal control management of hospital accounting and finance,introducing its concept,importance,and objectives.It then analyzes the problems existing in the internal control management of hospital accounting and finance,including an unsound management system,insufficient system implementation,inadequate risk assessment and control capabilities,poor information communication,weak internal supervision,and uneven personnel quality.The reasons for these problems are also analyzed,including outdated management concepts,irrational organizational structures,imperfect training and incentive mechanisms,low levels of information technology,and changes in the external environment.This paper proposes improvement measures for the internal control management of hospital accounting,including enhancing the management system,strengthening system implementation,improving risk assessment and control capabilities,enhancing the information communication mechanism,strengthening internal supervision,improving personnel quality,advancing information technology,and adapting to changes in the external environment.

Methods of vendor managed inventory control in supply chain management

By inducing the typical inventory control problem - the bullwhip effect, this paper presents vendor managed inventory (VMI) control methods on the basis of traditional methods of inventory management methods, constructs a VMI mathematics model, and analyzes the influence of VMI on inventory cost and channel profit. Finally, a special case is studied to verify that VMI is an effective supply chain strategy that can not only increase channel profit of supplier and customer but also improve full channel coordination, thereby reducing the bullwhip effect.

Cold Chain Logistics Equipment Management and Control Based on Internet of Things

The status and supporting policies of cold chain logistics equipment man- agement and control in China were described. The connotation of Internet of Things and its impact on cold chain logistics equipment management and control were ana- lyzed from external form to internal nature. Through introducing the value chain and relevant equipments of cold chain logistics, the correlation between the main technologies in Internet of Things and the common indices for cold chain logistics equipment management and control was analyzed in detail. The application values of Internet of Things technologies in cold chain logistics equipment management and control were illustrated, including the sample analysis on the application of radio-frequency identification （RFID）. After the establishment of BSC performance evaluation index system of cold chain logistics equipment management and control, the optimization measures and suggestions on cold chain logistics equipment management and control under Internet of Things were put forward.

Research on Technological Support System of Control and Management of Rural Tourism Safety

As the sources of overt and covert potential safety hazards were widespread, the safety control and management of rural tourism became more complicated and difficult, which required more for technological support of rural tourism safety management. Based on the latitude of technological support, from the perspective of management practice of rural tourism safety, through analysis on inner symbiosis of management and technological support of rural tourism safety, the paper had studied three parts of control and management system of rural tourism safety, which were rural tourism safety identification, rural tourism safety isolation and control, and rural tourism safety treatment and solution; and the connotation of technological support during safety management had been discussed from the three aspects. It hoped to serve as reference for tourism safety management and control, so as to promote healthy, stable and sustainable development of tourism.

Design and analysis of an advanced thermal management system for the solar close observations and proximity experiments spacecraft

In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.

Fundamentals of modern ground control management in Australian underground coal mines

Underground coal mining is inherently hazardous,with uncontrolled ground failure regarded as one of only several critical risks for multiple fatality events.Development,implementation and management of overarching systems and procedures for maintaining strata control is an important step to mitigating the impact of ground failure hazards at a mine site operational level.This paper summarised the typical pro-active ground control management system(PGCMS)implemented in various Australian underground coal mines.Australia produces approximately 100 million tonnes a year of metallurgical and thermal coal from approximately 30 of the world’s safest longwall mines operating in New South Wales and Queensland.The increased longwall productivity required to achieve both high levels of safety and profitability,places significant emphasis on the reliability of pro-active ground control management for longwall mining operations.Increased depths,adverse geological conditions,elevated variable stress regimes and weaker ground conditions,coupled with an industry wide need for increased development rates continue to make ground control management challenging.Ground control management is not only about ground support and pillar design though but also a structured process that requires a coordinated effort from all levels of the workforce to both minimise the occurrence of adverse geotechnical events and mitigate the potential risks when they do occur.The PGCMS presented in this paper is proven to provide both a safer and more productive mine environment through minimisation of unplanned delays.The critical elements of the method are presented in detail and demonstrate the utility and value of a ground control management system that has potential for implementation in underground coal mining globally.

Sensor management of LEO constellation based on covariance control

This paper studies the multi-sensor management problem for low earth orbit(LEO) infrared warning constellation used to track a midcourse missile. A covariance control approach, which selects sensor combinations or subset based on the difference between the desired covariance matrix and the actual covariance of each target, is used for sensor management, including some matrix metrics to measure the differentia between two covariance matrices. Besides, to meet the requirements of the space based warning system, the original covariance control approach is improved. Simulation results demonstrate that the covariance control approach is able to provide a better tracking performance by providing a well-designed desired covariance and balance tracking performance goals with system demands.

Decentralized Control for Residential Energy Management of a Smart Users' Microgrid with Renewable Energy Exchange

This paper presents a decentralized control strategy for the scheduling of electrical energy activities of a microgrid composed of smart homes connected to a distributor and exchanging renewable energy produced by individually owned distributed energy resources. The scheduling problem is stated and solved with the aim of reducing the overall energy supply from the grid, by allowing users to exchange the surplus renewable energy and by optimally planning users' controllable loads. We assume that each smart home can both buy/sell energy from/to the grid taking into account time-varying non-linear pricing signals. Simultaneously, smart homes cooperate and may buy/sell locally harvested renewable energy from/to other smart homes. The resulting optimization problem is formulated as a non-convex non-linear programming problem with a coupling of decision variables in the constraints. The proposed solution is based on a novel heuristic iterative decentralized scheme algorithm that suitably extends the Alternating Direction Method of Multipliers to a non-convex and decentralized setting. We discuss the conditions that guarantee the convergence of the presented algorithm. Finally, the application of the proposed technique to a case study under several scenarios shows its effectiveness.

Research Progress of Parallel Control and Management

Based on ACP(artificial systems,computational experiments,and parallel execution)methodology,parallel control and management has become a popularly systematic and complete solution for the control and management of complex systems.This paper focuses on summarizing comprehensive review of the research literature of parallel control and management achieved in the recent years including the theoretical framework,core technologies,and the application demonstration.The future research,application directions,and suggestions are also discussed.

A FUZZY-LOGIC CONTROL ALGORITHM FOR ACTIVE QUEUE MANAGEMENT IN IP NETWORKS

Active Queue Management (AQM) is an active research area in the Internet community. Random Early Detection (RED) is a typical AQM algorithm, but it is known that it is difficult to configure its parameters and its average queue length is closely related to the load level. This paper proposes an effective fuzzy congestion control algorithm based on fuzzy logic which uses the pre- dominance of fuzzy logic to deal with uncertain events. The main advantage of this new congestion control algorithm is that it discards the packet dropping mechanism of RED, and calculates packet loss according to a preconfigured fuzzy logic by using the queue length and the buffer usage ratio. Theo- retical analysis and Network Simulator (NS) simulation results show that the proposed algorithm achieves more throughput and more stable queue length than traditional schemes. It really improves a router's ability in network congestion control in IP network.