An Empirical Study of the Socratic Method in Nongraded English Teaching in Senior High School Under the Background of the New National College Entrance Examination

With the reform of the New National College Entrance Examination(Gaokao),the nongraded education will become an inevitable trend.In senior high school,the traditional test-oriented education is popular.The knowledge is mainly taught by the teachers,and the students passively absorb it.This study examines a problem-oriented Socratic experiment in nongraded English teaching in senior high school.The teachers seek output from students,who respond by interpreting questions,fostering critical thinking,and enhancing problem-solving skills.This teaching experiment indicates that the Socratic method has a significant positive effect on cultivating nongraded senior high English students’critical thinking under the New National College Entrance Examination.

Evaluation of Entrance Skin Dose from Paediatric Diagnostic X-Ray Examination

As children are prone to be more radiosensitive than adults, it is imperative to assess the Entrance Skin Doses (ESDs) for patients being examined by X-rays, in order to ensure the optimization of dose while considering a number of other fickles. The ESD received by 50 paediatrics (aged 1-13 years) undergoing 8 types of X-ray examinations were measured at Federal Teaching Hospital, Ido-Ekiti, Ekiti, Nigeria, within a period of February 2019 to March 2020 using thermoluminescent dosimeters. The mean ± SD of ESDs were 0.85 ± 0.32, 2.04 ± 0.75, 0.60 ± 0.07, 0.62 ± 0.22, 0.57 ± 0.24, 1.75 ± 0.76, 0.93 ± 0.31 and 0.63 ± 0.06 mGy for Chest, Skull, Hand, Forearm, Knee, Abdomen, Leg and Feet, respectively. The mean ESDs were found to be within the recommended reference dose in all examinations, except for the Chest examination which was higher. The data obtained in this study will serve as existing data in Nigeria for future research works, as it would assist in optimizing dose to patients, especially the paediatrics.

Research on Traffic Safety at Tunnel Entrance and Exit

Highway tunnel entrances have a high rate of expressway traffic accidents.In this paper,the reasons for the high incidence of traffic accidents at highway tunnel entrances are analyzed in detail,and corresponding solutions are proposed,hoping to provide some reference to relevant parties.

Entrance Effect on Load Capacity of Orifice Compensated Aerostatic Bearing with Feeding Pocket

The current research of the aerostatic thrust bearing mainly focuses on the porous material bearing and inherent compensated air bearing, which aims at obtaining small physical dimension and large load capacity. Although porous material bearing appears larger load capacity, materials anisotropy itself and void content distortion caused in heat-treating, and machining processes add greater complexity to internal flow transfer process. Inherent compensated air bearing has the advantages of simple structure and good stability, but its load capacity and static stiffness is not worth somewhat. In this paper, based on hydrostatic lubrication theory, finite volume method is presented for taking entrance effects into account in computing pressure distribution, load capacity and mass flow rates of circular aerostatic thrust bearings. Technical analysis, numerical simulations and laboratory demonstration tests of influence of pocket diameter and pocket depth on loading capacity of aerostatic thrust bearing are carried out on simple orifice compensated air bearings with feeding pockets. The static parameters, such as air consumption and pressure distributions, are measured as a function of supply pressure and air gap height for several different orifices and pockets size. Entrance effects are described in term of typical throttling types, and the effect of pocket diameter and pocket depth on load capacity is systematically described respectively. The proposed research results uncover the causation of throttling action of the orifice compensated air bearing with feed pocket and further develop and improve the design theory of air bearing.

Effects of Magnetic Particles Entrance Arrangements on Mixing Efficiency of a Magnetic Bead Micromixer

In this study, a computer code is developed to numerically investigate a magnetic bead micromixer under different conditions. The micromixer consists of a microchannel and numerous micro magnetic particles which enter the micromixer by fluid flows and are actuated by an alternating magnetic field normal to the main flow. An important feature of micromixer which is not considered before by researchers is the particle entrance arrangement into the micromixer. This parameter could effectively affect the micromixer efficiency. There are two general micro magnetic particle entrance arrangements in magnetic bead micromixers: determined position entrance and random position entrance. In the case of determined position entrances, micro magnetic particles enter the micromixer at specific positions of entrance cross section. However, in a random position entrance,particles enter the microchannel with no order. In this study mixing efficiencies of identical magnetic bead micromixers which only differ in particle entrance arrangement are numerically investigated and compared.The results reported in this paper illustrate that the prepared computer code can be one of the most powerful and beneficial tools for the magnetic bead micromixer performance analysis. In addition, the results show that some features of the magnetic bead micromixer are strongly affected by the entrance arrangement of the particles.

Entrance and Exit Defects During Coarse Pitch Orbital Drilling of Carbon Fiber Reinforced Plastic Plates

Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typical defects.Meanwhile,tear is more obvious than burr,and more entrance tears emerge than exit tears.As one of the major causes of entrance and exit defects in CPOD,cutting forces were substaintially studied by contrast experiments.Then,the effect of cutting parameters on entrance and exit tear was qualitatively analyzed through a single factor test.Experiment results indicate that the variation of rotation speed has little influence on entrance and exit tear.Increasing tangential feed per tooth can enlarge entrance tear,but bring little effect on exit tear.By increasing axial feed pitch,the hole entrance and exit show severe tear.When revolution radius grows bigger and bigger,entrance and exit tear firstly decreases,and then increases.Finally,the models of tear and delamination during CPOD of CFRP were established,the formation mechanisms of entrance and exit defects were revealed,and the control strategies were accordingly put forward.

Impact of pertinent parameters on foam behavior in the entrance region of porous media:mathematical modeling

Foam injection is a promising solution for control of mobility in oil and gas field exploration and development,including enhanced oil recovery,matrix-acidization treatments,contaminated-aquifer remediation and gas leakage prevention.This study presents a numerical investigation of foam behavior in a porous medium.Fractional flow method is applied to describe steady-state foam displacement in the entrance region.In this model,foam flow for the cases of excluding and including capillary pressure and for two types of gas,nitrogen(N2)and carbon dioxide(CO2)are investigated.Effects of pertinent parameters are also verified.Results indicate that the foam texture strongly governs foam flow in porous media.Required entrance region may be quite different for foam texture to accede local equilibrium,depending on the case and physical properties that are used.According to the fact that the aim of foaming of injected gas is to reduce gas mobility,results show that CO2 is a more proper injecting gas than N2.There are also some ideas presented here on improvement in foam displacement process.This study will provide an insight into future laboratory research and development of full-field foam flow in a porous medium.

First demonstration of improving laser propagation inside the spherical hohlraums by using the cylindrical laser entrance hole

The octahedral spherical hohlraums have natural superiority in maintaining high radiation symmetry during the entire capsule implosion process in indirect drive inertial confinement fusion.While,in contrast to the cylindrical hohlraums,the narrow space between the laser beams and the spherical hohlraum wall is usually commented.In this Letter,we address this crucial issue and report our experimental work conducted on the SGIII-prototype laser facility which unambiguously demonstrates that a simple design of cylindrical laser entrance hole(LEH)can dramatically improve the laser propagation inside the spherical hohlraums.In addition,the laser beam deflection in the hohlraum is observed for the first time in the experiments.Our 2-dimensional simulation results also verify qualitatively the advantages of the spherical hohlraums with cylindrical LEHs.Our results imply the prospect of adopting the cylindrical LEHs in future spherical ignition hohlraum design.

Safety Analysis of Riding at Intersection Entrance Using Video Recognition Technology

To study riding safety at intersection entrance,video recognition technology is used to build vehicle-bicycle conflict models based on the Bayesian method.It is analyzed the relationship among the width of nonmotorized lanes at the entrance lane of the intersection,the vehicle-bicycle soft isolation form of the entrance lane of intersection,the traffic volume of right-turning motor vehicles and straight-going non-motor vehicles,the speed of right-turning motor vehicles,and straight-going non-motor vehicles,and the conflict between right-turning motor vehicles and straight-going nonmotor vehicles.Due to the traditional statistical methods,to overcome the discreteness of vehicle-bicycle conflict data and the differences of influencing factors,the Bayesian random effect Poisson-log-normal model and random effect negative binomial regression model are established.The results show that the random effect Poisson-log-normal model is better than the negative binomial distribution of random effects;The width of non-motorized lanes,the form of vehicle-bicycle soft isolation,the traffic volume of right-turning motor vehicles,and the coefficients of straight traffic volume obey a normal distribution.Among them,the type of vehicle-bicycle soft isolation facilities and the vehicle-bicycle traffic volumes are significantly positively correlated with the number of vehicle-bicycle conflicts.The width of non-motorized lanes is significantly negatively correlated with the number of vehicle-bicycle conflicts.Peak periods and flat periods,the average speed of right-turning motor vehicles,and the average speed of straight-going non-motor vehicles have no significant influence on the number of vehicle-bicycle conflicts.

A STUDY ON FLOW RESISTANCE IN THE ENTRANCE REGION OF ISOSCELES TRIANGULAR DUCTS

In the present paper the variational solution of velocity profile for an incompressible laminar and fully developed flow in isosceles triangular ducts is derived by applying the Kantovorich method. The theoretical and experimental results of pressure loss are also given. The velocity distribution model, additional pressure loss coefficient and calculating method of inlet length in the entrance region of isosceles triangular ducts are also derived, which are suitable for various kinds of vertex angles. The calculations and experiments are also performed for two models: the isosceles triangular channels with vertex angles 2a=45.1 and 2a= 60 . Comparisons are made between the theoretical analysis in this paper and those of the other authors. It can be seen that the present analytical result is of high. accuracy and wide practicability, and agrees well with the authors' experiment.

The Analysis of Edge Entrance Pattern of Internet Services and Its Influences

New concept of'edge entrance'is put forward anda new analyzing framework of'edge entrance pattern'is established from the perspective of economicsthrough studying the technologic nature of Internetsystem.Based on this framework and under differentmarket structures,sequential game models are builtand Internet services are taken as the typical objectsto analyze the phenomenon of edge entrance.Theinfluences of edge entrance of Internet services aresummarized finally and the conclusions show thatInternet services can integrate from edge intomainstream,apart from the driving forces from technologyand market demands,'edge'attribute is alsoone of the main reasons.

ENTRANCE LAWS FOR DAWSON-WATABE SUPERPROCESSES WITH NONLOCAL BRANCHING

This paper proves a 1-1 correspondence between minimal probability entrance laws for the superprocess and entrance laws for its underlying process. From this the author deduces that an infinitely divisible probability entrance law for the superprocess is uniquely determined by an infinitely divisible probability measure on the space of the underlying entrance laws. Under an additional condition, a characterization is given for all entrance laws for the superprocess, generalizing the results of Dynkin (1989). An application to immigration processes is also discussed.

Landscapes in the Building Entrance Space: A Case Study of Huacheng Square in Guangzhou

Huacheng Square is located at the core node of Zhujiang New Town,the new central axis of Guangzhou.It is a typical case in Guangzhou in the plant landscape.Taking Huacheng Square for example,this study investigates and analyzes the landscape in the entrance space of Huacheng Square from the aspects of plants,waterscapes,landscape ornaments and facilities and pavements,and summaries the stratified mixed plant configuration pattern of the entrance space of Huacheng Square,with a view to providing references for landscape design in other parts of Guangzhou and even South China.

Analysis and Simulation of Acceptance Gap Control System for Complicated Entrance Ramp on HighClass Roadway

The acceptance gap micro control system applies to the entrance ramp in which the prior consideration is given to the merging safety. Based on the actual condition of interchanges and the vehicle composition in our country, the traffic characteristics for high class roadways are analyzed and the system simulation model is developed. A simulation example is also given in the paper. Through the simulation, the optimal ramp control plan can be obtained.

A Study on Location of Facilities of Acceptable Gap Control System of the Entrance Ramp on Expressway

The concept of control system of acceptable gap in the entrance ramp, the construction of the minimum acceptable gap and the method of determining it are introduced. On the above-mentioned basis and by taking the Chinas reality into consideration, the issues on the design of control system of acceptable gap are approached in this paper.

Detection of keyhole entrance and exit in plasma arc welding

Sensing of keyhole shape and size is important for controlling of plasma arc welding process. In this study, a synchronous vision system is developed by using two CCD cameras to observe the keyhole entrance and exit simultaneously. Experiments are conducted on stainless steel workpiece, Whole keyhole exit image and part of keyhole entrance image are captured synchronously under different welding conditions. Image processing and calibration algorithms are proposed. The boundary and front point of the keyhole entrance and exit are extracted respectively. The effects of welding current and welding speed on ,front point of keyhole entrance and exit are analyzed. Compared to the front point of the keyhole entrance, the position of the front point of the keyhole exit is better to reflect the variation of the welding parameters.

Evaluation of Entrance Skin Radiation Exposure Dose for Pediatrics Examined by Digital Radiography at Asser Central Hospital-KSA

Assessment of entrance skin doses for patients in Digital radiography examinations should be made as a means for the optimization of the radiation protection of the patients. We measured the entrance skin dose (ESD) received by 50 pediatrics undergoing 12 types of diagnostic X-ray examination at Radiology Department of Asser Central Hospital-KSA. The entrance skin dose ESD was determined via measurements parameters: focus to skin distance (FSD), tube current (mAs) and tube voltage (kV) in arithmetical equation. The mean ± SD for ESDs were found to be 0.16 ± 0.03, 0.21 ± 0.01, 0.63 ± 0.26, 0.55 ± 0.09, 0.15 ± 0.05, 0.27 ± 0.06, 0.41 ± 0.19, 0.46 ± 0.18, 0.46 ± 0.12, 0.20 ± 0.02, 0.39 ± 0.01, 0.29 ± 0.03, for PA chest, foot, AP pelvis, PA skull, PA hand, AP arm, ankle, AP shoulder, abdomen, forearm, AP femur, AP elbow consequently. Our study is considered as an attempt to evaluate the ESDs received by digital radiographic x-ray machine for children aged between 2 - 15 years old, taking in our considerations number of other variables. The mean ESD values obtained are found to be within the standard reference. The data obtained may add to the available information in national records for general use. It may provide guidance on where efforts on dose reduction will need to be directed to fulfill the requirements of the optimization process and serve as a reference for future researches.

Entrance Region Flow of Herschel-Bulkley Fluid in an Annular Cylinder

The entrance region flow of a Herschel-Bulkley fluid in an annular cylinder has been investigated numerically without making prior assumptions on the form of velocity profile within the boundary layer region. This velocity distribution is determined as part of the procedure by cross sectional integration of the momentum differential equation for a given distance z from the channel entrance. Using the macroscopic mass and momentum balance equation, the entrance length at each cross section of the entrance region of the annuli and pressure distribution have been calculated for specific values of Herschel-Bulkley number and various values of aspect ratio and flow behavior index. The effects of non-Newtonian characteristics and channel width on the velocity profile, pressure distribution and the entrance length have been discussed.